Revise never type fallback algorithm
This is a rebase of https://github.com/rust-lang/rust/pull/84573, but dropping the stabilization of never type (and the accompanying large test diff).
Each commit builds & has tests updated alongside it, and could be reviewed in a more or less standalone fashion. But it may make more sense to review the PR as a whole, I'm not sure. It should be noted that tests being updated isn't really a good indicator of final behavior -- never_type_fallback is not enabled by default in this PR, so we can't really see the full effects of the commits here.
This combines the work by Niko, which is [documented in this gist](https://gist.github.com/nikomatsakis/7a07b265dc12f5c3b3bd0422018fa660), with some additional rules largely derived to target specific known patterns that regress with the algorithm solely derived by Niko. We build these from an intuition that:
* In general, fallback to `()` is *sound* in all cases
* But, in general, we *prefer* fallback to `!` as it accepts more code, particularly that written to intentionally use `!` (e.g., Result's with a Infallible/! variant).
When evaluating Niko's proposed algorithm, we find that there are certain cases where fallback to `!` leads to compilation failures in real-world code, and fallback to `()` fixes those errors. In order to allow for stabilization, we need to fix a good portion of these patterns.
The final rule set this PR proposes is that, by default, we fallback from `?T` to `!`, with the following exceptions:
1. `?T: Foo` and `Bar::Baz = ?T` and `(): Foo`, then fallback to `()`
2. Per [Niko's algorithm](https://gist.github.com/nikomatsakis/7a07b265dc12f5c3b3bd0422018fa660#proposal-fallback-chooses-between--and--based-on-the-coercion-graph), the "live" `?T` also fallback to `()`.
The first rule is necessary to address a fairly common pattern which boils down to something like the snippet below. Without rule 1, we do not see the closure's return type as needing a () fallback, which leads to compilation failure.
```rust
#![feature(never_type_fallback)]
trait Bar { }
impl Bar for () { }
impl Bar for u32 { }
fn foo<R: Bar>(_: impl Fn() -> R) {}
fn main() {
foo(|| panic!());
}
```
r? `@jackh726`
fix non_blanket_impls iteration order
We sometimes iterate over all `non_blanket_impls`, not sure if this is observable outside
of error messages (i.e. as incremental bugs). This should fix the underlying issue of #86986.
second attempt of #88718
r? `@nikomatsakis`
This PR allows applying a `#[track_caller]` attribute to a
closure/generator expression. The attribute as interpreted as applying
to the compiler-generated implementation of the corresponding trait
method (`FnOnce::call_once`, `FnMut::call_mut`, `Fn::call`, or
`Generator::resume`).
This feature does not have its own feature gate - however, it requires
`#![feature(stmt_expr_attributes)]` in order to actually apply
an attribute to a closure or generator.
This is implemented in the same way as for functions - an extra
location argument is appended to the end of the ABI. For closures,
this argument is *not* part of the 'tupled' argument storing the
parameters - the final closure argument for `#[track_caller]` closures
is no longer a tuple.
For direct (monomorphized) calls, the necessary support was already
implemented - we just needeed to adjust some assertions around checking
the ABI and argument count to take closures into account.
For calls through a trait object, more work was needed.
When creating a `ReifyShim`, we need to create a shim
for the trait method (e.g. `FnOnce::call_mut`) - unlike normal
functions, closures are never invoked directly, and always go through a
trait method.
Additional handling was needed for `InstanceDef::ClosureOnceShim`. In
order to pass location information throgh a direct (monomorphized) call
to `FnOnce::call_once` on an `FnMut` closure, we need to make
`ClosureOnceShim` aware of `#[tracked_caller]`. A new field
`track_caller` is added to `ClosureOnceShim` - this is used by
`InstanceDef::requires_caller` location, allowing codegen to
pass through the extra location argument.
Since `ClosureOnceShim.track_caller` is only used by codegen,
we end up generating two identical MIR shims - one for
`track_caller == true`, and one for `track_caller == false`. However,
these two shims are used by the entire crate (i.e. it's two shims total,
not two shims per unique closure), so this shouldn't a big deal.
Rollup of 12 pull requests
Successful merges:
- #88795 (Print a note if a character literal contains a variation selector)
- #89015 (core::ascii::escape_default: reduce struct size)
- #89078 (Cleanup: Remove needless reference in ParentHirIterator)
- #89086 (Stabilize `Iterator::map_while`)
- #89096 ([bootstrap] Improve the error message when `ninja` is not found to link to installation instructions)
- #89113 (dont `.ensure()` the `thir_abstract_const` query call in `mir_build`)
- #89114 (Fixes a technicality regarding the size of C's `char` type)
- #89115 (⬆️ rust-analyzer)
- #89126 (Fix ICE when `indirect_structural_match` is allowed)
- #89141 (Impl `Error` for `FromSecsError` without foreign type)
- #89142 (Fix match for placeholder region)
- #89147 (add case for checking const refs in check_const_value_eq)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Migrate in-tree crates to 2021
This replaces #89075 (cherry picking some of the commits from there), and closes#88637 and fixes#89074.
