Found a few 404s that seemed like simple fixes:
The Result docs use old_io Writer as an example. Fix the link to old_io Writer. There's probably an effort to update the example away from a deprecated api but this was a simple fix.
rustc/plugin was pointing at the old guide and it was a broken link anyways (plugin vs plugins). Point at the book instead.
The main page of the API docs referenced c_{str,vec}. Looks like these were deleted in 25d5a3a194. Point at ffi docs instead.
This permits all coercions to be performed in casts, but adds lints to warn in those cases.
Part of this patch moves cast checking to a later stage of type checking. We acquire obligations to check casts as part of type checking where we previously checked them. Once we have type checked a function or module, then we check any cast obligations which have been acquired. That means we have more type information available to check casts (this was crucial to making coercions work properly in place of some casts), but it means that casts cannot feed input into type inference.
[breaking change]
* Adds two new lints for trivial casts and trivial numeric casts, these are warn by default, but can cause errors if you build with warnings as errors. Previously, trivial numeric casts and casts to trait objects were allowed.
* The unused casts lint has gone.
* Interactions between casting and type inference have changed in subtle ways. Two ways this might manifest are:
- You may need to 'direct' casts more with extra type information, for example, in some cases where `foo as _ as T` succeeded, you may now need to specify the type for `_`
- Casts do not influence inference of integer types. E.g., the following used to type check:
```
let x = 42;
let y = &x as *const u32;
```
Because the cast would inform inference that `x` must have type `u32`. This no longer applies and the compiler will fallback to `i32` for `x` and thus there will be a type error in the cast. The solution is to add more type information:
```
let x: u32 = 42;
let y = &x as *const u32;
```
Previously, impls for `[T; n]` were collected in the same place as impls for `[T]` and `&[T]`. This splits them out into their own primitive page in both core and std.
This commit implements [RFC 909](https://github.com/rust-lang/rfcs/pull/909):
The `std::thread_local` module is now deprecated, and its contents are
available directly in `std::thread` as `LocalKey`, `LocalKeyState`, and
`ScopedKey`.
The macros remain exactly as they were, which means little if any code
should break. Nevertheless, this is technically a:
[breaking-change]
Closes#23547
This commit:
* Introduces `std::convert`, providing an implementation of
RFC 529.
* Deprecates the `AsPath`, `AsOsStr`, and `IntoBytes` traits, all
in favor of the corresponding generic conversion traits.
Consequently, various IO APIs now take `AsRef<Path>` rather than
`AsPath`, and so on. Since the types provided by `std` implement both
traits, this should cause relatively little breakage.
* Deprecates many `from_foo` constructors in favor of `from`.
* Changes `PathBuf::new` to take no argument (creating an empty buffer,
as per convention). The previous behavior is now available as
`PathBuf::from`.
* De-stabilizes `IntoCow`. It's not clear whether we need this separate trait.
Closes#22751Closes#14433
[breaking-change]
Impls on `clean::Type::FixedVector` are now collected in the array
primitive page instead of the slice primitive page.
Also add a primitive docs for arrays to `std`.
This commit implements [RFC
909](https://github.com/rust-lang/rfcs/pull/909):
The `std::thread_local` module is now deprecated, and its contents are
available directly in `std::thread` as `LocalKey`, `LocalKeyState`, and
`ScopedKey`.
The macros remain exactly as they were, which means little if any code
should break. Nevertheless, this is technically a:
[breaking-change]
Closes#23547
This commit clarifies some of the unstable features in the `str` module by
moving them out of the blanket `core` and `collections` features.
The following methods were moved to the `str_char` feature which generally
encompasses decoding specific characters from a `str` and dealing with the
result. It is unclear if any of these methods need to be stabilized for 1.0 and
the most conservative route for now is to continue providing them but to leave
them as unstable under a more specific name.
* `is_char_boundary`
* `char_at`
* `char_range_at`
* `char_at_reverse`
* `char_range_at_reverse`
* `slice_shift_char`
The following methods were moved into the generic `unicode` feature as they are
specifically enabled by the `unicode` crate itself.
* `nfd_chars`
* `nfkd_chars`
* `nfc_chars`
* `graphemes`
* `grapheme_indices`
* `width`
Specifically, the following actions were taken:
* The `copy_memory` and `copy_nonoverlapping_memory` functions
to drop the `_memory` suffix (as it's implied by the functionality). Both
functions are now marked as `#[stable]`.
* The `set_memory` function was renamed to `write_bytes` and is now stable.
* The `zero_memory` function is now deprecated in favor of `write_bytes`
directly.
* The `Unique` pointer type is now behind its own feature gate called `unique`
to facilitate future stabilization.
* All type parameters now are `T: ?Sized` wherever possible and new clauses were
added to the `offset` functions to require that the type is sized.
[breaking-change]
This commit stabilizes `std::borrow`, making the following modifications
to catch up the API with language changes:
* It renames `BorrowFrom` to `Borrow`, as was originally intended (but
blocked for technical reasons), and reorders the parameters
accordingly.
