The task of the macro is simple enough that a decl macro is almost ten
times shorter than the original proc macro. The proc macro is 159 lines
while the decl macro is just 18 lines.
This reduces the amount of dependencies of rustbuild from 45 to 37. It
also slight reduces compilation time from 47s to 44s for debug builds.
Store liveness in interval sets for region inference
On the 100,000 line test case from https://github.com/rust-lang/rust/issues/90445, this reduces memory usage from 35 GB to 444 MB at peak (based on DHAT results, though with regular malloc), and yields a 9.4x speedup, with wall time going from 14.5 seconds to 1.5s. Performance results show that for the majority of real-world code this has little to no impact, but it's expected to generally scale better for auto-generated functions and other cases which stress this area of the compiler, as results on #90445 illustrate.
There may also be further room for improvement in future PRs making use of this data structures benefits over raw bitsets (which, at some level, are a less perfect fit for representing liveness, which is almost always composed of contiguous ranges, not point locations).
Fixes#90445.
This is a compact, fast storage for variable-sized sets, typically consisting of
larger ranges. It is less efficient than a bitset if ranges are both small and
the domain size is small, but will still perform acceptably. With enormous
domain sizes and large ranges, the interval set performs much better, as it can
be much more densely packed in memory than the uncompressed bit set alternative.
Update chalk to 0.75.0
- Compute flags in `intern_ty`
- Remove `tracing-serde` from `PERMITTED_DEPENDENCIES`
- Bump `tracing-tree` to 0.2.0
- Bump `tracing-subscriber` to 0.3.3
Stabilize asm! and global_asm!
Tracking issue: #72016
It's been almost 2 years since the original [RFC](https://github.com/rust-lang/rfcs/pull/2850) was posted and we're finally ready to stabilize this feature!
The main changes in this PR are:
- Removing `asm!` and `global_asm!` from the prelude as per the decision in #87228.
- Stabilizing the `asm` and `global_asm` features.
- Removing the unstable book pages for `asm` and `global_asm`. The contents are moved to the [reference](https://github.com/rust-lang/reference/pull/1105) and [rust by example](https://github.com/rust-lang/rust-by-example/pull/1483).
- All links to these pages have been removed to satisfy the link checker. In a later PR these will be replaced with links to the reference or rust by example.
- Removing the automatic suggestion for using `llvm_asm!` instead of `asm!` if you're still using the old syntax, since it doesn't work anymore with `asm!` no longer being in the prelude. This only affects code that predates the old LLVM-style `asm!` being renamed to `llvm_asm!`.
- Updating `stdarch` and `compiler-builtins`.
- Updating all the tests.
r? `@joshtriplett`
replace dynamic library module with libloading
This PR deletes the `rustc_metadata::dynamic_lib` module in favor of the popular and better tested [`libloading` crate](https://github.com/nagisa/rust_libloading/).
We don't benefit from `libloading`'s symbol lifetimes since we end up leaking the loaded library in all cases, but the call-sites look much nicer by improving error handling and abstracting away some transmutes. We also can remove `rustc_metadata`'s direct dependencies on `libc` and `winapi`.
This PR also adds an exception for `libloading` (and its license) to tidy, so this will need sign-off from the compiler team.
They are also removed from the prelude as per the decision in
https://github.com/rust-lang/rust/issues/87228.
stdarch and compiler-builtins are updated to work with the new, stable
asm! and global_asm! macros.
Rollup of 7 pull requests
Successful merges:
- #90709 (Only shown relevant type params in E0283 label)
- #91551 (Allow for failure of subst_normalize_erasing_regions in const_eval)
- #91570 (Evaluate inline const pat early and report error if too generic)
- #91571 (Remove unneeded access to pretty printer's `s` field in favor of deref)
- #91610 (Link to rustdoc_json_types docs instead of rustdoc-json RFC)
- #91619 (Update cargo)
- #91630 (Add missing whitespace before disabled HTML attribute)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Update cargo
8 commits in 294967c53f0c70d598fc54ca189313c86c576ea7..40dc281755137ee804bc9b3b08e782773b726e44
2021-11-29 19:04:22 +0000 to 2021-12-06 21:54:44 +0000
- Unify the description of quiet flag (rust-lang/cargo#10168)
- Stabilize future-incompat-report (rust-lang/cargo#10165)
- Support abbreviating `--release` as `-r` (rust-lang/cargo#10133)
- doc: nudge towards simple version requirements (rust-lang/cargo#10158)
- Upgrade clap to 2.34.0 (rust-lang/cargo#10164)
- Treat EOPNOTSUPP the same as ENOTSUP when ignoring failed flock calls. (rust-lang/cargo#10157)
- Add note about RUSTFLAGS removal from build scripts. (rust-lang/cargo#10141)
- Make clippy happy (rust-lang/cargo#10139)
Use object crate for .rustc metadata generation
We already use the object crate for generating uncompressed .rmeta
metadata object files. This switches the generation of compressed
.rustc object files to use the object crate as well. These have
slightly different requirements in that .rmeta should be completely
excluded from any final compilation artifacts, while .rustc should
be part of shared objects, but not loaded into memory.
The primary motivation for this change is #90326: In LLVM 14, the
current way of setting section flags (and in particular, preventing
the setting of SHF_ALLOC) will no longer work. There are other ways
we could work around this, but switching to the object crate seems
like the most elegant, as we already use it for .rmeta, and as it
makes this independent of the codegen backend. In particular, we
don't need separate handling in codegen_llvm and codegen_gcc.
codegen_cranelift should be able to reuse the implementation as
well, though I have omitted that here, as it is not based on
codegen_ssa.
This change mostly extracts the existing code for .rmeta handling
to allow using it for .rustc as well, and adjusts the codegen
infrastructure to handle the metadata object file separately: We
no longer create a backend-specific module for it, and directly
produce the compiled module instead.
This does not `fix` #90326 by itself yet, as .llvmbc will need to be
handled separately.
r? `@nagisa`
We already use the object crate for generating uncompressed .rmeta
metadata object files. This switches the generation of compressed
.rustc object files to use the object crate as well. These have
slightly different requirements in that .rmeta should be completely
excluded from any final compilation artifacts, while .rustc should
be part of shared objects, but not loaded into memory.
The primary motivation for this change is #90326: In LLVM 14, the
current way of setting section flags (and in particular, preventing
the setting of SHF_ALLOC) will no longer work. There are other ways
we could work around this, but switching to the object crate seems
like the most elegant, as we already use it for .rmeta, and as it
makes this independent of the codegen backend. In particular, we
don't need separate handling in codegen_llvm and codegen_gcc.
codegen_cranelift should be able to reuse the implementation as
well, though I have omitted that here, as it is not based on
codegen_ssa.
