Detect more cases of `=` to `:` typo
When a `Local` is fully parsed, but not followed by a `;`, keep the `:` span arround and mention it. If the type could continue being parsed as an expression, suggest replacing the `:` with a `=`.
```
error: expected one of `!`, `+`, `->`, `::`, `;`, or `=`, found `.`
--> file.rs:2:32
|
2 | let _: std::env::temp_dir().join("foo");
| - ^ expected one of `!`, `+`, `->`, `::`, `;`, or `=`
| |
| while parsing the type for `_`
| help: use `=` if you meant to assign
```
Fix#119665.
When a `Local` is fully parsed, but not followed by a `;`, keep the `:` span
arround and mention it. If the type could continue being parsed as an
expression, suggest replacing the `:` with a `=`.
```
error: expected one of `!`, `+`, `->`, `::`, `;`, or `=`, found `.`
--> file.rs:2:32
|
2 | let _: std::env::temp_dir().join("foo");
| - ^ expected one of `!`, `+`, `->`, `::`, `;`, or `=`
| |
| while parsing the type for `_`
| help: use `=` if you meant to assign
```
Fix#119665.
Add an ErrorGuaranteed to ast::TyKind::Err (attempt 2)
This makes it more like `hir::TyKind::Err`, and avoids a `has_errors` assertion in `LoweringContext::lower_ty_direct`.
r? ```@oli-obk```
This mostly works well, and eliminates a couple of delayed bugs.
One annoying thing is that we should really also add an
`ErrorGuaranteed` to `proc_macro::bridge::LitKind::Err`. But that's
difficult because `proc_macro` doesn't have access to `ErrorGuaranteed`,
so we have to fake it.
`cook_lexer_literal` can emit an error about an invalid int literal but
then return a non-`Err` token. And then `integer_lit` has to account for
this to avoid printing a redundant error message.
This commit changes `cook_lexer_literal` to return `Err` in that case.
Then `integer_lit` doesn't need the special case, and
`LitError::LexerError` can be removed.
This makes it more like `hir::TyKind::Err`, and avoids a
`span_delayed_bug` call in `LoweringContext::lower_ty_direct`.
It also requires adding `ast::TyKind::Dummy`, now that
`ast::TyKind::Err` can't be used for that purpose in the absence of an
error emission.
There are a couple of cases that aren't as neat as I would have liked,
marked with `FIXME` comments.
These crates all needed specialization for `newtype_index!`, which will no
longer be necessary when the current nightly eventually becomes the next
bootstrap compiler.
Invert diagnostic lints.
That is, change `diagnostic_outside_of_impl` and `untranslatable_diagnostic` from `allow` to `deny`, because more than half of the compiler has been converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow` attributes, which proves that this change is warranted.
r? ````@davidtwco````
That is, change `diagnostic_outside_of_impl` and
`untranslatable_diagnostic` from `allow` to `deny`, because more than
half of the compiler has be converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow`
attributes, which proves that this change is warranted.
Remove unused/unnecessary features
~~The bulk of the actual code changes here is replacing try blocks with equivalent closures. I'm not entirely sure that's a good idea since it may have perf impact, happy to revert if that's the case/the change is unwanted.~~
I also removed a lot of `recursion_limit = "256"` since everything seems to build fine without that and most don't have any comment justifying it.
Don't call `walk_` functions directly if there is an equivalent `visit_` method
I was working on https://github.com/rust-lang/rust/issues/77773 and realized in one of my experiments that the `visit_path` method was not always called whereas it should have. This fixes it.
r? ``@davidtwco``
`unescape_literal` becomes `unescape_unicode`, and `unescape_c_string`
becomes `unescape_mixed`. Because rfc3349 will mean that C string
literals will no longer be the only mixed utf8 literals.
- Rename it as `MixedUnit`, because it will soon be used in more than
just C string literals.
- Change the `Byte` variant to `HighByte` and use it only for
`\x80`..`\xff` cases. This fixes the old inexactness where ASCII chars
could be encoded with either `Byte` or `Char`.
- Add useful comments.
- Remove `is_ascii`, in favour of `u8::is_ascii`.
The parser already does a check-only unescaping which catches all
errors. So the checking done in `from_token_lit` never hits.
But literals causing warnings can still occur in `from_token_lit`. So
the commit changes `str-escape.rs` to use byte string literals and C
string literals as well, to give better coverage and ensure the new
assertions in `from_token_lit` are correct.
LLVM 18 x86 data layout update
With https://reviews.llvm.org/D86310 LLVM now has i128 aligned to 16-bytes on x86 based platforms. This will be in LLVM-18. This patch updates all our spec targets to be 16-byte aligned, and removes the alignment when speaking to older LLVM.
This results in Rust overaligning things relative to LLVM on older LLVMs.
This implements MCP https://github.com/rust-lang/compiler-team/issues/683.
