Stabilize raw-dylib for non-x86
This stabilizes the `raw-dylib` and `link_ordinal` features (#58713) for non-x86 architectures (i.e., `x86_64`, `aarch64` and `thumbv7a`):
* Marked the `raw_dylib` feature as `active`.
* Marked the `link_ordinal` attribute as `ungated`.
* Added new errors if either feature is used on x86 targets without the `raw_dylib` feature being enabled.
* Updated tests to only set the `raw_dylib` feature when building for x86.
Update `SessionDiagnostic::into_diagnostic` to take `Handler` instead of `ParseSess`
Suggested by the team in [this Zulip Topic](https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20SessionDiagnostic.20on.20Handler).
`Handler` already has almost all the capabilities of `ParseSess` when it comes to diagnostic emission, in this migration we only needed to add the ability to access `source_map` from the emitter in order to get a `Snippet` and the `start_point`. Not sure if adding these two methods [`span_to_snippet_from_emitter` and `span_start_point_from_emitter`] is the best way to address this gap.
P.S. If this goes in the right direction, then we probably may want to move `SessionDiagnostic` to `rustc_errors` and rename it to `DiagnosticHandler` or something similar.
r? `@davidtwco`
r? `@compiler-errors`
Suggested by the team in this Zulip Topic https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20SessionDiagnostic.20on.20Handler
Handler already has almost all the capabilities of ParseSess when it comes to diagnostic emission, in this migration we only needed to add the ability to access source_map from the emitter in order to get a Snippet and the start_point. Not sure if this is the best way to address this gap
Remove EntryKind from metadata.
This PR continues the refactor of metadata emission to be more systematic, iterating on definitions and filtering based on each definition's `DefKind`. This allows to remove the large `EntryKind` enum, replaced by linear tables in metadata.
- ... when creating diagnostics in rustc_metadata
- use the error_code! macro
- pass macro output to diag.code()
- use fluent from within manual implementation of SessionDiagnostic
- emit the untested errors in case they occur in the wild
- stop panicking in the probably-not-dead code, add fixme to write test
Revert let_chains stabilization
This is the revert against master, the beta revert was already done in #100538.
Bumps the stage0 compiler which already has it reverted.
Remove separate indexing of early-bound regions
~Based on https://github.com/rust-lang/rust/pull/99728.~
This PR copies some modifications from https://github.com/rust-lang/rust/pull/97839 around object lifetime defaults.
These modifications allow to stop counting generic parameters during lifetime resolution, and rely on the indexing given by `rustc_typeck::collect`.
Lazily decode SourceFile from metadata
Currently, source files from foreign crates are decoded up-front from metadata.
Spans from those crates were matched with the corresponding source using binary search among those files.
This PR changes the strategy by matching spans to files during encoding. This allows to decode source files on-demand, instead of up-front. The on-disk format for spans becomes: `<tag> <position from start of file> <length> <file index> <crate (if foreign file)>`.
Implement `#[rustc_default_body_unstable]`
This PR implements a new stability attribute — `#[rustc_default_body_unstable]`.
`#[rustc_default_body_unstable]` controls the stability of default bodies in traits.
For example:
```rust
pub trait Trait {
#[rustc_default_body_unstable(feature = "feat", isssue = "none")]
fn item() {}
}
```
In order to implement `Trait` user needs to either
- implement `item` (even though it has a default implementation)
- enable `#![feature(feat)]`
This is useful in conjunction with [`#[rustc_must_implement_one_of]`](https://github.com/rust-lang/rust/pull/92164), we may want to relax requirements for a trait, for example allowing implementing either of `PartialEq::{eq, ne}`, but do so in a safe way — making implementation of only `PartialEq::ne` unstable.
r? `@Aaron1011`
cc `@nrc` (iirc you were interested in this wrt `read_buf`), `@danielhenrymantilla` (you were interested in the related `#[rustc_must_implement_one_of]`)
P.S. This is my first time working with stability attributes, so I'm not sure if I did everything right 😅
Thin `AssocItem`
This PR removes a few fields from `AssocItem` that should be easily computed using other queries.
This simplifies some of the metadata decoding.
Add tests for raw-dylib with vectorcall, and fix vectorcall code generation
* Adds tests for using `raw-dylib` (#58713) with `vectorcall`.
* Fixed code generation for `vectorcall` (parameters have to be marked with `InReg`, just like `fastcall`).
* Enabled running the `raw-dylib` `fastcall` tests when using MSVC (since I had to add support in the test for running MSVC-only tests since GCC doesn't support `vectorcall`).
Prefer visibility map parents that are not `doc(hidden)` first
Far simpler approach to #98876.
This only fixes the case where the parent is `doc(hidden)`, not where the child is `doc(hidden)` since I don't know how to get the attrs on the import statement given a `ModChild`... I'll try to follow up with that, but this is a good first step.
This attribute allows to mark default body of a trait function as
unstable. This means that implementing the trait without implementing
the function will require enabling unstable feature.
