Remove `unwrap` from `match_trait_method`
Unused_IO_amount relies on `match_trait_method` in order to match trait methods that exist in Tokio traits as the corresponding symbols don't exist.
With this commit we remove the unwrap that caused #12366.
Note: author (`@m-rph)` and `@GuillaumeGomez` couldn't replicate #12366.
changelog:none
r? `@blyxyas`
Unused_IO_amount relies on `match_trait_method` in order to match
trait methods that exist in Tokio traits as the corresponding symbols don't exist.
With this commit we remove the unwrap that may have caused 12366.
Note: author (@m-rph) and @GuillaumeGomez couldn't replicate 12366.
hir: Remove `opt_local_def_id_to_hir_id` and `opt_hir_node_by_def_id`
Also replace a few `hir_node()` calls with `hir_node_by_def_id()`.
Follow up to https://github.com/rust-lang/rust/pull/120943.
[`unused_enumerate_index`]: trigger on method calls
The lint used to check for patterns looking like:
```rs
for (_, x) in some_iter.enumerate() {
// Index is ignored
}
```
This commit further checks for chained method calls constructs where we
can detect that the index is unused. Currently, this checks only for the
following patterns:
```rs
some_iter.enumerate().map_function(|(_, x)| ..)
let x = some_iter.enumerate();
x.map_function(|(_, x)| ..)
```
where `map_function` is one of `all`, `any`, `filter_map`, `find_map`,
`flat_map`, `for_each` or `map`.
Fixes#12411.
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: [`unused_enumerate_index`]: add detection for method chains such as `iter.enumerate().map(|(_, x)| x)`
The lint used to check for patterns looking like:
```rs
for (_, x) in some_iter.enumerate() {
// Index is ignored
}
```
This commit further checks for chained method calls constructs where we
can detect that the index is unused. Currently, this checks only for the
following patterns:
```rs
some_iter.enumerate().map_function(|(_, x)| ..)
let x = some_iter.enumerate();
x.map_function(|(_, x)| ..)
```
where `map_function` is one of `all`, `any`, `filter_map`, `find_map`,
`flat_map`, `for_each` or `map`.
Fixes#12411.
lint when calling the blanket `Into` impl from a `From` impl
Closes#11150
```
warning: function cannot return without recursing
--> x.rs:9:9
|
9 | / fn from(value: f32) -> Self {
10 | | value.into()
11 | | }
| |_________^
|
note: recursive call site
--> x.rs:10:13
|
10 | value.into()
| ^^^^^^^^^^^^
```
I'm also thinking that we can probably generalize this lint to #11032 at some point (instead of hardcoding a bunch of impls), like how rustc's `unconditional_recursion` works, at least up to one indirect call, but this still seems useful for now :)
I've also noticed that we use `fn_def_id` in a bunch of lints and then try to get the node args of the call in a separate step, so I made a helper function that does both in one. I intend to refactor a bunch of uses of `fn_def_id` to use this later
I can add more test cases, but this is already using much of the same logic that exists for the other impls that this lint looks for (e.g. making sure that there are no conditional returns).
changelog: [`unconditional_recursion`]: emit a warning inside of `From::from` when unconditionally calling the blanket `.into()` impl
add documentation to the `span_lint_hir` functions
As far as I could tell, these weren't documented anywhere, and since this is sometimes needed over `span_lint` for `#[allow]` attrs to work, I thought I would add a little bit of documentation.
When I started with clippy development, I also had no idea what these functions were for.
changelog: none
New lint `const_is_empty`
This lint detects calls to `.is_empty()` on an entity initialized from a string literal and flag them as suspicious. To avoid triggering on macros called from generated code, it checks that the `.is_empty()` receiver, the call itself and the initialization come from the same context.
Fixes#12307
changelog: [`const_is_empty`]: new lint
Add asm goto support to `asm!`
Tracking issue: #119364
This PR implements asm-goto support, using the syntax described in "future possibilities" section of [RFC2873](https://rust-lang.github.io/rfcs/2873-inline-asm.html#asm-goto).