See #54341
With https://reviews.llvm.org/D86310 LLVM now has i128 aligned to
16-bytes on x86 based platforms. This will be in LLVM-18. This patch
updates all our spec targets to be 16-byte aligned, and removes the
alignment when speaking to older LLVM.
This results in Rust overaligning things relative to LLVM on older LLVMs.
This alignment change was discussed in rust-lang/compiler-team#683
See #54341 for additional information about why this is happening and
where this will be useful in the future.
This *does not* stabilize `i128`/`u128` for FFI.
Detect `NulInCStr` error earlier.
By making it an `EscapeError` instead of a `LitError`. This makes it like the other errors produced when checking string literals contents, e.g. for invalid escape sequences or bare CR chars.
NOTE: this means these errors are issued earlier, before expansion, which changes behaviour. It will be possible to move the check back to the later point if desired. If that happens, it's likely that all the string literal contents checks will be delayed together.
One nice thing about this: the old approach had some code in `report_lit_error` to calculate the span of the nul char from a range. This code used a hardwired `+2` to account for the `c"` at the start of a C string literal, but this should have changed to a `+3` for raw C string literals to account for the `cr"`, which meant that the caret in `cr"` nul error messages was one short of where it should have been. The new approach doesn't need any of this and avoids the off-by-one error.
r? ```@fee1-dead```
By making it an `EscapeError` instead of a `LitError`. This makes it
like the other errors produced when checking string literals contents,
e.g. for invalid escape sequences or bare CR chars.
NOTE: this means these errors are issued earlier, before expansion,
which changes behaviour. It will be possible to move the check back to
the later point if desired. If that happens, it's likely that all the
string literal contents checks will be delayed together.
One nice thing about this: the old approach had some code in
`report_lit_error` to calculate the span of the nul char from a range.
This code used a hardwired `+2` to account for the `c"` at the start of
a C string literal, but this should have changed to a `+3` for raw C
string literals to account for the `cr"`, which meant that the caret in
`cr"` nul error messages was one short of where it should have been. The
new approach doesn't need any of this and avoids the off-by-one error.
Avoid specialization in the metadata serialization code
With the exception of a perf-only specialization for byte slices and byte vectors.
This uses the same trick of introducing a new trait and having the Encodable and Decodable derives add a bound to it as used for TyEncoder/TyDecoder. The new code is clearer about which encoder/decoder uses which impl and it reduces the dependency of rustc on specialization, making it easier to remove support for specialization entirely or turn it into a construct that is only allowed for perf optimizations if we decide to do this.
This involves lots of breaking changes. There are two big changes that
force changes. The first is that the bitflag types now don't
automatically implement normal derive traits, so we need to derive them
manually.
Additionally, bitflags now have a hidden inner type by default, which
breaks our custom derives. The bitflags docs recommend using the impl
form in these cases, which I did.
Clairify `ast::PatKind::Struct` presese of `..` by using an enum instead of a bool
The bool is mainly used for when a `..` is present, but it is also set on recovery to avoid errors. The doc comment not describes both of these cases.
See cee794ee98/compiler/rustc_parse/src/parser/pat.rs (L890-L897) for the only place this is constructed.
r? ``@compiler-errors``
Add support for `for await` loops
This adds support for `for await` loops. This includes parsing, desugaring in AST->HIR lowering, and adding some support functions to the library.
Given a loop like:
```rust
for await i in iter {
...
}
```
this is desugared to something like:
```rust
let mut iter = iter.into_async_iter();
while let Some(i) = loop {
match core::pin::Pin::new(&mut iter).poll_next(cx) {
Poll::Ready(i) => break i,
Poll::Pending => yield,
}
} {
...
}
```
This PR also adds a basic `IntoAsyncIterator` trait. This is partly for symmetry with the way `Iterator` and `IntoIterator` work. The other reason is that for async iterators it's helpful to have a place apart from the data structure being iterated over to store state. `IntoAsyncIterator` gives us a good place to do this.
I've gated this feature behind `async_for_loop` and opened #118898 as the feature tracking issue.
r? `@compiler-errors`
Refactor AST trait bound modifiers
Instead of having two types to represent trait bound modifiers in the parser / the AST (`parser::ty::BoundModifiers` & `ast::TraitBoundModifier`), only to map one to the other later, just use `parser::ty::BoundModifiers` (moved & renamed to `ast::TraitBoundModifiers`).
The struct type is more extensible and easier to deal with (see [here](https://github.com/rust-lang/rust/pull/119099/files#r1430749981) and [here](https://github.com/rust-lang/rust/pull/119099/files#r1430752116) for context) since it more closely models what it represents: A compound of two kinds of modifiers, constness and polarity. Modeling this as an enum (the now removed `ast::TraitBoundModifier`) meant one had to add a new variant per *combination* of modifier kind, which simply isn't scalable and which lead to a lot of explicit non-DRY matches.
NB: `hir::TraitBoundModifier` being an enum is fine since HIR doesn't need to worry representing invalid modifier kind combinations as those get rejected during AST validation thereby immensely cutting down the number of possibilities.
