Disable the evaluation cache when in intercrate mode
It's possible to use the same `InferCtxt` with both
an intercrate and non-intercrate `SelectionContext`. However,
the local (inferctxt) evaluation cache is not aware of this
distinction, so this kind of `InferCtxt` re-use will pollute
the cache wth bad results.
This commit avoids the issue by disabling the evaluation cache
entirely during intercrate mode.
Simplify lazy DefPathHash decoding by using an on-disk hash table.
This PR simplifies the logic around mapping `DefPathHash` values encountered during incremental compilation to valid `DefId`s in the current session. It is able to do so by using an on-disk hash table encoding that allows for looking up values directly, i.e. without deserializing the entire table.
The main simplification comes from not having to keep track of `DefPathHashes` being used during the compilation session.
Skip single use lifetime lint for generated opaque types
Fix: #77175
The opaque type generated by the desugaring process of an async function uses the lifetimes defined by the originating function. The DefId for the lifetimes in the opaque type are different from the ones in the originating async function - as they should be, as far as I understand, and could therefore be considered a single use lifetimes, this causes the single_use_lifetimes lint to fail compilation if explicitly denied. This fix skips the lint for lifetimes used only once in generated opaque types for an async function that are declared in the parent async function definition.
More info in the comments on the original issue: 1 and 2
Avoid codegen for Result::into_ok in lang_start
This extra codegen seems to be the cause for the regressions in max-rss on #86034. While LLVM will certainly optimize the dead code away, avoiding it's generation in the first place seems good, particularly when it is so simple.
#86034 produced this [diff](https://gist.github.com/Mark-Simulacrum/95c7599883093af3b960c35ffadf4dab#file-86034-diff) for a simple `fn main() {}`. With this PR, that diff [becomes limited to just a few extra IR instructions](https://gist.github.com/Mark-Simulacrum/95c7599883093af3b960c35ffadf4dab#file-88988-from-pre-diff) -- no extra functions.
Note that these are pre-optimization; LLVM surely will eliminate this during optimization. However, that optimization can end up generating more work and bump memory usage, and this eliminates that.
Use explicit log level in tracing instrument macro
Specify a log level in tracing instrument macro explicitly.
Additionally reduce the used log level from a default info level to a
debug level (all of those appear to be developer oriented logs, so there
should be no need to include them in release builds).
Move the Lock into symbol::Interner
This makes it easier to make the symbol interner (near) lock free in case of concurrent accesses in the future.
With https://github.com/rust-lang/rust/pull/87867 landed this shouldn't affect performance anymore.
Fast reject for NeedsNonConstDrop
Hopefully fixes the regression in #88558.
I've always wanted to help with the performance of rustc, but it doesn't feel the same when you are fixing a regression caused by your own PR...
r? `@oli-obk`
inline(always) on check_recursion_limit
r? `@oli-obk`
#88558 caused a regression, this PR adds `#[inline(always)]` to `check_recursion_limit`, a possible suspect of that regression.
Rollup of 10 pull requests
Successful merges:
- #86422 (Emit clearer diagnostics for parens around `for` loop heads)
- #87460 (Point to closure when emitting 'cannot move out' for captured variable)
- #87566 (Recover invalid assoc type bounds using `==`)
- #88666 (Improve build command for compiler docs)
- #88899 (Do not issue E0071 if a type error has already been reported)
- #88949 (Fix handling of `hir::GenericArg::Infer` in `wrong_number_of_generic_args.rs`)
- #88953 (Add chown functions to std::os::unix::fs to change the owner and group of files)
- #88954 (Allow `panic!("{}", computed_str)` in const fn.)
- #88964 (Add rustdoc version into the help popup)
- #89012 (Suggest removing `#![feature]` for library features that have been stabilized)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Suggest removing `#![feature]` for library features that have been stabilized
Issue: https://github.com/rust-lang/rust/issues/88802
Delayed the check if #![feature] has been used to enable lib features in a non-nightly build to occur after TyCtxt has been constructed.
Add rustdoc version into the help popup
After a discussion with a rustdoc user about a specific behaviour, we realized we were not talking about the same version. To add on top of it, it was actually not that simple to find out the version since it was hosted documentation.
So to simplify things, I added the version into the help popup:
Does the version format looks or would you prefer that I add more information? We can also add the commit hash, commit date, host and release.
cc `@rust-lang/rustdoc`
r? `@jyn514`
Allow `panic!("{}", computed_str)` in const fn.
Special-case `panic!("{}", arg)` and translate it to `panic_display(&arg)`. `panic_display` will behave like `panic_any` in cosnt eval and behave like `panic!(format_args!("{}", arg))` in runtime.
This should bring Rust 2015 and 2021 to feature parity in terms of `const_panic`; and hopefully would unblock the stabilisation of #51999.
