Uses the same approach as https://github.com/rust-lang/rust/pull/17286 (and
subsequent changes making it more correct), where the visitor will skip any
pieces of the AST that are from "foreign code", where the spans don't line up,
indicating that that piece of code is due to a macro expansion.
If this breaks your code, read the error message to determine which feature
gate you should add to your crate, and bask in the knowledge that your code
won't mysteriously break should you try to use the 1.0 release.
Closes#18102
[breaking-change]
This commit completes the deprecation story for the in-tree serialization
library. The compiler will now emit a warning whenever it encounters
`deriving(Encodable)` or `deriving(Decodable)`, and the library itself is now
marked `#[unstable]` for when feature staging is enabled.
All users of serialization can migrate to the `rustc-serialize` crate on
crates.io which provides the exact same interface as the libserialize library
in-tree. The new deriving modes are named `RustcEncodable` and `RustcDecodable`
and require `extern crate "rustc-serialize" as rustc_serialize` at the crate
root in order to expand correctly.
To migrate all crates, add the following to your `Cargo.toml`:
[dependencies]
rustc-serialize = "0.1.1"
And then add the following to your crate root:
extern crate "rustc-serialize" as rustc_serialize;
Finally, rename `Encodable` and `Decodable` deriving modes to `RustcEncodable`
and `RustcDecodable`.
[breaking-change]
This commit completes the deprecation story for the in-tree serialization
library. The compiler will now emit a warning whenever it encounters
`deriving(Encodable)` or `deriving(Decodable)`, and the library itself is now
marked `#[unstable]` for when feature staging is enabled.
All users of serialization can migrate to the `rustc-serialize` crate on
crates.io which provides the exact same interface as the libserialize library
in-tree. The new deriving modes are named `RustcEncodable` and `RustcDecodable`
and require `extern crate "rustc-serialize" as rustc_serialize` at the crate
root in order to expand correctly.
To migrate all crates, add the following to your `Cargo.toml`:
[dependencies]
rustc-serialize = "0.1.1"
And then add the following to your crate root:
extern crate "rustc-serialize" as rustc_serialize;
Finally, rename `Encodable` and `Decodable` deriving modes to `RustcEncodable`
and `RustcDecodable`.
[breaking-change]
followed by a semicolon.
This allows code like `vec![1i, 2, 3].len();` to work.
This breaks code that uses macros as statements without putting
semicolons after them, such as:
fn main() {
...
assert!(a == b)
assert!(c == d)
println(...);
}
It also breaks code that uses macros as items without semicolons:
local_data_key!(foo)
fn main() {
println("hello world")
}
Add semicolons to fix this code. Those two examples can be fixed as
follows:
fn main() {
...
assert!(a == b);
assert!(c == d);
println(...);
}
local_data_key!(foo);
fn main() {
println("hello world")
}
RFC #378.
Closes#18635.
[breaking-change]
This change makes the compiler no longer infer whether types (structures
and enumerations) implement the `Copy` trait (and thus are implicitly
copyable). Rather, you must implement `Copy` yourself via `impl Copy for
MyType {}`.
A new warning has been added, `missing_copy_implementations`, to warn
you if a non-generic public type has been added that could have
implemented `Copy` but didn't.
For convenience, you may *temporarily* opt out of this behavior by using
`#![feature(opt_out_copy)]`. Note though that this feature gate will never be
accepted and will be removed by the time that 1.0 is released, so you should
transition your code away from using it.
This breaks code like:
#[deriving(Show)]
struct Point2D {
x: int,
y: int,
}
fn main() {
let mypoint = Point2D {
x: 1,
y: 1,
};
let otherpoint = mypoint;
println!("{}{}", mypoint, otherpoint);
}
Change this code to:
#[deriving(Show)]
struct Point2D {
x: int,
y: int,
}
impl Copy for Point2D {}
fn main() {
let mypoint = Point2D {
x: 1,
y: 1,
};
let otherpoint = mypoint;
println!("{}{}", mypoint, otherpoint);
}
This is the backwards-incompatible part of #13231.
Part of RFC #3.
[breaking-change]
This breaks code that referred to variant names in the same namespace as
their enum. Reexport the variants in the old location or alter code to
refer to the new locations:
```
pub enum Foo {
A,
B
}
fn main() {
let a = A;
}
```
=>
```
pub use self::Foo::{A, B};
pub enum Foo {
A,
B
}
fn main() {
let a = A;
}
```
or
```
pub enum Foo {
A,
B
}
fn main() {
let a = Foo::A;
}
```
[breaking-change]
https://github.com/rust-lang/rfcs/pull/221
The current terminology of "task failure" often causes problems when
writing or speaking about code. You often want to talk about the
possibility of an operation that returns a Result "failing", but cannot
because of the ambiguity with task failure. Instead, you have to speak
of "the failing case" or "when the operation does not succeed" or other
circumlocutions.
