I noticed today that `move` wasn't getting highlighted in my editor of choice (emacs), so I went ahead and added it as a keyword in the emacs, vim, and kate editor files. Apparently it has already been done for gedit.
Based on Windows bundle feedback we got to date,
- We *do* want to prefer the bundled linker: The external one might be for the wrong architecture (e.g. 32 bit vs 64 bit). On the other hand, binutils don't add many new features these days, so using an older bundled linker is not likely to be a problem.
- We *do* want to prefer bundled libraries: The external ones might not have the symbols we expect (e.g. what's needed for DWARF exceptions vs SjLj). Since `-L rustlib/<triple>/lib` appears first on the linker command line, it's a good place to keep our platform libs that we want to be found first.
Closes#18325, closes#17726.
`as` (already for a long time) and `move` (which was only added recently, AFAIK) are not marked as keywords in Vim syntax file, so they are not highlighted as keywords in Rust sources. This PR fixes this.
This commit renames a number of extension traits for slices and string
slices, now that they have been refactored for DST. In many cases,
multiple extension traits could now be consolidated. Further
consolidation will be possible with generalized where clauses.
The renamings are consistent with the [new `-Prelude`
suffix](https://github.com/rust-lang/rfcs/pull/344). There are probably
a few more candidates for being renamed this way, but that is left for
API stabilization of the relevant modules.
Because this renames traits, it is a:
[breaking-change]
However, I do not expect any code that currently uses the standard
library to actually break.
Closes#17917
Unicode characters and strings.
Use `\u0080`-`\u00ff` instead. ASCII/byte literals are unaffected.
This PR introduces a new function, `escape_default`, into the ASCII
module. This was necessary for the pretty printer to continue to
function.
RFC #326.
Closes#18062.
[breaking-change]
Removes all target-specific knowledge from rustc. Some targets have changed
during this, but none of these should be very visible outside of
cross-compilation. The changes make our targets more consistent.
iX86-unknown-linux-gnu is now only available as i686-unknown-linux-gnu. We
used to accept any value of X greater than 1. i686 was released in 1995, and
should encompass the bare minimum of what Rust supports on x86 CPUs.
The only two windows targets are now i686-pc-windows-gnu and
x86_64-pc-windows-gnu.
The iOS target has been renamed from arm-apple-ios to arm-apple-darwin.
A complete list of the targets we accept now:
arm-apple-darwin
arm-linux-androideabi
arm-unknown-linux-gnueabi
arm-unknown-linux-gnueabihf
i686-apple-darwin
i686-pc-windows-gnu
i686-unknown-freebsd
i686-unknown-linux-gnu
mips-unknown-linux-gnu
mipsel-unknown-linux-gnu
x86_64-apple-darwin
x86_64-unknown-freebsd
x86_64-unknown-linux-gnu
x86_64-pc-windows-gnu
Closes#16093
[breaking-change]
This wasn’t really consistent with other things; the last section of the
import was not highlighted in any other case.
Also `use {foo, bar};` was having the foo and bar not highlighted, where
they would have been as separate statements.
This change is an implementation of [RFC 69][rfc] which adds a third kind of
global to the language, `const`. This global is most similar to what the old
`static` was, and if you're unsure about what to use then you should use a
`const`.
The semantics of these three kinds of globals are:
* A `const` does not represent a memory location, but only a value. Constants
are translated as rvalues, which means that their values are directly inlined
at usage location (similar to a #define in C/C++). Constant values are, well,
constant, and can not be modified. Any "modification" is actually a
modification to a local value on the stack rather than the actual constant
itself.
Almost all values are allowed inside constants, whether they have interior
mutability or not. There are a few minor restrictions listed in the RFC, but
they should in general not come up too often.
* A `static` now always represents a memory location (unconditionally). Any
references to the same `static` are actually a reference to the same memory
location. Only values whose types ascribe to `Sync` are allowed in a `static`.
This restriction is in place because many threads may access a `static`
concurrently. Lifting this restriction (and allowing unsafe access) is a
future extension not implemented at this time.
* A `static mut` continues to always represent a memory location. All references
to a `static mut` continue to be `unsafe`.