`@rustbot` modify labels: +T-compiler +T-libs +A-const-eval +A-const-fn
r? `@oli-obk`
Add chown functions to std::os::unix::fs to change the owner and group of files
This is a straightforward wrapper that uses the existing helpers for C
string handling and errno handling.
Having this available is convenient for UNIX utility programs written in
Rust, and avoids having to call unsafe functions like `libc::chown`
directly and handle errors manually, in a program that may otherwise be
entirely safe code.
In addition, these functions provide a more Rustic interface by
accepting appropriate traits and using `None` rather than `-1`.
Fix handling of `hir::GenericArg::Infer` in `wrong_number_of_generic_args.rs`
Fixes#87563. More precisely, I have fixed the "index out of bounds" error, which is what #87563 is about. The example given there still ICEs due to running into this `todo!()`, but I'd say that this is a separate issue:
c3c0f80d60/compiler/rustc_typeck/src/astconv/mod.rs (L460-L463)
Do not issue E0071 if a type error has already been reported
Fixes#88844. A suggested fix is already included in the error message for E0412, so with my changes, E0071 is simply not emitted anymore if the type in question is a "type error". This makes sense, I think, because we cannot confidently state that something is "not a struct" if we couldn't resolve it properly; and it's unnecessary to pollute the output with this additional error message, as it is a direct consequence of the former error.
I have also addressed the issue mentioned in https://github.com/rust-lang/rust/issues/88844#issuecomment-917324856 by changing the fixed example in the documentation to more closely match the erroneous code example.
Improve build command for compiler docs
It was rather complicated to document rustc crates. With this, you can directly run:
```console
x.py doc compiler
x.py doc compiler/rustc_hir_pretty
```
The second commit adds the handling of the `--open` flag.
r? `@Mark-Simulacrum`
Point to closure when emitting 'cannot move out' for captured variable
Attempts to fix#87456. The error message now points to the capturing closure, but I was not able to explain _why_ the closure implements `Fn` or `FnMut` (`TypeckResults::closure_kind_origins` did not contain anything for the closure in question).
cc `@Aaron1011`
Remove concept of 'completion' from the projection cache
Fixes#88910
When we initially store a `NormalizedTy` in the projection cache,
we discard all obligations that we can (while ensuring that we
don't cause any issues with incremental compilation).
Marking a projection cache entry as 'completed' discards all
obligations associated with it. This can only cause problems,
since any obligations stored in the cache are there for a reason
(e.g. they evaluate to `EvaluatedToOkModuloRegions`).
This commit removes `complete` and `complete_normalized` entirely.
Set the library path in sysroot-crates-are-unstable
Most of the `run-make-fulldeps` tests use a make-driven rustc command
that includes `HOST_RPATH_DIR` in the library path, but this particular
test runs from python instead. When the toolchain is built without
`rpath` enabled, we need that library path in the environment so it can
find its own libraries.
PassWrapper: handle separate Module*SanitizerPass
Change ab41eef9aca3 in LLVM split MemorySanitizerPass into
MemorySanitizerPass for functions and ModuleMemorySanitizerPass for
modules. There's a related change for ThreadSanitizerPass, and in here
since we're using a ModulePassManager I only add the module flavor of
the pass on LLVM 14.
r? `@nikic` cc `@nagisa`
Improve error message for type mismatch in generator arguments
Fixes#88653. The code example given there is invalid because the `Generator` trait (unlike the `Fn` traits) does not take the generator arguments in tupled-up form (because there can only be one argument, from my understanding). Hence, the type error in the example in #88653 is correct, because the given generator takes a `bool` argument, whereas the function's return type talks about a generator with a `(bool,)` argument.
The error message is both confusing and wrong, though: It is wrong because it displays the wrong "expected signature", and it is confusing because both the "expected" and "found" notes point at the same span. With my changes, I get the following, more helpful output:
```
error[E0631]: type mismatch in generator arguments
--> test.rs:5:22
|
5 | fn foo(bar: bool) -> impl Generator<(bool,)> {
| ^^^^^^^^^^^^^^^^^^^^^^^ expected signature of `fn((bool,)) -> _`
6 | |bar| {
| ----- found signature of `fn(bool) -> _`
```
Couple of changes to FileSearch and SearchPath
* Turn a couple of regular comments into doc comments
* Move `get_tools_search_paths` from `FileSearch` to `Session`
* Use Lrc instead of Option to avoid duplication of a `SearchPath`
Don't lint about missing code examples in derived traits
When the `missing_doc_code_examples` lint is performed it also requires that derived Trait implementations have a code example for each member etc., which causes undesirable behavior.
