- `RUST_BACKTRACE=full` prints all the informations (old behaviour)
- `RUST_BACKTRACE=(0|no)` disables the backtrace.
- `RUST_BACKTRACE=<everything else>` (including `1`) shows a simplified
backtrace, without the function addresses and with cleaned filenames
and symbols. Also removes some unneded frames at the beginning and the
end.
Fixes#37783.
PR is #38165.
This might have performance implications. But do note that MSVC
disables FPO by default nowadays and it's use is limited in exception
heavy languages like C++.
Closes: #28218
This is done by adding a function that can return a filename
to pass to backtrace_create_state. The filename is obtained in
a safe way by first getting the filename, locking the file so it can't
be moved, and then getting the filename again and making sure it's the same.
See: https://github.com/rust-lang/rust/pull/37359#issuecomment-260123399
Issue: #33985
/# This is a combination of 16 commits.
/# The first commit's message is:
allow RUST_BACKTRACE=disabled to act as if unset
When RUST_BACKTRACE is set to "disabled" then this acts as if the env.
var is unset.
/# This is the 2nd commit message:
case insensitive "DiSaBLeD" RUST_BACKTRACE value
previously it expected a lowercase "disabled" to treat the env. var as
unset
/# This is the 3rd commit message:
RUST_BACKTRACE=0 acts as if unset
previously RUST_BACKTRACE=disabled was doing the same thing
/# This is the 4th commit message:
RUST_BACKTRACE=0|n|no|off acts as if unset
previously only RUST_BACKTRACE=0 acted as if RUST_BACKTRACE was unset
Now added more options (case-insensitive): 'n','no' and 'off'
eg. RUST_BACKTRACE=oFF
/# This is the 5th commit message:
DRY on the value of 2
DRY=don't repeat yourself
Because having to remember to keep the two places of '2' in sync is not
ideal, even though this is a simple enough case.
/# This is the 6th commit message:
Revert "DRY on the value of 2"
This reverts commit 95a0479d5cf72a2b2d9d21ec0bed2823ed213fef.
Nevermind this DRY on 2, because we already have a RY on 1,
besides the code is less readable this way...
/# This is the 7th commit message:
attempt to document unsetting RUST_BACKTRACE
/# This is the 8th commit message:
curb allocations when checking for RUST_BACKTRACE
this means we don't check for case-insensitivity anymore
/# This is the 9th commit message:
as decided, RUST_BACKTRACE=0 turns off backtrace
/# This is the 10th commit message:
RUST_TEST_NOCAPTURE=0 acts as if unset
(that is, capture is on)
Any other value acts as if nocapture is enabled (that is, capture is off)
/# This is the 11th commit message:
update other RUST_TEST_NOCAPTURE occurrences
apparently only one place needs updating
/# This is the 12th commit message:
update RUST_BACKTRACE in man page
/# This is the 13th commit message:
handle an occurrence of RUST_BACKTRACE
/# This is the 14th commit message:
ensure consistency with new rules for backtrace
/# This is the 15th commit message:
a more concise comment for RUST_TEST_NOCAPTURE
/# This is the 16th commit message:
update RUST_TEST_NOCAPTURE in man page
This mirrors the behavior of `clang-cl.exe` by adding a `CodeView` global
variable when emitting debug information. This should in turn help stack traces
that are generated when code is compiled with debuginfo enabled.
Closes#28133
Fix formatting
Remove unused imports
Refactor
Fix msvc build
Fix line lengths
Formatting
Enable backtrace tests
Fix using directive on mac
pwd info
Work-around buildbot PWD bug, and fix libbacktrace configuration
Use alternative to `env -u` which is not supported on bitrig
Disable tests on 32-bit windows gnu
This is OK to do given:
- PIE is supported on Android starting with API 16.
- The bots are running API 18.
- API < 16 now has a 12.5% market share[0] as of 2015-04-29.
Unfortunately, this breaks backtrace support. See #17520.
Closes#17437.
