Add support for LLVM coverage mapping format versions 5 and 6
This PR cherry-pick's Swatinem's initial commit in unsubmitted PR #90047.
My additional commit augments Swatinem's great starting point, but adds full support for LLVM
Coverage Mapping Format version 6, conditionally, if compiling with LLVM 13.
Version 6 requires adding the compilation directory when file paths are
relative, and since Rustc coverage maps use relative paths, we should
add the expected compilation directory entry.
Note, however, that with the compilation directory, coverage reports
from `llvm-cov show` can now report file names (when the report includes
more than one file) with the full absolute path to the file.
This would be a problem for test results, but the workaround (for the
rust coverage tests) is to include an additional `llvm-cov show`
parameter: `--compilation-dir=.`
Remove workaround for the forward progress handling in LLVM
this workaround was only needed for LLVM < 12 and the minimum LLVM version was updated to 12 in #90175
Fix ld64 flags
- The `-exported_symbols_list` argument appears to be malformed for `ld64` (if you are not going through `clang`).
- The `-dynamiclib` argument isn't support for `ld64`. It should be guarded behind a compiler flag.
These problems are fixed by these changes. I have also refactored the way linker arguments are generated to be ld/compiler agnostic and therefore less error prone.
These changes are necessary to support cross-compilation to darwin targets.
Leave -Z strip available temporarily as an alias, to avoid breaking
cargo until cargo transitions to using -C strip. (If the user passes
both, the -C version wins.)
This commit refactors linker argument generation to leverage a helper
function that abstracts away details governing how these arguments are
transformed and provided to the linker.
This fixes the misuse of the `-exported_symbols_list` when an ld-like
linker is used rather than a compiler. A compiler would expect
`-Wl,-exported_symbols_list,path` but ld would expect
`-exported_symbols_list` and `path` as two seperate arguments. Prior
to this change, an ld-like linker was given
`-exported_symbols_list,path`.
Linker arguments must transformed when Rust is interacting with the
linker through a compiler. This commit introduces a helper function
that abstracts away details of this transformation.
Record more artifact sizes during self-profiling.
This PR adds artifact size recording for
- "linked artifacts" (executables, RLIBs, dylibs, static libs)
- object files
- dwo files
- assembly files
- crate metadata
- LLVM bitcode files
- LLVM IR files
- codegen unit size estimates
Currently the identifiers emitted for these are hard-coded as string literals. Is it worth adding constants to https://github.com/rust-lang/measureme/blob/master/measureme/src/rustc.rs instead? We don't do that for query names and the like -- but artifact kinds might be more stable than query names.
enable `dotprod` target feature in arm
To implement `vdot` neon insturction in stdarch, we need to enable `dotprod` target feature in arm in rustc.
r? `@Amanieu`
Don't abort compilation after giving a lint error
The only reason to use `abort_if_errors` is when the program is so broken that either:
1. later passes get confused and ICE
2. any diagnostics from later passes would be noise
This is never the case for lints, because the compiler has to be able to deal with `allow`-ed lints.
So it can continue to lint and compile even if there are lint errors.
Closes https://github.com/rust-lang/rust/issues/82761. This is a WIP because I have a feeling it will exit with 0 even if there were lint errors; I don't have a computer that can build rustc locally at the moment.
The only reason to use `abort_if_errors` is when the program is so broken that either:
1. later passes get confused and ICE
2. any diagnostics from later passes would be noise
This is never the case for lints, because the compiler has to be able to deal with `allow`-ed lints.
So it can continue to lint and compile even if there are lint errors.
In https://reviews.llvm.org/D71059 LLVM 11, the time trace profiler was
extended to support multiple threads.
`timeTraceProfilerInitialize` creates a thread local profiler instance.
When a thread finishes `timeTraceProfilerFinishThread` moves a thread
local instance into a global collection of instances. Finally when all
codegen work is complete `timeTraceProfilerWrite` writes data from the
current thread local instance and the instances in global collection
of instances.
Previously, the profiler was intialized on a single thread only. Since
this thread performs no code generation on its own, the resulting
profile was empty.
Update LLVM codegen to initialize & finish time trace profiler on each
code generation thread.
