Add a new ABI to support cmse_nonsecure_call
This adds support for the `cmse_nonsecure_call` feature to be able to perform non-secure function call.
See the discussion on Zulip [here](https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/Support.20for.20callsite.20attributes/near/223054928).
This is a followup to #75810 which added `cmse_nonsecure_entry`. As for that PR, I assume that the changes are small enough to not have to go through a RFC but I don't mind doing one if needed 😃
I did not yet create a tracking issue, but if most of it is fine, I can create one and update the various files accordingly (they refer to the other tracking issue now).
On the Zulip chat, I believe `@jonas-schievink` volunteered to be a reviewer 💯
Add AArch64 big-endian and ILP32 targets
This PR adds 3 new AArch64 targets:
- `aarch64_be-unknown-linux-gnu`
- `aarch64-unknown-linux-gnu_ilp32`
- `aarch64_be-unknown-linux-gnu_ilp32`
It also fixes some ABI issues on big-endian ARM and AArch64.
This commit adds a new ABI to be selected via `extern
"C-cmse-nonsecure-call"` on function pointers in order for the compiler to
apply the corresponding cmse_nonsecure_call callsite attribute.
For Armv8-M targets supporting TrustZone-M, this will perform a
non-secure function call by saving, clearing and calling a non-secure
function pointer using the BLXNS instruction.
See the page on the unstable book for details.
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Don't link with --export-dynamic on wasm32-wasi
Remove --export-dynamic from the link arguments on the wasm32-wasi
target, as it emits spurious exports and increases code size.
Leave it in place for wasm32-unknown-unknown and
wasm32-unknown-emscripten. Even though it isn't a great solution
there, users are likely depending on its behavior there.
This seems right, given that conceptually bools are unsigned, but the
implications of this change may have more action at distance that I'm
not sure how to exhaustively consider.
For instance there are a number of cases where code attaches range
metadata if `scalar.is_bool()` holds. Supposedly it would no longer be
attached to the `repr(i8)` enums? Though I'm not sure why booleans are
being special-cased here in the first place...
Fixes#80556
Rollup of 10 pull requests
Successful merges:
- #79570 (rustc: Stabilize `-Zrun-dsymutil` as `-Csplit-debuginfo`)
- #79819 (Add `SEMICOLON_IN_EXPRESSIONS_FROM_MACROS` lint)
- #79991 (rustdoc: Render HRTB correctly for bare functions)
- #80215 (Use -target when linking binaries for Mac Catalyst)
- #81158 (Point to span of upvar making closure FnMut)
- #81176 (Improve safety of `LateContext::qpath_res`)
- #81287 (Split rustdoc JSON types into separately versioned crate)
- #81306 (Fuse inner iterator in FlattenCompat and improve related tests)
- #81333 (clean up some const error reporting around promoteds)
- #81459 (Fix rustdoc text selection for page titles)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
rustc: Stabilize `-Zrun-dsymutil` as `-Csplit-debuginfo`
This commit adds a new stable codegen option to rustc,
`-Csplit-debuginfo`. The old `-Zrun-dsymutil` flag is deleted and now
subsumed by this stable flag. Additionally `-Zsplit-dwarf` is also
subsumed by this flag but still requires `-Zunstable-options` to
actually activate. The `-Csplit-debuginfo` flag takes one of
three values:
* `off` - This indicates that split-debuginfo from the final artifact is
not desired. This is not supported on Windows and is the default on
Unix platforms except macOS. On macOS this means that `dsymutil` is
not executed.
* `packed` - This means that debuginfo is desired in one location
separate from the main executable. This is the default on Windows
(`*.pdb`) and macOS (`*.dSYM`). On other Unix platforms this subsumes
`-Zsplit-dwarf=single` and produces a `*.dwp` file.
* `unpacked` - This means that debuginfo will be roughly equivalent to
object files, meaning that it's throughout the build directory
rather than in one location (often the fastest for local development).
This is not the default on any platform and is not supported on Windows.
Each target can indicate its own default preference for how debuginfo is
handled. Almost all platforms default to `off` except for Windows and
macOS which default to `packed` for historical reasons.
Some equivalencies for previous unstable flags with the new flags are:
* `-Zrun-dsymutil=yes` -> `-Csplit-debuginfo=packed`
* `-Zrun-dsymutil=no` -> `-Csplit-debuginfo=unpacked`
* `-Zsplit-dwarf=single` -> `-Csplit-debuginfo=packed`
* `-Zsplit-dwarf=split` -> `-Csplit-debuginfo=unpacked`
Note that `-Csplit-debuginfo` still requires `-Zunstable-options` for
non-macOS platforms since split-dwarf support was *just* implemented in
rustc.
There's some more rationale listed on #79361, but the main gist of the
motivation for this commit is that `dsymutil` can take quite a long time
to execute in debug builds and provides little benefit. This means that
incremental compile times appear that much worse on macOS because the
compiler is constantly running `dsymutil` over every single binary it
produces during `cargo build` (even build scripts!). Ideally rustc would
switch to not running `dsymutil` by default, but that's a problem left
to get tackled another day.
Closes#79361
This commit adds a new stable codegen option to rustc,
`-Csplit-debuginfo`. The old `-Zrun-dsymutil` flag is deleted and now
subsumed by this stable flag. Additionally `-Zsplit-dwarf` is also
subsumed by this flag but still requires `-Zunstable-options` to
actually activate. The `-Csplit-debuginfo` flag takes one of
three values:
* `off` - This indicates that split-debuginfo from the final artifact is
not desired. This is not supported on Windows and is the default on
Unix platforms except macOS. On macOS this means that `dsymutil` is
not executed.