# Examples
With `missing_doc_code_examples` enable we are not able to use the `Clone` derive macro due to the generated code not being documented:
```rust
#[deny(rustdoc::missing_doc_code_examples)]
/// docs
/// ```
/// let s = SomeStruct;
/// ```
#[derive(Clone)]
pub struct SomeStruct;
```
yields:
```
Documenting testt v0.1.0 (<redacted>)
error: missing code example in this documentation
--> src/lib.rs:7:10
|
7 | #[derive(Clone)]
| ^^^^^
|
note: the lint level is defined here
--> src/lib.rs:1:8
|
1 | #[deny(rustdoc::missing_doc_code_examples)]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
error: missing code example in this documentation
--> src/lib.rs:7:10
|
7 | #[derive(Clone)]
| ^^^^^
error: could not document `testt`
Caused by:
process didn't exit successfully: `rustdoc ...
```
closes#81775
Add TcpListener::into_incoming and IntoIncoming
The `incoming` method is really useful, however for some use cases the borrow
this introduces is needlessly restricting. Thus, an owned variant is added.
r? ``@joshtriplett``
Fix ICE in `improper_ctypes_definitions` lint with all-ZST transparent types
Fixes#87496. There is also another function in the same file that looks fishy, but I haven't been able to produce an ICE there, and in any case, it's not related to #87496:
fd853c00e2/compiler/rustc_lint/src/types.rs (L720-L734)
r? ```@JohnTitor```
Make diagnostics clearer for `?` operators
Re-submission of #75029, fixes#71309
This also revives the `content` methods removed by #83185.
r? `@estebank`
Introduce a fast path that avoids the `debug_tuple` abstraction when deriving Debug for unit-like enum variants.
The intent here is to allow LLVM to remove the switch entirely in favor of an
indexed load from a table of constant strings, which is likely what the
programmer would write in C. Unfortunately, LLVM currently doesn't perform this
optimization due to a bug, but there is [a
patch](https://reviews.llvm.org/D109565) that fixes this issue. I've verified
that, with that patch applied on top of this commit, Debug for unit-like tuple
variants becomes a load, reducing the O(n) code bloat to O(1).
Note that inlining `DebugTuple::finish()` wasn't enough to allow LLVM to
optimize the code properly; I had to avoid the abstraction entirely. Not using
the abstraction is likely better for compile time anyway.
Part of #88793.
r? `@oli-obk`
Most of the `run-make-fulldeps` tests use a make-driven rustc command
that includes `HOST_RPATH_DIR` in the library path, but this particular
test runs from python instead. When the toolchain is built without
`rpath` enabled, we need that library path in the environment so it can
find its own libraries.
Point at argument instead of call for their obligations
When an obligation is introduced by a specific `fn` argument, point at
the argument instead of the `fn` call if the obligation fails to be
fulfilled.
Move the information about pointing at the call argument expression in
an unmet obligation span from the `FulfillmentError` to a new
`ObligationCauseCode`.
When giving an error about an obligation introduced by a function call
that an argument doesn't fulfill, and that argument is a block, add a
span_label pointing at the innermost tail expression.
Current output:
```
error[E0425]: cannot find value `x` in this scope
--> f10.rs:4:14
|
4 | Some(x * 2)
| ^ not found in this scope
error[E0277]: expected a `FnOnce<({integer},)>` closure, found `Option<_>`
--> f10.rs:2:31
|
2 | let p = Some(45).and_then({
| ______________________--------_^
| | |
| | required by a bound introduced by this call
3 | | |x| println!("doubling {}", x);
4 | | Some(x * 2)
| | -----------
5 | | });
| |_____^ expected an `FnOnce<({integer},)>` closure, found `Option<_>`
|
= help: the trait `FnOnce<({integer},)>` is not implemented for `Option<_>`
```
Previous output:
```
error[E0425]: cannot find value `x` in this scope
--> f10.rs:4:14
|
4 | Some(x * 2)
| ^ not found in this scope
error[E0277]: expected a `FnOnce<({integer},)>` closure, found `Option<_>`
--> f10.rs:2:22
|
2 | let p = Some(45).and_then({
| ^^^^^^^^ expected an `FnOnce<({integer},)>` closure, found `Option<_>`
|
= help: the trait `FnOnce<({integer},)>` is not implemented for `Option<_>`
```
Partially address #27300. Will require rebasing on top of #88546.
Rollup of 10 pull requests
Successful merges:
- #88292 (Enable --generate-link-to-definition for rustc's docs)
- #88729 (Recover from `Foo(a: 1, b: 2)`)
- #88875 (cleanup(rustc_trait_selection): remove vestigial code from rustc_on_unimplemented)
- #88892 (Move object safety suggestions to the end of the error)
- #88928 (Document the closure arguments for `reduce`.)
- #88976 (Clean up and add doc comments for CStr)
- #88983 (Allow calling `get_body_with_borrowck_facts` without `-Z polonius`)
- #88985 (Update clobber_abi list to include k[1-7] regs)
- #88986 (Update the backtrace crate)
- #89009 (Fix typo in `break` docs)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
