Improve diagnostics for `const a: = expr;`
Adds a suggestion to write a type when there is a colon, but the type is not present.
I've also shrunk spans a little, so the suggestions are a little nicer.
Resolves#100146
r? `@compiler-errors`
Use Parser's `restrictions` instead of `let_expr_allowed`
This also means that the `ALLOW_LET` flag is reset properly for subexpressions, so we can properly deny things like `a && (b && let c = d)`. Also the parser is a tiny bit smaller now.
It doesn't reject _all_ bad `let` expr usages, just a bit more.
cc `@c410-f3r`
From 72 bytes to 12 bytes (on x86-64).
There are two parts to this:
- Changing various source code offsets from 64-bit to 32-bit. This is
not a problem because the rest of rustc also uses 32-bit source code
offsets. This means `Token` is no longer `Copy` but this causes no
problems.
- Removing the `RawStrError` from `LiteralKind`. Raw string literal
invalidity is now indicated by a `None` value within
`RawStr`/`RawByteStr`, and the new `validate_raw_str` function can be
used to re-lex an invalid raw string literal to get the `RawStrError`.
There is one very small change in behaviour. Previously, if a raw string
literal matched both the `InvalidStarter` and `TooManyHashes` cases,
the latter would override the former. This has now changed, because
`raw_double_quoted_string` now uses `?` and so returns immediately upon
detecting the `InvalidStarter` case. I think this is a slight
improvement to report the earlier-detected error, and it explains the
change in the `test_too_many_hashes` test.
The commit also removes a couple of comments that refer to #77629 and
say that the size of these types don't affect performance. These
comments are wrong, though the performance effect is small.
Rollup of 5 pull requests
Successful merges:
- #99311 (change maybe_body_owned_by to take local def id)
- #99862 (Improve type mismatch w/ function signatures)
- #99895 (don't call type ascription "cast")
- #99900 (remove some manual hash stable impls)
- #99903 (Add diagnostic when using public instead of pub)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Add diagnostic when using public instead of pub
Forwarding from https://github.com/rust-lang/rust/pull/99706
I accidentally broke something(??) in git and the commits in that PR are absolutely not what I did in that branch
Anyways, this is the PR for this now. Adding tests again in a minute.
cc `@davidtwco`
Remove `TreeAndSpacing`.
A `TokenStream` contains a `Lrc<Vec<(TokenTree, Spacing)>>`. But this is
not quite right. `Spacing` makes sense for `TokenTree::Token`, but does
not make sense for `TokenTree::Delimited`, because a
`TokenTree::Delimited` cannot be joined with another `TokenTree`.
This commit fixes this problem, by adding `Spacing` to `TokenTree::Token`,
changing `TokenStream` to contain a `Lrc<Vec<TokenTree>>`, and removing the
`TreeAndSpacing` typedef.
The commit removes these two impls:
- `impl From<TokenTree> for TokenStream`
- `impl From<TokenTree> for TreeAndSpacing`
These were useful, but also resulted in code with many `.into()` calls
that was hard to read, particularly for anyone not highly familiar with
the relevant types. This commit makes some other changes to compensate:
- `TokenTree::token()` becomes `TokenTree::token_{alone,joint}()`.
- `TokenStream::token_{alone,joint}()` are added.
- `TokenStream::delimited` is added.
This results in things like this:
```rust
TokenTree::token(token::Semi, stmt.span).into()
```
changing to this:
```rust
TokenStream::token_alone(token::Semi, stmt.span)
```
This makes the type of the result, and its spacing, clearer.
These changes also simplifies `Cursor` and `CursorRef`, because they no longer
need to distinguish between `next` and `next_with_spacing`.
r? `@petrochenkov`
A `TokenStream` contains a `Lrc<Vec<(TokenTree, Spacing)>>`. But this is
not quite right. `Spacing` makes sense for `TokenTree::Token`, but does
not make sense for `TokenTree::Delimited`, because a
`TokenTree::Delimited` cannot be joined with another `TokenTree`.
This commit fixes this problem, by adding `Spacing` to `TokenTree::Token`,
changing `TokenStream` to contain a `Lrc<Vec<TokenTree>>`, and removing the
`TreeAndSpacing` typedef.
The commit removes these two impls:
- `impl From<TokenTree> for TokenStream`
- `impl From<TokenTree> for TreeAndSpacing`
These were useful, but also resulted in code with many `.into()` calls
that was hard to read, particularly for anyone not highly familiar with
the relevant types. This commit makes some other changes to compensate:
- `TokenTree::token()` becomes `TokenTree::token_{alone,joint}()`.
- `TokenStream::token_{alone,joint}()` are added.
- `TokenStream::delimited` is added.
