rustdoc: Fixes with --test-run-directory and relative paths.
Fixes#112191Fixes#112210
This fixes some issues with `--test-run-directory` and its interaction with `--runtool` and `--persist-doctests`. Relative directories don't work with `Command::current_dir` very well because it has platform-specific behavior with relative paths. This fixes it by avoiding the use of relative paths.
This is needed because cargo is switching to use `--test-run-directory`, and it uses relative paths when interacting with rustdoc/rustc.
coverage: Anonymize line numbers in `run-coverage` test snapshots
LLVM's coverage reporter always prints line numbers in its coverage reports.
For testing purposes this is slightly inconvenient, because it means that adding or removing a line in a test file causes all subsequent lines in the snapshot to change. That makes it harder to see the actually meaningful changes in the re-blessed snapshot.
---
This change fixes that by adding another normalization pass that replaces all line numbers in the coverage reports with `LL`, which is similar to what UI tests tell the compiler to do when emitting line numbers in error messages.
Only run MaybeInitializedPlaces dataflow once to elaborate drops
This pass allows forward dataflow analyses to modify the CFG depending on the dataflow state. This possibility is used for the `MaybeInitializedPlace` analysis in drop elaboration, to skip the dataflow effect of dead unwinds without having to compute dataflow twice.
Fix argument removal suggestion around macros
Fixes#112437.
Fixes#113866.
Helps with #114255.
The issue was that `span.find_ancestor_inside(outer)` could previously return a span with a different expansion context from `outer`.
This happens for example for the built-in macro `panic!`, which expands to another macro call of `panic_2021!` or `panic_2015!`. Because the call site of `panic_20xx!` has not associated source code, its span currently points to the call site of `panic!` instead.
Something similar also happens items that get desugared in AST->HIR lowering. For example, `for` loops get two spans: One "inner" span that has the `.desugaring_kind()` kind set to `DesugaringKind::ForLoop` and one "outer" span that does not. Similar to the macro situation, both of these spans point to the same source code, but have different expansion contexts.
This causes problems, because joining two spans with different expansion contexts will usually[^1] not actually join them together to avoid creating "spaghetti" spans that go from the macro definition to the macro call. For example, in the following snippet `full_span` might not actually contain the `adjusted_start` and `adjusted_end`. This caused the broken suggestion / debug ICE in the linked issues.
```rust
let adjusted_start = start.find_ancestor_inside(shared_ancestor);
let adjusted_end = end.find_ancestor_inside(shared_ancestor);
let full_span = adjusted_start.to(adjusted_end)
```
To fix the issue, this PR introduces a new method, `find_ancestor_inside_same_ctxt`, which combines the functionality of `find_ancestor_inside` and `find_ancestor_in_same_ctxt`: It finds an ancestor span that is contained within the parent *and* has the same syntax context, and is therefore safe to extend. This new method should probably be used everywhere, where the returned span is extended, but for now it is just used for the argument removal suggestion.
Additionally, this PR fixes a second issue where the function call itself is inside a macro but the arguments come from outside the macro. The test is added in the first commit to include stderr diff, so this is best reviewed commit by commit.
[^1]: If one expansion context is the root context and the other is not.
Don't add associated type bound for non-types
We had this fix for equality constraints (#99890), but for some reason not trait constraints 😅Fixes#114744
Cleaner assert_eq! & assert_ne! panic messages
This PR finishes refactoring of the assert messages per #94005. The panic message format change #112849 used to be part of this PR, but has been factored out and just merged. It might be better to keep both changes in the same release once FCP vote completes.
Modify panic message for `assert_eq!`, `assert_ne!`, the currently unstable `assert_matches!`, as well as the corresponding `debug_assert_*` macros.
```rust
assert_eq!(1 + 1, 3);
assert_eq!(1 + 1, 3, "my custom message value={}!", 42);
```
#### Old messages
```plain
thread 'main' panicked at $DIR/main.rs:6:5:
assertion failed: `(left == right)`
left: `2`,
right: `3`
```
```plain
thread 'main' panicked at $DIR/main.rs:6:5:
assertion failed: `(left == right)`
left: `2`,
right: `3`: my custom message value=42!
```
#### New messages
```plain
thread 'main' panicked at $DIR/main.rs:6:5:
assertion `left == right` failed
left: 2
right: 3
```
```plain
thread 'main' panicked at $DIR/main.rs:6:5:
assertion `left == right` failed: my custom message value=42!
left: 2
right: 3
```
History of fixing #94005
* #94016 was a lengthy PR that was abandoned
* #111030 was similar, but it stringified left and right arguments, and thus caused compile time performance issues, thus closed
* #112849 factored out the two-line formatting of all panic messages
Fixes#94005
r? `@m-ou-se`
Modify panic message for `assert_eq!`, `assert_ne!`, the currently unstable `assert_matches!`, as well as the corresponding `debug_assert_*` macros.