This change mostly extracts the existing code for .rmeta handling
to allow using it for .rustc as well, and adjust the codegen
infrastructure to handle the metadata object file separately: We
no longer create a backend-specific module for it, and directly
produce the compiled module instead.
This does not fix#90326 by itself yet, as .llvmbc will need to be
handled separately.
Update Clippy dependencies
Clippy has two outdated dependencies, where one indirect dependency has been flagged by rustsec for dropping a lifetime. See [RUSTSEC-2020-0146](https://rustsec.org/advisories/RUSTSEC-2020-0146). This PR updates these dependencies.
With previous dependency updates, it was tried to prevent duplicates in the `Cargo.lock` file of rust-lang/rust. I've tried to keep this in mind with this update.
* Dependency `semver`
* Used in `src/tools/cargo/Cargo.toml` as version `1.0.3`
* Used in `src/tools/rust-analyzer/crates/project_model/Cargo.toml` as version `1`
* Updated in Clippy from `0.11` to `1.0` (Clippy usually defines the major and minor patch version). The `Cargo.lock` file lists `1.0.3` which is one patch version behind the most recent one but prevents a duplicate with cargo's pinned version.
* Dependency `cargo_metadata`
* Used in several tools as `0.14`
* Used in `src/tools/tidy` and `src/tools/rls` as `0.12`
* Updated in Clippy from `0.12` to `0.14`
All updates to the `Cargo.lock` have been done automatically by `x.py`.
There are still some tools with these outdated dependencies. Clippy didn't require any changes, and it would be likely that the others could also be updated without any problem. Let me know if I should try to update them as well 🙃.
Keep up the good work, whoever is reading this 🦀
---
For Clippy:
changelog: none
The rustc fork of rayon integrates with Cargo's jobserver to limit the
amount of parallelism. However, rustdoc's use case is concurrent I/O,
which is not CPU-heavy, so it should be able to use mainline rayon.
See this discussion [1] for more details.
[1]: https://github.com/rust-lang/rust/issues/90227#issuecomment-952468618
Note: I chose rayon 1.3.1 so that the rayon version used elsewhere in
the workspace does not change.
Add support for artifact size profiling
This adds support for profiling artifact file sizes (incremental compilation artifacts and query cache to begin with).
Eventually we want to track this in perf.rlo so we can ensure that file sizes do not change dramatically on each pull request.
This relies on support in measureme: https://github.com/rust-lang/measureme/pull/169. Once that lands we can update this PR to not point to a git dependency.
This was worked on together with `@michaelwoerister.`
r? `@wesleywiser`
Adopt let_else across the compiler
This performs a substitution of code following the pattern:
```
let <id> = if let <pat> = ... { identity } else { ... : ! };
```
To simplify it to:
```
let <pat> = ... { identity } else { ... : ! };
```
By adopting the `let_else` feature (cc #87335).
The PR also updates the syn crate because the currently used version of the crate doesn't support `let_else` syntax yet.
Note: Generally I'm the person who *removes* usages of unstable features from the compiler, not adds more usages of them, but in this instance I think it hopefully helps the feature get stabilized sooner and in a better state. I have written a [comment](https://github.com/rust-lang/rust/issues/87335#issuecomment-944846205) on the tracking issue about my experience and what I feel could be improved before stabilization of `let_else`.
Index and hash HIR as part of lowering
Part of https://github.com/rust-lang/rust/pull/88186
~Based on https://github.com/rust-lang/rust/pull/88880 (see merge commit).~
Once HIR is lowered, it is later indexed by the `index_hir` query and hashed for `crate_hash`. This PR moves those post-processing steps to lowering itself. As a side objective, the HIR crate data structure is refactored as an `IndexVec<LocalDefId, Option<OwnerInfo<'hir>>>` where `OwnerInfo` stores all the relevant information for an HIR owner.
r? `@michaelwoerister`
cc `@petrochenkov`
The syn crate has gained support for let_else syntax in version 1.0.76,
see https://github.com/dtolnay/syn/pull/1057 .
In the three instances that use let_else, we've sent code through an
attr macro, which would create compile errors when there was no
let_else support in syn. To avoid this, we ran
`cargo +nightly update -p syn` for updating the syn crate.
Wrapper for `-Z gcc-ld=lld` to invoke rust-lld with the correct flavor
This PR adds an `lld-wrapper` tool which is installed as `ld` and `ld64` in `lib\rustlib\<host_target>\bin\gcc-ld` directory and whose sole purpose is to invoke `rust-lld` in the parent directory with the correct flavor. Lld decides which flavor to use from either the first two commandline arguments or from the name of the executable (`ld` for GNU/ld flavor, `ld64` for Darwin/Macos/ld64 flavor and so on). Symbolic links could not be used as they are not supported by rustup and on Windows.
The wrapper replaces full copies of rust-lld which added some significant bloat. On UNIXish operating systems it exec rust-lld, on Windows it spawns it as a child process.
Fixes#88869.
r? ```@Mark-Simulacrum```
cc ```@nagisa``` ```@petrochenkov``` ```@1000teslas```
The wrapper is installed as `ld` and `ld64` in the `lib\rustlib\<host_target>\bin\gcc-ld`
directory and its sole purpose is to invoke `rust-lld` in the parent directory with
the correct flavor.
Add `deref_into_dyn_supertrait` lint.
Initial implementation of #89460. Resolves#89190.
Maybe also worth a beta backport if necessary.
r? `@nikomatsakis`
Added -Z randomize-layout flag
An implementation of #77316, it currently randomly shuffles the fields of `repr(rust)` types based on their `DefPathHash`
r? ``@eddyb``
Simplify lazy DefPathHash decoding by using an on-disk hash table.
This PR simplifies the logic around mapping `DefPathHash` values encountered during incremental compilation to valid `DefId`s in the current session. It is able to do so by using an on-disk hash table encoding that allows for looking up values directly, i.e. without deserializing the entire table.
The main simplification comes from not having to keep track of `DefPathHashes` being used during the compilation session.
Use a separate interner type for UniqueTypeId
Using symbol::Interner makes it very easy to mixup UniqueTypeId symbols
with the global interner. In fact the Debug implementation of
UniqueTypeId did exactly this.
Using a separate interner type also avoids prefilling the interner with
unused symbols and allow for optimizing the symbol interner for parallel
access without negatively affecting the single threaded module codegen.
Using symbol::Interner makes it very easy to mixup UniqueTypeId symbols
with the global interner. In fact the Debug implementation of
UniqueTypeId did exactly this.
