Adds checks for:
* `no_core` attribute
* explicitly-enabled `legacy` symbol mangling
* mir_opt_level > 1 (which enables inlining)
I removed code from the `Inline` MIR pass that forcibly disabled
inlining if `-Zinstrument-coverage` was set. The default `mir_opt_level`
does not enable inlining anyway. But if the level is explicitly set and
is greater than 1, I issue a warning.
The new warnings show up in tests, which is much better for diagnosing
potential option conflicts in these cases.
Fix `unknown-crate` when using -Z self-profile with rustdoc
... by removing a duplicate `crate_name` field in `interface::Config`,
making it clear that rustdoc should be passing it to `config::Options` instead.
Unblocks https://github.com/rust-lang/rustc-perf/issues/797.
Implement lazy decoding of DefPathTable during incremental compilation
PR https://github.com/rust-lang/rust/pull/75813 implemented lazy decoding of the `DefPathTable` from crate metadata. However, it requires decoding the entire `DefPathTable` when incremental compilation is active, so that we can map a decoded `DefPathHash` to a `DefId` from an arbitrary crate.
This PR adds support for lazy decoding of dependency `DefPathTable`s when incremental compilation si active.
When we load the incremental cache and dep
graph, we need the ability to map a `DefPathHash` to a `DefId` in the
current compilation session (if the corresponding definition still
exists).
This is accomplished by storing the old `DefId` (that is, the `DefId`
from the previous compilation session) for each `DefPathHash` we need to
remap. Since a `DefPathHash` includes the owning crate, the old crate is
guaranteed to be the right one (if the definition still exists). We then
use the old `DefIndex` as an initial guess, which we validate by
comparing the expected and actual `DefPathHash`es. In most cases,
foreign crates will be completely unchanged, which means that we our
guess will be correct. If our guess is wrong, we fall back to decoding
the entire `DefPathTable` for the foreign crate. This still represents
an improvement over the status quo, since we can skip decoding the
entire `DefPathTable` for other crates (where all of our guesses were
correct).
Properly handle attributes on statements
We now collect tokens for the underlying node wrapped by `StmtKind`
nstead of storing tokens directly in `Stmt`.
`LazyTokenStream` now supports capturing a trailing semicolon after it
is initially constructed. This allows us to avoid refactoring statement
parsing to wrap the parsing of the semicolon in `parse_tokens`.
Attributes on item statements
(e.g. `fn foo() { #[bar] struct MyStruct; }`) are now treated as
item attributes, not statement attributes, which is consistent with how
we handle attributes on other kinds of statements. The feature-gating
code is adjusted so that proc-macro attributes are still allowed on item
statements on stable.
Two built-in macros (`#[global_allocator]` and `#[test]`) needed to be
adjusted to support being passed `Annotatable::Stmt`.
We now collect tokens for the underlying node wrapped by `StmtKind`
instead of storing tokens directly in `Stmt`.
`LazyTokenStream` now supports capturing a trailing semicolon after it
is initially constructed. This allows us to avoid refactoring statement
parsing to wrap the parsing of the semicolon in `parse_tokens`.
Attributes on item statements
(e.g. `fn foo() { #[bar] struct MyStruct; }`) are now treated as
item attributes, not statement attributes, which is consistent with how
we handle attributes on other kinds of statements. The feature-gating
code is adjusted so that proc-macro attributes are still allowed on item
statements on stable.
Two built-in macros (`#[global_allocator]` and `#[test]`) needed to be
adjusted to support being passed `Annotatable::Stmt`.
Always print lints from plugins, if they're available
Currently you can get a list of lints and lint groups by running `rustc
-Whelp`. This prints an additional line at the end:
```
Compiler plugins can provide additional lints and lint groups. To see a listing of these, re-run `rustc -W help` with a crate filename.
```
Clippy is such a "compiler plugin", that provides additional lints.
Running `clippy-driver -Whelp` (`rustc` wrapper) still only prints the
rustc lints with the above message at the end. But when running
`clippy-driver -Whelp main.rs`, where `main.rs` is any rust file, it
also prints Clippy lints. I don't think this is a good approach from a
UX perspective: Why is a random file necessary to print a help message?
This PR changes this behavior: Whenever a compiler callback
registers lints, it is assumed that these lints come from a plugin and
are printed without having to specify a Rust source file.
Fixesrust-lang/rust-clippy#6122
cc `@Manishearth` `@ebroto` for the Clippy changes.
Move lev_distance to rustc_ast, make non-generic
rustc_ast currently has a few dependencies on rustc_lexer. Ideally, an AST
would not have any dependency its lexer, for minimizing
design-time dependencies. Breaking this dependency would also have practical
benefits, since modifying rustc_lexer would not trigger a rebuild of rustc_ast.
This commit does not remove the rustc_ast --> rustc_lexer dependency,
but it does remove one of the sources of this dependency, which is the
code that handles fuzzy matching between symbol names for making suggestions
in diagnostics. Since that code depends only on Symbol, it is easy to move
it to rustc_span. It might even be best to move it to a separate crate,
since other tools such as Cargo use the same algorithm, and have simply
contain a duplicate of the code.
