I saw reference to globs in #7755, but it doesn't look like they're
actually supported, and I had to dig through the source to discover
that the folders are relative to the workspace root. Further digging
was required to get VS Code from hanging for long periods trying to
watch giant Bazel folders that had already been excluded from Rust
Analyzer. Hopefully this tweak will save others the confusion :-)
Note that, while we don't currently have a fuzzy-matching score, it
makes sense to special-case postfix templates -- it's very annoying when
`.not()` gets sorted before `.not`. We might want to move this infra to
fuzzy matching, once we have that!
Before this PR, SourceChange used a bool and CompletionItem used an enum
to signify if edit is a snippet. It makes sense to use the same pattern
in both cases. `bool` feels simpler, as there's only one consumer of
this API, and all producers are encapsulated anyway (we check the
capability at the production site).
One source completion can produce up to two lsp completions.
Additionally, `preselct` and `sort_text` are global properties of the
whole set of completions, so the right granularity here is to convert
many completions.
As a side-benefit, we no loger allocate intermediate vec.
Moving tests to `rust-analyzer` crate allows removing walkdir dependency
from `xtask`. It does seem more reasonable to keep tidy tests outside of
the "build system" and closer to other integration tests.
* Keep codegen adjacent to the relevant crates.
* Remove codgen deps from xtask, speeding-up from-source installation.
This regresses the release process a bit, as it now needs to run the
tests (and, by extension, compile the code).
9269: Recreate status page r=lnicola a=Milo123459
I'm working on redesigning the status page.
Co-authored-by: Milo <50248166+Milo123459@users.noreply.github.com>
9380: feat: Implement goto_declaration support r=matklad a=Veykril
This is just a simple implementation that falls back to `goto_definition` for everything but modules where it goes to the actual module declaration if possible.
Co-authored-by: Lukas Wirth <lukastw97@gmail.com>
9348: output to log file if RA_LOG_FILE is defined in environment r=rezural a=rezural
This adds a check for RA_LOG_FILE, and logs to that if defined. It currently overrides flags.log_file. If this is undesirable, I will add a check.
Co-authored-by: rezural <rezural@protonmail.com>
9264: feat: Make documentation on hover configurable r=Veykril a=Veykril
This also implements deprecation support for config options as this renames `hoverActions_linksInHover` to `hover_linksInHover`.
Fixes#9232
Co-authored-by: Lukas Wirth <lukastw97@gmail.com>
9258: minor: Give `ImportPrefix` variants better config names r=matklad a=Veykril
I feel like `crate` and `self` work better than `by_crate` and `by_self`. The only reason for the current names were that `Self` doesn't work for the variant name on the rust side so I forgot about setting proper config names on serde layer.
Co-authored-by: Lukas Wirth <lukastw97@gmail.com>
9260: tree-wide: make rustdoc links spiky so they are clickable r=matklad a=lf-
Rustdoc was complaining about these while I was running with --document-private-items and I figure they should be fixed.
Co-authored-by: Jade <software@lfcode.ca>
8866: Update salsa r=matklad a=jonas-schievink
This updates salsa to include https://github.com/salsa-rs/salsa/pull/265, and removes all cancellation-related code from rust-analyzer
Co-authored-by: Jonas Schievink <jonasschievink@gmail.com>
The current logic used to transfer global_excludes into vfs exclusions
only transfers global_excludes that are the parent of an item in
dirs.include.
This commit additionally adds an item from global_exclude to the vfs
exclusions if the global_exclude is a child of an included item.
8767: implement range formatting r=matklad a=euclio
Fixes#7580.
This PR implements the `textDocument/rangeFormatting` request using `rustfmt`'s `--file-lines` option.
Still needs some tests. What I want to know is how I should handle the instability of the `--file-lines` option. It's still unstable in rustfmt, so it's only available on nightly, and needs a special flag to enable. Is there a way for `rust-analyzer` to detect if it's using nightly rustfmt, or for users to opt-in?
Co-authored-by: Andy Russell <arussell123@gmail.com>
8942: Add `library` semantic token modifier to items from other crates r=arzg a=arzg
Closes#5772.
A lot of code here is pretty repetitive; please let me know if you have any ideas how to improve it, or whether it’s fine as-is.