Using a separate interner type also avoids prefilling the interner with
unused symbols and allow for optimizing the symbol interner for parallel
access without negatively affecting the single threaded module codegen.
Split rustc_mir
The `rustc_mir` crate is the second largest in the compiler.
This PR splits it up into 5 crates:
- rustc_borrowck;
- rustc_const_eval;
- rustc_mir_dataflow;
- rustc_mir_transform;
- rustc_monomorphize.
Pin bootstrap checksums and add a tool to update it automatically
⚠️⚠️ This is just a proactive hardening we're performing on the build system, and it's not prompted by any known compromise. If you're aware of security issues being exploited please [check out our responsible disclosure page](https://www.rust-lang.org/policies/security). ⚠️⚠️
---
This PR aims to improve Rust's supply chain security by pinning the checksums of the bootstrap compiler downloaded by `x.py`, preventing a compromised `static.rust-lang.org` from affecting building the compiler. The checksums are stored in `src/stage0.json`, which replaces `src/stage0.txt`. This PR also adds a tool to automatically update the bootstrap compiler.
The changes in this PR were originally discussed in [Zulip](https://zulip-archive.rust-lang.org/stream/241545-t-release/topic/pinning.20stage0.20hashes.html).
## Potential attack
Before this PR, an attacker who wanted to compromise the bootstrap compiler would "just" need to:
1. Gain write access to `static.rust-lang.org`, either by compromising DNS or the underlying storage.
2. Upload compromised binaries and corresponding `.sha256` files to `static.rust-lang.org`.
There is no signature verification in `x.py` as we don't want the build system to depend on GPG. Also, since the checksums were not pinned inside the repository, they were downloaded from `static.rust-lang.org` too: this only protected from accidental changes in `static.rust-lang.org` that didn't change the `*.sha256` files. The attack would allow the attacker to compromise past and future invocations of `x.py`.
## Mitigations introduced in this PR
This PR adds pinned checksums for all the bootstrap components in `src/stage0.json` instead of downloading the checksums from `static.rust-lang.org`. This changes the attack scenario to:
1. Gain write access to `static.rust-lang.org`, either by compromising DNS or the underlying storage.
2. Upload compromised binaries to `static.rust-lang.org`.
3. Land a (reviewed) change in the `rust-lang/rust` repository changing the pinned hashes.
Even with a successful attack, existing clones of the Rust repository won't be affected, and once the attack is detected reverting the pinned hashes changes should be enough to be protected from the attack. This also enables further mitigations to be implemented in following PRs, such as verifying signatures when pinning new checksums (removing the trust on first use aspect of this PR) and adding a check in CI making sure a PR updating the checksum has not been tampered with (see the future improvements section).
## Additional changes
There are additional changes implemented in this PR to enable the mitigation:
* The `src/stage0.txt` file has been replaced with `src/stage0.json`. The reasoning for the change is that there is existing tooling to read and manipulate JSON files compared to the custom format we were using before, and the slight challenge of manually editing JSON files (no comments, no trailing commas) are not a problem thanks to the new `bump-stage0`.
* A new tool has been added to the repository, `bump-stage0`. When invoked, the tool automatically calculates which release should be used as the bootstrap compiler given the current version and channel, gathers all the relevant checksums and updates `src/stage0.json`. The tool can be invoked by running:
```
./x.py run src/tools/bump-stage0
```
* Support for downloading releases from `https://dev-static.rust-lang.org` has been removed, as it's not possible to verify checksums there (it's customary to replace existing artifacts there if a rebuild is warranted). This will require a change to the release process to avoid bumping the bootstrap compiler on beta before the stable release.
## Future improvements
* Add signature verification as part of `bump-stage0`, which would require the attacker to also obtain the release signing keys in order to successfully compromise the bootstrap compiler. This would be fine to add now, as the burden of installing the tool to verify signatures would only be placed on whoever updates the bootstrap compiler, instead of everyone compiling Rust.
* Add a check on CI that ensures the checksums in `src/stage0.json` are the expected ones. If a PR changes the stage0 file CI should also run the `bump-stage0` tool and fail if the output in CI doesn't match the committed file. This prevents the PR author from tweaking the output of the tool manually, which would otherwise be close to impossible for a human to detect.
* Automate creating the PRs bumping the bootstrap compiler, by setting up a scheduled job in GitHub Actions that runs the tool and opens a PR.
* Investigate whether a similar mitigation can be done for "download from CI" components like the prebuilt LLVM.
r? `@Mark-Simulacrum`
Warn when [T; N].into_iter() is ambiguous in the new edition.
Fixes https://github.com/rust-lang/rust/issues/88475
In https://github.com/rust-lang/rust/issues/88475, a situation was found where `[T; N].into_iter()` becomes *ambiguous* in the new edition. This is different than the case where `(&[T; N]).into_iter()` resolves differently, which was the only case handled by the `array_into_iter` lint. This is almost identical to the new-traits-in-the-prelude problem. Effectively, due to the array-into-iter hack disappearing in Rust 2021, we effectively added `IntoIterator` to the 'prelude' in Rust 2021 specifically for arrays.
This modifies the prelude collisions lint to detect that case and emit a `array_into_iter` lint in that case.
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
Update the backtrace crate in libstd
This commit updates the backtrace crate in libstd now that dependencies
have been updated to use `memchr` from the standard library as well.
This is mostly just making sure deps are up-to-date and have all the
latest-and-greatest fixes and such.
Closesrust-lang/backtrace-rs#432
This commit updates the backtrace crate in libstd now that dependencies
have been updated to use `memchr` from the standard library as well.
This is mostly just making sure deps are up-to-date and have all the
latest-and-greatest fixes and such.
Closesrust-lang/backtrace-rs#432
Unbox mutexes, condvars and rwlocks on hermit
[RustyHermit](https://github.com/hermitcore/rusty-hermit) provides now movable synchronization primitives and we are able to unbox mutexes and condvars.
Matthew's work on improving NLL's "higher-ranked subtype error"s
This PR rebases `@matthewjasper's` [branch](https://github.com/matthewjasper/rust/tree/nll-hrtb-errors) which has great work to fix the obscure higher-ranked subtype errors that are tracked in #57374.
These are a blocker to turning full NLLs on, and doing some internal cleanups to remove some of the old region code.
The goal is so `@nikomatsakis` can take a look at this early, and I'll then do my best to help do the changes and followup work to land this work, and move closer to turning off the migration mode.