This changes the signature of find_best_match_for_name so that it is no
longer generic over its input. I checked the optimized binaries, and this
function was duplicated for nearly every call site, because most call sites
used short-lived iterator chains, generic over Map and such. But there's
no good reason for a function like this to be generic, since all it does
is immediately convert the generic input (the Iterator impl) to a concrete
Vec<Symbol>. This has all of the costs of generics (duplicated method bodies)
with no benefit.
Changing find_best_match_for_name to be non-generic removed about 10KB of
code from the optimized binary. I know it's a drop in the bucket, but we have
to start reducing binary size, and beginning to tame over-use of generics
is part of that.
Validate use of parameters in naked functions
* Reject use of parameters inside naked function body.
* Reject use of patterns inside function parameters, to emphasize role
of parameters a signature declaration (mirroring existing behaviour
for function declarations) and avoid generating code introducing
specified bindings.
Closes issues below by considering input to be ill-formed.
Closes#75922.
Closes#77848.
Closes#79350.
rustc_ast currently has a few dependencies on rustc_lexer. Ideally, an AST
would not have any dependency its lexer, for minimizing unnecessarily
design-time dependencies. Breaking this dependency would also have practical
benefits, since modifying rustc_lexer would not trigger a rebuild of rustc_ast.
This commit does not remove the rustc_ast --> rustc_lexer dependency,
but it does remove one of the sources of this dependency, which is the
code that handles fuzzy matching between symbol names for making suggestions
in diagnostics. Since that code depends only on Symbol, it is easy to move
it to rustc_span. It might even be best to move it to a separate crate,
since other tools such as Cargo use the same algorithm, and have simply
contain a duplicate of the code.
This changes the signature of find_best_match_for_name so that it is no
longer generic over its input. I checked the optimized binaries, and this
function was duplicated at nearly every call site, because most call sites
used short-lived iterator chains, generic over Map and such. But there's
no good reason for a function like this to be generic, since all it does
is immediately convert the generic input (the Iterator impl) to a concrete
Vec<Symbol>. This has all of the costs of generics (duplicated method bodies)
with no benefit.
Changing find_best_match_for_name to be non-generic removed about 10KB of
code from the optimized binary. I know it's a drop in the bucket, but we have
to start reducing binary size, and beginning to tame over-use of generics
is part of that.
* Reject use of parameters inside naked function body.
* Reject use of patterns inside function parameters, to emphasize role
of parameters a signature declaration (mirroring existing behaviour
for function declarations) and avoid generating code introducing
specified bindings.
Allow disabling TrapUnreachable via -Ztrap-unreachable=no
Currently this is only possible by defining a custom target, which is quite unwieldy.
This is useful for embedded targets where small code size is desired. For example, on my project (thumbv7em-none-eabi) this yields a 0.6% code size reduction: 132892 bytes -> 132122 bytes (770 bytes down).
This is useful for embedded targets where small code size is desired.
For example, on my project (thumbv7em-none-eabi) this yields a 0.6% code size reduction.
Change `-Z fewer-names` into an optional boolean flag and allow using it
to either discard value names when true or retain them when false,
regardless of other settings.
Simplify output capturing
This is a sequence of incremental improvements to the unstable/internal `set_panic` and `set_print` mechanism used by the `test` crate:
1. Remove the `LocalOutput` trait and use `Arc<Mutex<dyn Write>>` instead of `Box<dyn LocalOutput>`. In practice, all implementations of `LocalOutput` were just `Arc<Mutex<..>>`. This simplifies some logic and removes all custom `Sink` implementations such as `library/test/src/helpers/sink.rs`. Also removes a layer of indirection, as the outermost `Box` is now gone. It also means that locking now happens per `write_fmt`, not per individual `write` within. (So `"{} {}\n"` now results in one `lock()`, not four or more.)
2. Since in all cases the `dyn Write`s were just `Vec<u8>`s, replace the type with `Arc<Mutex<Vec<u8>>>`. This simplifies things more, as error handling and flushing can be removed now. This also removes the hack needed in the default panic handler to make this work with `::realstd`, as (unlike `Write`) `Vec<u8>` is from `alloc`, not `std`.
3. Replace the `RefCell`s by regular `Cell`s. The `RefCell`s were mostly used as `mem::replace(&mut *cell.borrow_mut(), something)`, which is just `Cell::replace`. This removes an unecessary bookkeeping and makes the code a bit easier to read.
4. Merge `set_panic` and `set_print` into a single `set_output_capture`. Neither the test crate nor rustc (the only users of this feature) have a use for using these separately. Merging them simplifies things even more. This uses a new function name and feature name, to make it clearer this is internal and not supposed to be used by other crates.
Might be easier to review per commit.
It was only ever used with Vec<u8> anyway. This simplifies some things.
- It no longer needs to be flushed, because that's a no-op anyway for
a Vec<u8>.