Side-note: How can I add tests for this? I don’t see a way for the test Rust code in `test_highlighting` to reference other crates to observe the new behaviour.
Co-authored-by: Aramis Razzaghipour <aramisnoah@gmail.com>
8873: Implement import-granularity guessing r=matklad a=Veykril
This renames our `MergeBehavior` to `ImportGranularity` as rustfmt has it as the purpose of them are basically the same. `ImportGranularity::Preserve` currently has no specific purpose for us as we don't have an organize imports assist yet, so it currently acts the same as `ImportGranularity::Item`.
We now try to guess the import style on a per file basis and fall back to the user granularity setting if the file has no specific style yet or where it is ambiguous. This can be turned off by setting `import.enforceGranularity` to `true`.
Closes https://github.com/rust-analyzer/rust-analyzer/issues/8870
Co-authored-by: Lukas Tobias Wirth <lukastw97@gmail.com>
The new extension allows filtering of workspace symbool lookup
results by search scope or search kind.
Filtering can be configured in 3 different ways:
- The '#' or '*' markers can be added inline with the symbol lookup
query.
The '#' marker means symbols should be looked up in the current
workspace and any dependencies. If not specified, only current
workspace is considered.
The '*' marker means all kinds of symbols should be looked up
(types, functions, etc). If not specified, only type symbols are
returned.
- Each LSP request can take an optional search_scope or search_kind
argument query parameter.
- Finally there are 2 global config options that can be set for all
requests served by the active RA instance.
Add support for setting the global config options to the VSCode
extension.
The extension does not use the per-request way, but it's useful for
other IDEs.
The latest version of VSCode filters out the inline markers, so
currently the only reasonable way to use the new functionality is
via the global config.
8795: Allow semantic tokens for strings to be disabled r=matklad a=djrenren
Fixes https://github.com/rust-analyzer/rust-analyzer/issues/7111
Pretty straightforward change, but open to any suggestions if there's a more recommended testing strategy than what I went with.
Co-authored-by: John Renner <john@jrenner.net>
8674: fix for #8664: Emit folding ranges for multi-line where clauses r=matklad a=m5tfi
#8664
I added a test that assert folding multi-line where clauses while leaving single lined one. Please, let me know if the code needs further improvements.
Co-authored-by: m5tfi <72708423+m5tfi@users.noreply.github.com>
According to the spec we should return ServerNotInitialized if the server is waiting for an initialize request and something else comes in.
Upgrading to lsp-server 0.5.1 will do this and retry until the initialize request comes in.
Fixes#8581
8540: Prevent being able to rename items that are not part of the workspace r=Veykril a=Veykril
This change causes renames that happen on items coming from crates outside the workspace to fail. I believe this should be the right approach, but usage of cargo's workspace might not be entirely correct for preventing these kinds of refactoring from touching things they shouldn't. I'm not entirely sure?
cc #6623, this is one of the bigger footguns when it comes to refactoring, especially in combination with import aliases people tend to rename items coming from a crates dependency which this prevents.
Co-authored-by: Lukas Wirth <lukastw97@gmail.com>
8354: Distinguishing between different operators in semantic highlighting r=matklad a=chetankhilosiya
Co-authored-by: Chetan Khilosiya <chetan.khilosiya@gmail.com>
Conceptually, using a *message* here is wrong, because this is a
"status", rather than "point in time" thing. But statuses are an LSP
extension, while messages are stable. As a compromise, send message only
for more critical `metadata` failures, and only once per state change.
8410: Use CompletionTextEdit::InsertAndReplace if supported by the client r=Veykril a=Veykril
Fixes#8404, Fixes#3130
Co-authored-by: Lukas Wirth <lukastw97@gmail.com>
8375: feat: show errors from `cargo metadata` and initial `cargo check` in the status bar r=matklad a=matklad
bors r+
🤖
Co-authored-by: Aleksey Kladov <aleksey.kladov@gmail.com>
We have a CLI for benchmarking, but no one actually uses it it seems.
Let's try switching to "internal" benchmarks, implemented as rust tests.
They should be easier to "script" to automate tracking of perf
regressions.
