Previously it was returning a value, mostly for the two reasons:
* Cloning Lvalue is very cheap most of the time (i.e. when Lvalue is not a Projection);
* There’s users who want &mut lvalue and there’s users who want &lvalue. Returning a value allows
to make either one easier when pattern matching (i.e. Some(ref dest) or Some(ref mut dest)).
However, I’m now convinced this is an invalid approach. Namely the users which want a mutable
reference may modify the Lvalue in-place, but the changes won’t be reflected in the final MIR,
since the Lvalue modified is merely a clone.
Instead, we have two accessors `destination` and `destination_mut` which return a reference to the
destination in desired mode.
`TypeFoldable`s can currently be visited inefficiently with an identity folder that is run only for its side effects. This creates a more efficient visitor for `TypeFoldable`s and uses it to implement `RegionEscape` and `HasProjectionTypes`, fixing cleanup issue #20298.
This is a pure refactoring.
It was recently realized that we accept defaulted type parameters everywhere, without feature gate, even though the only place that we really *intended* to accept them were on types. This PR adds a lint warning unless the "type-parameter-defaults" feature is enabled. This should eventually become a hard error.
This is a [breaking-change] in that new feature gates are required (or simply removing the defaults, which is probably a better choice as they have little effect at this time). Results of a [crater run][crater] suggest that approximately 5-15 crates are affected. I didn't do the measurement quite right so that run cannot distinguish "true" regressions from "non-root" regressions, but even the upper bound of 15 affected crates seems relatively minimal.
[crater]: https://gist.github.com/nikomatsakis/760c6a67698bd24253bf
cc @rust-lang/lang
r? @pnkfelix
This is roughly the same as my previous PR that created a dependency graph, but that:
1. The dependency graph is only optionally constructed, though this doesn't seem to make much of a difference in terms of overhead (see measurements below).
2. The dependency graph is simpler (I combined a lot of nodes).
3. The dependency graph debugging facilities are much better: you can now use `RUST_DEP_GRAPH_FILTER` to filter the dep graph to just the nodes you are interested in, which is super help.
4. The tests are somewhat more elaborate, including a few known bugs I need to fix in a second pass.
This is potentially a `[breaking-change]` for plugin authors. If you are poking about in tcx state or something like that, you probably want to add `let _ignore = tcx.dep_graph.in_ignore();`, which will cause your reads/writes to be ignored and not affect the dep-graph.
After this, or perhaps as an add-on to this PR in some cases, what I would like to do is the following:
- [x] Write-up a little guide to how to use this system, the debugging options available, and what the possible failure modes are.
- [ ] Introduce read-only and perhaps the `Meta` node
- [x] Replace "memoization tasks" with node from the map itself
- [ ] Fix the shortcomings, obviously! Notably, the HIR map needs to register reads, and there is some state that is not yet tracked. (Maybe as a separate PR.)
- [x] Refactor the dep-graph code so that the actual maintenance of the dep-graph occurs in a parallel thread, and the main thread simply throws things into a shared channel (probably a fixed-size channel). There is no reason for dep-graph construction to be on the main thread. (Maybe as a separate PR.)
Regarding performance: adding this tracking does add some overhead, approximately 2% in my measurements (I was comparing the build times for rustdoc). Interestingly, enabling or disabling tracking doesn't seem to do very much. I want to poke at this some more and gather a bit more data -- in some tests I've seen that 2% go away, but on others it comes back. It's not entirely clear to me if that 2% is truly due to constructing the dep-graph at all.
The next big step after this is write some code to dump the dep-graph to disk and reload it.
r? @michaelwoerister
This considerably simplifies code around calling functions and translation of Resume itself. This
removes requirement that a block containing Resume terminator is always translated after something
which creates a landing pad, thus allowing us to actually translate some valid MIRs we could not
translate before.
However, an assumption is added that translator is correct (in regards to landing pad generation)
and code will never reach the Resume terminator without going through a landing pad first. Breaking
these assumptions would pass an `undef` value into the personality functions.
This merges two separate Call terminators and uses a separate CallKind sub-enum instead.
A little bit unrelatedly, copying into destination value for a certain kind of invoke, is also
implemented here. See the associated comment in code for various details that arise with this
implementation.
