I don't believe these test cases have served any purpose in years.
The shootout benchmarks are now upstreamed. A new benchmark suite
should rather be maintained out of tree.
This test has been deadlocking and causing problems on the bots basically since
its inception. Some memory safety issues were fixed in 987dc84b, but the
deadlocks remained afterwards unfortunately.
After some investigation, I've concluded that this is just a situation where OSX
is not guaranteed to run destructors. The fix in 987dc84b observed that OSX was
rewriting the backing TLS memory to its initial state during destruction while
we weren't looking, and this would have the effect of canceling the destructors
of any other initialized TLS slots.
While very difficult to pin down, this is basically what I assume is happening
here, so there doesn't seem to really be anythig we can do to ensure the test
robustly passes on OSX, so just ignore it for now.
When cross compiling for a target that has a larger usize type than the
host system, we use a truncated value to mark data as dropped,
eventually leading to drop calls on already dropped data. To properly
handle this, the drop pattern needs to be of type u64.
Since C_integral truncates its given value to the requested size anyway,
we can also drop the function that chose between the u32 and u64 values,
and always use the u64 constant.
Fixes#31139
r? @pnkfelix
The cross prefix was not likely the actual compiler that needed to be used, but
rather the standard `arm-linux-gnueabihf-gcc` compiler can just be used with
`-march=armv7`.
Looks like the rumprun build has bitrotted over time, so this includes some libc
fixes and some various libstd fixes which gets it back to bootstrapping.
Block comments don't have to be in the format `/*! ... !*/`
in order to be read as doc comments about the parent block.
The format `/*! ... */` is enough.
Unfortunately older clang compilers don't support this argument, so the
bootstrap will fail. We don't actually really need to optimized the C code we
compile, however, as currently we're just compiling jemalloc and not much else.
This fixes an ICE introduced by #31065 that occurs when a path cannot be resolved because of a certain class of unresolved import (`Indeterminate` imports).
For example, this currently causes an ICE:
```rust
mod foo { pub use self::*; }
fn main() { foo::f() }
```
r? @nrc
When cross compiling for a target that has a larger usize type than the
host system, we use a truncated value to mark data as dropped,
eventually leading to drop calls on already dropped data. To properly
handle this, the drop pattern needs to be of type u64.
Since C_integral truncates its given value to the requested size anyway,
we can also drop the function that chose between the u32 and u64 values,
and always use the u64 constant.
Fixes#31139
We no longer require `use` and `extern crate` items to precede other items in modules thanks to [RFC #385](https://github.com/rust-lang/rfcs/pull/385), but we still require `use` and `extern crate` items to precede statements in blocks (other items can appear anywhere in a block).
I think that this is a needless distinction between imports and other items that contradicts the intent of the RFC.
If the tests were run with `RUST_BACKTRACE=1 make check` this test failed. If they were run without it it succeeded.
We need to use `env_remove` instead of `env_clear` because the latter will never work on windows
This adds the basic structure for the internals documentation, and also the initial version of the "Overview".
This first section gives and overview of the compilation process. It mentions the individual phases, and gives mention to their function & links to the relevant crates in the source tree.
This is a very general overview which is meant to lead in to the next section which will cover the `driver`. That section will give more in-depth information on each of the phases & cover things like sessions and the driver API. I wanted to give a more general introduction before getting into that detail.
This adds support for the armv7 crosstool-ng toolchain for the Raspberry Pi 2.
Getting the toolchain ready:
Checkout crosstool-ng from https://github.com/crosstool-ng/crosstool-ng
Build crosstool-ng
Configure the rpi2 target with |ct-ng armv7-rpi2-linux-gnueabihf|
Build the toolchain with |ct-build| and add the path to $toolchain_install_dir/bin to your $PATH
Then, on the rust side:
configure --target=armv7-rpi2-linux-gnueabihf && make && make install
To cross compile for the rpi2,
add $rust_install_path/lib to your $LD_LIBRARY_PATH, then use
rustc --target=armv7-rpi2-linux-gnueabihf -C linker=armv7-rpi2-linux-gnueabihf-g++ hello.rs
The purpose of the translation item collector is to find all monomorphic instances of functions, methods and statics that need to be translated into LLVM IR in order to compile the current crate.
So far these instances have been discovered lazily during the trans path. For incremental compilation we want to know the set of these instances in advance, and that is what the trans::collect module provides.
In the future, incremental and regular translation will be driven by the collector implemented here.
r? @nikomatsakis
cc @rust-lang/compiler
Translation Item Collection
===========================
This module is responsible for discovering all items that will contribute to
to code generation of the crate. The important part here is that it not only
needs to find syntax-level items (functions, structs, etc) but also all
their monomorphized instantiations. Every non-generic, non-const function
maps to one LLVM artifact. Every generic function can produce
from zero to N artifacts, depending on the sets of type arguments it
is instantiated with.
This also applies to generic items from other crates: A generic definition
in crate X might produce monomorphizations that are compiled into crate Y.
We also have to collect these here.
The following kinds of "translation items" are handled here:
- Functions
- Methods
- Closures
- Statics
- Drop glue
The following things also result in LLVM artifacts, but are not collected
here, since we instantiate them locally on demand when needed in a given
codegen unit:
- Constants
- Vtables
- Object Shims
General Algorithm
-----------------
Let's define some terms first:
- A "translation item" is something that results in a function or global in
the LLVM IR of a codegen unit. Translation items do not stand on their
own, they can reference other translation items. For example, if function
`foo()` calls function `bar()` then the translation item for `foo()`
references the translation item for function `bar()`. In general, the
definition for translation item A referencing a translation item B is that
the LLVM artifact produced for A references the LLVM artifact produced
for B.