8132: Add `'` to trigger_characters, allowing more direct lifetime completions r=Veykril a=Veykril
Fixes having to type a character after `'` to complete lifetimes and labels
Co-authored-by: Lukas Wirth <lukastw97@gmail.com>
8021: Enable searching for builtin types r=matklad a=Veykril
Not too sure how useful this is for reference search overall, but for completeness sake it should be there
Also enables document highlighting for them.
8022: some clippy::performance fixes r=matklad a=matthiaskrgr
use vec![] instead of Vec::new() + push()
avoid redundant clones
use chars instead of &str for single char patterns in ends_with() and starts_with()
allocate some Vecs with capacity to avoid unnecessary resizing
Co-authored-by: Lukas Wirth <lukastw97@gmail.com>
Co-authored-by: Matthias Krüger <matthias.krueger@famsik.de>
use vec![] instead of Vec::new() + push()
avoid redundant clones
use chars instead of &str for single char patterns in ends_with() and starts_with()
allocate some Vecs with capacity to avoid unneccessary resizing
7873: Consider unresolved qualifiers during flyimport r=matklad a=SomeoneToIgnore
Closes https://github.com/rust-analyzer/rust-analyzer/issues/7679
Takes unresolved qualifiers into account, providing better completions (or none, if the path is resolved or do not match).
Does not handle cases when both path qualifier and some trait has to be imported: there are many extra issues with those (such as overlapping imports, for instance) that will require large diffs to address.
Also does not do a fuzzy search on qualifier, that requires some adjustments in `import_map` for better queries and changes to the default replace range which also seems relatively big to include here.
7933: Improve compilation speed r=matklad a=matklad
bors r+
🤖
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
Co-authored-by: Aleksey Kladov <aleksey.kladov@gmail.com>
7891: Improve handling of rustc_private r=matklad a=DJMcNab
This PR changes how `rust-analyzer` handles `rustc_private`. In particular, packages now must opt-in to using `rustc_private` in `Cargo.toml`, by adding:
```toml
[package.metadata.rust-analyzer]
rustc_private=true
```
This means that depending on crates which also use `rustc_private` will be significantly improved, since their dependencies on the `rustc_private` crates will be resolved properly.
A similar approach could be used in #6714 to allow annotating that your package uses the `test` crate, although I have not yet handled that in this PR.
Additionally, we now only index the crates which are transitive dependencies of `rustc_driver` in the `rustcSource` directory. This should not cause any change in behaviour when using `rustcSource: "discover"`, as the source used then will only be a partial clone. However, if `rustcSource` pointing at a local checkout of rustc, this should significantly improve the memory usage and lower indexing time. This is because we avoids indexing all crates in `src/tools/`, which includes `rust-analyzer` itself.
Furthermore, we also prefer named dependencies over dependencies from `rustcSource`. This ensures that feature resolution for crates which are depended on by both `rustc` and your crate uses the correct set for analysing your crate.
See also [introductory zulip stream](https://rust-lang.zulipchat.com/#narrow/stream/185405-t-compiler.2Fwg-rls-2.2E0/topic/Fixed.20crate.20graphs.20and.20optional.20builtin.20crates/near/229086673)
I have tested this in [priroda](https://github.com/oli-obk/priroda/), and it provides a significant improvement to the development experience (once I give `miri` the required data in `Cargo.toml`)
Todo:
- [ ] Documentation
This is ready to review, and I will add documentation if this would be accepted (or if I get time to do so anyway)
Co-authored-by: Daniel McNab <36049421+DJMcNab@users.noreply.github.com>
7335: added region folding r=matklad a=LucianoBestia
Regions of code that you'd like to be folded can be wrapped with `// #region` and `// #endregion` line comments.
This is called "Region Folding". It is originally available for many languages in VSCode. But Rust-analyzer has its own folding function and this is missing.
With this Pull Request I am suggesting a simple solution.
The regions are a special kind of comments, so I added a bit of code in the comment folding function.
The regex to match are: `^\s*//\s*#?region\b` and `^\s*//\s*#?endregion\b`.
The number of space characters is not important. There is an optional # character. The line can end with a name of the region.