```rust
assert_eq!(1 + 1, 3);
assert_eq!(1 + 1, 3, "my custom message value={}!", 42);
```
```plain
thread 'main' panicked at $DIR/main.rs:6:5:
assertion failed: `(left == right)`
left: `2`,
right: `3`
```
```plain
thread 'main' panicked at $DIR/main.rs:6:5:
assertion failed: `(left == right)`
left: `2`,
right: `3`: my custom message value=42!
```
```plain
thread 'main' panicked at $DIR/main.rs:6:5:
assertion `left == right` failed
left: 2
right: 3
```
```plain
thread 'main' panicked at $DIR/main.rs:6:5:
assertion `left == right` failed: my custom message value=42!
left: 2
right: 3
```
This PR is a simpler subset of the #111030, but it does NOT stringify the original left and right source code assert expressions, thus should be faster to compile.
Point at return type when it influences non-first `match` arm
When encountering code like
```rust
fn foo() -> i32 {
match 0 {
1 => return 0,
2 => "",
_ => 1,
}
}
```
Point at the return type and not at the prior arm, as that arm has type `!` which isn't influencing the arm corresponding to arm `2`.
Fix#78124.
Deny `FnDef` in patterns
We can only see these via `const { .. }` patterns, which are unstable.
cc #76001 (tracking issue for inline const pats)
Fixes#114658Fixes#114659
Point out expectation even if we have `TypeError::RegionsInsufficientlyPolymorphic`
just a minor tweak, since saying "one type is more general than the other" kinda sucks if we don't actually point out two types.
Separate `consider_unsize_to_dyn_candidate` from other unsize candidates
Move the unsize candidate assembly *just for* `T -> dyn Trait` out of `assemble_candidates_via_self_ty` so that we only consider it once, instead of for every normalization step of the self ty. This makes sure that we don't assemble several candidates that are equal modulo normalization when we really don't care about normalizing the self type of an `T: Unsize<dyn Trait>` goal anyways.
Fixesrust-lang/trait-system-refactor-initiative#57
r? lcnr
Probe when assembling upcast candidates so they don't step on eachother's toes in new solver
Lack of a probe causes one candidate to disqualify the other due to inference side-effects.
r? lcnr
Upgrade std to gimli 0.28.0
Gimli 0.28 removed its `From<EndianSlice> for &[u8]` that was the root cause of #113238.
This dependency update mirrors rust-lang/backtrace-rs#557, but since that doesn't require any code changes in `backtrace`, we can also apply that right away for our nested `std/backtrace` feature.
Add test for unknown_lints from another file.
This adds a test for #84936 which was incidentally fixed via #97266. It is a strange issue where `#![allow(unknown_lints)]` at the crate root was not applying to unknown lints that fired in a non-inline-module. I did not dig further into how #97266 fixed it, but I did verify it. I couldn't find any existing tests which did anything similar.
Closes#84936
Warn on inductive cycle in coherence leading to impls being considered not overlapping
This PR implements a `coinductive_overlap_in_coherence` lint (#114040), which warns users against cases where two impls are considered **not** to overlap during coherence due to an inductive cycle disproving one of the predicates after unifying the two impls.
Cases where this lint fires will become an overlap error if we ever move to coinduction, so I'd like to make this a warning to avoid having more crates take advantage of this behavior in the mean time. Also, since the new trait solver treats inductive cycles as ambiguity, not an error, this is a blocker for landing the new trait solver in coherence.
add a csky-unknown-linux-gnuabiv2 target
This is the rustc side changes to support csky based Linux target(`csky-unknown-linux-gnuabiv2`).
Tier 3 policy:
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
I pledge to do my best maintaining it.
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
This `csky` section is the arch name and the `unknown-linux` section is the same as other linux target, and `gnuabiv2` is from the cross-compile toolchain of `gcc`
> Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
I think the explanation in platform support doc is enough to make this aspect clear.
> Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
It's using open source tools only.
> The target must not introduce license incompatibilities.
No new license
> Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
Understood.
> The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
There are no new dependencies/features required.
> Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary runtime libraries supplied by the platform and commonly used by other applications built for the target, but those libraries must not be required for code generation for the target; cross-compilation to the target must not require such libraries at all. For instance, rustc built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
As previously said it's using open source tools only.
> "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are not limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
There are no such terms present/
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
I'm not the reviewer here.
> This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
I'm not the reviewer here.
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
It supports for std
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
I have added the documentation, and I think it's clear.
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
Understood.
> Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
Understood.
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
I believe I didn't break any other target.
> In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
I think there are no such problems in this PR.
When encountering code like
```rust
fn foo() -> i32 {
match 0 {
1 => return 0,
2 => "",
_ => 1,
}
}
```
Point at the return type and not at the prior arm, as that arm has type
`!` which isn't influencing the arm corresponding to arm `2`.
Fix#78124.