It excludes a migration of the library crates for now (see tidy diff) because we have some pending bugs around macro spans to fix there.
I instrumented bootstrap during the migration to make sure all crates moved from 2018 to 2021 had the compatibility warnings applied first.
Originally, the intent was to support cargo fix --edition within bootstrap, but this proved fairly difficult to pull off. We'd need to architect the check functionality to support running cargo check and cargo fix within the same x.py invocation, and only resetting sysroots on check. Further, it was found that cargo fix doesn't behave too well with "not quite workspaces", such as Clippy which has several crates. Bootstrap runs with --manifest-path ... for all the tools, and this makes cargo fix only attempt migration for that crate. We can't use e.g. --workspace due to needing to maintain sysroots for different phases of compilation appropriately.
It is recommended to skip the mass migration of Cargo.toml's to 2021 for review purposes; you can also use `git diff d6cd2c6c877110748296760aefddc21a0ea1d316 -I'^edition = .20...$'` to ignore the edition = 2018/21 lines in the diff.
Lower only one HIR owner at a time
Based on https://github.com/rust-lang/rust/pull/83723
Additional diff is here: https://github.com/cjgillot/rust/compare/ownernode...lower-mono
Lowering is very tangled and has a tendency to intertwine the transformation of different items. This PR aims at simplifying the logic by:
- moving global analyses to the resolver (item_generics_num_lifetimes, proc_macros, trait_impls);
- removing a few special cases (non-exported macros and use statements);
- restricting the amount of available information at any one time;
- avoiding back-and-forth between different owners: an item must now be lowered all at once, and its parent cannot refer to its nodes.
I also removed the sorting of bodies by span. The diagnostic ordering changes marginally, since definitions are pretty much sorted already according to the AST. This uncovered a subtlety in thir-unsafeck.
(While these items could logically be in different PRs, the dependency between commits and the amount of conflicts force a monolithic PR.)
This also adjusts the lint docs generation to accept (and ignore) an allow
attribute, rather than expecting the documentation to be immediately followed by
the lint name.
Add `ConstraintCategory::Usage` for handling aggregate construction
In some cases, we emit borrowcheck diagnostics pointing
at a particular field expression in a struct expression
(e.g. `MyStruct { field: my_expr }`). However, this
behavior currently relies on us choosing the
`ConstraintCategory::Boring` with the 'correct' span.
When adding additional variants to `ConstraintCategory`,
(or changing existing usages away from `ConstraintCategory::Boring`),
the current behavior can easily get broken, since a non-boring
constraint will get chosen over a boring one.
To make the diagnostic output less fragile, this commit
adds a `ConstraintCategory::Usage` variant. We use this variant
for the temporary assignments created for each field of
an aggregate we are constructing.
Using this new variant, we can emit a message mentioning
"this usage", emphasizing the fact that the error message
is related to the specific use site (in the struct expression).
This is preparation for additional work on improving NLL error messages
(see #57374)
Querify `FnAbi::of_{fn_ptr,instance}` as `fn_abi_of_{fn_ptr,instance}`.
*Note: opening this PR as draft because it's based on #88499*
This more or less replicates the `LayoutOf::layout_of` setup from #88499, to replace `FnAbi::of_{fn_ptr,instance}` with `FnAbiOf::fn_abi_of_{fn_ptr,instance}`, and also route them through queries (which `layout_of` has used for a while).
The two changes at the use sites (other than the names) are:
* return type is now wrapped in `&'tcx`
* the value *is* interned, which may affect performance
* the `extra_args` list is now an interned `&'tcx ty::List<Ty<'tcx>>`
* should be cheap (it's empty for anything other than C variadics)
Theoretically, a `FnAbiOfHelpers` implementer could choose to keep the `Result<...>` instead of eagerly erroring, but the only existing users of these APIs are codegen backends, so they don't (want to) take advantage of this.
At least miri could make use of this, since it prefers propagating errors (it "just" doesn't use `FnAbi` yet - cc `@RalfJung).`
The way this is done is probably less efficient than what is possible, because the queries handle the correctness-oriented API (i.e. the split into `fn` pointers vs instances), whereas a lower-level query could end up with more reuse between different instances with identical signatures.
r? `@nagisa` cc `@oli-obk` `@bjorn3`
Gather module items after lowering.
This avoids having a non-local analysis inside lowering.
By implementing `hir_module_items` using a visitor, we make sure that iterations and visitors are consistent.
Simplify lazy DefPathHash decoding by using an on-disk hash table.
This PR simplifies the logic around mapping `DefPathHash` values encountered during incremental compilation to valid `DefId`s in the current session. It is able to do so by using an on-disk hash table encoding that allows for looking up values directly, i.e. without deserializing the entire table.
The main simplification comes from not having to keep track of `DefPathHashes` being used during the compilation session.