Currently I have only implemented the `label` part, not the `fallthrough` part (i.e. fallthrough is implicit). This doesn't reduce the expressive though, since you can use label-break to get arbitrary control flow or simply set a value and rely on jump threading optimisation to get the desired control flow. I can add that later if deemed necessary.
r? ``@Amanieu``
cc ``@ojeda``
Add stubs in IR and ABI for `f16` and `f128`
This is the very first step toward the changes in https://github.com/rust-lang/rust/pull/114607 and the [`f16` and `f128` RFC](https://rust-lang.github.io/rfcs/3453-f16-and-f128.html). It adds the types to `rustc_type_ir::FloatTy` and `rustc_abi::Primitive`, and just propagates those out as `unimplemented!` stubs where necessary.
These types do not parse yet so there is no feature gate, and it should be okay to use `unimplemented!`.
The next steps will probably be AST support with parsing and the feature gate.
r? `@compiler-errors`
cc `@Nilstrieb` suggested breaking the PR up in https://github.com/rust-lang/rust/pull/120645#issuecomment-1925900572
Currently many diagnostic modifier methods are available on both
`Diagnostic` and `DiagnosticBuilder`. This commit removes most of them
from `Diagnostic`. To minimize the diff size, it keeps them within
`diagnostic.rs` but changes the surrounding `impl Diagnostic` block to
`impl DiagnosticBuilder`. (I intend to move things around later, to give
a more sensible code layout.)
`Diagnostic` keeps a few methods that it still needs, like `sub`,
`arg`, and `replace_args`.
The `forward!` macro, which defined two additional methods per call
(e.g. `note` and `with_note`), is replaced by the `with_fn!` macro,
which defines one additional method per call (e.g. `with_note`). It's
now also only used when necessary -- not all modifier methods currently
need a `with_*` form. (New ones can be easily added as necessary.)
All this also requires changing `trait AddToDiagnostic` so its methods
take `DiagnosticBuilder` instead of `Diagnostic`, which leads to many
mechanical changes. `SubdiagnosticMessageOp` gains a type parameter `G`.
There are three subdiagnostics -- `DelayedAtWithoutNewline`,
`DelayedAtWithNewline`, and `InvalidFlushedDelayedDiagnosticLevel` --
that are created within the diagnostics machinery and appended to
external diagnostics. These are handled at the `Diagnostic` level, which
means it's now hard to construct them via `derive(Diagnostic)`, so
instead we construct them by hand. This has no effect on what they look
like when printed.
There are lots of new `allow` markers for `untranslatable_diagnostics`
and `diagnostics_outside_of_impl`. This is because
`#[rustc_lint_diagnostics]` annotations were present on the `Diagnostic`
modifier methods, but missing from the `DiagnosticBuilder` modifier
methods. They're now present.
There are lots of functions that modify a diagnostic. This can be via a
`&mut Diagnostic` or a `&mut DiagnosticBuilder`, because the latter type
wraps the former and impls `DerefMut`.
This commit converts all the `&mut Diagnostic` occurrences to `&mut
DiagnosticBuilder`. This is a step towards greatly simplifying
`Diagnostic`. Some of the relevant function are made generic, because
they deal with both errors and warnings. No function bodies are changed,
because all the modifier methods are available on both `Diagnostic` and
`DiagnosticBuilder`.
Implement intrinsics with fallback bodies
fixes#93145 (though we can port many more intrinsics)
cc #63585
The way this works is that the backend logic for generating custom code for intrinsics has been made fallible. The only failure path is "this intrinsic is unknown". The `Instance` (that was `InstanceDef::Intrinsic`) then gets converted to `InstanceDef::Item`, which represents the fallback body. A regular function call to that body is then codegenned. This is currently implemented for
* codegen_ssa (so llvm and gcc)
* codegen_cranelift
other backends will need to adjust, but they can just keep doing what they were doing if they prefer (though adding new intrinsics to the compiler will then require them to implement them, instead of getting the fallback body).
cc `@scottmcm` `@WaffleLapkin`
### todo
* [ ] miri support
* [x] default intrinsic name to name of function instead of requiring it to be specified in attribute
* [x] make sure that the bodies are always available (must be collected for metadata)