* `packed` - This means that debuginfo is desired in one location
separate from the main executable. This is the default on Windows
(`*.pdb`) and macOS (`*.dSYM`). On other Unix platforms this subsumes
`-Zsplit-dwarf=single` and produces a `*.dwp` file.
* `unpacked` - This means that debuginfo will be roughly equivalent to
object files, meaning that it's throughout the build directory
rather than in one location (often the fastest for local development).
This is not the default on any platform and is not supported on Windows.
Each target can indicate its own default preference for how debuginfo is
handled. Almost all platforms default to `off` except for Windows and
macOS which default to `packed` for historical reasons.
Some equivalencies for previous unstable flags with the new flags are:
* `-Zrun-dsymutil=yes` -> `-Csplit-debuginfo=packed`
* `-Zrun-dsymutil=no` -> `-Csplit-debuginfo=unpacked`
* `-Zsplit-dwarf=single` -> `-Csplit-debuginfo=packed`
* `-Zsplit-dwarf=split` -> `-Csplit-debuginfo=unpacked`
Note that `-Csplit-debuginfo` still requires `-Zunstable-options` for
non-macOS platforms since split-dwarf support was *just* implemented in
rustc.
There's some more rationale listed on #79361, but the main gist of the
motivation for this commit is that `dsymutil` can take quite a long time
to execute in debug builds and provides little benefit. This means that
incremental compile times appear that much worse on macOS because the
compiler is constantly running `dsymutil` over every single binary it
produces during `cargo build` (even build scripts!). Ideally rustc would
switch to not running `dsymutil` by default, but that's a problem left
to get tackled another day.
Closes#79361
Target stack-probe support configurable finely
This adds capability to configure the target's stack probe support in a
more precise manner than just on/off. In particular now we allow
choosing between always inline-asm, always call or either one of those
depending on the LLVM version.
Note that this removes the ability to turn off the generation of the
stack-probe attribute. This is valid to replace it with inline-asm for all targets because
`probe-stack="inline-asm"` will not generate any machine code on targets
that do not currently support stack probes. This makes support for stack
probes on targets that don't have any right now automatic with LLVM
upgrades in the future.
(This is valid to do based on the fact that clang unconditionally sets
this attribute when `-fstack-clash-protection` is used, AFAICT)
cc #77885
r? `@cuviper`
Abi::ScalarPair is only ever used for types that don't have a stable
layout anyway so this doesn't break any FFI. It does however reduce the
amount of special casing on the abi outside of the code responsible for
abi specific adjustments to the pass mode.
Remove --export-dynamic from the link arguments on the wasm32-wasi
target, as it emits spurious exports and increases code size.
Leave it in place for wasm32-unknown-unknown and
wasm32-unknown-emscripten. Even though it isn't a great solution
there, users are likely depending on its behavior there.
This adds capability to configure the target's stack probe support in a
more precise manner than just on/off. In particular now we allow
choosing between always inline-asm, always call or either one of those
depending on the LLVM version on a per-target basis.
Added support for i386-unknown-linux-gnu and i486-unknown-linux-gnu
Support for both can be useful when creating new firmware, boot loaders,
or embedded operating systems.
Split a func into cold/hot parts, reducing binary size
I noticed that the Size::bits function is called in many places,
and is inlined into them. On x86_64-pc-windows-msvc, this function
is inlined 527 times, and compiled separately (non-inlined) 3 times.
Each of those inlined calls contains code that panics. This commit
moves the `panic!` call into a separate function and marks that
function with `#[cold]`.
This reduces binary size by 24 KB. Not much, but it's something.
Changes like this often reduce pressure on instruction-caches,
since it reduces the amount of code that is inlined into hot code
paths. Or more precisely, it removes cold code from hot cache lines.
Use correct ABI for wasm32 by default
Introduces `wasm32-unknown-bindgen` for those wishing to use the bindgen compat abi. `wasm32-*` now uses the correct abi by default.
Fixes https://github.com/rustwasm/team/issues/291
I noticed that the Size::bits function is called in many places,
and is inlined into them. On x86_64-pc-windows-msvc, this function
is inlined 527 times, and compiled separately (non-inlined) 3 times.
Each of those inlined calls contains code that panics. This commit
moves the `panic!` call into a separate function and marks that
function with `#[cold]`.
This reduces binary size by 24 KB. By itself, that's not a substantial
reduction. However, changes like this often reduce pressure on
instruction-caches, since it reduces the amount of code that is inlined
into hot code paths. Or more precisely, it removes cold code from hot
cache lines. It also removes all conditionals from Size::bits(),
which is called in many places.
Use Symbol for inline asm register class names
This takes care of one "FIXME":
// FIXME: use direct symbol comparison for register class names
Instead of using string literals, this uses Symbol for register
class names.
This is part of work I am doing to improve how Symbol interning works.
This takes care of one "FIXME":
// FIXME: use direct symbol comparison for register class names
Instead of using string literals, this uses Symbol for register
class names.
Add wasm32 support to inline asm
There is some contention around inline asm and wasm, and I really only made this to figure out the process of hacking on rustc, but I figured as long as the code existed, it was worth uploading.
cc `@Amanieu`
It is applied exactly when the return value has an indirect pass mode.
Except for InReg on x86 fastcall, arg attrs are now only used for
optimization purposes and thus are fine to ignore.
