These `where` clauses are accepted everywhere generics are currently
accepted and desugar during type collection to the type parameter bounds
we have today.
A new keyword, `where`, has been added. Therefore, this is a breaking
change. Change uses of `where` to other identifiers.
[breaking-change]
I chose to make two of them because I wanted something close to an
"end-to-end" test (*), but at the same time I wanted a test that
would run on Windows (**).
(*) The run-make test serves as the end-to-end: It constructs an input
that is trying to subvert the hack and we are going to check that it
fails in the attempt).
(**) The compile-fail-fulldeps test serves as a more narrow test that
will be tested on all platforms. It also attempts to subvert the
hack, testing that when you use `new_parser_from_tts`, the resulting
parser does not support reading embedded Idents.
This leaves the `Share` trait at `std::kinds` via a `#[deprecated]` `pub use`
statement, but the `NoShare` struct is no longer part of `std::kinds::marker`
due to #12660 (the build cannot bootstrap otherwise).
All code referencing the `Share` trait should now reference the `Sync` trait,
and all code referencing the `NoShare` type should now reference the `NoSync`
type. The functionality and meaning of this trait have not changed, only the
naming.
Closes#16281
[breaking-change]
Closes#16097 (fix variable name in tutorial)
Closes#16100 (More defailbloating)
Closes#16104 (Fix deprecation commment on `core::cmp::lexical_ordering`)
Closes#16105 (fix formatting in pointer guide table)
Closes#16107 (remove serialize::ebml, add librbml)
Closes#16108 (Fix heading levels in pointer guide)
Closes#16109 (rustrt: Don't conditionally init the at_exit QUEUE)
Closes#16111 (hexfloat: Deprecate to move out of the repo)
Closes#16113 (Add examples for GenericPath methods.)
Closes#16115 (Byte literals!)
Closes#16116 (Add a non-regression test for issue #8372)
Closes#16120 (Deprecate semver)
Closes#16124 (Deprecate uuid)
Closes#16126 (Deprecate fourcc)
Closes#16127 (Remove incorrect example)
Closes#16129 (Add note about production deployments.)
Closes#16131 (librustc: Don't ICE when trying to subst regions in destructor call.)
Closes#16133 (librustc: Don't ICE with struct exprs where the name is not a valid struct.)
Closes#16136 (Implement slice::Vector for Option<T> and CVec<T>)
Closes#16137 (alloc, arena, test, url, uuid: Elide lifetimes.)
This implements RFC 39. Omitted lifetimes in return values will now be
inferred to more useful defaults, and an error is reported if a lifetime
in a return type is omitted and one of the two lifetime elision rules
does not specify what it should be.
This primarily breaks two uncommon code patterns. The first is this:
unsafe fn get_foo_out_of_thin_air() -> &Foo {
...
}
This should be changed to:
unsafe fn get_foo_out_of_thin_air() -> &'static Foo {
...
}
The second pattern that needs to be changed is this:
enum MaybeBorrowed<'a> {
Borrowed(&'a str),
Owned(String),
}
fn foo() -> MaybeBorrowed {
Owned(format!("hello world"))
}
Change code like this to:
enum MaybeBorrowed<'a> {
Borrowed(&'a str),
Owned(String),
}
fn foo() -> MaybeBorrowed<'static> {
Owned(format!("hello world"))
}
Closes#15552.
[breaking-change]
Importing from types was disallowed in #6462. Flag was set for paths whether it is a module or a type. Type flag was set when impl was seen. The problem is, for cross-crate situations, when reexport is involved, it is possible that impl is seen too late because metadata is loaded lazily.
Fix#15664.
This small patch causes the stability lint to bail out when traversing
any AST produced via a macro expansion. Ultimately, we would like to
lint the contents of the macro at the place where the macro is defined,
but regardless we should not be linting it at the use site.
Closes#15703
This will break code that used the old `Index` trait. Change this code
to use the new `Index` traits. For reference, here are their signatures:
pub trait Index<Index,Result> {
fn index<'a>(&'a self, index: &Index) -> &'a Result;
}
pub trait IndexMut<Index,Result> {
fn index_mut<'a>(&'a mut self, index: &Index) -> &'a mut Result;
}
Closes#6515.