I've only updated the branch and made it compile, removed a warning or two.
r? `@nikomatsakis`
(Here's the [zulip topic to discuss this](https://rust-lang.zulipchat.com/#narrow/stream/122657-t-compiler.2Fwg-nll/topic/.2357374.3A.20improving.20higher-ranked.20subtype.20errors.20via.20.2386700) that Niko wanted)
Update cargo
8 commits in b51439fd8b505d4800a257acfecf3c69f81e35cf..e96bdb0c3d0a418e7fcd7fbd69be08abf830b4bc
2021-08-09 18:40:05 +0000 to 2021-08-17 22:58:47 +0000
- Support using rustbot to ping the Windows group (rust-lang/cargo#9802)
- Show information about abnormal `fix` errors. (rust-lang/cargo#9799)
- Bump jobserver. (rust-lang/cargo#9798)
- Render build-std web links as hyperlinks (rust-lang/cargo#9795)
- Teach cargo to failfast on recursive/corecursive aliases (rust-lang/cargo#9791)
- Fix value-after-table error with profiles. (rust-lang/cargo#9789)
- Fix plugin registrar change. (rust-lang/cargo#9790)
- Ability to specify the output name for a bin target different from the crate name (rust-lang/cargo#9627)
Update `polonius-engine` to 0.13.0
This PR updates the use of `polonius-engine` to the recently released 0.13.0:
- this version renamed a lot of relations to match the current terminology
- "illegal subset relationships errors" (AKA "subset errors" or "universal region errors" in rustc parlance) have been implemented in all variants, and therefore the `Hybrid` variant can be the rustc default once again
- some of the blessed expectations were updated: new tests have been added since the last time I updated the tests, diagnostics have changed, etc.
In particular:
- a few tests had trivial expectations changes such as basic diagnostics changes for the migrate-mode and full NLLs
- others were recursion and lengths limits which emits a file, and under the polonius compare-mode, the folder has a different name
- a few tests were ignored in the NLL compare-mode for reasons that obviously also apply to Polonius
- some diagnostics were unified so that older expectations no longer made sense: the NLL and Polonius outputs were identical.
- in a few cases Polonius gets a chance to emit more errors than NLLs
A few tests in the compare-mode still are super slow and trigger the 60s warning, or OOM rustc during fact generation, and I've detailed these [on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/186049-t-compiler.2Fwg-polonius/topic/Challenges.20for.20move.2Finit.2C.20liveness.2C.20and.20.60Location.3A.3AAll.60):
- `src/test/ui/numbers-arithmetic/saturating-float-casts.rs` -> OOM during rustc fact generation
- `src/test/ui/numbers-arithmetic/num-wrapping.rs`
- `src/test/ui/issues/issue-72933-match-stack-overflow.rs`
- `src/test/ui/issues/issue-74564-if-expr-stack-overflow.rs`
- `src/test/ui/repr/repr-no-niche.rs`
In addition, 2 tests don't currently pass and I didn't want to bless them now: they deal with HRTBs and miss errors that NLLs emit. We're currently trying to see if we need chalk to deal with HRTB errors (as we thought we would have to) but during the recent sprint, we discovered that we may be able to detect some of these errors in a way that resembles subset errors:
- `ui/hrtb/hrtb-just-for-static.rs` -> 3 errors in NLL, 2 in polonius: a missing error about HRTB + needing to outlive 'static
- `ui/issues/issue-26217.rs` -> missing HRTB that makes the test compile instead of emitting an error
We'll keep talking about this at the next sprint as well.
cc `@rust-lang/wg-polonius` r? `@nikomatsakis`
Improve non_fmt_panics suggestion based on trait impls.
This improves the non_fmt_panics lint suggestions by checking first which trait (Display or Debug) are actually implemented on the type.
Fixes https://github.com/rust-lang/rust/issues/87313
Fixes https://github.com/rust-lang/rust/issues/87999
Before:
```
help: add a "{}" format string to Display the message
|
2 | panic!("{}", Some(1));
| +++++
help: or use std::panic::panic_any instead
|
2 | std::panic::panic_any(Some(1));
| ~~~~~~~~~~~~~~~~~~~~~
```
After:
```
help: add a "{:?}" format string to use the Debug implementation of `Option<i32>`
|
2 | panic!("{:?}", Some(1));
| +++++++
help: or use std::panic::panic_any instead
|
2 | std::panic::panic_any(Some(1));
| ~~~~~~~~~~~~~~~~~~~~~
```
r? `@estebank`
Uplift the invalid_atomic_ordering lint from clippy to rustc
This is mostly just a rebase of https://github.com/rust-lang/rust/pull/79654; I've copy/pasted the text from that PR below.
r? `@lcnr` since you reviewed the last one, but feel free to reassign.
---
This is an implementation of https://github.com/rust-lang/compiler-team/issues/390.
As mentioned, in general this turns an unconditional runtime panic into a (compile time) lint failure. It has no false positives, and the only false negatives I'm aware of are if `Ordering` isn't specified directly and is comes from an argument/constant/whatever.
As a result of it having no false positives, and the alternative always being strictly wrong, it's on as deny by default. This seems right.
In the [zulip stream](https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/Uplift.20the.20.60invalid_atomic_ordering.60.20lint.20from.20clippy/near/218483957) `@joshtriplett` suggested that lang team should FCP this before landing it. Perhaps libs team cares too?
---
Some notes on the code for reviewers / others below
## Changes from clippy
The code is changed from [the implementation in clippy](68cf94f6a6/clippy_lints/src/atomic_ordering.rs) in the following ways:
1. Uses `Symbols` and `rustc_diagnostic_item`s instead of string literals.
- It's possible I should have just invoked Symbol::intern for some of these instead? Seems better to use symbol, but it did require adding several.
2. The functions are moved to static methods inside the lint struct, as a way to namespace them.
- There's a lot of other code in that file — which I picked as the location for this lint because `@jyn514` told me that seemed reasonable.
3. Supports unstable AtomicU128/AtomicI128.
- I did this because it was almost easier to support them than not — not supporting them would have (ideally) required finding a way not to give them a `rustc_diagnostic_item`, which would have complicated an already big macro.
- These don't have tests since I wasn't sure if/how I should make tests conditional on whether or not the target has the atomic... This is to a certain extent an issue of 64bit atomics too, but 128-bit atomics are much less common. Regardless, the existing tests should be *more* than thorough enough here.
4. Minor changes like:
- grammar tweaks ("loads cannot have `Release` **and** `AcqRel` ordering" => "loads cannot have `Release` **or** `AcqRel` ordering")
- function renames (`match_ordering_def_path` => `matches_ordering_def_path`),
- avoiding clippy-specific helper methods that don't exist in rustc_lint and didn't seem worth adding for this case (for example `cx.struct_span_lint` vs clippy's `span_lint_and_help` helper).