We now fallback type variables using the following rules:
* Construct a coercion graph `A -> B` where `A` and `B` are unresolved
type variables or the `!` type.
* Let D be those variables that are reachable from `!`.
* Let N be those variables that are reachable from a variable not in
D.
* All variables in (D \ N) fallback to `!`.
* All variables in (D & N) fallback to `()`.
Point at argument instead of call for their obligations
When an obligation is introduced by a specific `fn` argument, point at
the argument instead of the `fn` call if the obligation fails to be
fulfilled.
Move the information about pointing at the call argument expression in
an unmet obligation span from the `FulfillmentError` to a new
`ObligationCauseCode`.
When giving an error about an obligation introduced by a function call
that an argument doesn't fulfill, and that argument is a block, add a
span_label pointing at the innermost tail expression.
Current output:
```
error[E0425]: cannot find value `x` in this scope
--> f10.rs:4:14
|
4 | Some(x * 2)
| ^ not found in this scope
error[E0277]: expected a `FnOnce<({integer},)>` closure, found `Option<_>`
--> f10.rs:2:31
|
2 | let p = Some(45).and_then({
| ______________________--------_^
| | |
| | required by a bound introduced by this call
3 | | |x| println!("doubling {}", x);
4 | | Some(x * 2)
| | -----------
5 | | });
| |_____^ expected an `FnOnce<({integer},)>` closure, found `Option<_>`
|
= help: the trait `FnOnce<({integer},)>` is not implemented for `Option<_>`
```
Previous output:
```
error[E0425]: cannot find value `x` in this scope
--> f10.rs:4:14
|
4 | Some(x * 2)
| ^ not found in this scope
error[E0277]: expected a `FnOnce<({integer},)>` closure, found `Option<_>`
--> f10.rs:2:22
|
2 | let p = Some(45).and_then({
| ^^^^^^^^ expected an `FnOnce<({integer},)>` closure, found `Option<_>`
|
= help: the trait `FnOnce<({integer},)>` is not implemented for `Option<_>`
```
Partially address #27300. Will require rebasing on top of #88546.
In some cases, we emit borrowcheck diagnostics pointing
at a particular field expression in a struct expression
(e.g. `MyStruct { field: my_expr }`). However, this
behavior currently relies on us choosing the
`ConstraintCategory::Boring` with the 'correct' span.
When adding additional variants to `ConstraintCategory`,
(or changing existing usages away from `ConstraintCategory::Boring`),
the current behavior can easily get broken, since a non-boring
constraint will get chosen over a boring one.
To make the diagnostic output less fragile, this commit
adds a `ConstraintCategory::Usage` variant. We use this variant
for the temporary assignments created for each field of
an aggregate we are constructing.
Using this new variant, we can emit a message mentioning
"this usage", emphasizing the fact that the error message
is related to the specific use site (in the struct expression).
This is preparation for additional work on improving NLL error messages
(see #57374)
Move the information about pointing at the call argument expression in
an unmet obligation span from the `FulfillmentError` to a new
`ObligationCauseCode`.
Const drop
The changes are pretty primitive at this point. But at least it works. ^-^
Problems with the current change that I can think of now:
- [x] `~const Drop` shouldn't change anything in the non-const world.
- [x] types that do not have drop glues shouldn't fail to satisfy `~const Drop` in const contexts. `struct S { a: u8, b: u16 }` This might not fail for `needs_non_const_drop`, but it will fail in `rustc_trait_selection`.
- [x] The current change accepts types that have `const Drop` impls but have non-const `Drop` glue.
Fixes#88424.
Significant Changes:
- `~const Drop` is no longer treated as a normal trait bound. In non-const contexts, this bound has no effect, but in const contexts, this restricts the input type and all of its transitive fields to either a) have a `const Drop` impl or b) can be trivially dropped (i.e. no drop glue)
- `T: ~const Drop` will not be linted like `T: Drop`.
- Instead of recursing and iterating through the type in `rustc_mir::transform::check_consts`, we use the trait system to special case `~const Drop`. See [`rustc_trait_selection::...::candidate_assembly#assemble_const_drop_candidates`](https://github.com/fee1-dead/rust/blob/const-drop/compiler/rustc_trait_selection/src/traits/select/candidate_assembly.rs#L817) and others.
Changes not related to `const Drop`ping and/or changes that are insignificant:
- `Node.constness_for_typeck` no longer returns `hir::Constness::Const` for type aliases in traits. This was previously used to hack how we determine default bound constness for items. But because we now use an explicit opt-in, it is no longer needed.
- Removed `is_const_impl_raw` query. We have `impl_constness`, and the only existing use of that query uses `HirId`, which means we can just operate it with hir.
- `ty::Destructor` now has a field `constness`, which represents the constness of the destructor.
r? `@oli-obk`
This encoding allows for random access without an expensive upfront decoding
state which in turn allows simplifying the DefPathIndex lookup logic without
regressing performance.
