The makefiles and `mklldeps.py` called `llvm-config --shared-mode` to
find out if LLVM defaulted to shared or static libraries, and just went
with that. But under rustbuild, `librustc_llvm/build.rs` was assuming
that LLVM should be static, and even forcing `--link-static` for 3.9+.
Now that build script also uses `--shared-mode` to learn the default,
which should work better for pre-3.9 configured for dynamic linking, as
it wasn't possible back then to choose differently via `llvm-config`.
Further, the configure script now has a new `--enable-llvm-link-shared`
option, which allows one to manually override `--link-shared` on 3.9+
instead of forcing static.
Fix grammar verification
* Use make check-lexer to verify the grammar.
* Extend grammar/README
* Add make clean-grammar rule
* Add target check-build-lexer-verifier to make tidy, so it will build the verifier with every build and catch future errors
This is the continuation of #34994
r? @steveklabnik @jonathandturner @alexcrichton
to actually use the AAPCS calling convention
closes#37810
This is technically a [breaking-change] because it changes the ABI of
`extern "aapcs"` functions that (a) involve `f32`/`f64` arguments/return
values and (b) are compiled for arm-eabihf targets from
"aapcs-vfp" (wrong) to "aapcs" (correct).
Appendix:
What these ABIs mean?
- In the "aapcs-vfp" ABI or "hard float" calling convention: Floating
point values are passed/returned through FPU registers (s0, s1, d0, etc.)
- Whereas, in the "aapcs" ABI or "soft float" calling convention:
Floating point values are passed/returned through general purpose
registers (r0, r1, etc.)
Mixing these ABIs can cause problems if the caller assumes that the
routine is using one of these ABIs but it's actually using the other
one.
* Use `make check-lexer` to verify the grammar.
* Extend grammar/README
* Add make clean-grammar rule
* Add target `check-build-lexer-verifier` to `make tidy`, so it will build the verifier with every build and catch future errors
* Search for antlr4 with configure and find
This allows you to enable *all* nested visits in a future-compatible
sort of way. Moreover, if you choose to override the `visit_nested`
methods yourself, you can "future-proof" against omissions by overriding
`nested_visit_map` to panic.
This helps with incr. comp. because otherwise the Collect(Impl) check
winds up touching all of the impl items; since Collect(Impl) also
produces the types for the impl header, this creates a polluted graph
where the impl types depend on the impl items.
This commit does not change how the incremental accounting is done, so
changes (or accessses) to an impl-item are still tagged to the enclosing
impl.
This commits adds the "main guts" of this change. It does not build on
its own.
rustc: Implement #[link(cfg(..))] and crt-static
This commit is an implementation of [RFC 1721] which adds a new target feature
to the compiler, `crt-static`, which can be used to select how the C runtime for
a target is linked. Most targets dynamically linke the C runtime by default with
the notable exception of some of the musl targets.
[RFC 1721]: https://github.com/rust-lang/rfcs/blob/master/text/1721-crt-static.md
This commit first adds the new target-feature, `crt-static`. If enabled, then
the `cfg(target_feature = "crt-static")` will be available. Targets like musl
will have this enabled by default. This feature can be controlled through the
standard target-feature interface, `-C target-feature=+crt-static` or
`-C target-feature=-crt-static`.
Next this adds an gated and unstable `#[link(cfg(..))]` feature to enable the
`crt-static` semantics we want with libc. The exact behavior of this attribute
is a little squishy, but it's intended to be a forever-unstable
implementation detail of the liblibc crate.
Specifically the `#[link(cfg(..))]` annotation means that the `#[link]`
directive is only active in a compilation unit if that `cfg` value is satisfied.
For example when compiling an rlib, these directives are just encoded and
ignored for dylibs, and all staticlibs are continued to be put into the rlib as
usual. When placing that rlib into a staticlib, executable, or dylib, however,
the `cfg` is evaluated *as if it were defined in the final artifact* and the
library is decided to be linked or not.
Essentially, what'll happen is:
* On MSVC with `-C target-feature=-crt-static`, the `msvcrt.lib` library will be
linked to.
* On MSVC with `-C target-feature=+crt-static`, the `libcmt.lib` library will be
linked to.
* On musl with `-C target-feature=-crt-static`, the object files in liblibc.rlib
are removed and `-lc` is passed instead.
* On musl with `-C target-feature=+crt-static`, the object files in liblibc.rlib
are used and `-lc` is not passed.
This commit does **not** include an update to the liblibc module to implement
these changes. I plan to do that just after the 1.14.0 beta release is cut to
ensure we get ample time to test this feature.
cc #37406
This commit is an implementation of [RFC 1721] which adds a new target feature
to the compiler, `crt-static`, which can be used to select how the C runtime for
a target is linked. Most targets dynamically linke the C runtime by default with
the notable exception of some of the musl targets.