* It moves the type parameter of `ToOwned` to an associated type. This
is somewhat less flexible, in that each borrowed type must have a
unique owned type, but leads to a significant simplification for
`Cow`. Flexibility can be regained by using newtyped slices, which is
advisable for other reasons anyway.
* It removes the owned type parameter from `Cow`, making the type much
less verbose.
* Deprecates the `is_owned` and `is_borrowed` predicates in favor of
direct matching.
The above API changes are relatively minor; the basic functionality
remains the same, and essentially the whole module is now marked
`#[stable]`.
[breaking-change]
Per [RFC 579](https://github.com/rust-lang/rfcs/pull/579), this commit
adds a new `std::process` module. This module is largely based on the
existing `std::old_io::process` module, but refactors the API to use
`OsStr` and other new standards set out by IO reform.
The existing module is not yet deprecated, to allow for the new API to
get a bit of testing before a mass migration to it.
This commit is an implementation of [RFC 807][rfc] which adds a `std::net`
module for basic neworking based on top of `std::io`. This module serves as a
replacement for the `std::old_io::net` module and networking primitives in
`old_io`.
[rfc]: fillmein
The major focus of this redesign is to cut back on the level of abstraction to
the point that each of the networking types is just a bare socket. To this end
functionality such as timeouts and cloning has been removed (although cloning
can be done through `duplicate`, it may just yield an error).
With this `net` module comes a new implementation of `SocketAddr` and `IpAddr`.
This work is entirely based on #20785 and the only changes were to alter the
in-memory representation to match the `libc`-expected variants and to move from
public fields to accessors.
This commit is an implementation of [RFC 807][rfc] which adds a `std::net`
module for basic neworking based on top of `std::io`. This module serves as a
replacement for the `std::old_io::net` module and networking primitives in
`old_io`.
[rfc]: fillmein
The major focus of this redesign is to cut back on the level of abstraction to
the point that each of the networking types is just a bare socket. To this end
functionality such as timeouts and cloning has been removed (although cloning
can be done through `duplicate`, it may just yield an error).
With this `net` module comes a new implementation of `SocketAddr` and `IpAddr`.
This work is entirely based on #20785 and the only changes were to alter the
in-memory representation to match the `libc`-expected variants and to move from
public fields to accessors.
There are a number of holes that the stability lint did not previously cover,
including:
* Types
* Bounds on type parameters on functions and impls
* Where clauses
* Imports
* Patterns (structs and enums)
These holes have all been fixed by overriding the `visit_path` function on the
AST visitor instead of a few specialized cases. This change also necessitated a
few stability changes:
* The `collections::fmt` module is now stable (it was already supposed to be).
* The `thread_local:👿:Key` type is now stable (it was already supposed to
be).
* The `std::rt::{begin_unwind, begin_unwind_fmt}` functions are now stable.
These are required via the `panic!` macro.
* The `std::old_io::stdio::{println, println_args}` functions are now stable.
These are required by the `print!` and `println!` macros.
* The `ops::{FnOnce, FnMut, Fn}` traits are now `#[stable]`. This is required to
make bounds with these traits stable. Note that manual implementations of
these traits are still gated by default, this stability only allows bounds
such as `F: FnOnce()`.
Additionally, the compiler now has special logic to ignore its own generated
`__test` module for the `--test` harness in terms of stability.
Closes#8962Closes#16360Closes#20327
[breaking-change]
This commit is an implementation of [RFC 739][rfc] which adds a new `std::fs`
module to the standard library. This module provides much of the same
functionality as `std::old_io::fs` but it has many tweaked APIs as well as uses
the new `std::path` module.
[rfc]: https://github.com/rust-lang/rfcs/pull/739
This commit is an implementation of [RFC 739][rfc] which adds a new `std::fs`
module to the standard library. This module provides much of the same
functionality as `std::old_io::fs` but it has many tweaked APIs as well as uses
the new `std::path` module.
[rfc]: https://github.com/rust-lang/rfcs/pull/739
This commit is an implementation of [RFC 576][rfc] which adds back the `std::io`
module to the standard library. No functionality in `std::old_io` has been
deprecated just yet, and the new `std::io` module is behind the same `io`
feature gate.
[rfc]: https://github.com/rust-lang/rfcs/pull/576
A good bit of functionality was copied over from `std::old_io`, but many tweaks
were required for the new method signatures. Behavior such as precisely when
buffered objects call to the underlying object may have been tweaked slightly in
the transition. All implementations were audited to use composition wherever
possible. For example the custom `pos` and `cap` cursors in `BufReader` were
removed in favor of just using `Cursor<Vec<u8>>`.
A few liberties were taken during this implementation which were not explicitly
spelled out in the RFC:
* The old `LineBufferedWriter` is now named `LineWriter`
* The internal representation of `Error` now favors OS error codes (a
0-allocation path) and contains a `Box` for extra semantic data.
* The io prelude currently reexports `Seek` as `NewSeek` to prevent conflicts
with the real prelude reexport of `old_io::Seek`
* The `chars` method was moved from `BufReadExt` to `ReadExt`.
* The `chars` iterator returns a custom error with a variant that explains that
the data was not valid UTF-8.
