'Numeric' is the proper name of the unicode character class,
and this frees up the word 'digit' for ascii use in libcore.
Since I'm going to rename `Char::is_digit_radix` to
`is_digit`, I am not leaving a deprecated method in place,
because that would just cause name clashes, as both
`Char` and `UnicodeChar` are in the prelude.
[breaking-change]
Previously, the entire runtime API surface was publicly exposed, but
that is neither necessary nor desirable. This commit hides most of the
module, using librustrt directly as needed. The arrangement will need to
be revisited when rustrt is pulled into std.
[breaking-change]
This commit removes most of the remaining runtime infrastructure related
to the green/native split. In particular, it removes the `Runtime` trait
and instead inlines the native implementation.
Closes#17325
[breaking-change]
The trait has an obvious, sensible implementation directly on vectors so
the MemWriter wrapper is unnecessary. This will halt the trend towards
providing all of the vector methods on MemWriter along with eliminating
the noise caused by conversions between the two types. It also provides
the useful default Writer methods on Vec<u8>.
After the type is removed and code has been migrated, it would make
sense to add a new implementation of MemWriter with seeking support. The
simple use cases can be covered with vectors alone, and ones with the
need for seeks can use a new MemWriter implementation.
This breaks code that referred to variant names in the same namespace as
their enum. Reexport the variants in the old location or alter code to
refer to the new locations:
```
pub enum Foo {
A,
B
}
fn main() {
let a = A;
}
```
=>
```
pub use self::Foo::{A, B};
pub enum Foo {
A,
B
}
fn main() {
let a = A;
}
```
or
```
pub enum Foo {
A,
B
}
fn main() {
let a = Foo::A;
}
```
[breaking-change]
This commit renames a number of extension traits for slices and string
slices, now that they have been refactored for DST. In many cases,
multiple extension traits could now be consolidated. Further
consolidation will be possible with generalized where clauses.
The renamings are consistent with the [new `-Prelude`
suffix](https://github.com/rust-lang/rfcs/pull/344). There are probably
a few more candidates for being renamed this way, but that is left for
API stabilization of the relevant modules.
Because this renames traits, it is a:
[breaking-change]
However, I do not expect any code that currently uses the standard
library to actually break.
Closes#17917
As part of the collections reform RFC, this commit removes all collections
traits in favor of inherent methods on collections themselves. All methods
should continue to be available on all collections.
This is a breaking change with all of the collections traits being removed and
no longer being in the prelude. In order to update old code you should move the
trait implementations to inherent implementations directly on the type itself.
Note that some traits had default methods which will also need to be implemented
to maintain backwards compatibility.
[breaking-change]
cc #18424
https://github.com/rust-lang/rfcs/pull/221
The current terminology of "task failure" often causes problems when
writing or speaking about code. You often want to talk about the
possibility of an operation that returns a Result "failing", but cannot
because of the ambiguity with task failure. Instead, you have to speak
of "the failing case" or "when the operation does not succeed" or other
circumlocutions.
Likewise, we use a "Failure" header in rustdoc to describe when
operations may fail the task, but it would often be helpful to separate
out a section describing the "Err-producing" case.
We have been steadily moving away from task failure and toward Result as
an error-handling mechanism, so we should optimize our terminology
accordingly: Result-producing functions should be easy to describe.
To update your code, rename any call to `fail!` to `panic!` instead.
Assuming you have not created your own macro named `panic!`, this
will work on UNIX based systems:
grep -lZR 'fail!' . | xargs -0 -l sed -i -e 's/fail!/panic!/g'
You can of course also do this by hand.
[breaking-change]
The C standard library functions should be used directly. The quirky
NULL / zero-size allocation workaround is no longer necessary and was
adding an extra branch to the allocator code path in a build without
jemalloc. This is a small step towards liballoc being compatible with
handling OOM errors instead of aborting (#18292).
[breaking-change]
This unifies the `non_snake_case_functions` and `uppercase_variables` lints
into one lint, `non_snake_case`. It also now checks for non-snake-case modules.
This also extends the non-camel-case types lint to check type parameters, and
merges the `non_uppercase_pattern_statics` lint into the
`non_uppercase_statics` lint.
Because the `uppercase_variables` lint is now part of the `non_snake_case`
lint, all non-snake-case variables that start with lowercase characters (such
as `fooBar`) will now trigger the `non_snake_case` lint.