[breaking-change]
r? @nick29581
This will break code that used the old `Index` trait. Change this code
to use the new `Index` traits. For reference, here are their signatures:
pub trait Index<Index,Result> {
fn index<'a>(&'a self, index: &Index) -> &'a Result;
}
pub trait IndexMut<Index,Result> {
fn index_mut<'a>(&'a mut self, index: &Index) -> &'a mut Result;
}
Closes#6515.
[breaking-change]
floating point numbers for real.
This will break code that looks like:
let mut x = 0;
while ... {
x += 1;
}
println!("{}", x);
Change that code to:
let mut x = 0i;
while ... {
x += 1;
}
println!("{}", x);
Closes#15201.
[breaking-change]
This breaks a fair amount of code. The typical patterns are:
* `for _ in range(0, 10)`: change to `for _ in range(0u, 10)`;
* `println!("{}", 3)`: change to `println!("{}", 3i)`;
* `[1, 2, 3].len()`: change to `[1i, 2, 3].len()`.
RFC #30. Closes#6023.
[breaking-change]
If you define lang items in your crate, add `#[feature(lang_items)]`.
If you define intrinsics (`extern "rust-intrinsic"`), add
`#[feature(intrinsics)]`.
Closes#12858.
[breaking-change]
This commit makes several changes to the stability index infrastructure:
* Stability levels are now inherited lexically, i.e., each item's
stability level becomes the default for any nested items.
* The computed stability level for an item is stored as part of the
metadata. When using an item from an external crate, this data is
looked up and cached.
* The stability lint works from the computed stability level, rather
than manual stability attribute annotations. However, the lint still
checks only a limited set of item uses (e.g., it does not check every
component of a path on import). This will be addressed in a later PR,
as part of issue #8962.
* The stability lint only applies to items originating from external
crates, since the stability index is intended as a promise to
downstream crates.
* The "experimental" lint is now _allow_ by default. This is because
almost all existing crates have been marked "experimental", pending
library stabilization. With inheritance in place, this would generate
a massive explosion of warnings for every Rust program.
The lint should be changed back to deny-by-default after library
stabilization is complete.
* The "deprecated" lint still warns by default.
The net result: we can begin tracking stability index for the standard
libraries as we stabilize, without impacting most clients.
Closes#13540.
Closes#8142.
This is not the semantics we want long-term. You can continue to use
`#[unsafe_destructor]`, but you'll need to add
`#![feature(unsafe_destructor)]` to the crate attributes.
[breaking-change]
This commit makes several changes to the stability index infrastructure:
* Stability levels are now inherited lexically, i.e., each item's
stability level becomes the default for any nested items.
* The computed stability level for an item is stored as part of the
metadata. When using an item from an external crate, this data is
looked up and cached.
* The stability lint works from the computed stability level, rather
than manual stability attribute annotations. However, the lint still
checks only a limited set of item uses (e.g., it does not check every
component of a path on import). This will be addressed in a later PR,
as part of issue #8962.
* The stability lint only applies to items originating from external
crates, since the stability index is intended as a promise to
downstream crates.
* The "experimental" lint is now _allow_ by default. This is because
almost all existing crates have been marked "experimental", pending
library stabilization. With inheritance in place, this would generate
a massive explosion of warnings for every Rust program.
The lint should be changed back to deny-by-default after library
stabilization is complete.
* The "deprecated" lint still warns by default.
The net result: we can begin tracking stability index for the standard
libraries as we stabilize, without impacting most clients.
Closes#13540.
This test was added long time ago and marked as ignored.
The same test was added later in #8485 as run-fail/issue-3907.rs,
but the old one was not deleted.
`#[inline(never)]` is used.
Closes#8958.
This can break some code that relied on the addresses of statics
being distinct; add `#[inline(never)]` to the affected statics.
[breaking-change]
This removes all remnants of `@` pointers from rustc. Additionally, this removes
the `GC` structure from the prelude as it seems odd exporting an experimental
type in the prelude by default.
Closes#14193
[breaking-change]
RFC #27.
After a snapshot, the old syntax will be removed.
This can break some code that looked like `foo as &Trait:Send`. Now you
will need to write `foo as (&Trait+Send)`.
Closes#12778.
[breaking-change]
With this change, rustc creates a unique type identifier for types in debuginfo. These type identifiers are used by LLVM to correctly handle link-time-optimization scenarios but also help rustc with dealing with inlining from other crates. For more information, see the documentation block at the top of librustc/middle/trans/debuginfo.rs.
Fixes#13681.