This is a large breaking change, and many programs will need to be updated
accordingly. A summary of the breaking changes is:
* Statics may no longer be used in patterns. Statics now always represent a
memory location, which can sometimes be modified. To fix code, repurpose the
matched-on-`static` to a `const`.
static FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
change this code to:
const FOO: uint = 4;
match n {
FOO => { /* ... */ }
_ => { /* ... */ }
}
* Statics may no longer refer to other statics by value. Due to statics being
able to change at runtime, allowing them to reference one another could
possibly lead to confusing semantics. If you are in this situation, use a
constant initializer instead. Note, however, that statics may reference other
statics by address, however.
* Statics may no longer be used in constant expressions, such as array lengths.
This is due to the same restrictions as listed above. Use a `const` instead.
[breaking-change]
Closes#17718
[rfc]: https://github.com/rust-lang/rfcs/pull/246
The tables in libunicode are far too large to want to be inlined into any other
program, so these tables are all going to remain `static`. For them to be legal,
they cannot reference one another by value, but instead use references now.
This commit also modifies the src/etc/unicode.py script to generate the right
tables.
Apart from making the build system determine the LLDB version, this PR also fixes an issue with enums in LLDB pretty printers. In order for GDB's pretty printers to know for sure if a field of some value is an enum discriminant, I had rustc mark discriminant fields with the `artificial` DWARF tag. This worked out nicely for GDB but it turns out that one can't access artificial fields from LLDB. So I changed the debuginfo representation so that enum discriminants are marked by the special field name `RUST$ENUM$DISR` instead, which works in both cases.
The PR does not activate the LLDB test suite yet.
LLDB doesn't allow for reading 'artifical' fields (fields that are generated by the compiler). So do not mark, slice fields, enum discriminants, and GcBox value fields as artificial.
This makes the windows `make dist` target start producing binary tarballs, and tweaks install.sh so they work, in preparation for working on a combined Rust+Cargo installer.
Modify the system %PATH% environment variable instead of the current
user's %PATH% environment. The current user will be an admin user
that may not be the same user who originally started the installer.
Closes#17570.
There are currently two huge problems with the indent file:
1. Long list-like things cannot be indented. See #14446 for one example. Another one is long enums with over 100 lines, including comments. The indentation process stops after 100 lines and the rest is in column 0.
2. In certain files, opening a new line at mod level is extremely slow. See [this](https://github.com/mahkoh/posix.rs/blob/master/src/unistd/mod.rs) for an example. Opening a line at the very end and holing \<cr> down will freeze vim temporarily.
The reason for 1. is that cindent doesn't properly indent things that end with a `,` and the indent file tries to work around this by using the indentation of the previous line. It does this by recursively calling a function on the previous lines until it reaches the start of the block. Naturally O(n^2) function calls don't scale very well. Instead of recalculating the indentation of the previous line, we will now simply use the given indentation of the previous line and let the user deal with the rest. This is sufficient unless the user manually mis-indents a line.
The reason for 2. seems to be function calls of the form
```
searchpair('{\|(', '', '}\|)', 'nbW', 's:is_string_comment(line("."), col("."))')
```
I've no idea what this even does or why it is there since I cannot reproduce the mistake cindent is supposed to make without this fix. Therefore I've simply removed that part.
This is part of the migration of crates into the Cargo ecosystem. There
is now an external repository https://github.com/rust-lang/num for bignums.
The single use of libnum elsewhere in the repository is for a shootout
benchmark, which is being moved into the external crate.
Due to deprecation, this is a:
[breaking-change]
Currently the ZSH completions are quite old an nearly useless. This
brings them up to be compatible with current rust and makes them far
more useful.
Closes#17305
Adds a new configure flag, --release-channel, which determines how the version
number should be augmented with a release label, as well as how the distribution
artifacts will be named. This is entirely for use by the build automation.
--release-channel can be either 'source', 'nightly', 'beta', or 'stable'.
Here's a summary of the affect of these values on version number and
artifact naming, respectively:
* source - '0.12.0-pre', 'rust-0.12.0-pre-...'
* nightly - '0.12.0-nightly', 'rust-nightly-...'
* beta - '0.12.0-beta', 'rust-beta-...'
* stable - '0.12.0', 'rust-0.12.0-...'
Per http://discuss.rust-lang.org/t/rfc-impending-changes-to-the-release-process/508/1
gcc, ld, ar, dlltool, windres go into $(RUST)/bin/rustlib/<triple>/bin/
platform libraries and startup objects got into $(RUST)/bin/rustlib/<triple>/lib/
This builds on https://github.com/rust-lang/rust/pull/17109, putting the target triple into the installer name so that we can have both 32-bit and 64-bit.