## Potential issues
(This is just about the code in this PR, not conceptual issues with the lint or anything)
1. I'm not sure if I should have used a diagnostic item for `Ordering` and its variants (I couldn't figure out how really, so if I should do this some pointers would be appreciated).
- It seems possible that failing to do this might possibly mean there are more cases this lint would miss, but I don't really know how `match_def_path` works and if it has any pitfalls like that, so maybe not.
2. I *think* I deprecated the lint in clippy (CC `@flip1995` who asked to be notified about clippy changes in the future in [this comment](https://github.com/rust-lang/rust/pull/75671#issuecomment-718731659)) but I'm not sure if I need to do anything else there.
- I'm kind of hoping CI will catch if I missed anything, since `x.py test src/tools/clippy` fails with a lot of errors with and without my changes (and is probably a nonsense command regardless). Running `cargo test` from src/tools/clippy also fails with unrelated errors that seem like refactorings that didnt update clippy? So, honestly no clue.
3. I wasn't sure if the description/example I gave good. Hopefully it is. The example is less thorough than the one from clippy here: https://rust-lang.github.io/rust-clippy/master/index.html#invalid_atomic_ordering. Let me know if/how I should change it if it needs changing.
4. It pulls in the `if_chain` crate. This crate was already used in clippy, and seems like it's used elsewhere in rustc, but I'm willing to rewrite it to not use this if needed (I'd prefer not to, all things being equal).
- Deprecate clippy::invalid_atomic_ordering
- Use rustc_diagnostic_item for the orderings in the invalid_atomic_ordering lint
- Reduce code duplication
- Give up on making enum variants diagnostic items and just look for
`Ordering` instead
I ran into tons of trouble with this because apparently the change to
store HIR attrs in a side table also gave the DefIds of the
constructor instead of the variant itself. So I had to change
`matches_ordering` to also check the grandparent of the defid as well.
- Rename `atomic_ordering_x` symbols to just the name of the variant
- Fix typos in checks - there were a few places that said "may not be
Release" in the diagnostic but actually checked for SeqCst in the lint.
- Make constant items const
- Use fewer diagnostic items
- Only look at arguments after making sure the method matches
This prevents an ICE when there aren't enough arguments.
- Ignore trait methods
- Only check Ctors instead of going through `qpath_res`
The functions take values, so this couldn't ever be anything else.
- Add if_chain to allowed dependencies
- Fix grammar
- Remove unnecessary allow
STD support for the ESP-IDF framework
Dear all,
This PR is implementing libStd support for the [ESP-IDF](https://github.com/espressif/esp-idf) newlib-based framework, which is the open source SDK provided by Espressif for their MCU family (esp32, esp32s2, esp32c3 and all other forthcoming ones).
Note that this PR has a [sibling PR](https://github.com/rust-lang/libc/pull/2310) against the libc crate, which implements proper declarations for all ESP-IDF APIs which are necessary for libStd support.
# Implementation approach
The ESP-IDF framework - despite being bare metal - offers a relatively complete POSIX API based on newlib. `pthread`, BSD sockets, file descriptors, and even a small file-system VFS layer. Perhaps the only significant exception is the lack of support for processes, which is to be expected of course on bare metal.
Therefore, the libStd support is implemented as a set of (hopefully small) changes to the `sys/unix` family of modules, in the form of conditional-compilation branches based either on `target_os = "espidf"` or in a couple of cases - based on `target_env = "newlib"` (the latter was already there actually and is not part of this patch).
The PR also contains two new targets:
- `riscv32imc-esp-espidf`
- `riscv32imac-esp-espidf`
... which are essentially copies of `riscv32imc-unknown-none-elf` and `riscv32imac-unknown-none-elf`, but enriched with proper `linker`, `linker_flavor`, `families`, `os`, `env` etc. specifications so that (a) the proper conditional compilation branches in libStd are selected when compiling with these targets and (b) the correct linker is used.
Since support for atomics is a precondition for libStd, the `riscv32imc-esp-espidf` target additionally is configured in such a way, so as to emit libcalls to the `__sync*` & `__atomic*` GCC functions, which are already implemented in the ESP-IDF framework. If this modification is not acceptable, we can also live with only the `riscv32imac-esp-espidf` target as well. While the RiscV chips of Espressif lack native atomics support, the relevant instructions are transparently emulated in the ESP-IDF framework using invalid instruction trap. This modification was implemented specifically with Rust support in mind.
# Target maintainers
In case this PR eventually gets merged, you can list myself as a Target Maintainer.
More importantly, Espressif (the chip vendor) is now actively involved and [embracing](https://github.com/espressif/rust-esp32-example/blob/main/docs/rust-on-xtensa.md) all [Rust-related efforts](https://github.com/esp-rs) which were originally a community effort. In light of that, I suppose `@MabezDev` - who initiated the Rust-on-Espressif efforts back in time and who now works for Espressif won't object to being listed as a maintainer as well.
**EDIT:** I was hinted (thanks, `@Urgau)` that answering the Tier 3 policy explicitly might be helpful. Answers below.
# Tier 3 Target Policy - answers
> A proposed target or target-specific patch that substantially changes code shared with other targets (not just target-specific code) must be reviewed and approved by the appropriate team for that shared code before acceptance.
Hopefully, the changes introduced by the ESP-IDF libStd support are rather on the small side. They are completely contained within the `sys/unix` set of modules (that is, aside from the obviously necessary one-liners in the `unwind` crate and in `build.rs`).
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
`@ivmarkov`
`@MabezDev`
> Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.
The two introduced targets follow as much as possible the naming conventions of the other targets. I.e. taking the bare-metal `riscv32imac_unknown_none_elf` as a base:
* The name of the new target was derived by replacing `none` with `espidf` to designate the `target_os`.
* `_elf` was removed, as the non-bare metal targets seem not to have it
* `-newlib` was deliberately NOT added at the end, as I believe the chance of having two simultaneously active separate targets for the ESP-IDF framework with different C libraries (say, newlib vs musl) is way too small
* Finally, we replaced the middle `unknown` with `esp` which is kind of the name of the whole chipset MCU family (and abbreviation from Espressif which is too long). It will stay `esp` for all RiscV32-based MCUs of the company, as they all use the riscv32imc instruction set. By necessity however (disambiguation), it will be `esp32` or `esp32s2` or `esp32s3` for the Xtensa-based MCUs as all of these have their own variation of the Xtensa architecture. (The Xtensa targets are not part of this PR, even though they would use 1:1 the same LibStd implementation provided here, as they depend on the upstreaming of the Xtensa architecture support in LLVM; this upstreaming this is currently in progress.)
