If a dylib is being produced, the compiler will now first check to see if it can
be created entirely statically before falling back to dynamic dependencies. This
behavior can be overridden with `-C prefer-dynamic`.
Due to the alteration in behavior, this is a breaking change. Any previous users
relying on dylibs implicitly maximizing dynamic dependencies should start
passing `-C prefer-dynamic` to compilations.
Closes#18499
[breaking-change]
Removes all target-specific knowledge from rustc. Some targets have changed
during this, but none of these should be very visible outside of
cross-compilation. The changes make our targets more consistent.
iX86-unknown-linux-gnu is now only available as i686-unknown-linux-gnu. We
used to accept any value of X greater than 1. i686 was released in 1995, and
should encompass the bare minimum of what Rust supports on x86 CPUs.
The only two windows targets are now i686-pc-windows-gnu and
x86_64-pc-windows-gnu.
The iOS target has been renamed from arm-apple-ios to arm-apple-darwin.
A complete list of the targets we accept now:
arm-apple-darwin
arm-linux-androideabi
arm-unknown-linux-gnueabi
arm-unknown-linux-gnueabihf
i686-apple-darwin
i686-pc-windows-gnu
i686-unknown-freebsd
i686-unknown-linux-gnu
mips-unknown-linux-gnu
mipsel-unknown-linux-gnu
x86_64-apple-darwin
x86_64-unknown-freebsd
x86_64-unknown-linux-gnu
x86_64-pc-windows-gnu
Closes#16093
[breaking-change]
If a dylib is being produced, the compiler will now first check to see if it can
be created entirely statically before falling back to dynamic dependencies. This
behavior can be overridden with `-C prefer-dynamic`.
Due to the alteration in behavior, this is a breaking change. Any previous users
relying on dylibs implicitly maximizing dynamic dependencies should start
passing `-C prefer-dynamic` to compilations.
Closes#18499
[breaking-change]
Enable parallel codegen (2 units) by default when --opt-level is 0 or 1. This
gives a minor speedup on large crates (~10%), with only a tiny slowdown (~2%)
for small ones (which usually build in under a second regardless). The current
default (no parallelization) is used when the user requests optimization
(--opt-level 2 or 3), and when the user has enabled LTO (which is incompatible
with parallel codegen).
This commit also changes the rust build system to use parallel codegen
when appropriate. This means codegen-units=4 for stage0 always, and
also for stage1 and stage2 when configured with --disable-optimize.
(Other settings use codegen-units=1 for stage1 and stage2, to get
maximum performance for release binaries.) The build system also sets
codegen-units=1 for compiletest tests (compiletest does its own
parallelization) and uses the same setting as stage2 for crate tests.
Adds a new configure flag, --release-channel, which determines how the version
number should be augmented with a release label, as well as how the distribution
artifacts will be named. This is entirely for use by the build automation.
--release-channel can be either 'source', 'nightly', 'beta', or 'stable'.
Here's a summary of the affect of these values on version number and
artifact naming, respectively:
* source - '0.12.0-pre', 'rust-0.12.0-pre-...'
* nightly - '0.12.0-nightly', 'rust-nightly-...'
* beta - '0.12.0-beta', 'rust-beta-...'
* stable - '0.12.0', 'rust-0.12.0-...'
Per http://discuss.rust-lang.org/t/rfc-impending-changes-to-the-release-process/508/1
The performance hit from these checks is significant, but unoptimized
builds are already incredibly slow. Enabling these checks results in
better test coverage since there are bots doing unoptimized builds, and
the cost is relatively small in the context of an unoptimized build.
This also allows using `JEMALLOC_FLAGS` to override the default
configure flags.
This commit disables rustc's emission of rpath attributes into dynamic libraries
and executables by default. The functionality is still preserved, but it must
now be manually enabled via a `-C rpath` flag.
This involved a few changes to the local build system:
* --disable-rpath is now the default configure option
* Makefiles now prefer our own LD_LIBRARY_PATH over the user's LD_LIBRARY_PATH
in order to support building rust with rust already installed.
* The compiletest program was taught to correctly pass through the aux dir as a
component of LD_LIBRARY_PATH in more situations.
The major impact of this change is that neither rustdoc nor rustc will work
out-of-the-box in all situations because they are dynamically linked. It must be
arranged to ensure that the libraries of a rust installation are part of the
LD_LIBRARY_PATH. The default installation paths for all platforms ensure this,
but if an installation is in a nonstandard location, then configuration may be
necessary.