This is part of the ongoing renaming of the equality traits. See #12517 for more
details. All code using Eq/Ord will temporarily need to move to Partial{Eq,Ord}
or the Total{Eq,Ord} traits. The Total traits will soon be renamed to {Eq,Ord}.
cc #12517
[breaking-change]
This commit moves reflection (as well as the {:?} format modifier) to a new
libdebug crate, all of which is marked experimental.
This is a breaking change because it now requires the debug crate to be
explicitly linked if the :? format qualifier is used. This means that any code
using this feature will have to add `extern crate debug;` to the top of the
crate. Any code relying on reflection will also need to do this.
Closes#12019
[breaking-change]
This ensures that a public typedef to a private item is ensured to be public in
terms of linkage. This affects both the visibility of the library's symbols as
well as other lints based on privacy (dead_code for example).
Closes#14421Closes#14422
This commit is part of the ongoing libstd facade efforts (cc #13851). The
compiler now recognizes some language items as "extern { fn foo(...); }" and
will automatically perform the following actions:
1. The foreign function has a pre-defined name.
2. The crate and downstream crates can only be built as rlibs until a crate
defines the lang item itself.
3. The actual lang item has a pre-defined name.
This is essentially nicer compiler support for the hokey
core-depends-on-std-failure scheme today, but it is implemented the same way.
The details are a little more hidden under the covers.
In addition to failure, this commit promotes the eh_personality and
rust_stack_exhausted functions to official lang items. The compiler can generate
calls to these functions, causing linkage errors if they are left undefined. The
checking for these items is not as precise as it could be. Crates compiling with
`-Z no-landing-pads` will not need the eh_personality lang item, and crates
compiling with no split stacks won't need the stack exhausted lang item. For
ease, however, these items are checked for presence in all final outputs of the
compiler.
It is quite easy to define dummy versions of the functions necessary:
#[lang = "stack_exhausted"]
extern fn stack_exhausted() { /* ... */ }
#[lang = "eh_personality"]
extern fn eh_personality() { /* ... */ }
cc #11922, rust_stack_exhausted is now a lang item
cc #13851, libcollections is blocked on eh_personality becoming weak
1. Wherever the `buf` field of a `Formatter` was used, the `Formatter` is used
instead.
2. The usage of `write_fmt` is minimized as much as possible, the `write!` macro
is preferred wherever possible.
3. Usage of `fmt::write` is minimized, favoring the `write!` macro instead.
## Process API
The existing APIs for spawning processes took strings for the command
and arguments, but the underlying system may not impose utf8 encoding,
so this is overly limiting.
The assumption we actually want to make is just that the command and
arguments are viewable as [u8] slices with no interior NULLs, i.e., as
CStrings. The ToCStr trait is a handy bound for types that meet this
requirement (such as &str and Path).
However, since the commands and arguments are often a mixture of
strings and paths, it would be inconvenient to take a slice with a
single T: ToCStr bound. So this patch revamps the process creation API
to instead use a builder-style interface, called `Command`, allowing
arguments to be added one at a time with differing ToCStr
implementations for each.
The initial cut of the builder API has some drawbacks that can be
addressed once issue #13851 (libstd as a facade) is closed. These are
detailed as FIXMEs.
## Dynamic library API
`std::unstable::dynamic_library::open_external` currently takes a
`Path`, but because `Paths` produce normalized strings, this can
change the semantics of lookups in a given environment. This patch
generalizes the function to take a `ToCStr`-bounded type, which
includes both `Path`s and `str`s.
## ToCStr API
Adds ToCStr impl for &Path and ~str. This is a stopgap until DST (#12938) lands.
Until DST lands, we cannot decompose &str into & and str, so we cannot
usefully take ToCStr arguments by reference (without forcing an
additional & around &str). So we are instead temporarily adding an
instance for &Path and ~str, so that we can take ToCStr as owned. When
DST lands, the &Path instance should be removed, the string instances
should be revisted, and arguments bound by ToCStr should be passed by
reference.
FIXMEs have been added accordingly.
## Tickets closed
Closes#11650.
Closes#7928.
(Only after adding the tests did I realize that this is not really a
special case at the AST level; as far as the visitor is concerned,
`int` and `i32` and `i64` are just idents.)
Namely: non-pub `use` declarations *are* significant to the SVH
computation, since they can change which traits are part of the method
resolution step, and thus affect which methods get called from the
(potentially inlined) code.