The resulting installers will be called `rust-0.12.0-pre-x86_64-w64-mingw32.exe`, etc.
This unifies the `non_snake_case_functions` and `uppercase_variables` lints
into one lint, `non_snake_case`. It also now checks for non-snake-case modules.
This also extends the non-camel-case types lint to check type parameters, and
merges the `non_uppercase_pattern_statics` lint into the
`non_uppercase_statics` lint.
Because the `uppercase_variables` lint is now part of the `non_snake_case`
lint, all non-snake-case variables that start with lowercase characters (such
as `fooBar`) will now trigger the `non_snake_case` lint.
New code should be updated to use the new `non_snake_case` lint instead of the
previous `non_snake_case_functions` and `uppercase_variables` lints. All use of
the `non_uppercase_pattern_statics` should be replaced with the
`non_uppercase_statics` lint. Any code that previously contained non-snake-case
module or variable names should be updated to use snake case names or disable
the `non_snake_case` lint. Any code with non-camel-case type parameters should
be changed to use camel case or disable the `non_camel_case_types` lint.
[breaking-change]
When MSYS shell executes program, if its arguments look like MSYS paths,
MSYS automatically converts them into Windows paths.
For example, `/c/path:/d/path` becomes `C:\path;D:\path`.
However, if there is only one path e.g. `/c/path`, it becomes `C:/path`.
maketest.py reverts the behavior to reduce confusion between MSYS and
Windows, but it didn't handle the `/c/path` case. This patch fixes the
issue.
Fixes#15297Fixes#15250
We shouldn't be setting any settings in the syntax file. Better to put
them in the ftplugin, where they won't be pulled in by :syn-include and
can be cleaned up when changing the filetype.
We shouldn't be setting conceallevel in the syntax file. Besides not
being able to undo this if we switch to another syntax later, it also
interferes with embedding rust in other filetypes (such as markdown).
Instead, set it in the ftplugin, where it belongs.
We shouldn't be setting conceallevel in the syntax file. Besides not
being able to undo this if we switch to another syntax later, it also
interferes with embedding rust in other filetypes (such as markdown).
Instead, set it in the ftplugin, where it belongs.
These are like the existing bsearch methods but if the search fails,
it returns the next insertion point.
The new `binary_search` returns a `BinarySearchResult` that is either
`Found` or `NotFound`. For convenience, the `found` and `not_found`
methods convert to `Option`, ala `Result`.
Deprecate bsearch and bsearch_elem.
This leaves the `Share` trait at `std::kinds` via a `#[deprecated]` `pub use`
statement, but the `NoShare` struct is no longer part of `std::kinds::marker`
due to #12660 (the build cannot bootstrap otherwise).
All code referencing the `Share` trait should now reference the `Sync` trait,
and all code referencing the `NoShare` type should now reference the `NoSync`
type. The functionality and meaning of this trait have not changed, only the
naming.
Closes#16281
[breaking-change]
This leaves the `Share` trait at `std::kinds` via a `#[deprecated]` `pub use`
statement, but the `NoShare` struct is no longer part of `std::kinds::marker`
due to #12660 (the build cannot bootstrap otherwise).
All code referencing the `Share` trait should now reference the `Sync` trait,
and all code referencing the `NoShare` type should now reference the `NoSync`
type. The functionality and meaning of this trait have not changed, only the
naming.
Closes#16281
[breaking-change]
Previously the implementation detection regex would detect
`impl fmt::Show for MyStruct` as `fmt`. Now it will be detected as
`fmt::Show for MyStruct`. Implementations such as `impl MyStruct` will
still be detected as `MyStruct`.
This adds a new `Recompositions` iterator, which performs canonical composition on the result of the `Decompositions` iterator (which is canonical or compatibility decomposition). In effect this implements Unicode normalization forms C and KC.
Not included are two required patches:
* LLVM: segmented stack support for DragonFly [1]
* jemalloc: simple configure patches
[1]: http://reviews.llvm.org/D4705
… and color (raw) strings as such in attributes.
This fixes cases where a string contains ] inside an attribute:
that ] used to incorrectly end the attribute coloring.
For large (many lines) doc comments, I’ve found preferable to use
`#![doc = r#"..."#]` to avoid prefixing every line with `//!`.