Additionally, for all developers of rustc, it will no longer be possible to run
$target/stageN/bin/rustc out-of-the-box. The old behavior can be regained
through the `--enable-rpath` option to the configure script.
This change brings linux/mac installations in line with windows installations
where rpath is not possible.
Closes#11747
[breaking-change]
The compiler will no longer insert a hash or version into a filename by default.
Instead, all output is simply based off the crate name being compiled. For
example, a crate name of `foo` would produce the following outputs:
* bin => foo
* rlib => libfoo.rlib
* dylib => libfoo.{so,dylib} or foo.dll
* staticlib => libfoo.a
The old behavior has been moved behind a new codegen flag,
`-C extra-filename=<hash>`. For example, with the "extra filename" of `bar` and
a crate name of `foo`, the following outputs would be generated:
* bin => foo (same old behavior)
* rlib => libfoobar.rlib
* dylib => libfoobar.{so,dylib} or foobar.dll
* staticlib => libfoobar.a
The makefiles have been altered to pass a hash by default to invocations of
`rustc` so all installed rust libraries will have a hash in their filename. This
is done because the standard libraries are intended to be installed into
privileged directories such as /usr/local. Additionally, it involves very few
build system changes!
RFC: 0035-remove-crate-id
[breaking-change]
This commit disables rustc's emission of rpath attributes into dynamic libraries
and executables by default. The functionality is still preserved, but it must
now be manually enabled via a `-C rpath` flag.
This involved a few changes to the local build system:
* --disable-rpath is now the default configure option
* Makefiles now prefer our own LD_LIBRARY_PATH over the user's LD_LIBRARY_PATH
in order to support building rust with rust already installed.
* The compiletest program was taught to correctly pass through the aux dir as a
component of LD_LIBRARY_PATH in more situations.
The major impact of this change is that neither rustdoc nor rustc will work
out-of-the-box in all situations because they are dynamically linked. It must be
arranged to ensure that the libraries of a rust installation are part of the
LD_LIBRARY_PATH. The default installation paths for all platforms ensure this,
but if an installation is in a nonstandard location, then configuration may be
necessary.
Additionally, for all developers of rustc, it will no longer be possible to run
$target/stageN/bin/rustc out-of-the-box. The old behavior can be regained
through the `--enable-rpath` option to the configure script.
This change brings linux/mac installations in line with windows installations
where rpath is not possible.
Closes#11747
[breaking-change]
This involved a few changes to the local build system:
* Makefiles now prefer our own LD_LIBRARY_PATH over the user's LD_LIBRARY_PATH
in order to support building rust with rust already installed.
* The compiletest program was taught to correctly pass through the aux dir as a
component of LD_LIBRARY_PATH in more situations.
This change was spliced out of #14832 to consist of just the fixes to running
tests without an rpath setting embedded in executables.
Two line summary: Distinguish HOST_RPATH and TARGET_RPATH; added
RPATH_LINK_SEARCH; skip tests broken in stage1; general cleanup.
`HOST_RPATH_VAR$(1)_T_$(2)_H_$(3)` and `TARGET_RPATH_VAR$(1)_T_$(2)_H_$(3)`
both match the format of the old `RPATH_VAR$(1)_T_$(2)_H_$(3)` (which
is still being set the same way that it was before, to one of either
HOST/TARGET depending on what stage we are building). Namely, the format
is <XXX>_RPATH_VAR = "<LD_LIB_PATH_ENVVAR>=<COLON_SEP_PATH_ENTRIES>"
What this commit does:
* Pass both of the (newly introduced) HOST and TARGET rpath setup vars
to `maketest.py`
* Update `maketest.py` to no longer update the LD_LIBRARY_PATH itself
Instead, it passes along the HOST and TARGET rpath setup vars in
environment variables `HOST_RPATH_ENV` and `TARGET_RPATH_ENV`
* Also, pass the current stage number to maketest.py; it in turn
passes it (via an env var) to run-make tests.
This allows the run-make tests to selectively change behavior
(e.g. turn themselves off) to deal with incompatibilities with
e.g. stage1.
* Cleanup: Distinguish in tools.mk between the command to run (`RUN`)
and the file to generate to drive that command (`RUN_BINFILE`). The
main thing this enables is that `RUN` can now setup the
`TARGET_RPATH_ENV` without having to dirty up the runner code in
each of the `run-make` Makefiles.
* Cleanup: Factored out commands to delete dylib/rlib into
REMOVE_DYLIBS/REMOVE_RLIBS.