Example:
```rust
// 1. some normal comment
// region: test
// 2. some normal comment
calling_function(x,y);
// endregion: test
```
I added a test for this new functionality in `folding_ranges.rs`.
Please, take a look and comment.
I found that these exact regexes are already present in the file `language-configuration.json`, but I don't find a way to read this configuration. So my regex is hardcoded in the code.
7691: Suggest name in extract variable r=matklad a=cpud36
Generate better default name in extract variable assist as was mentioned in issue #1587
# Currently supported
(in order of declining precedence)
1. Expr is argument to a function; use corresponding parameter name
2. Expr is result of a function or method call; use this function/method's name
3. Use expr type name (if possible)
4. Fallback to `var_name` otherwise
# Showcase
# Questions
* Should we more aggressively strip known types? E.g. we already strip `&T -> T`; should we strip `Option<T> -> T`, `Result<T, E> -> T`, and others?
* Integers and floats use `var_name` by default. Should we introduce a name, like `i`, `f` etc?
* Can we return a list and suggest a name when renaming(like IntelliJ does)?
* Should we add counters to remove duplicate variables? E.g. `type`, `type1`, type2`, etc.
Co-authored-by: Luciano Bestia <LucianoBestia@gmail.com>
Co-authored-by: Luciano <31509965+LucianoBestia@users.noreply.github.com>
Co-authored-by: Vladyslav Katasonov <cpud47@gmail.com>
Reading through the code for diagnostics and observing debug logs, I noticed
that diagnostics are transmitted after every change for every opened file,
even if they haven't changed (especially visible for files with no diagnostics).
This change avoids marking files as "changed" if diagnostics are the same to what
was already sent before. This will only work if diagnostics are always produced in
the same order, but from my limited testing it seems this is the case.
7690: Extract `fn load_workspace(…)` from `fn load_cargo(…)` r=matklad a=regexident
Unfortunately in https://github.com/rust-analyzer/rust-analyzer/pull/7595 I forgot to `pub use` (rather than just `use`) the newly introduced `LoadCargoConfig`.
So this PR fixes this now.
It also:
- splits up `fn load_cargo` into a "workspace loading" and a "project loading" phase
- adds a `progress: &dyn Fn(String)` to allow third-parties to provide CLI progress updates, too
The motivation behind both of these is the fact that rust-analyzer currently does not support caching.
As such any third-party making use of `ra_ap_…` needs to providing a caching layer itself.
Unlike for rust-analyzer itself however a common use-pattern of third-parties is to analyze a specific target (`--lib`/`--bin <BIN>`/…) from a specific package (`--package`). The targets/packages of a crate can be obtained via `ProjectWorkspace::load(…)`, which currently is performed inside of `fn load_cargo`, effectively making the returned `ProjectWorkspace` inaccessible to the outer caller. With this information one can then provide early error handling via CLI (in case of ambiguities or invalid arguments, etc), instead of `fn load_cargo` failing with a possibly obscure error message. It also allows for annotating the persisted caches with its specific associated package/target selector and short-circuit quickly if a matching cache is found on disk, significantly cutting load times.
Before:
```rust
pub struct LoadCargoConfig {
pub cargo_config: &CargoConfig,
pub load_out_dirs_from_check: bool,
pub with_proc_macro: bool,
}
pub fn load_cargo(
root: &Path,
config: &LoadCargoConfig
) -> Result<(AnalysisHost, vfs::Vfs)> {
// ...
}
```
After:
```rust
pub fn load_workspace(
root: &Path,
config: &CargoConfig,
progress: &dyn Fn(String),
) -> Result<ProjectWorkspace> {
// ...
}
pub struct LoadCargoConfig {
pub load_out_dirs_from_check: bool,
pub with_proc_macro: bool,
}
pub fn load_cargo(
ws: ProjectWorkspace,
config: &LoadCargoConfig,
progress: &dyn Fn(String),
) -> Result<(AnalysisHost, vfs::Vfs)> {
// ...