Not included are two required patches:
* LLVM: segmented stack support for DragonFly [1]
* jemalloc: simple configure patches
[1]: http://reviews.llvm.org/D4705
Here’s what the Vim manual says in *:syn-include*:
:sy[ntax] include [@{grouplist-name}] {file-name}
All syntax items declared in the included file will have the
"contained" flag added. In addition, if a group list is
specified, all top-level syntax items in the included file will
be added to that list.
We had two rules for `rustModPath`, one `contained` and the other not.
The effect was that the second (now renamed to `rustModPathInUse`) was
being included in the group list, and thus that all identifiers were
being highlighted as `Include`, which is definitely not what we wanted.
This PR adds the LLDB autotests to the debuginfo test suite so I don't have to keep rebasing them locally. They are still disabled by default in `tests.mk`. One of the commits also contains a Python pretty printer which can make LLDB print values with Rust syntax. This was mainly added to deal with output format differences between LLDB versions but you can also use it for your normal LLDB debugging sessions.
```
// The following LLDB commands will load and activate the Rust printers
command script import ./src/etc/lldb_rust_formatters.py
type summary add --no-value --python-function lldb_rust_formatters.print_val -x .* --category Rust
type category enable Rust
```
Expect some rough edges with these, they have not been tested apart from there use in the autotests...
Tweak the text editing settings (softtabstop, textwidth, etc).
Add some settings to turn on folding and colorcolumn.
Add the undo_ftplugin changes that my previous patch forgot.
- Graphemes and GraphemeIndices structs implement iterators over
grapheme clusters analogous to the Chars and CharOffsets for chars in
a string. Iterator and DoubleEndedIterator are available for both.
- tidied up the exports for libunicode. crate root exports are now moved
into more appropriate module locations:
- UnicodeStrSlice, Words, Graphemes, GraphemeIndices are in str module
- UnicodeChar exported from char instead of crate root
- canonical_combining_class is exported from str rather than crate root
Since libunicode's exports have changed, programs that previously relied
on the old export locations will need to change their `use` statements
to reflect the new ones. See above for more information on where the new
exports live.
closes#7043
[breaking-change]
If ldconfig fails it emits a warning. This is very possible when installing
to a non-system directory, so the warning tries to indicate that it may
not be a problem.
If ldconfig fails it emits a warning. This is very possible when installing
to a non-system directory, so the warning tries to indicate that it may
not be a problem.
This adds detection of the relevant LD_LIBRARY_PATH-like environment variable
and appropriately sets it when testing whether binaries can run or not.
Additionally, the installation prints a recommended value if one is necessary.
Closes#15545
Add libunicode; move unicode functions from core
- created new crate, libunicode, below libstd
- split `Char` trait into `Char` (libcore) and `UnicodeChar` (libunicode)
- Unicode-aware functions now live in libunicode
- `is_alphabetic`, `is_XID_start`, `is_XID_continue`, `is_lowercase`,
`is_uppercase`, `is_whitespace`, `is_alphanumeric`, `is_control`, `is_digit`,
`to_uppercase`, `to_lowercase`
- added `width` method in UnicodeChar trait
- determines printed width of character in columns, or None if it is a non-NULL control character
- takes a boolean argument indicating whether the present context is CJK or not (characters with 'A'mbiguous widths are double-wide in CJK contexts, single-wide otherwise)
- split `StrSlice` into `StrSlice` (libcore) and `UnicodeStrSlice` (libunicode)
- functionality formerly in `StrSlice` that relied upon Unicode functionality from `Char` is now in `UnicodeStrSlice`
- `words`, `is_whitespace`, `is_alphanumeric`, `trim`, `trim_left`, `trim_right`
- also moved `Words` type alias into libunicode because `words` method is in `UnicodeStrSlice`
- unified Unicode tables from libcollections, libcore, and libregex into libunicode
- updated `unicode.py` in `src/etc` to generate aforementioned tables
- generated new tables based on latest Unicode data
- added `UnicodeChar` and `UnicodeStrSlice` traits to prelude
- libunicode is now the collection point for the `std::char` module, combining the libunicode functionality with the `Char` functionality from libcore
- thus, moved doc comment for `char` from `core::char` to `unicode::char`
- libcollections remains the collection point for `std::str`
The Unicode-aware functions that previously lived in the `Char` and `StrSlice` traits are no longer available to programs that only use libcore. To regain use of these methods, include the libunicode crate and `use` the `UnicodeChar` and/or `UnicodeStrSlice` traits:
extern crate unicode;
use unicode::UnicodeChar;
use unicode::UnicodeStrSlice;
use unicode::Words; // if you want to use the words() method
NOTE: this does *not* impact programs that use libstd, since UnicodeChar and UnicodeStrSlice have been added to the prelude.
closes#15224
[breaking-change]
This adds detection of the relevant LD_LIBRARY_PATH-like environment variable
and appropriately sets it when testing whether binaries can run or not.
