Don't fail to remove files if they are missing
In the backend we may want to remove certain temporary files, but in
certain other situations these files might not be produced in the first
place. We don't exactly care about that, and the intent is really that
these files are gone after a certain point in the backend.
Here we unify the backend file removing calls to use `ensure_removed`
which will attempt to delete a file, but will not fail if it does not
exist (anymore).
The tradeoff to this approach is, of course, that we may miss instances
were we are attempting to remove files at wrong paths due to some bug –
compilation would silently succeed but the temporary files would remain
there somewhere.
Only store a LocalDefId in some HIR nodes
Some HIR nodes are guaranteed to be HIR owners: Item, TraitItem, ImplItem, ForeignItem and MacroDef.
As a consequence, we do not need to store the `HirId`'s `local_id`, and we can directly store a `LocalDefId`.
This allows to avoid a bit of the dance with `tcx.hir().local_def_id` and `tcx.hir().local_def_id_to_hir_id` mappings.
In the backend we may want to remove certain temporary files, but in
certain other situations these files might not be produced in the first
place. We don't exactly care about that, and the intent is really that
these files are gone after a certain point in the backend.
Here we unify the backend file removing calls to use `ensure_removed`
which will attempt to delete a file, but will not fail if it does not
exist (anymore).
The tradeoff to this approach is, of course, that we may miss instances
were we are attempting to remove files at wrong paths due to some bug –
compilation would silently succeed but the temporary files would remain
there somewhere.
For better throughput during parallel processing by LLVM, we used to sort
CGUs largest to smallest. This would lead to better thread utilization
by, for example, preventing a large CGU from being processed last and
having only one LLVM thread working while the rest remained idle.
However, this strategy would lead to high memory usage, as it meant the
LLVM-IR for all of the largest CGUs would be resident in memory at once.
Instead, we can compromise by ordering CGUs such that the largest and
smallest are first, second largest and smallest are next, etc. If there
are large size variations, this can reduce memory usage significantly.
Indicate both start and end of pass RSS in time-passes output
Previously, only the end of pass RSS was indicated. This could easily
lead one to believe that the change in RSS from one pass to the next was
attributable to the second pass, when in fact it occurred between the
end of the first pass and the start of the second.
Also, improve alignment of columns.
Sample of output:
```
time: 0.739; rss: 607MB -> 637MB item_types_checking
time: 8.429; rss: 637MB -> 775MB item_bodies_checking
time: 11.063; rss: 470MB -> 775MB type_check_crate
time: 0.232; rss: 775MB -> 777MB match_checking
time: 0.139; rss: 777MB -> 779MB liveness_and_intrinsic_checking
time: 0.372; rss: 775MB -> 779MB misc_checking_2
time: 8.188; rss: 779MB -> 1019MB MIR_borrow_checking
time: 0.062; rss: 1019MB -> 1021MB MIR_effect_checking
```
codegen: assume constants cannot fail to evaluate
https://github.com/rust-lang/rust/pull/80579 landed, so we can finally remove this old hack from codegen and instead assume that consts never fail to evaluate. :)
r? `@oli-obk`
Previously, only the end of pass RSS was indicated. This could easily
lead one to believe that the change in RSS from one pass to the next was
attributable to the second pass, when in fact it occurred between the
end of the first pass and the start of the second.
Also, improve alignment of columns.
clean up some const error reporting around promoteds
These are some error reporting simplifications enabled by https://github.com/rust-lang/rust/pull/80579.
Further simplifications are possible but could be blocked on making `const_err` a hard error.
r? ``````@oli-obk``````
Use -target when linking binaries for Mac Catalyst
When running `rustc` with `-target x86_64-apple-ios-macabi`, the linker
eventually gets run with `-arch x86_64`, because the linker back end splits the
LLVM target triple and uses the first token as the target architecture. However,
this does not work for the Mac Catalyst ABI, which is a separate target from
Darwin.
Specifying the full target triple with `-target` allows Mac Catalyst binaries to
link and run.
closes#80202
rustc: Stabilize `-Zrun-dsymutil` as `-Csplit-debuginfo`
This commit adds a new stable codegen option to rustc,
`-Csplit-debuginfo`. The old `-Zrun-dsymutil` flag is deleted and now
subsumed by this stable flag. Additionally `-Zsplit-dwarf` is also
subsumed by this flag but still requires `-Zunstable-options` to
actually activate. The `-Csplit-debuginfo` flag takes one of
three values:
* `off` - This indicates that split-debuginfo from the final artifact is
not desired. This is not supported on Windows and is the default on
Unix platforms except macOS. On macOS this means that `dsymutil` is
not executed.
* `packed` - This means that debuginfo is desired in one location
separate from the main executable. This is the default on Windows
(`*.pdb`) and macOS (`*.dSYM`). On other Unix platforms this subsumes
`-Zsplit-dwarf=single` and produces a `*.dwp` file.
* `unpacked` - This means that debuginfo will be roughly equivalent to
object files, meaning that it's throughout the build directory
rather than in one location (often the fastest for local development).
This is not the default on any platform and is not supported on Windows.
Each target can indicate its own default preference for how debuginfo is
handled. Almost all platforms default to `off` except for Windows and
macOS which default to `packed` for historical reasons.
Some equivalencies for previous unstable flags with the new flags are:
* `-Zrun-dsymutil=yes` -> `-Csplit-debuginfo=packed`
* `-Zrun-dsymutil=no` -> `-Csplit-debuginfo=unpacked`
* `-Zsplit-dwarf=single` -> `-Csplit-debuginfo=packed`
* `-Zsplit-dwarf=split` -> `-Csplit-debuginfo=unpacked`
Note that `-Csplit-debuginfo` still requires `-Zunstable-options` for
non-macOS platforms since split-dwarf support was *just* implemented in
rustc.