[RFC 1721]: https://github.com/rust-lang/rfcs/blob/master/text/1721-crt-static.md
This commit first adds the new target-feature, `crt-static`. If enabled, then
the `cfg(target_feature = "crt-static")` will be available. Targets like musl
will have this enabled by default. This feature can be controlled through the
standard target-feature interface, `-C target-feature=+crt-static` or
`-C target-feature=-crt-static`.
Next this adds an gated and unstable `#[link(cfg(..))]` feature to enable the
`crt-static` semantics we want with libc. The exact behavior of this attribute
is a little squishy, but it's intended to be a forever-unstable
implementation detail of the liblibc crate.
Specifically the `#[link(cfg(..))]` annotation means that the `#[link]`
directive is only active in a compilation unit if that `cfg` value is satisfied.
For example when compiling an rlib, these directives are just encoded and
ignored for dylibs, and all staticlibs are continued to be put into the rlib as
usual. When placing that rlib into a staticlib, executable, or dylib, however,
the `cfg` is evaluated *as if it were defined in the final artifact* and the
library is decided to be linked or not.
Essentially, what'll happen is:
* On MSVC with `-C target-feature=-crt-static`, the `msvcrt.lib` library will be
linked to.
* On MSVC with `-C target-feature=+crt-static`, the `libcmt.lib` library will be
linked to.
* On musl with `-C target-feature=-crt-static`, the object files in liblibc.rlib
are removed and `-lc` is passed instead.
* On musl with `-C target-feature=+crt-static`, the object files in liblibc.rlib
are used and `-lc` is not passed.
This commit does **not** include an update to the liblibc module to implement
these changes. I plan to do that just after the 1.14.0 beta release is cut to
ensure we get ample time to test this feature.
cc #37406
rustdoc: Fix some local inlining issues
* Only inline public items when inlining glob imports.
* Never inline while in a private module or a child of a private module.
* Never inline impls. This allowed the removal of a workaround in the
rendering code.
Remove `scope_auxiliary`.
`scope_auxiliary` is a big part of the high memory usage in #36799. It's only used for MIR dumping. I have taken a hubristic approach: I have assumed that particular use is unimportant and removed `scope_auxiliary` and related things. This reduces peak RSS by ~10% for a cut-down version of the program in #36799.
If that assumption is wrong perhaps we can avoid building `scope_auxiliary` unless MIR dumping is enabled.
In general having all these different structs for "origins" is not
great, since equating types can cause obligations and vice-versa. I
think we should gradually collapse these things. We almost certainly
also need to invest a big more energy into the `error_reporting` code to
rationalize it: this PR does kind of the minimal effort in that
direction.
Add llvm debuginfo configure option
CC @nnethercote @Mark-Simulacrum
We add a new configure option, `--enable-llvm-debuginfo`, to do exactly what you'd think.
Re: #31033Fixes#37738
rustc: Flag all builtins functions as hidden
When compiling compiler-rt you typically compile with `-fvisibility=hidden`
which to ensure that all symbols are hidden in shared objects and don't show up
in symbol tables. This is important for these intrinsics being linked in every
crate to ensure that we're not unnecessarily bloating the public ABI of Rust
crates.
This should help allow the compiler-builtins project with Rust-defined builtins
start landing in-tree as well.
rustbuild: Tweak default rule inclusion
If a rule is flagged with `default(true)` then the pseudo-rule `default:foo`
will include that. If a rule is also flagged with `.host(true)`, however, then
the rule shouldn't be included for targets that aren't in the host array. This
adds a filter to ensure we don't pull in host rules for targets by accident.
test: Move missing-items to a ui test
This test is failing on nightly for unknown reasons, and my best guess is a
difference in grep versions which is interpreting symbols differently. For now
let's just move this to a ui test and hope it fixes nightlies.
If a rule is flagged with `default(true)` then the pseudo-rule `default:foo`
will include that. If a rule is also flagged with `.host(true)`, however, then
the rule shouldn't be included for targets that aren't in the host array. This
adds a filter to ensure we don't pull in host rules for targets by accident.
Restore Vec::from_iter() specialization
Since I said "no intentional functional change" in the previous commit,
I guess it was inevitable there were unintentional changes. Not
functional, but optimization-wise. This restores the extend
specialization's use in Vec::from_iter. (commit 1).
Also use specialization in from_iter to reduce allocation code duplication
for the TrustedLen case (commit 2).
Bug introduced in PR #37709
* Only inline public items when inlining glob imports.
* Never inline while in a private module or a child of a private module.
* Never inline impls. This allowed the removal of a workaround in the
rendering code.