[0] https://developer.android.com/about/dashboards/index.html
This commit cleans out a large amount of deprecated APIs from the standard
library and some of the facade crates as well, updating all users in the
compiler and in tests as it goes along.
Namely, I have been annoyed in the past when I have done
`RUST_BACKTRACE=1 make check` only to discover (again) that such a
trick causes this test to fail, because it assumes that the
`RUST_BACKTRACE` environment variable is not set.
Fix#22870
https://github.com/rust-lang/rfcs/pull/221
The current terminology of "task failure" often causes problems when
writing or speaking about code. You often want to talk about the
possibility of an operation that returns a Result "failing", but cannot
because of the ambiguity with task failure. Instead, you have to speak
of "the failing case" or "when the operation does not succeed" or other
circumlocutions.
Likewise, we use a "Failure" header in rustdoc to describe when
operations may fail the task, but it would often be helpful to separate
out a section describing the "Err-producing" case.
We have been steadily moving away from task failure and toward Result as
an error-handling mechanism, so we should optimize our terminology
accordingly: Result-producing functions should be easy to describe.
To update your code, rename any call to `fail!` to `panic!` instead.
Assuming you have not created your own macro named `panic!`, this
will work on UNIX based systems:
grep -lZR 'fail!' . | xargs -0 -l sed -i -e 's/fail!/panic!/g'
You can of course also do this by hand.
[breaking-change]
Closes#16097 (fix variable name in tutorial)
Closes#16100 (More defailbloating)
Closes#16104 (Fix deprecation commment on `core::cmp::lexical_ordering`)
Closes#16105 (fix formatting in pointer guide table)
Closes#16107 (remove serialize::ebml, add librbml)
Closes#16108 (Fix heading levels in pointer guide)
Closes#16109 (rustrt: Don't conditionally init the at_exit QUEUE)
Closes#16111 (hexfloat: Deprecate to move out of the repo)
Closes#16113 (Add examples for GenericPath methods.)
Closes#16115 (Byte literals!)
Closes#16116 (Add a non-regression test for issue #8372)
Closes#16120 (Deprecate semver)
Closes#16124 (Deprecate uuid)
Closes#16126 (Deprecate fourcc)
Closes#16127 (Remove incorrect example)
Closes#16129 (Add note about production deployments.)
Closes#16131 (librustc: Don't ICE when trying to subst regions in destructor call.)
Closes#16133 (librustc: Don't ICE with struct exprs where the name is not a valid struct.)
Closes#16136 (Implement slice::Vector for Option<T> and CVec<T>)
Closes#16137 (alloc, arena, test, url, uuid: Elide lifetimes.)
This commit changes the `io::process::Command` API to provide
fine-grained control over the environment:
* The `env` method now inserts/updates a key/value pair.
* The `env_remove` method removes a key from the environment.
* The old `env` method, which sets the entire environment in one shot,
is renamed to `env_set_all`. It can be used in conjunction with the
finer-grained methods. This renaming is a breaking change.
To support these new methods, the internal `env` representation for
`Command` has been changed to an optional `HashMap` holding owned
`CString`s (to support non-utf8 data). The `HashMap` is only
materialized if the environment is updated. The implementation does not
try hard to avoid allocation, since the cost of launching a process will
dwarf any allocation cost.
This patch also adds `PartialOrd`, `Eq`, and `Hash` implementations for
`CString`.
[breaking-change]
This change registers new snapshots, allowing `*T` to be removed from the language. This is a large breaking change, and it is recommended that if compiler errors are seen that any FFI calls are audited to determine whether they should be actually taking `*mut T`.
This breaks a fair amount of code. The typical patterns are:
* `for _ in range(0, 10)`: change to `for _ in range(0u, 10)`;
* `println!("{}", 3)`: change to `println!("{}", 3i)`;
* `[1, 2, 3].len()`: change to `[1i, 2, 3].len()`.
RFC #30. Closes#6023.
[breaking-change]
There's a fair number of attributes that have to be whitelisted since
they're either looked for by rustdoc, in trans, or as needed. These can
be cleaned up in the future.