There's some more rationale listed on #79361, but the main gist of the
motivation for this commit is that `dsymutil` can take quite a long time
to execute in debug builds and provides little benefit. This means that
incremental compile times appear that much worse on macOS because the
compiler is constantly running `dsymutil` over every single binary it
produces during `cargo build` (even build scripts!). Ideally rustc would
switch to not running `dsymutil` by default, but that's a problem left
to get tackled another day.
Closes#79361
This commit adds a new stable codegen option to rustc,
`-Csplit-debuginfo`. The old `-Zrun-dsymutil` flag is deleted and now
subsumed by this stable flag. Additionally `-Zsplit-dwarf` is also
subsumed by this flag but still requires `-Zunstable-options` to
actually activate. The `-Csplit-debuginfo` flag takes one of
three values:
* `off` - This indicates that split-debuginfo from the final artifact is
not desired. This is not supported on Windows and is the default on
Unix platforms except macOS. On macOS this means that `dsymutil` is
not executed.
* `packed` - This means that debuginfo is desired in one location
separate from the main executable. This is the default on Windows
(`*.pdb`) and macOS (`*.dSYM`). On other Unix platforms this subsumes
`-Zsplit-dwarf=single` and produces a `*.dwp` file.
* `unpacked` - This means that debuginfo will be roughly equivalent to
object files, meaning that it's throughout the build directory
rather than in one location (often the fastest for local development).
This is not the default on any platform and is not supported on Windows.
Each target can indicate its own default preference for how debuginfo is
handled. Almost all platforms default to `off` except for Windows and
macOS which default to `packed` for historical reasons.
Some equivalencies for previous unstable flags with the new flags are:
* `-Zrun-dsymutil=yes` -> `-Csplit-debuginfo=packed`
* `-Zrun-dsymutil=no` -> `-Csplit-debuginfo=unpacked`
* `-Zsplit-dwarf=single` -> `-Csplit-debuginfo=packed`
* `-Zsplit-dwarf=split` -> `-Csplit-debuginfo=unpacked`
Note that `-Csplit-debuginfo` still requires `-Zunstable-options` for
non-macOS platforms since split-dwarf support was *just* implemented in
rustc.
There's some more rationale listed on #79361, but the main gist of the
motivation for this commit is that `dsymutil` can take quite a long time
to execute in debug builds and provides little benefit. This means that
incremental compile times appear that much worse on macOS because the
compiler is constantly running `dsymutil` over every single binary it
produces during `cargo build` (even build scripts!). Ideally rustc would
switch to not running `dsymutil` by default, but that's a problem left
to get tackled another day.
Closes#79361
Refractor a few more types to `rustc_type_ir`
In the continuation of #79169, ~~blocked on that PR~~.
This PR:
- moves `IntVarValue`, `FloatVarValue`, `InferTy` (and friends) and `Variance`
- creates the `IntTy`, `UintTy` and `FloatTy` enums in `rustc_type_ir`, based on their `ast` and `chalk_ir` equilavents, and uses them for types in the rest of the compiler.
~~I will split up that commit to make this easier to review and to have a better commit history.~~
EDIT: done, I split the PR in commits of 200-ish lines each
r? `````@nikomatsakis````` cc `````@jackh726`````
rustc_codegen_ssa: use wall time for codegen_to_LLVM_IR time-passes entry
Use elapsed wall time spent on codegen_to_LLVM_IR for all CGUs as a
whole, rather than the sum for each CGU (the distinction matters for
parallel builds, where some CGUs are processed in parallel).
Use elapsed wall time spent on codegen_to_LLVM_IR for all CGUs as a
whole, rather than the sum for each CGU (the distinction matters for
parallel builds, where some CGUs are processed in parallel).
Fix sysroot option not being honored across rustc
Change link_sanitizer_runtime() to check if the sanitizer library exists in the specified/session sysroot, and if it doesn't exist, use the default sysroot. (See #79253.)
Change link_sanitizer_runtime() to check if the sanitizer library exists
in the specified/session sysroot, and if it doesn't exist, use the
default sysroot.
Optimize DST field access
For
struct X<T: ?Sized>(T)
struct Y<T: ?Sized>(u8, T)
the offset of the unsized field is
0
mem::align_of_val(&self.1)
respectively. This patch changes the expression used to compute these
offsets so that the optimizer can perform this optimization.
Consider
```rust
fn f(x: &X<dyn Any>) -> &dyn Any {
&x.0
}
```
Before:
```asm
test:
movq %rsi, %rdx
movq 16(%rsi), %rax
leaq -1(%rax), %rcx
negq %rax
andq %rcx, %rax
addq %rdi, %rax
retq
```
After:
```asm
test:
movq %rsi, %rdx
movq %rdi, %rax
retq
```
Update and improve `rustc_codegen_{llvm,ssa}` docs
Fixes#75342.
These docs were very out of date and misleading. They even said that
they codegen'd the *AST*!
For some reason, the `rustc_codegen_ssa::base` docs were exactly
identical to the `rustc_codegen_llvm::base` docs. They didn't really
make sense, because they had LLVM-specific information even though
`rustc_codegen_ssa` is supposed to be somewhat generic. So I removed
them as they were misleading.
r? ``@pnkfelix`` maybe?
These docs were very out of date and misleading. They even said that
they codegen'd the *AST*!
For some reason, the `rustc_codegen_ssa::base` docs were exactly
identical to the `rustc_codegen_llvm::base` docs. They didn't really
make sense, because they had LLVM-specific information even though
`rustc_codegen_ssa` is supposed to be somewhat generic. So I removed
them as they were misleading.