Add LLVM CFI support to the Rust compiler
This PR adds LLVM Control Flow Integrity (CFI) support to the Rust compiler. It initially provides forward-edge control flow protection for Rust-compiled code only by aggregating function pointers in groups identified by their number of arguments.
Forward-edge control flow protection for C or C++ and Rust -compiled code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code share the same virtual address space) will be provided in later work as part of this project by defining and using compatible type identifiers (see Type metadata in the design document in the tracking issue #89653).
LLVM CFI can be enabled with -Zsanitizer=cfi and requires LTO (i.e., -Clto).
Thank you, `@eddyb` and `@pcc,` for all the help!
Properly check `target_features` not to trigger an assertion
Fixes#89875
I think it should be a condition instead of an assertion to check if it's a register as it's possible that `reg` is a register class.
Also, this isn't related to the issue directly, but `is_target_supported` doesn't check `target_features` attributes. Is there any way to check it on rustc_codegen_llvm?
r? `@Amanieu`
Avoid a branch on key being local for queries that use the same local and extern providers
Currently based on https://github.com/rust-lang/rust/pull/85810 as it slightly conflicts with it. Only the last two commits are new.
This commit adds LLVM Control Flow Integrity (CFI) support to the Rust
compiler. It initially provides forward-edge control flow protection for
Rust-compiled code only by aggregating function pointers in groups
identified by their number of arguments.
Forward-edge control flow protection for C or C++ and Rust -compiled
code "mixed binaries" (i.e., for when C or C++ and Rust -compiled code
share the same virtual address space) will be provided in later work as
part of this project by defining and using compatible type identifiers
(see Type metadata in the design document in the tracking issue #89653).
LLVM CFI can be enabled with -Zsanitizer=cfi and requires LTO (i.e.,
-Clto).
Erase late-bound regions before computing vtable debuginfo name.
Fixes#90019.
The `msvc_enum_fallback()` for computing enum type names needs to access the memory layout of niche enums in order to determine the type name. `compute_debuginfo_vtable_name()` did not properly erase regions before computing type names which made memory layout computation ICE when encountering un-erased regions.
r? `@wesleywiser`
This performs a substitution of code following the pattern:
let <id> = if let <pat> = ... { identity } else { ... : ! };
To simplify it to:
let <pat> = ... { identity } else { ... : ! };
By adopting the let_else feature.
Create more accurate debuginfo for vtables.
Before this PR all vtables would have the same name (`"vtable"`) in debuginfo. Now they get an unambiguous name that identifies the implementing type and the trait that is being implemented.
This is only one of several possible improvements:
- This PR describes vtables as arrays of `*const u8` pointers. It would nice to describe them as structs where function pointer is represented by a field with a name indicative of the method it maps to. However, this requires coming up with a naming scheme that avoids clashes between methods with the same name (which is possible if the vtable contains multiple traits).
- The PR does not update the debuginfo we generate for the vtable-pointer field in a fat `dyn` pointer. Right now there does not seem to be an easy way of getting ahold of a vtable-layout without also knowing the concrete self-type of a trait object.
r? `@wesleywiser`
rustc_driver: Enable the `WARN` log level by default
This commit changes the `tracing_subscriber` initialization in
`rustc_driver` so that the `WARN` verbosity level is enabled by default
when the `RUSTC_LOG` env variable is empty. If the `RUSTC_LOG` env
variable is set, the filter string in the environment variable is
honored, instead.
Fixes#76824Closes#89623
cc ``@eddyb,`` ``@oli-obk``
Turn vtable_allocation() into a query
This PR removes the untracked vtable-const-allocation cache from the `tcx` and turns the `vtable_allocation()` method into a query.
The change is pretty straightforward and should be backportable without too much effort.
Fixes https://github.com/rust-lang/rust/issues/89598.
Before this commit all vtables would have the same name "vtable" in
debuginfo. Now they get a name that identifies the implementing type
and the trait that is being implemented.
On macOS, make strip="symbols" not pass any options to strip
This makes the output with `strip="symbols"` match the result of just
calling `strip` on the output binary, minimizing the size of the binary.