There were places where we were only calling `rm $(call DYLIB,foo)`
even though we really needed to get rid of the whole glob (at least
based on alex's findings on #13753 that removing the symlink does not
suffice).
Therefore rather than peppering the code with the awkward
`rm $(TMPDIR)/$(call DYLIB_GLOB,foo)`, I instead introduced a common
`REMOVE_DYLIBS` user function that expands into that when called.
After I adding an analogous `REMOVE_RLIBS`, I changed all of the
existing calls that rm dylibs or rlibs to use these routines
instead.
Note that the latter is not a true refactoring since I may have
changed cases where it was our intent to only remove the sym-link.
(But if that is the case, then we need to more deeply investigate
alex's findings on #13753 where the system was still dynamically
loading up the non-symlinked libraries that it finds on the load
path.)
* Added RPATH_LINK_SEARCH command and use it on Linux.
On some platforms, namely Linux, when you have libboot.so that has
its internal rpath set (to e.g. $(ORIGIN)/path/to/HOSTDIR), the
linker still complains when you do the link step and it does not
know where to find libraries that libboot.so depends upon that live
in HOSTDIR (think e.g. librustuv.so).
As far as I can tell, the GNU linker will consult the
LD_LIBRARY_PATH as part of the linking process to find such
libraries. But if you want to be more careful and not override
LD_LIBRARY_PATH for the `gcc` invocation, then you need some other
way to tell the linker where it can find the libraries that
libboot.so needs. The solution to this on Linux is the
`-Wl,-rpath-link` command line option.
However, this command line option does not exist on Mac OS X, (which
appears to be figuring out how to resolve the libboot.dylib
dependency by some other means, perhaps by consulting the rpath
setting within libboot.dylib).
So, in order to abstract over this distinction, I added the
RPATH_LINK_SEARCH macro to the run-make infrastructure and added
calls to it where necessary to get Linux working. On architectures
other than Linux, the macro expands to nothing.
* Disable miscellaneous tests atop stage1.
* An especially interesting instance of the previous bullet point:
Excuse regex from doing rustdoc tests atop stage1.
This was a (nearly-) final step to get `make check-stage1` working
again.
The use of a special-case check for regex here is ugly but is
analogous other similar checks for regex such as the one that landed
in PR #13844.
The way this is written, the user will get a reminder that
doc-crate-regex is being skipped whenever their rules attempt to do
the crate documentation tests. This is deliberate: I want people
running `make check-stage1` to be reminded about which cases are
being skipped. (But if such echo noise is considered offensive, it
can obviously be removed.)
* Got windows working with the above changes.
This portion of the commit is a cleanup revision of the (previously
mentioned on try builds) re-architecting of how the LD_LIBRARY_PATH
setup and extension is handled in order to accommodate Windows' (1.)
use of `$PATH` for that purpose and (2.) use of spaces in `$PATH`
entries (problematic for make and for interoperation with tools at
the shell).
* In addition, since the code has been rearchitected to pass the
HOST_RPATH_DIR/TARGET_RPATH_DIR rather than a whole sh
environment-variable setting command, there is no need to for the
convert_path_spec calls in maketest.py, which in fact were put in
place to placate Windows but were now causing the Windows builds to
fail. Instead we just convert the paths to absolute paths just like
all of the other path arguments.
Also, note for makefile hackers: apparently you cannot quote operands
to `ifeq` in Makefile (or at least, you need to be careful about
adding them, e.g. to only one side).
After removing absolute rpaths, cross compile builds (notably the nightly
builders) broke. This is because the RPATH was pointing at an empty directory
because only the rustc binary is copied over, not all of the target libraries.
This modifies the cross compile logic to fixup the rpath of the stage0
cross-compiled rustc to point to where it came from.
Concerns have been raised about using absolute rpaths in #11746, and this is the
first step towards not relying on rpaths at all. The only current use case for
an absolute rpath is when a non-installed rust builds an executable that then
moves from is built location. The relative rpath back to libstd and absolute
rpath to the installation directory still remain (CFG_PREFIX).
Closes#11746
Rebasing of #12754
LLVM's tools are not contained in the local directory if --llvm-root is used by
the ./configure script. This fixes the installation path to be the root provided
by --llvm-root.
Because the build system treats Makefile.in and the .mk files slightly
differently (.in is copied, .mk are included), this makes the system
more uniform. Fewer build system changes will require a complete
reconfigure.