DivergingCall is different enough from the regular converging Call to warrant the split. This also
inlines CallData struct and creates a new CallTargets enum in order to have a way to differentiate
between calls that do not have an associated cleanup block.
Note, that this patch still does not produce DivergingCall terminator anywhere. Look for that in
the next patches.
So far, calls going through `Fn::call`, `FnMut::call_mut`, or `FnOnce::call_once` have not been translated properly into MIR:
The call `f(a, b, c)` where `f: Fn(T1, T2, T3)` would end up in MIR as:
```
call `f` with arguments `a`, `b`, `c`
```
What we really want is:
```
call `Fn::call` with arguments `f`, `a`, `b`, `c`
```
This PR transforms these kinds of overloaded calls during `HIR -> HAIR` translation.
What's still a bit funky is that the `Fn` traits expect arguments to be tupled but due to special handling type-checking and trans, we do not actually tuple arguments and everything still checks out fine. So, after this PR we end up with MIR containing calls where function signature and arguments seemingly don't match:
```
call Fn::call(&self, args: (T1, T2, T3)) with arguments `f`, `a`, `b`, `c`
```
instead of
```
call Fn::call(&self, args: (T1, T2, T3)) with arguments `f`, (`a`, `b`, `c`) // <- args tupled!
```
It would be nice if the call traits could go without special handling in MIR and later on.
So far `librustc::trans::base::trans_fn()` and `trans_closure()` have been passed the list of attributes on the function being translated *only* if the function was local and non-generic. For generic functions, functions inlined from other crates, functions with foreign ABI and for closures, only an empty list of attributes was ever passed to `trans_fn()`.
This led to the case that generic functions marked with `#[rustc_mir]` where not actually translated via MIR but via the legacy translation path.
This PR makes function/closure attributes always be passed to `trans_fn()` and disables the one test where this makes a difference.
If there is an actual reason why attributes were not passed along in these cases, let me know.
cc @rust-lang/compiler
cc @luqmana regarding the test case
This moves back (essentially reverts #30265) into MIR-specific translation code, but keeps the
funcition split out, since it is expected to eventually become recursive.
Fixes https://github.com/rust-lang/rust/issues/29572
cc @oli-obk
This PR changes the `emit_opaque` and `read_opaque` methods in the RBML library to use a space-efficient binary encoder that does not emit any tags and uses the LEB128 variable-length integer format for all numbers it emits.
The space savings are nice, albeit a bit underwhelming, especially for dynamic libraries where metadata is already compressed.
| RLIBs | NEW | OLD |
|--------------|--------|-----------|
|libstd | 8.8 MB | 10.5 MB |
|libcore |15.6 MB | 19.7 MB |
|libcollections| 3.7 MB | 4.8 MB |
|librustc |34.0 MB | 37.8 MB |
|libsyntax |28.3 MB | 32.1 MB |
| SOs | NEW | OLD |
|---------------|-----------|--------|
| libstd | 4.8 MB | 5.1 MB |
| librustc | 8.6 MB | 9.2 MB |
| libsyntax | 7.8 MB | 8.4 MB |
At least this should make up for the size increase caused recently by also storing MIR in crate metadata.
Can this be a breaking change for anyone?
cc @rust-lang/compiler
This moves back (essentially reverts #30265) into MIR-specific translation code, but keeps the
funcition split out, since it is expected to eventually become recursive.
`auto_ref()` currently returns an Rvalue datum for the ref'd value,
which is fine for thin pointers, but for fat pointers this means that
once the pointer is moved out of that datum, its memory will be marked
as dead. And because there is not necessarily an intermediate temporary
involved we can end up marking memory as dead that is actually still
used.
As I don't want to break the micro-optimization for thin pointers by
always returning an Lvalue datum, I decided to only do so for fat
pointers.
Fix#30478
`auto_ref()` currently returns an Rvalue datum for the ref'd value,
which is fine for thin pointers, but for fat pointers this means that
once the pointer is moved out of that datum, its memory will be marked
as dead. And because there is not necessarily an intermediate temporary
involved we can end up marking memory as dead that is actually still
used.
As I don't want to break the micro-optimization for thin pointers by
always returning an Lvalue datum, I decided to only do so for fat
pointers.
Fix#30478