There was also a preceding discussion on the topic [here](https://github.com/espressif/rust-esp32-example/issues/14).
> Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
We are explicitly putting an `-espidf` suffix to designate that the target is *specifically* for Rust + ESP-IDF
> Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
Agreed.
> The target must not introduce license incompatibilities.
To the best of our knowledge, it doesn't.
> Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
MIT + Apache 2.0
> The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
Requirements are not changed for any other target.
> If the target supports building host tools (such as rustc or cargo), those host tools must not depend on proprietary (non-FOSS) libraries, other than ordinary runtime libraries supplied by the platform and commonly used by other binaries built for the target. For instance, rustc built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.
The targets are for bare-metal environment which is not hosting build tools or a compiler.
> Targets should not require proprietary (non-FOSS) components to link a functional binary or library.
The linker used by the targets is the GCC linker from the GCC toolchain cross-compiled for riscv. GNU GPL.
> "onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are not limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
> This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
Agreed.
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
The targets implement libStd almost in its entirety, except for the missing support for process, as this is a bare metal platform. The process `sys\unix` module is currently stubbed to return "not implemented" errors.
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running tests (even if they do not pass), the documentation must explain how to run tests for the target, using emulation if possible or dedicated hardware if necessary.
Target does not (yet) support running tests. We would gladly provide all documentation how to build for the target (where?). It is currently hosted in this [README.md](https://github.com/ivmarkov/rust-esp32-std-hello) file, but will likely be moved to the [esp-rs](https://github.com/esp-rs) organization. Since the build for the target is driven by cargo and [all other tooling is downloaded automatically during the build](https://github.com/esp-rs/esp-idf-sys/blob/master/build.rs), there is no need for extensive documentation.
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
Agreed.
> Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
Agreed.
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
To the best of our knowledge, we believe we are not breaking any other target (be it tier 1, 2 or 3).
> In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
To the best of our knowledge, we have not introduced any unconditional use of a feature that affects any other target.
> If a tier 3 target stops meeting these requirements, or the target maintainers no longer have interest or time, or the target shows no signs of activity and has not built for some time, or removing the target would improve the quality of the Rust codebase, we may post a PR to remove it; any such PR will be CCed to the target maintainers (and potentially other people who have previously worked on the target), to check potential interest in improving the situation.
Agreed.
Allow more "unknown argument" strings from linker
Some toolchains emit slightly different errors, e.g.
ppc-vle-gcc: error: unrecognized option '-no-pie'
Support -Z unpretty=thir-tree again
Currently `-Z unpretty=thir-tree` is broken after some THIR refactorings. This re-implements it, making it easier to debug THIR-related issues.
We have to do analyzes before getting the THIR, since trying to create THIR from invalid HIR can ICE. But doing those analyzes requires the THIR to be built and stolen. We work around this by creating a separate query to construct the THIR tree string representation.
Closes https://github.com/rust-lang/project-thir-unsafeck/issues/8, fixes#85552.
Merge libterm into libtest
I think it's quite clear at this point that rust won't stablize the current libterm APIs to the outside world. And its only user is libtest. The compiler doesn't use this api at all. So I'm merging the crate into libtest as a module.
This also allows me to remove 15% of the libterm code, since these APIs are dead-code now.
[debuginfo] Emit associated type bindings in trait object type names.
This PR updates debuginfo type name generation for trait objects to include associated type bindings and auto trait bounds -- so that, for example, the debuginfo type name of `&dyn Iterator<Item=Foo>` and `&dyn Iterator<Item=Bar>` don't both map to just `&dyn Iterator` anymore.
The following table shows examples of debuginfo type names before and after the PR:
| type | before | after |
|------|---------|-------|
| `&dyn Iterator<Item=u32>>` | `&dyn Iterator` | `&dyn Iterator<Item=u32>` |
| `&(dyn Iterator<Item=u32>> + Sync)` | `&dyn Iterator` | `&(dyn Iterator<Item=u32> + Sync)` |
| `&(dyn SomeTrait<bool, i8, Bar=u32>> + Send)` | `&dyn SomeTrait<bool, i8>` | `&(dyn SomeTrait<bool, i8, Bar=u32>> + Send)` |
For targets that need C++-like type names, we use `assoc$<Item,u32>` instead of `Item=u32`:
| type | before | after |
|------|---------|-------|
| `&dyn Iterator<Item=u32>>` | `ref$<dyn$<Iterator> >` | `ref$<dyn$<Iterator<assoc$<Item,u32> > > >` |
| `&(dyn Iterator<Item=u32>> + Sync)` | `ref$<dyn$<Iterator> >` | `ref$<dyn$<Iterator<assoc$<Item,u32> >,Sync> >` |
| `&(dyn SomeTrait<bool, i8, Bar=u32>> + Send)` | `ref$<dyn$<SomeTrait<bool, i8> > >` | `ref$<dyn$<SomeTrait<bool,i8,assoc$<Bar,u32> > >,Send> >` |
The PR also adds self-profiling measurements for debuginfo type name generation (re. https://github.com/rust-lang/rust/issues/86431). It looks like the compiler spends up to 0.5% of its time in that task, so the potential for optimizing it via caching seems limited.
However, the perf run also shows [the biggest regression](https://perf.rust-lang.org/detailed-query.html?commit=585e91c718b0b2c5319e1fffd0ff1e62aaf7ccc2&base_commit=b9197978a90be6f7570741eabe2da175fec75375&benchmark=tokio-webpush-simple-debug&run_name=incr-unchanged) in a test case that does not even invoke the code in question. This suggests that the length of the names we generate here can affect performance by influencing how much data the linker has to copy around.
Fixes https://github.com/rust-lang/rust/issues/86134.
Bumped to `0.1.47` to resolve missing symbols on `aarch` when linking
`cargo`. This was due to a recent change in a `cargo` dependency on
`curl` (upstream C library added code that uses the uncommon `long
double` type).
Remove unused dependencies from compiler crates
Various compiler crates have dependencies that they don't appear to use. I used some scripting to detect such dependencies, filtered them based on some manual review, and removed those that do indeed appear to be entirely unused.
Add support for OpenSSL 3.0.0
This updates the `openssl` and `openssl-sys` crates to support building
the toolchain with system libraries up to OpenSSL 3.0.0. This does not
affect the static version used via `openssl-src` in CI builds.
ref: https://github.com/sfackler/rust-openssl/pull/1264
rustc_data_structures has a dependency on crossbeam-utils but never uses
it. It appears to have originally had this dependency in order to set
the "nightly" feature; however, its other dependencies use a different
version of crossbeam-utils, so this doesn't actually affect anything.