}
```
Co-authored-by: Vincent Esche <regexident@gmail.com>
7657: utf8 r=matklad a=matklad
- Prepare for utf-8 offsets
- reduce code duplication in tests
- Make utf8 default, implement utf16 in terms of it
- Make it easy to add additional context for offset conversion
- Implement utf8 offsets
closes#7453
Co-authored-by: Aleksey Kladov <aleksey.kladov@gmail.com>
7661: Start LSP 3.17 support r=kjeremy a=kjeremy
Companion to https://github.com/gluon-lang/lsp-types/pull/199 which <strike>has not been merged yet</strike> has been merged.
This doesn't opt into any 3.17 functionality yet.
Co-authored-by: Jeremy Kolb <kjeremy@gmail.com>
7643: Automatically detect the rustc-src directory (fixes#3517) r=matklad a=bnjbvr
If the configured rustcSource was not set, then try to automatically
detect a source for the sysroot rustc directory.
I wasn't sure how to do it in the case of the project.json file, though.
7663: Tolerate spaces in nix binary patching r=matklad a=CertainLach
If path to original file contains space (I.e on code insiders, where
default data directory is ~/Code - Insiders/), then there is syntax
error evaluating src arg.
Instead pass path as str, and coerce to path back in nix expression
Co-authored-by: Benjamin Bouvier <public@benj.me>
Co-authored-by: Yaroslav Bolyukin <iam@lach.pw>
In some situations we reloaded the workspace in the tests after having reported
to be ready. There's two fixes here:
1. Add a version to the VFS config and include that version in progress reports,
so that we don't think we're done prematurely;
2. Delay status transitions until after changes are applied. Otherwise the last
change during loading can potentially trigger a workspace reload, if it contains
interesting changes.
I've noticed that there are various suggestions that rust-analyzer seems
to filter out, even if they make sense.
Here's an example of where it seems like there should be a suggestion,
but there isn't:
It turns out that this specific suggestion is not considered
`MachineApplicable`, which are the only suggestions that rust-analyzer
accepts. However if you read the documentation for `MachineApplicable`,
b3897e3d13/compiler/rustc_lint_defs/src/lib.rs (L27-L29)
then you realize that these are specifically only those suggestions that
rust-analyzer could even automatically apply (in some distant future,
behind some setting or so). Other suggestions that may have some
semantic impact do not use `MachineApplicable`. So all other suggestions
are still intended to be suggested to the user, just not automatically
applied without the user being consulted.
b3897e3d13/compiler/rustc_lint_defs/src/lib.rs (L22-L24)
So with that in mind, rust-analyzer should almost definitely not filter
out `MaybeIncorrect` (which honestly is named horribly, it just means
that it's a semantic change, not just a syntactical one).
Then there's `HasPlaceholders` which basically is just another semantic
one, but with placeholders. The user will have to make some adjustments,
but the suggestion still is perfectly valid. rust-analyzer could
probably detect those placeholders and put proper "tab through" markers
there for the IDE, but that's not necessary for now.
Then the last one is `Unspecified` which is so unknown that I don't even
know how to judge it, meaning that the suggestion should probably also
just be suggested to the user and then they can decide.
So with all that in mind, I'm proposing to get rid of the check for
Applicability entirely.
7457: Add no-buffering file logging and wait for a debugger option. r=vsrs a=vsrs
Adds two command line flags: `--no-buffering` and `--wait-dbg`.
Not sure if someone else needs this, but personally I found both flags extremely useful trying to figure out why RA does not work with Visual Studio. Or better to say why Visual Studio does not work with RA.
Co-authored-by: vsrs <vit@conrlab.com>
7353: Add LifetimeParam and ConstParam to CompletionItemKind r=matklad a=Veykril
Adds `LifetimeParam` and `ConstParam` to `CompletionItemKind` and maps them both to `TypeParam` in the protocol conversion as there are no equivalents, so nothing really changes there.
`ConstParam` could be mapped to `Const` I guess but I'm split on whether that would be better?
Additions were solely inspired by (the single) test output for const params.
Also sorts the variants of `CompletionItemKind` and its to_proto match.
Co-authored-by: Lukas Wirth <lukastw97@gmail.com>
I've noticed a bunch of "main loop too long" warnings in console when
typing in Cargo.toml. Profiling showed that the culprit is `rustc
--print cfg` call.
I moved it to the background project loading phase, where it belongs.
This highlighted a problem: we generally use single `cfg`, while it
really should be per crate.
