Add `manual_is_ascii_check` lint
Addresses https://github.com/rust-lang/rust-clippy/issues/9290
This PR adds new lint `manual_is_ascii_check`, which detects comparison with ascii ranges using `matches!` macros.
As I mentioned as following in the Issue;
> Yes, that's true. we'll start small and then grow it.
> So I'll try to handle matches! macro with single range as suggested above.
However during writing first version, I was thinking that the changes to support alphabetic and digits will be small patch, so I made a single PR in hope review cost can be reduced.
changelog: add new lint [`manual_is_ascii_check`]
r? `@xFrednet`
Changelog for Rust 1.65
Roses are red,
violets are blue,
another 6 weeks,
another changelog, yahoo!
This did not rhyme,
luckily, not a crime.
I want to say something smart,
but I am out of time.
---
Note for the reviewer. This PR is written, as if Rust was already released on 2022-11-03. Please review the changes and approve if you agree, but only merge it after the release. :)
---
changelog: none
Add lint for confusing use of `^` instead of `.pow`
fixes#4205
Adds a lint named [`confusing_xor_and_pow`], it warns the user when `a ^ b` is used as the `.pow()` function, it doesn't warn for Hex, Binary... etc.
---
changelog: New lint: [`confusing_xor_and_pow`]
add new lint `seek_to_start_instead_of_rewind `
changelog: `seek_to_start_instead_of_rewind`: new lint to suggest using `rewind` instead of `seek` to start
Resolve#8600
Add `unused_format_specs` lint
Currently catches two cases:
An empty precision specifier:
```rust
// the same as {}
println!("{:.}", x);
```
And using formatting specs on `format_args!()`:
```rust
// prints `x.`, not `x .`
println("{:5}.", format_args!("x"));
```
changelog: new lint: [`unused_format_specs`]
Add `manual_filter` lint for `Option`
Share much of its implementation with `manual_map` and should greatly benefit from its previous feedback.
I'm sure it's possible to even more refactor both and would gladly take input on that as well as any clippy idiomatic usage, since this is my first lint addition.
I've added the lint to the complexity section for now, I don't know if every new lint needs to go in nursery first.
The matching could be expanded to more than `Some(<value>)` to lint on arbitrary struct matching inside the `Some` but I've left it like it was for `manual_map` for now. `needless_match::pat_same_as_expr` provides a more generic match example.
close https://github.com/rust-lang/rust-clippy/issues/8822
changelog: Add lint [`manual_filter`] for `Option`
This lint detects calls to a `&self`-taking `as_ptr` method, where
the result is then immediately cast to a `*mut T`. Code like this
is probably invalid, as that pointer will not have write permissions,
and `*mut T` is usually used to write through.
add `box-default` lint
This adds a `box-default` lint to suggest using `Box::default()` instead of `Box::new(Default::default())`, which offers less moving parts and potentially better performance according to [the perf book](https://nnethercote.github.io/perf-book/standard-library-types.html#box).
---
changelog: add [`box_default`] lint
Implement https://github.com/rust-lang/rust-clippy/issues/8368 - a new
lint to inline format arguments such as `print!("{}", var)` into
`print!("{var}")`.
code | suggestion | comment
---|---|---
`print!("{}", var)` | `print!("{var}")` | simple variables
`print!("{0}", var)` | `print!("{var}")` | positional variables
`print!("{v}", v=var)` | `print!("{var}")` | named variables
`print!("{0} {0}", var)` | `print!("{var} {var}")` | aliased variables
`print!("{0:1$}", var, width)` | `print!("{var:width$}")` | width
support
`print!("{0:.1$}", var, prec)` | `print!("{var:.prec$}")` | precision
support
`print!("{:.*}", prec, var)` | `print!("{var:.prec$}")` | asterisk
support
code | suggestion | comment
---|---|---
`print!("{0}={1}", var, 1+2)` | `print!("{var}={0}", 1+2)` | Format
string uses an indexed argument that cannot be inlined. Supporting this
case requires re-indexing of the format string.
changelog: [`uninlined_format_args`]: A new lint to inline format
arguments, i.e. `print!("{}", var)` into `print!("{var}")`
This is done because `to_owned` is very similarly named to `into_owned`, but the
effect of calling those two methods is completely different. This creates
confusion (stemming from the ambiguity of the 'owned' term in the context of
`Cow`s) and might not be what the writer intended.
new lint
This fixes#6576
If you added a new lint, here's a checklist for things that will be
checked during review or continuous integration.