This is useful in conjunction with `#[rustc_must_implement_one_of]`,
we may want to relax requirements for a trait, for example allowing
implementing either of `PartialEq::{eq, ne}`, but do so in a safe way
-- making implementation of only `PartialEq::ne` unstable.
Improves the diagnostic when a feature attribute is specified
unnecessarily but the feature implies another (i.e. it was partially
stabilized) to refer to the implied feature.
Signed-off-by: David Wood <david.wood@huawei.com>
Stop keeping metadata in memory before writing it to disk
Fixes#96358
I created this PR according with the instruction given in the issue except for the following points:
- While the issue says "Write metadata into the temporary file in `encode_and_write_metadata` even if `!need_metadata_file`", I could not do that. That is because though I tried to do that and run `x.py test`, I got a lot of test failures as follows.
<details>
<summary>List of failed tests</summary>
<pre>
<code>
failures:
[ui] src/test/ui/json-multiple.rs
[ui] src/test/ui/json-options.rs
[ui] src/test/ui/rmeta/rmeta-rpass.rs
[ui] src/test/ui/save-analysis/emit-notifications.rs
[ui] src/test/ui/svh/changing-crates.rs
[ui] src/test/ui/svh/svh-change-lit.rs
[ui] src/test/ui/svh/svh-change-significant-cfg.rs
[ui] src/test/ui/svh/svh-change-trait-bound.rs
[ui] src/test/ui/svh/svh-change-type-arg.rs
[ui] src/test/ui/svh/svh-change-type-ret.rs
[ui] src/test/ui/svh/svh-change-type-static.rs
[ui] src/test/ui/svh/svh-use-trait.rs
test result: FAILED. 12915 passed; 12 failed; 100 ignored; 0 measured; 0 filtered out; finished in 71.41s
Some tests failed in compiletest suite=ui mode=ui host=x86_64-unknown-linux-gnu target=x86_64-unknown-linux-gnu
Build completed unsuccessfully in 0:01:58
</code>
</pre>
</details>
- I could not resolve the extra tasks about `create_rmeta_file` and `create_compressed_metadata_file` for my lack of ability.
Move abstract const to middle
Moves AbstractConst (and all associated methods) to rustc middle for use in `rustc_infer`.
This allows for const resolution in infer to use abstract consts to walk consts and check if
they are resolvable.
This attempts to resolve the issue where `Foo<{ concrete const }, generic T>` is incorrectly marked as conflicting, and is independent from the other issue where nested abstract consts must be resolved.
r? `@lcnr`
Rollup of 9 pull requests
Successful merges:
- #97917 (Implement ExitCodeExt for Windows)
- #98844 (Reword comments and rename HIR visiting methods.)
- #98979 (interpret: use AllocRange in UninitByteAccess)
- #98986 (Fix missing word in comment)
- #98994 (replace process exit with more detailed exit in src/bootstrap/*.rs)
- #98995 (Add a test for #80471)
- #99002 (suggest adding a derive for #[default] applied to variants)
- #99004 (Add a test for #70408)
- #99017 (Replace boolean argument for print_where_clause with an enum to make code more clear)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Fix FFI-unwind unsoundness with mixed panic mode
UB maybe introduced when an FFI exception happens in a `C-unwind` foreign function and it propagates through a crate compiled with `-C panic=unwind` into a crate compiled with `-C panic=abort` (#96926).
To prevent this unsoundness from happening, we will disallow a crate compiled with `-C panic=unwind` to be linked into `panic-abort` *if* it contains a call to `C-unwind` foreign function or function pointer. If no such call exists, then we continue to allow such mixed panic mode linking because it's sound (and stable). In fact we still need the ability to do mixed panic mode linking for std, because we only compile std once with `-C panic=unwind` and link it regardless panic strategy.
For libraries that wish to remain compile-once-and-linkable-to-both-panic-runtimes, a `ffi_unwind_calls` lint is added (gated under `c_unwind` feature gate) to flag any FFI unwind calls that will cause the linkable panic runtime be restricted.
In summary:
```rust
#![warn(ffi_unwind_calls)]
mod foo {
#[no_mangle]
pub extern "C-unwind" fn foo() {}
}
extern "C-unwind" {
fn foo();
}
fn main() {
// Call to Rust function is fine regardless ABI.
foo::foo();
// Call to foreign function, will cause the crate to be unlinkable to panic-abort if compiled with `-Cpanic=unwind`.
unsafe { foo(); }
//~^ WARNING call to foreign function with FFI-unwind ABI
let ptr: extern "C-unwind" fn() = foo::foo;
// Call to function pointer, will cause the crate to be unlinkable to panic-abort if compiled with `-Cpanic=unwind`.
ptr();
//~^ WARNING call to function pointer with FFI-unwind ABI
}
```
Fix#96926
`@rustbot` label: T-compiler F-c_unwind