- Writing to a Vec<u8> never fails.
- No #[cfg(test)] code is needed anymore to use `realstd` instead of
`std`, because Vec comes from alloc, not std (like Write).
* `-Zinline-mir-threshold` to change the default threshold.
* `-Zinline-mir-hint-threshold` to change the threshold used by
functions with inline hint.
rustc_ast: Do not panic by default when visiting macro calls
Panicking by default made sense when we didn't have HIR or MIR and everything worked on AST, but now all AST visitors run early and majority of them have to deal with macro calls, often by ignoring them.
The second commit renames `visit_mac` to `visit_mac_call`, the corresponding structures were renamed earlier in https://github.com/rust-lang/rust/pull/69589.
Do not remove tokens before AST json serialization
`TokenStripper` is error-prone and introduces one more use of `MutVisitor`.
It's much simpler to treat serialization as just one more place that wants lazy token stream to turn into a real token stream.
Also, no code is better than more code, in general.
r? @Aaron1011
(I also merged tests for `TokenStripper` ICEs into one.)
Implement -Z relax-elf-relocations=yes|no
This lets rustc users tweak whether the linker should relax ELF relocations without recompiling a whole new target with its own libcore etc.
Implement rustc side of report-future-incompat
cc https://github.com/rust-lang/rust/issues/71249
This is an alternative to `@pnkfelix's` initial implementation in https://github.com/pnkfelix/rust/commits/prototype-rustc-side-of-report-future-incompat (mainly because I started working before seeing that branch 😄 ).
My approach outputs the entire original `Diagnostic`, in a way that is compatible with incremental compilation. This is not yet integrated with compiletest, but can be used manually by passing `-Z emit-future-incompat-report` to `rustc`.
Several changes are made to support this feature:
* The `librustc_session/lint` module is moved to a new crate `librustc_lint_defs` (name bikesheddable). This allows accessing lint definitions from `librustc_errors`.
* The `Lint` struct is extended with an `Option<FutureBreakage>`. When present, it indicates that we should display a lint in the future-compat report. `FutureBreakage` contains additional information that we may want to display in the report (currently, a `date` field indicating when the crate will stop compiling).
* A new variant `rustc_error::Level::Allow` is added. This is used when constructing a diagnostic for a future-breakage lint that is marked as allowed (via `#[allow]` or `--cap-lints`). This allows us to capture any future-breakage diagnostics in one place, while still discarding them before they are passed to the `Emitter`.
* `DiagnosticId::Lint` is extended with a `has_future_breakage` field, indicating whether or not the `Lint` has future breakage information (and should therefore show up in the report).
* `Session` is given access to the `LintStore` via a new `SessionLintStore` trait (since `librustc_session` cannot directly reference `LintStore` without a cyclic dependency). We use this to turn a string `DiagnosticId::Lint` back into a `Lint`, to retrieve the `FutureBreakage` data.
Currently, `FutureBreakage.date` is always set to `None`. However, this could potentially be interpreted by Cargo in the future.
I've enabled the future-breakage report for the `ARRAY_INTO_ITER` lint, which can be used to test out this PR. The intent is to use the field to allow Cargo to determine the date of future breakage (as described in [RFC 2834](https://github.com/rust-lang/rfcs/blob/master/text/2834-cargo-report-future-incompat.md)) without needing to parse the diagnostic itself.
cc `@pnkfelix`
This lets rustc users tweak whether the linker should relax ELF relocations,
namely whether it should emit R_X86_64_GOTPCRELX relocations instead of
R_X86_64_GOTPCREL, as the former is allowed by the ABI to be further
optimised. The default value is whatever the target defines.
Implement -Z function-sections=yes|no
This lets rustc users tweak whether all functions should be put in their own TEXT section, using whatever default value the target defines if the flag is missing.
I'm having fun experimenting with musl libc and trying to implement the start symbol in Rust, that means avoiding code that requires relocations, and AFAIK putting everything in its own section makes the toolchain generate `GOTPCREL` relocations for symbols that could use plain old PC-relative addressing (at least on `x86_64`) if they were all in the same section.
Capture output from threads spawned in tests
This is revival of #75172.
Original text:
> Fixes#42474.
>
> r? `@dtolnay` since you expressed interest in this, but feel free to redirect if you aren't the right person anymore.
---
Closes#75172.
This lets rustc users tweak whether all functions should be put in their own
TEXT section, using whatever default value the target defines if the flag
is missing.
Add cg_clif as optional codegen backend
Rustc_codegen_cranelift is an alternative codegen backend for rustc based on Cranelift. It has the potential to improve compilation times in debug mode. In my experience the compile time improvements over debug mode LLVM for a clean build are about 20-30% in most cases.
This PR adds cg_clif as optional codegen backend. By default it is only enabled for `./x.py check`. It can be enabled for `./x.py build` too by adding `cranelift` to the `rust.codegen-backends` array in `config.toml`.
MCP: https://github.com/rust-lang/compiler-team/issues/270
r? `@Mark-Simulacrum`