New code should be updated to use the new `non_snake_case` lint instead of the
previous `non_snake_case_functions` and `uppercase_variables` lints. All use of
the `non_uppercase_pattern_statics` should be replaced with the
`non_uppercase_statics` lint. Any code that previously contained non-snake-case
module or variable names should be updated to use snake case names or disable
the `non_snake_case` lint. Any code with non-camel-case type parameters should
be changed to use camel case or disable the `non_camel_case_types` lint.
[breaking-change]
As of RFC 18, struct layout is undefined. Opting into a C-compatible struct
layout is now down with #[repr(C)]. For consistency, specifying a packed
layout is now also down with #[repr(packed)]. Both can be specified.
To fix errors caused by this, just add #[repr(C)] to the structs, and change
#[packed] to #[repr(packed)]
Closes#14309
[breaking-change]
ImmutableVector -> ImmutableSlice
ImmutableEqVector -> ImmutableEqSlice
ImmutableOrdVector -> ImmutableOrdSlice
MutableVector -> MutableSlice
MutableVectorAllocating -> MutableSliceAllocating
MutableCloneableVector -> MutableCloneableSlice
MutableOrdVector -> MutableOrdSlice
These are all in the prelude so most code will not break.
[breaking-change]
This commit stabilizes the `std::sync::atomics` module, renaming it to
`std::sync::atomic` to match library precedent elsewhere, and tightening
up behavior around incorrect memory ordering annotations.
The vast majority of the module is now `stable`. However, the
`AtomicOption` type has been deprecated, since it is essentially unused
and is not truly a primitive atomic type. It will eventually be replaced
by a higher-level abstraction like MVars.
Due to deprecations, this is a:
[breaking-change]
This commit stabilizes the `std::sync::atomics` module, renaming it to
`std::sync::atomic` to match library precedent elsewhere, and tightening
up behavior around incorrect memory ordering annotations.
The vast majority of the module is now `stable`. However, the
`AtomicOption` type has been deprecated, since it is essentially unused
and is not truly a primitive atomic type. It will eventually be replaced
by a higher-level abstraction like MVars.
Due to deprecations, this is a:
[breaking-change]
As discovered in #15460, a particular #[link(kind = "static", ...)] line is not
actually guaranteed to link the library at all. The reason for this is that if
the external library doesn't have any referenced symbols in the object generated
by rustc, the entire library is dropped by the linker.
For dynamic native libraries, this is solved by passing -lfoo for all downstream
compilations unconditionally. For static libraries in rlibs this is solved
because the entire archive is bundled in the rlib. The only situation in which
this was a problem was when a static native library was linked to a rust dynamic
library.
This commit brings the behavior of dylibs in line with rlibs by passing the
--whole-archive flag to the linker when linking native libraries. On OSX, this
uses the -force_load flag. This flag ensures that the entire archive is
considered candidate for being linked into the final dynamic library.
This is a breaking change because if any static library is included twice in the
same compilation unit then the linker will start emitting errors about duplicate
definitions now. The fix for this would involve only statically linking to a
library once.
Closes#15460
[breaking-change]
Not included are two required patches:
* LLVM: segmented stack support for DragonFly [1]
* jemalloc: simple configure patches
[1]: http://reviews.llvm.org/D4705
- `width()` computes the displayed width of a string, ignoring the width of control characters.
- arguably we might do *something* else for control characters, but the question is, what?
- users who want to do something else can iterate over chars()
- `graphemes()` returns a `Graphemes` struct, which implements an iterator over the grapheme clusters of a &str.
- fully compliant with [UAX#29](http://www.unicode.org/reports/tr29/#Grapheme_Cluster_Boundaries)
- passes all [Unicode-supplied tests](http://www.unicode.org/reports/tr41/tr41-15.html#Tests29)
- added code to generate additionial categories in `unicode.py`
- `Cn` aka `Not_Assigned`
- categories necessary for grapheme cluster breaking
- tidied up the exports from libunicode
- all exports are exposed through a module rather than directly at crate root.
- std::prelude imports UnicodeChar and UnicodeStrSlice from std::char and std::str rather than directly from libunicode
closes#7043
- Graphemes and GraphemeIndices structs implement iterators over
grapheme clusters analogous to the Chars and CharOffsets for chars in
a string. Iterator and DoubleEndedIterator are available for both.
- tidied up the exports for libunicode. crate root exports are now moved
into more appropriate module locations:
- UnicodeStrSlice, Words, Graphemes, GraphemeIndices are in str module
- UnicodeChar exported from char instead of crate root
- canonical_combining_class is exported from str rather than crate root
Since libunicode's exports have changed, programs that previously relied
on the old export locations will need to change their `use` statements
to reflect the new ones. See above for more information on where the new
exports live.
closes#7043
[breaking-change]