Additionally, the installation prints a recommended value if one is necessary.
The latest change to aturon/rust-guidelines states that lines must not
exceed 99 characters. This gets rid of the 80/100 split, so we don't
need to customize colorcolumn amymore.
Setting softtabstop makes <Del> delete 4 spaces as if it were a tab.
Setting textwidth allows comments to be wrapped automatically. It's set
at 80, which is the recommended line length for Rust programs. There are
suggestions that it should be 79, but our current style guide says 80 so
that's what we're matching.
A new setting g:rust_colorcolumn sets colorcolumn as well, to +1,101.
This indicates both the textwidth and the second stricter line length of
100 that our style guide lists.
- created new crate, libunicode, below libstd
- split Char trait into Char (libcore) and UnicodeChar (libunicode)
- Unicode-aware functions now live in libunicode
- is_alphabetic, is_XID_start, is_XID_continue, is_lowercase,
is_uppercase, is_whitespace, is_alphanumeric, is_control,
is_digit, to_uppercase, to_lowercase
- added width method in UnicodeChar trait
- determines printed width of character in columns, or None if it is
a non-NULL control character
- takes a boolean argument indicating whether the present context is
CJK or not (characters with 'A'mbiguous widths are double-wide in
CJK contexts, single-wide otherwise)
- split StrSlice into StrSlice (libcore) and UnicodeStrSlice
(libunicode)
- functionality formerly in StrSlice that relied upon Unicode
functionality from Char is now in UnicodeStrSlice
- words, is_whitespace, is_alphanumeric, trim, trim_left, trim_right
- also moved Words type alias into libunicode because words method is
in UnicodeStrSlice
- unified Unicode tables from libcollections, libcore, and libregex into
libunicode
- updated unicode.py in src/etc to generate aforementioned tables
- generated new tables based on latest Unicode data
- added UnicodeChar and UnicodeStrSlice traits to prelude
- libunicode is now the collection point for the std::char module,
combining the libunicode functionality with the Char functionality
from libcore
- thus, moved doc comment for char from core::char to unicode::char
- libcollections remains the collection point for std::str
The Unicode-aware functions that previously lived in the Char and
StrSlice traits are no longer available to programs that only use
libcore. To regain use of these methods, include the libunicode crate
and use the UnicodeChar and/or UnicodeStrSlice traits:
extern crate unicode;
use unicode::UnicodeChar;
use unicode::UnicodeStrSlice;
use unicode::Words; // if you want to use the words() method
NOTE: this does *not* impact programs that use libstd, since UnicodeChar
and UnicodeStrSlice have been added to the prelude.
closes#15224
[breaking-change]
This will break code that used the old `Index` trait. Change this code
to use the new `Index` traits. For reference, here are their signatures:
pub trait Index<Index,Result> {
fn index<'a>(&'a self, index: &Index) -> &'a Result;
}
pub trait IndexMut<Index,Result> {
fn index_mut<'a>(&'a mut self, index: &Index) -> &'a mut Result;
}
Closes#6515.
[breaking-change]
Platform-detection code from `configure` copied over to `install.sh`
in order to special case the lib dir being `bin` on Windows instead
of `lib`.
Short-term fix for #13810.
Part of #14248
Main authors:
- @Ryman: OK
- @TeXitoi: OK
- @pcwalton: OK
Minor authors:
- @brson: OK
- @alexcrichton: OK
- @kballard: OK
Remark: @tedhorst was a main contributor, but its contribution
disapear with @pcwalton rewrite at af4ea11
@brson OK?
Part of #14248
Main authors:
- @Ryman: OK
- @TeXitoi: OK
- @pcwalton: OK
Minor authors:
- @brson: OK
- @alexcrichton: OK
- @kballard: OK
Remark: @tedhorst was a main contributor, but its contribution
disapear with @pcwalton rewrite at af4ea11