Likewise, we use a "Failure" header in rustdoc to describe when
operations may fail the task, but it would often be helpful to separate
out a section describing the "Err-producing" case.
We have been steadily moving away from task failure and toward Result as
an error-handling mechanism, so we should optimize our terminology
accordingly: Result-producing functions should be easy to describe.
To update your code, rename any call to `fail!` to `panic!` instead.
Assuming you have not created your own macro named `panic!`, this
will work on UNIX based systems:
grep -lZR 'fail!' . | xargs -0 -l sed -i -e 's/fail!/panic!/g'
You can of course also do this by hand.
[breaking-change]
Spring cleaning is here! In the Fall! This commit removes quite a large amount
of deprecated functionality from the standard libraries. I tried to ensure that
only old deprecated functionality was removed.
This is removing lots and lots of deprecated features, so this is a breaking
change. Please consult the deprecation messages of the deleted code to see how
to migrate code forward if it still needs migration.
[breaking-change]
This removes a bunch of token types. Tokens now store the original, unaltered
numeric literal (that is still checked for correctness), which is parsed into
an actual number later, as needed, when creating the AST.
This can change how syntax extensions work, but otherwise poses no visible
changes.
[breaking-change]
Adds the option -Zsave-analysis which will dump the results of syntax and type checking into CSV files. These can be interpreted by tools such as DXR to provide semantic information about Rust programs for code search, cross-reference, etc.
Authored by Nick Cameron and Peter Elmers (@pelmers; including enums, type parameters/generics).
This completes the last stage of the renaming of the comparison hierarchy of
traits. This change renames TotalEq to Eq and TotalOrd to Ord.
In the future the new Eq/Ord will be filled out with their appropriate methods,
but for now this change is purely a renaming change.
[breaking-change]
This is part of the ongoing renaming of the equality traits. See #12517 for more
details. All code using Eq/Ord will temporarily need to move to Partial{Eq,Ord}
or the Total{Eq,Ord} traits. The Total traits will soon be renamed to {Eq,Ord}.
cc #12517
[breaking-change]
When reporting "consider removing this semicolon" hint message, the
offending semicolon may come from macro call site instead of macro
itself. Using the more appropriate span makes the hint more helpful.
Closes#13428.
When reporting "consider removing this semicolon" hint message, the
offending semicolon may come from macro call site instead of macro
itself. Using the more appropriate span makes the hint more helpful.
Closes#13428.
This commit deals with the fallout of the previous change by making tuples
structs have public fields where necessary (now that the fields are private by
default).
CodeMap.span_to_* perform a lookup of a BytePos(sp.hi), which lands into the next filemap if the last byte of range denoted by Span is also the last byte of the filemap, which results in ICEs or incorrect error reports.
Example:
````
pub fn main() {
let mut num = 3;
let refe = &mut num;
*refe = 5;
println!("{}", num);
}````
(note the empty line in the beginning and the absence of newline at the end)
The above would have caused ICE when trying to report where "refe" borrow ends.
The above without an empty line in the beginning would have reported borrow end to be the first line.
Most probably, this is also responsible for (at least some occurrences of) issue #8256.
The issue is fixed by always adding a newline at the end of non-empty filemaps in case there isn't a new line there already.
Formatting via reflection has been a little questionable for some time now, and
it's a little unfortunate that one of the standard macros will silently use
reflection when you weren't expecting it. This adds small bits of code bloat to
libraries, as well as not always being necessary. In light of this information,
this commit switches assert_eq!() to using {} in the error message instead of
{:?}.
In updating existing code, there were a few error cases that I encountered:
* It's impossible to define Show for [T, ..N]. I think DST will alleviate this
because we can define Show for [T].
* A few types here and there just needed a #[deriving(Show)]
* Type parameters needed a Show bound, I often moved this to `assert!(a == b)`
* `Path` doesn't implement `Show`, so assert_eq!() cannot be used on two paths.
I don't think this is much of a regression though because {:?} on paths looks
awful (it's a byte array).
Concretely speaking, this shaved 10K off a 656K binary. Not a lot, but sometime
significant for smaller binaries.
Make bytepos_to_charpos relative to the start of the filemap rather than its previous behaviour which was to be realtive to the start of the codemap, but ignoring multi-byte chars in earlier filemaps. Rename to bytepos_to_file_charpos. Add tests for multi-byte chars.
This patch series does a couple things:
* replaces manual `Hash` implementations with `#[deriving(Hash)]`
* adds `Hash` back to `std::prelude`
* minor cleanup of whitespace and variable names.
They are still are not completely correct, since it does not handle
graphemes at all, just codepoints, but at least it handles the common
case correctly.