- Translation items and the references between them for a directed graph,
where the translation items are the nodes and references form the edges.
Let's call this graph the "translation item graph".
- The translation item graph for a program contains all translation items
that are needed in order to produce the complete LLVM IR of the program.
The purpose of the algorithm implemented in this module is to build the
translation item graph for the current crate. It runs in two phases:
1. Discover the roots of the graph by traversing the HIR of the crate.
2. Starting from the roots, find neighboring nodes by inspecting the MIR
representation of the item corresponding to a given node, until no more
new nodes are found.
The roots of the translation item graph correspond to the non-generic
syntactic items in the source code. We find them by walking the HIR of the
crate, and whenever we hit upon a function, method, or static item, we
create a translation item consisting of the items DefId and, since we only
consider non-generic items, an empty type-substitution set.
Given a translation item node, we can discover neighbors by inspecting its
MIR. We walk the MIR and any time we hit upon something that signifies a
reference to another translation item, we have found a neighbor. Since the
translation item we are currently at is always monomorphic, we also know the
concrete type arguments of its neighbors, and so all neighbors again will be
monomorphic. The specific forms a reference to a neighboring node can take
in MIR are quite diverse. Here is an overview:
The most obvious form of one translation item referencing another is a
function or method call (represented by a CALL terminator in MIR). But
calls are not the only thing that might introduce a reference between two
function translation items, and as we will see below, they are just a
specialized of the form described next, and consequently will don't get any
special treatment in the algorithm.
A function does not need to actually be called in order to be a neighbor of
another function. It suffices to just take a reference in order to introduce
an edge. Consider the following example:
```rust
fn print_val<T: Display>(x: T) {
println!("{}", x);
}
fn call_fn(f: &Fn(i32), x: i32) {
f(x);
}
fn main() {
let print_i32 = print_val::<i32>;
call_fn(&print_i32, 0);
}
```
The MIR of none of these functions will contain an explicit call to
`print_val::<i32>`. Nonetheless, in order to translate this program, we need
an instance of this function. Thus, whenever we encounter a function or
method in operand position, we treat it as a neighbor of the current
translation item. Calls are just a special case of that.
In a way, closures are a simple case. Since every closure object needs to be
constructed somewhere, we can reliably discover them by observing
`RValue::Aggregate` expressions with `AggregateKind::Closure`. This is also
true for closures inlined from other crates.
Drop glue translation items are introduced by MIR drop-statements. The
generated translation item will again have drop-glue item neighbors if the
type to be dropped contains nested values that also need to be dropped. It
might also have a function item neighbor for the explicit `Drop::drop`
implementation of its type.
A subtle way of introducing neighbor edges is by casting to a trait object.
Since the resulting fat-pointer contains a reference to a vtable, we need to
instantiate all object-save methods of the trait, as we need to store
pointers to these functions even if they never get called anywhere. This can
be seen as a special case of taking a function reference.
Since `Box` expression have special compiler support, no explicit calls to
`exchange_malloc()` and `exchange_free()` may show up in MIR, even if the
compiler will generate them. We have to observe `Rvalue::Box` expressions
and Box-typed drop-statements for that purpose.
Interaction with Cross-Crate Inlining
-------------------------------------
The binary of a crate will not only contain machine code for the items
defined in the source code of that crate. It will also contain monomorphic
instantiations of any extern generic functions and of functions marked with
The collection algorithm handles this more or less transparently. When
constructing a neighbor node for an item, the algorithm will always call
`inline::get_local_instance()` before proceeding. If no local instance can
be acquired (e.g. for a function that is just linked to) no node is created;
which is exactly what we want, since no machine code should be generated in
the current crate for such an item. On the other hand, if we can
successfully inline the function, we subsequently can just treat it like a
local item, walking it's MIR et cetera.
Eager and Lazy Collection Mode
------------------------------
Translation item collection can be performed in one of two modes:
- Lazy mode means that items will only be instantiated when actually
referenced. The goal is to produce the least amount of machine code
possible.
- Eager mode is meant to be used in conjunction with incremental compilation
where a stable set of translation items is more important than a minimal
one. Thus, eager mode will instantiate drop-glue for every drop-able type
in the crate, even of no drop call for that type exists (yet). It will
also instantiate default implementations of trait methods, something that
otherwise is only done on demand.
Open Issues
-----------
Some things are not yet fully implemented in the current version of this
module.
Since no MIR is constructed yet for initializer expressions of constants and
statics we cannot inspect these properly.
Ideally, no translation item should be generated for const fns unless there
is a call to them that cannot be evaluated at compile time. At the moment
this is not implemented however: a translation item will be produced
regardless of whether it is actually needed or not.
<!-- Reviewable:start -->
[<img src="https://reviewable.io/review_button.png" height=40 alt="Review on Reviewable"/>](https://reviewable.io/reviews/rust-lang/rust/30900)
<!-- Reviewable:end -->
Looks like the rumprun build has bitrotted over time, so this includes some libc
fixes and some various libstd fixes which gets it back to bootstrapping.
E0507 can occur when you try to move out of a member of a mutably
borrowed struct, in which case `mem::replace` can help. Mentioning that
here hopefully saves future users a trip to Google.
Rustdoc could trigger a code path that relied on the
$CFG_COMPILER_HOST_TRIPLE environment variable being
set, causing an ICE if it was not. This fixes that,
emitting an error instead of crashing.
Block comments don't have to be in the format `/*! ... !*/`
in order to be read as doc comments about the parent block.
The format `/*! ... */` is enough.