This results in things like this:
```rust
TokenTree::token(token::Semi, stmt.span).into()
```
changing to this:
```rust
TokenStream::token_alone(token::Semi, stmt.span)
```
This makes the type of the result, and its spacing, clearer.
These changes also simplifies `Cursor` and `CursorRef`, because they no longer
need to distinguish between `next` and `next_with_spacing`.
This commit updates the source_file_to_parser and the
maybe_source_file_to_parse function's doc comments which currently
refer to a config parameter. The doc comments have been updated to
refer to the 'session' parameter similar to the doc comment for
try_file_to_source_file, which also takes a &Session parameter.
Implement `for<>` lifetime binder for closures
This PR implements RFC 3216 ([TI](https://github.com/rust-lang/rust/issues/97362)) and allows code like the following:
```rust
let _f = for<'a, 'b> |a: &'a A, b: &'b B| -> &'b C { b.c(a) };
// ^^^^^^^^^^^--- new!
```
cc ``@Aaron1011`` ``@cjgillot``
diagnostics: error messages when struct literals fail to parse
If an expression is supplied where a field is expected, the parser can become convinced that it's a shorthand field syntax when it's not.
This PR addresses it by explicitly recording the permitted `:` token immediately after the identifier, and also adds a suggestion to insert the name of the field if it looks like a complex expression.
Fixes#98917
Fix last `let_chains` blocker
In order to forbid things like `let x = (let y = 1);` or `if let a = 1 && { let x = let y = 1; } {}`, the parser **HAS** to know the context of `let`.
This context thing is not a surprise in the parser because you can see **a lot** of ad hoc fixes mixing parsing logic with validation logic creating code that looks more like spaghetti with tomato sauce.
To make things even greater, a new ad hoc fix was added to only allow `let`s in a valid `let_chains` context by checking the previously processed token. This was the only solution I could think of and believe me, I thought about it for a long time 👍
In the long term, it should be preferable to segregate different responsibilities or create a more robust and cleaner parser framework.
cc https://github.com/rust-lang/rust/pull/94927
cc https://github.com/rust-lang/rust/issues/53667
Use less string interning
This removes string interning in a couple of places where doing so won't result in perf improvements. I also switched one place to use pre-interned symbols.
Avoid some `&str` to `String` conversions with `MultiSpan::push_span_label`
This patch removes some`&str` to `String` conversions with `MultiSpan::push_span_label`.
The `rustc_lint_diagnostics` attribute is used by the diagnostic
translation/struct migration lints to identify calls where
non-translatable diagnostics or diagnostics outwith impls are being
created. Any function used in creating a diagnostic should be annotated
with this attribute so this commit adds the attribute to many more
functions.
Signed-off-by: David Wood <david.wood@huawei.com>
macros: use typed identifiers in diag and subdiag derive
Using typed identifiers instead of strings with the Fluent identifiers in the diagnostic and subdiagnostic derives - this enables the diagnostic derive to benefit from the compile-time validation that comes with typed identifiers, namely that use of a non-existent Fluent identifier will not compile.
r? `````@oli-obk`````
As in the diagnostic derive, using typed identifiers in the
subdiagnostic derive improves the diagnostics of using the subdiagnostic
derive as Fluent messages will be confirmed to exist at compile-time.
Signed-off-by: David Wood <david.wood@huawei.com>
Using typed identifiers instead of strings with the Fluent identifier
enables the diagnostic derive to benefit from the compile-time
validation that comes with typed identifiers - use of a non-existent
Fluent identifier will not compile.
Signed-off-by: David Wood <david.wood@huawei.com>
Fix pretty printing of empty bound lists in where-clause
Repro:
```rust
macro_rules! assert_item_stringify {
($item:item $expected:literal) => {
assert_eq!(stringify!($item), $expected);
};
}
fn main() {
assert_item_stringify! {
fn f<'a, T>() where 'a:, T: {}
"fn f<'a, T>() where 'a:, T: {}"
}
}
```
Previously this assertion would fail because rustc renders the where-clause as `where 'a, T` which is invalid syntax.
This PR makes the above assertion pass.
This bug also affects `-Zunpretty=expanded`. The intention is for that to emit syntactically valid code, but the buggy output is not valid Rust syntax.
```console
$ rustc <(echo "fn f<'a, T>() where 'a:, T: {}") -Zunpretty=expanded
#![feature(prelude_import)]
#![no_std]
#[prelude_import]
use ::std::prelude::rust_2015::*;
#[macro_use]
extern crate std;
fn f<'a, T>() where 'a, T {}
```
```console
$ rustc <(echo "fn f<'a, T>() where 'a:, T: {}") -Zunpretty=expanded | rustc -
error: expected `:`, found `,`
--> <anon>:7:23
|
7 | fn f<'a, T>() where 'a, T {}
| ^ expected `:`
```
