Similar to prior support added for the mips430, avr, and x86 targets
this change implements the rough equivalent of clang's
[`__attribute__((interrupt))`][clang-attr] for riscv targets, enabling
e.g.
```rust
static mut CNT: usize = 0;
pub extern "riscv-interrupt-m" fn isr_m() {
unsafe {
CNT += 1;
}
}
```
to produce highly effective assembly like:
```asm
pub extern "riscv-interrupt-m" fn isr_m() {
420003a0: 1141 addi sp,sp,-16
unsafe {
CNT += 1;
420003a2: c62a sw a0,12(sp)
420003a4: c42e sw a1,8(sp)
420003a6: 3fc80537 lui a0,0x3fc80
420003aa: 63c52583 lw a1,1596(a0) # 3fc8063c <_ZN12esp_riscv_rt3CNT17hcec3e3a214887d53E.0>
420003ae: 0585 addi a1,a1,1
420003b0: 62b52e23 sw a1,1596(a0)
}
}
420003b4: 4532 lw a0,12(sp)
420003b6: 45a2 lw a1,8(sp)
420003b8: 0141 addi sp,sp,16
420003ba: 30200073 mret
```
(disassembly via `riscv64-unknown-elf-objdump -C -S --disassemble ./esp32c3-hal/target/riscv32imc-unknown-none-elf/release/examples/gpio_interrupt`)
This outcome is superior to hand-coded interrupt routines which, lacking
visibility into any non-assembly body of the interrupt handler, have to
be very conservative and save the [entire CPU state to the stack
frame][full-frame-save]. By instead asking LLVM to only save the
registers that it uses, we defer the decision to the tool with the best
context: it can more accurately account for the cost of spills if it
knows that every additional register used is already at the cost of an
implicit spill.
At the LLVM level, this is apparently [implemented by] marking every
register as "[callee-save]," matching the semantics of an interrupt
handler nicely (it has to leave the CPU state just as it found it after
its `{m|s}ret`).
This approach is not suitable for every interrupt handler, as it makes
no attempt to e.g. save the state in a user-accessible stack frame. For
a full discussion of those challenges and tradeoffs, please refer to
[the interrupt calling conventions RFC][rfc].
Inside rustc, this implementation differs from prior art because LLVM
does not expose the "all-saved" function flavor as a calling convention
directly, instead preferring to use an attribute that allows for
differentiating between "machine-mode" and "superivsor-mode" interrupts.
Finally, some effort has been made to guide those who may not yet be
aware of the differences between machine-mode and supervisor-mode
interrupts as to why no `riscv-interrupt` calling convention is exposed
through rustc, and similarly for why `riscv-interrupt-u` makes no
appearance (as it would complicate future LLVM upgrades).
[clang-attr]: https://clang.llvm.org/docs/AttributeReference.html#interrupt-risc-v
[full-frame-save]: 9281af2ecf/src/lib.rs (L440-L469)
[implemented by]: b7fb2a3fec/llvm/lib/Target/RISCV/RISCVRegisterInfo.cpp (L61-L67)
[callee-save]: 973f1fe7a8/llvm/lib/Target/RISCV/RISCVCallingConv.td (L30-L37)
[rfc]: https://github.com/rust-lang/rfcs/pull/3246
Add separate feature gate for async fn track caller
This patch adds a feature gate `async_fn_track_caller` that is separate from `closure_track_caller`. This is to allow enabling `async_fn_track_caller` separately.
Fixes#110009
Indexing is similar to method calls in having an arbitrary
left-hand-side and then something on the right, which is the main part
of the expression. Method calls already have a span for that right part,
but indexing does not. This means that long method chains that use
indexing have really bad spans, especially when the indexing panics and
that span in coverted into a panic location.
This does the same thing as method calls for the AST and HIR, storing an
extra span which is then put into the `fn_span` field in THIR.
This patch adds a feature gate `async_fn_track_caller` that is separate from `closure_track_caller`. This is to allow enabling `async_fn_track_caller` separately.
Fixes#110009
avoid clone path prefix when lowering to hir
Found this while trying to parallelize `lower_to_hir`.
When lowering to hir, `Nested` paths in `ast` will be split and the prefix segments will be cloned. This could be omited, since the only consequence is that the prefix segments in `Path`s in hir will have the same `HirId`s, and it seems harmless.
This simplifies the process of lowering to hir and avoids re-modification of `ResolverAstLowering`.
r? `@Aaron1011`
cc #99292
Ensure Fluent messages are in alphabetical order
Fixes#111847
This adds a tidy check to ensure Fluent messages are in alphabetical order, as well as sorting all existing messages. I think the error could be worded better, would appreciate suggestions.