Furthermore, in current crossbeam-utils, the "nightly" feature has
become a no-op.
This updates the `openssl` and `openssl-sys` crates to support building
the toolchain with system libraries up to OpenSSL 3.0.0. This does not
affect the static version used via `openssl-src` in CI builds.
ref: https://github.com/sfackler/rust-openssl/pull/1264
Rustfix update
This updates to rustfix 0.6.0. One of the key changes here is https://github.com/rust-lang/rustfix/pull/195 which changes rustfix to apply multi-part suggestions. One of the tests needs to updated because there are some overlapping suggestions which rustfix cannot handle. The solution is to only apply the machine-applicable suggestions to avoid the overlapping issue.
This also includes a minor change to compiletest to provide better error messages with rustfix.
Use Tera templates for rustdoc.
Replaces a format!() call in layout::render with a template
expansion. Introduces a `templates` field in SharedContext so parts
of rustdoc can share pre-rendered templates.
This currently builds in a copy of the single template available, like
with static files. However, future work can make this live-loadable with
a perma-unstable flag, to make rustdoc developers' work easier.
Part of #84419.
Demo at https://hoffman-andrews.com/rust/tera/std/string/struct.String.html.
Replaces a format!() call in layout::render with a template
expansion. Introduces a `templates` field in SharedContext so parts
of rustdoc can share pre-rendered templates.
This currently builds in a copy of the single template available, like
with static files. However, future work can make this live-loadable with
a perma-unstable flag, to make rustdoc developers' work easier.
Lazify is_really_default condition in the RustdocGUI bootstrap step
The `RustdocGUI::should_run` condition spawns `npm list` several times which adds up to seconds of wall-time.
Evaluate the condition lazily to to keep `./x.py test tidy` and similar short-running tasks fast.
Fixes#86147
The `RustdocGUI::should_run` condition spawns `npm list` several times
which adds up to seconds of wall-time.
Evaluate the condition lazily to to keep `./x.py test tidy` and similar
short-running tasks fast.
rustc: Store metadata-in-rlibs in object files
This commit updates how rustc compiler metadata is stored in rlibs.
Previously metadata was stored as a raw file that has the same format as
`--emit metadata`. After this commit, however, the metadata is encoded
into a small object file which has one section which is the contents of
the metadata.
The motivation for this commit is to fix a common case where #83730
arises. The problem is that when rustc crates a `dylib` crate type it
needs to include entire rlib files into the dylib, so it passes
`--whole-archive` (or the equivalent) to the linker. The problem with
this, though, is that the linker will attempt to read all files in the
archive. If the metadata file were left as-is (today) then the linker
would generate an error saying it can't read the file. The previous
solution was to alter the rlib just before linking, creating a new
archive in a temporary directory which has the metadata file removed.
This problem from before this commit is now removed if the metadata file
is stored in an object file that the linker can read. The only caveat we
have to take care of is to ensure that the linker never actually
includes the contents of the object file into the final output. We apply
similar tricks as the `.llvmbc` bytecode sections to do this.
This involved changing the metadata loading code a bit, namely updating
some of the LLVM C APIs used to use non-deprecated ones and fiddling
with the lifetimes a bit to get everything to work out. Otherwise though
this isn't intended to be a functional change really, only that metadata
is stored differently in archives now.
This should end up fixing #83730 because by default dylibs will no
longer have their rlib dependencies "altered" meaning that
split-debuginfo will continue to have valid paths pointing at the
original rlibs. (note that we still "alter" rlibs if LTO is enabled to
remove Rust object files and we also "alter" for the #[link(cfg)]
feature, but that's rarely used).
Closes#83730
This commit updates how rustc compiler metadata is stored in rlibs.
Previously metadata was stored as a raw file that has the same format as
`--emit metadata`. After this commit, however, the metadata is encoded
into a small object file which has one section which is the contents of
the metadata.
The motivation for this commit is to fix a common case where #83730
arises. The problem is that when rustc crates a `dylib` crate type it
needs to include entire rlib files into the dylib, so it passes
`--whole-archive` (or the equivalent) to the linker. The problem with
this, though, is that the linker will attempt to read all files in the
archive. If the metadata file were left as-is (today) then the linker
would generate an error saying it can't read the file. The previous
solution was to alter the rlib just before linking, creating a new
archive in a temporary directory which has the metadata file removed.
This problem from before this commit is now removed if the metadata file
is stored in an object file that the linker can read. The only caveat we
have to take care of is to ensure that the linker never actually
includes the contents of the object file into the final output. We apply
similar tricks as the `.llvmbc` bytecode sections to do this.
This involved changing the metadata loading code a bit, namely updating
some of the LLVM C APIs used to use non-deprecated ones and fiddling
with the lifetimes a bit to get everything to work out. Otherwise though
this isn't intended to be a functional change really, only that metadata
is stored differently in archives now.
This should end up fixing #83730 because by default dylibs will no
longer have their rlib dependencies "altered" meaning that
split-debuginfo will continue to have valid paths pointing at the
original rlibs. (note that we still "alter" rlibs if LTO is enabled to
remove Rust object files and we also "alter" for the #[link(cfg)]
feature, but that's rarely used).
Closes#83730
Support Android ndk versions `r23-beta3` and up
Since android ndk version `r23-beta3`, `libgcc` has been replaced with `libunwind`. This moves the linking of `libgcc`/`libunwind` into the `unwind` crate where we check if the system compiler can find `libunwind` and fall back to `libgcc` if needed.
Rollup of 8 pull requests
Successful merges:
- #85717 (Document `From` impls for cow.rs)
- #85850 (Remove unused feature gates)
- #85888 (Fix typo in internal documentation for `TrustedRandomAccess`)
- #85889 (Restoring the `num_def_ids` function in the CStore API )
- #85899 (jsondocck small cleanup)
- #85937 (Fix bad suggestions for code from proc_macro)
- #85963 (Show `::{{constructor}}` in std::any::type_name().)
- #85977 (Fix linkcheck script from getting out of sync.)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
jsondocck small cleanup
updated `shlex` (there was some fix 6db4704fca)
replaced `lazy_static` with `once_cell`
removed `serde` direct dependency (`serde_json` will pull it)
Reduce the amount of untracked state in TyCtxt
Access to untracked global state may generate instances of #84970.
The GlobalCtxt contains the lowered HIR, the resolver outputs and interners.
By wrapping the resolver inside a query, we make sure those accesses are properly tracked.
As a no_hash query, all dependent queries essentially become `eval_always`,
what they should have been from the beginning.