- \[x] Followed [lint naming conventions][lint_naming]
- \[x] Added passing UI tests (including committed `.stderr` file)
- \[x] `cargo test` passes locally
- \[x] Executed `cargo dev update_lints`
- \[x] Added lint documentation
- \[x] Run `cargo dev fmt`
---
changelog: add [`multi_assignments`] lint
Lint `collapsible_str_replace`
fixes#6651
```
changelog: [`collapsible_str_replace`]: create new lint `collapsible_str_replace`
```
If you added a new lint, here's a checklist for things that will be
checked during review or continuous integration.
- \[x] Followed [lint naming conventions][lint_naming]
- \[x] Added passing UI tests (including committed `.stderr` file)
- \[x] `cargo test` passes locally
- \[ ] Executed `cargo dev update_lints`
- \[x] Added lint documentation
- \[x] Run `cargo dev fmt`
Add new lint [`positional_named_format_parameters`]
*Please write a short comment explaining your change (or "none" for internal only changes)*
changelog: Add new lint [`positional_named_format_parameters`] to warn when named parameters in format strings are used as positional arguments.
Add lint recommending using `std::iter::once` and `std::iter::empty`
```
changelog: [`iter_once`]: add new lint
changelog: [`iter_empty`]: add new lint
```
fixes#9186
- \[ ] Followed [lint naming conventions][lint_naming]
- \[x] Added passing UI tests (including committed `.stderr` file)
- \[x] `cargo test` passes locally
- \[x] Executed `cargo dev update_lints`
- \[x] Added lint documentation
- \[x] Run `cargo dev fmt`
[lint_naming]: https://rust-lang.github.io/rfcs/0344-conventions-galore.html#lints
The lint doesn't really follow the naming conventions. I don't have any better idea so I'm open to suggestions.
Add partialeq_to_none lint
Initial implementation of #9275, adding lint `partialeq_to_none`. This is my first time working on `clippy`, so please review carefully.
I'm unsure especially about the `Sugg`, as it covers the entire `BinOp`, instead of just covering one of the sides and the operator (see the multi-line example). I was unsure if pinpointing the suggestion wouldn't be brittle...
changelog: [`PARTIALEQ_TO_NONE`]: Initial commit
Add new lint `obfuscated_if_else`
part of #9100, additional commits could make it work with `then` and `unwrap_or_else` as well
changelog: Add new lint `obfuscated_if_else`
Changelog for Rust 1.62 🦖
This special artifact was just discovered. The artifact details changes to something called Clippy. Presently and from the context, we were unable to determine what this is supposed to be. All we know, is that it seems to have an active community around it which supports it. The members sometimes use paper clips as a secret symbol for Clippy.
I want to donate this artifact to the rust-lang organization, to have it displayed to the public.
---
changelog: none
add [`manual_find`] lint for function return case
part of the implementation discussed in #7143
changelog: add [`manual_find`] lint for function return case
Update description in clippy_lints/src/default_iter_empty.rs
Co-authored-by: Fridtjof Stoldt <xFrednet@gmail.com>
Update clippy_lints/src/default_iter_empty.rs
Co-authored-by: Alex Macleod <alex@macleod.io>
Update clippy_lints/src/default_iter_empty.rs
Co-authored-by: Alex Macleod <alex@macleod.io>
renamed default_iter_empty to default_instead_of_iter_empty
Avoid duplicate messages
add tests for regression
rewrite 'Why is this bad?'
cargo dev fmt
delete default_iter_empty lint in renamed_lint.rs
rewrite a message in the suggestion
cargo dev update_lints --check
new lint: `borrow_deref_ref`
changelog: ``[`borrow_deref_ref`]``
Related pr: #6837#7577
`@Jarcho` Could you please give a review?
`cargo lintcheck` gives no false negative (but tested crates are out-of-date).
TODO:
1. Not sure the name. `deref_on_immutable_ref` or some others?