The calculation was previously very wrong (rather than just a little bit
wrong): it wasn't accounting for the fact that every character is 1
byte, and so multibyte characters were pretending to be zero width.
cc #8706
- `extra::json` didn't make the cut, because of `extra::json` required
dep on `extra::TreeMap`. If/when `extra::TreeMap` moves out of `extra`,
then `extra::json` could move into `serialize`
- `libextra`, `libsyntax` and `librustc` depend on the newly created
`libserialize`
- The extensions to various `extra` types like `DList`, `RingBuf`, `TreeMap`
and `TreeSet` for `Encodable`/`Decodable` were moved into the respective
modules in `extra`
- There is some trickery, evident in `src/libextra/lib.rs` where a stub
of `extra::serialize` is set up (in `src/libextra/serialize.rs`) for
use in the stage0 build, where the snapshot rustc is still making
deriving for `Encodable` and `Decodable` point at extra. Big props to
@huonw for help working out the re-export solution for this
extra: inline extra::serialize stub
fix stuff clobbered in rebase + don't reexport serialize::serialize
no more globs in libserialize
syntax: fix import of libserialize traits
librustc: fix bad imports in encoder/decoder
add serialize dep to librustdoc
fix failing run-pass tests w/ serialize dep
adjust uuid dep
more rebase de-clobbering for libserialize
fixing tests, pushing libextra dep into cfg(test)
fix doc code in extra::json
adjust index.md links to serialize and uuid library
A mutable and immutable borrow place some restrictions on what you can
with the variable until the borrow ends. This commit attempts to convey
to the user what those restrictions are. Also, if the original borrow is
a mutable borrow, the error message has been changed (more specifically,
i. "cannot borrow `x` as immutable because it is also borrowed as
mutable" and ii. "cannot borrow `x` as mutable more than once" have
been changed to "cannot borrow `x` because it is already borrowed as
mutable").
In addition, this adds a (custom) span note to communicate where the
original borrow ends.
```rust
fn main() {
match true {
true => {
let mut x = 1;
let y = &x;
let z = &mut x;
}
false => ()
}
}
test.rs:6:21: 6:27 error: cannot borrow `x` as mutable because it is already borrowed as immutable
test.rs:6 let z = &mut x;
^~~~~~
test.rs:5:21: 5:23 note: previous borrow of `x` occurs here; the immutable borrow prevents subsequent moves or mutable borrows of `x` until the borrow ends
test.rs:5 let y = &x;
^~
test.rs:7:10: 7:10 note: previous borrow ends here
test.rs:3 true => {
test.rs:4 let mut x = 1;
test.rs:5 let y = &x;
test.rs:6 let z = &mut x;
test.rs:7 }
^
```
```rust
fn foo3(t0: &mut &mut int) {
let t1 = &mut *t0;
let p: &int = &**t0;
}
fn main() {}
test.rs:3:19: 3:24 error: cannot borrow `**t0` because it is already borrowed as mutable
test.rs:3 let p: &int = &**t0;
^~~~~
test.rs:2:14: 2:22 note: previous borrow of `**t0` as mutable occurs here; the mutable borrow prevents subsequent moves, borrows, or modification of `**t0` until the borrow ends
test.rs:2 let t1 = &mut *t0;
^~~~~~~~
test.rs:4:2: 4:2 note: previous borrow ends here
test.rs:1 fn foo3(t0: &mut &mut int) {
test.rs:2 let t1 = &mut *t0;
test.rs:3 let p: &int = &**t0;
test.rs:4 }
^
```
For the "previous borrow ends here" note, if the span is too long (has too many lines), then only the first and last lines are printed, and the middle is replaced with dot dot dot:
```rust
fn foo3(t0: &mut &mut int) {
let t1 = &mut *t0;
let p: &int = &**t0;
}
fn main() {}
test.rs:3:19: 3:24 error: cannot borrow `**t0` because it is already borrowed as mutable
test.rs:3 let p: &int = &**t0;
^~~~~
test.rs:2:14: 2:22 note: previous borrow of `**t0` as mutable occurs here; the mutable borrow prevents subsequent moves, borrows, or modification of `**t0` until the borrow ends
test.rs:2 let t1 = &mut *t0;
^~~~~~~~
test.rs:7:2: 7:2 note: previous borrow ends here
test.rs:1 fn foo3(t0: &mut &mut int) {
...
test.rs:7 }
^
```
(Sidenote: the `span_end_note` currently also has issue #11715)
A mutable and immutable borrow place some restrictions on what you can
with the variable until the borrow ends. This commit attempts to convey
to the user what those restrictions are. Also, if the original borrow is
a mutable borrow, the error message has been changed (more specifically,
i. "cannot borrow `x` as immutable because it is also borrowed as
mutable" and ii. "cannot borrow `x` as mutable more than once" have
been changed to "cannot borrow `x` because it is already borrowed as
mutable").
In addition, this adds a (custom) span note to communicate where the
original borrow ends.
When --dep-info is given, rustc will write out a `$input_base.d` file in the
output directory that contains Makefile compatible dependency information for
use with tools like make and ninja.