Don't panic when failing to initialize incremental directory.
This removes a panic when rustc fails to initialize the incremental directory. This can commonly happen on various filesystems that don't support locking (often various network filesystems). Panics can be confusing and scary, and there are already plenty of issues reporting this.
This has been panicking since 1.22 due to I think #44502 which was a major rework of how things work. Previously, things were simpler and the [`load_dep_graph`](https://github.com/rust-lang/rust/blob/1.21.0/src/librustc_incremental/persist/load.rs#L43-L65) function would emit an error and then continue on without panicking. With 1.22, [`load_dep_graph`](https://github.com/rust-lang/rust/blob/1.22.0/src/librustc_incremental/persist/load.rs#L44) was changed so that it assumes it can load the data without errors. Today, the problem is that it calls [`prepare_session_directory`](fbf1b1a719/compiler/rustc_interface/src/passes.rs (L175-L179)) and then immediately calls `garbage_collect_session_directories` which will panic since the session is `IncrCompSession::NotInitialized`.
The solution here is to have `prepare_session_directory` return an error that must be handled so that compilation stops if it fails.
Some other options:
* Ignore directory lock failures.
* Print a warning on directory lock failure, but otherwise continue with incremental enabled.
* Print a warning on directory lock failure, and disable incremental.
* Provide a different locking mechanism.
Cargo ignores lock errors if locking is not supported, so that would be a precedent for the first option. These options would require quite a bit more changes, but I'm happy to entertain any of them, as I think they all have valid justifications.
There is more discussion on the many issues where this is reported: #49773, #59224, #66513, #76251. I'm not sure if this can be considered closing any of those, though, since I think there is some value in discussing if there is a way to avoid the error altogether. But I think it would make sense to at least close all but one to consolidate them.
Update cc
Recent commits have improved `cc`'s finding of MSVC tools on Windows. In particular it should help to address these issues: #83043 and #43468
This avoids the following warning:
```
warning: trailing semicolon in macro used in expression position
--> /home/joshua/.local/lib/cargo/registry/src/github.com-1ecc6299db9ec823/log-0.4.11/src/macros.rs:152:45
|
147 | / macro_rules! debug {
148 | | (target: $target:expr, $($arg:tt)+) => (
149 | | log!(target: $target, $crate::Level::Debug, $($arg)+);
150 | | );
151 | | ($($arg:tt)+) => (
152 | | log!($crate::Level::Debug, $($arg)+);
| | ^
153 | | )
154 | | }
| |_- in this expansion of `debug!`
|
::: src/tools/rustfmt/src/modules/visitor.rs:36:23
|
36 | Err(e) => debug!("{}", e),
| --------------- in this macro invocation
|
= note: requested on the command line with `-W semicolon-in-expressions-from-macros`
= warning: this was previously accepted by the compiler but is being phased out; it will become a hard error in a future release!
= note: for more information, see issue #79813 <https://github.com/rust-lang/rust/issues/79813>
```
Use the object crate for metadata reading
This allows sharing the metadata reader between cg_llvm, cg_clif and other codegen backends.
This is not currently useful for rlib reading with cg_spirv ([rust-gpu](https://github.com/EmbarkStudios/rust-gpu/)) as it uses tar rather than ar as .rlib format, but it is useful for dylib reading required for loading proc macros. (cc `@eddyb)`
The object crate is already trusted as dependency of libstd through backtrace. As far as I know it supports reading all object file formats used by targets for which we support rust dylibs with crate metadata, but I am not certain. If this happens to not be the case, I could keep using LLVM for reading dylib metadata.
Marked as WIP for a perf run and as it is based on #83637.
Implement `x.py test src/tools/clippy --bless`
- Add clippy_dev to the rust workspace
Before, it would give an error that it wasn't either included or
excluded from the workspace:
```
error: current package believes it's in a workspace when it's not:
current: /home/joshua/rustc/src/tools/clippy/clippy_dev/Cargo.toml
workspace: /home/joshua/rustc/Cargo.toml
this may be fixable by adding `src/tools/clippy/clippy_dev` to the `workspace.members` array of the manifest located at: /home/joshua/rustc/Cargo.toml
Alternatively, to keep it out of the workspace, add the package to the `workspace.exclude` array, or add an empty `[workspace]` table to the package's manifest.
```
- Change clippy's copy of compiletest not to special-case
rust-lang/rust. Using OUT_DIR confused `clippy_dev` and it couldn't find
the test outputs. This is one of the reasons why `cargo dev bless` used
to silently do nothing (the others were that `CARGO_TARGET_DIR` and
`PROFILE` weren't set appropriately).
- Run clippy_dev on test failure
I tested this by removing a couple lines from a stderr file, and they
were correctly replaced.
- Fix clippy_dev warnings
Update grab bag
This PR slides a bunch of crate versions forward until suddenly a bunch of deps fall out of the tree!
In doing so this mostly picks up a version bump in the `redox_users` crate which makes most of the features default to optional.
crossbeam-utils 0.7 => 0.8.3 (where applicable)
https://github.com/crossbeam-rs/crossbeam/blob/master/crossbeam-utils/CHANGELOG.md
directories 3.0.1 => 3.0.2
ignore 0.4.16 => 0.4.17
tempfile 3.0.5 => tempfile 3.2
Removes constant_time_eq from deps exceptions
Removes arrayref from deps exceptions
And also removes:
- blake2b_simd
- const_fn (the package, not the feature)
- constant_time_eq
- redox_users 0.3.4
- rust-argon2
- Add clippy_dev to the rust workspace
Before, it would give an error that it wasn't either included or
excluded from the workspace:
```
error: current package believes it's in a workspace when it's not:
current: /home/joshua/rustc/src/tools/clippy/clippy_dev/Cargo.toml
workspace: /home/joshua/rustc/Cargo.toml
this may be fixable by adding `src/tools/clippy/clippy_dev` to the `workspace.members` array of the manifest located at: /home/joshua/rustc/Cargo.toml
Alternatively, to keep it out of the workspace, add the package to the `workspace.exclude` array, or add an empty `[workspace]` table to the package's manifest.
```
- Change clippy's copy of compiletest not to special-case
rust-lang/rust. Using OUT_DIR confused `clippy_dev` and it couldn't find
the test outputs. This is one of the reasons why `cargo dev bless` used
to silently do nothing (the others were that `CARGO_TARGET_DIR` and
`PROFILE` weren't set appropriately).
- Run clippy_dev on test failure
I tested this by removing a couple lines from a stderr file, and they
were correctly replaced.
- Fix clippy_dev warnings