<details>
<summary>Script used to sort files</summary>
```py
import sys
import re
fn = sys.argv[1]
with open(fn, 'r') as f:
data = f.read().split("\n")
chunks = []
cur = ""
for line in data:
if re.match(r"^([a-zA-Z0-9_]+)\s*=\s*", line):
chunks.append(cur)
cur = ""
cur += line + "\n"
chunks.append(cur)
chunks.sort()
with open(fn, 'w') as f:
f.write(''.join(chunks).strip("\n\n") + "\n")
```
</details>
Various changes to name resolution of anon consts
Sorry this PR is kind of all over the place ^^'
Fixes#111012
- Rewrites anon const nameres to all go through `fn resolve_anon_const` explicitly instead of `visit_anon_const` to ensure that we do not accidentally resolve anon consts as if they are allowed to use generics when they aren't. Also means that we dont have bits of code for resolving anon consts that will get out of sync (i.e. legacy const generics and resolving path consts that were parsed as type arguments)
- Renames two of the `LifetimeRibKind`, `AnonConst -> ConcreteAnonConst` and `ConstGeneric -> ConstParamTy`
- Noticed while doing this that under `generic_const_exprs` all lifetimes currently get resolved to errors without any error being emitted which was causing a bunch of tests to pass without their bugs having been fixed, incidentally fixed that in this PR and marked those tests as `// known-bug:`. I'm fine to break those since `generic_const_exprs` is a very unstable incomplete feature and this PR _does_ make generic_const_exprs "less broken" as a whole, also I can't be assed to figure out what the underlying causes of all of them are. This PR reopens#77357#83993
- Changed `generics_of` to stop providing generics and predicates to enum variant discriminant anon consts since those are not allowed to use generic parameters
- Updated the error for non 'static lifetime in const arguments and the error for non 'static lifetime in const param tys to use `derive(Diagnostic)`
I have a vague idea why const-arg-in-const-arg.rs, in-closure.rs and simple.rs have started failing which is unfortunate since these were deliberately made to work, I think lifetime resolution being broken just means this regressed at some point and nobody noticed because the tests were not testing anything :( I'm fine breaking these too for the same reason as the tests for #77357#83993. I couldn't get `// known-bug` to work for these ICEs and just kept getting different stderr between CI and local `--bless` so I just removed them and will create an issue to track re-adding (and fixing) the bugs if this PR lands.
r? `@cjgillot` cc `@compiler-errors`
enable `rust_2018_idioms` lint group for doctests
With this change, `rust_2018_idioms` lint group will be enabled for compiler/libstd doctests.
Resolves#106086Resolves#99144
Signed-off-by: ozkanonur <work@onurozkan.dev>
Implement negative bounds for internal testing purposes
Implements partial support the `!` negative polarity on trait bounds. This is incomplete, but should allow us to at least be able to play with the feature.
Not even gonna consider them as a public-facing feature, but I'm implementing them because would've been nice to have in UI tests, for example in #110671.
Currently a `{D,Subd}iagnosticMessage` can be created from any type that
impls `Into<String>`. That includes `&str`, `String`, and `Cow<'static,
str>`, which are reasonable. It also includes `&String`, which is pretty
weird, and results in many places making unnecessary allocations for
patterns like this:
```
self.fatal(&format!(...))
```
This creates a string with `format!`, takes a reference, passes the
reference to `fatal`, which does an `into()`, which clones the
reference, doing a second allocation. Two allocations for a single
string, bleh.
This commit changes the `From` impls so that you can only create a
`{D,Subd}iagnosticMessage` from `&str`, `String`, or `Cow<'static,
str>`. This requires changing all the places that currently create one
from a `&String`. Most of these are of the `&format!(...)` form
described above; each one removes an unnecessary static `&`, plus an
allocation when executed. There are also a few places where the existing
use of `&String` was more reasonable; these now just use `clone()` at
the call site.
As well as making the code nicer and more efficient, this is a step
towards possibly using `Cow<'static, str>` in
`{D,Subd}iagnosticMessage::{Str,Eager}`. That would require changing
the `From<&'a str>` impls to `From<&'static str>`, which is doable, but
I'm not yet sure if it's worthwhile.
Tweak await span to not contain dot
Fixes a discrepancy between method calls and await expressions where the latter are desugared to have a span that *contains* the dot (i.e. `.await`) but method call identifiers don't contain the dot. This leads to weird suggestions suggestions in borrowck -- see linked issue.
Fixes#110761
This mostly touches a bunch of tests to tighten their `await` span.
More core::fmt::rt cleanup.
- Removes the `V1` suffix from the `Argument` and `Flag` types.
- Moves more of the format_args lang items into the `core::fmt::rt` module. (The only remaining lang item in `core::fmt` is `Arguments` itself, which is a public type.)
Part of https://github.com/rust-lang/rust/issues/99012
Follow-up to https://github.com/rust-lang/rust/pull/110616
