This commit aims to prepare the `std::hash` module for alpha by formalizing its
current interface whileholding off on adding `#[stable]` to the new APIs. The
current usage with the `HashMap` and `HashSet` types is also reconciled by
separating out composable parts of the design. The primary goal of this slight
redesign is to separate the concepts of a hasher's state from a hashing
algorithm itself.
The primary change of this commit is to separate the `Hasher` trait into a
`Hasher` and a `HashState` trait. Conceptually the old `Hasher` trait was
actually just a factory for various states, but hashing had very little control
over how these states were used. Additionally the old `Hasher` trait was
actually fairly unrelated to hashing.
This commit redesigns the existing `Hasher` trait to match what the notion of a
`Hasher` normally implies with the following definition:
trait Hasher {
type Output;
fn reset(&mut self);
fn finish(&self) -> Output;
}
This `Hasher` trait emphasizes that hashing algorithms may produce outputs other
than a `u64`, so the output type is made generic. Other than that, however, very
little is assumed about a particular hasher. It is left up to implementors to
provide specific methods or trait implementations to feed data into a hasher.
The corresponding `Hash` trait becomes:
trait Hash<H: Hasher> {
fn hash(&self, &mut H);
}
The old default of `SipState` was removed from this trait as it's not something
that we're willing to stabilize until the end of time, but the type parameter is
always required to implement `Hasher`. Note that the type parameter `H` remains
on the trait to enable multidispatch for specialization of hashing for
particular hashers.
Note that `Writer` is not mentioned in either of `Hash` or `Hasher`, it is
simply used as part `derive` and the implementations for all primitive types.
With these definitions, the old `Hasher` trait is realized as a new `HashState`
trait in the `collections::hash_state` module as an unstable addition for
now. The current definition looks like:
trait HashState {
type Hasher: Hasher;
fn hasher(&self) -> Hasher;
}
The purpose of this trait is to emphasize that the one piece of functionality
for implementors is that new instances of `Hasher` can be created. This
conceptually represents the two keys from which more instances of a
`SipHasher` can be created, and a `HashState` is what's stored in a
`HashMap`, not a `Hasher`.
Implementors of custom hash algorithms should implement the `Hasher` trait, and
only hash algorithms intended for use in hash maps need to implement or worry
about the `HashState` trait.
The entire module and `HashState` infrastructure remains `#[unstable]` due to it
being recently redesigned, but some other stability decision made for the
`std::hash` module are:
* The `Writer` trait remains `#[experimental]` as it's intended to be replaced
with an `io::Writer` (more details soon).
* The top-level `hash` function is `#[unstable]` as it is intended to be generic
over the hashing algorithm instead of hardwired to `SipHasher`
* The inner `sip` module is now private as its one export, `SipHasher` is
reexported in the `hash` module.
And finally, a few changes were made to the default parameters on `HashMap`.
* The `RandomSipHasher` default type parameter was renamed to `RandomState`.
This renaming emphasizes that it is not a hasher, but rather just state to
generate hashers. It also moves away from the name "sip" as it may not always
be implemented as `SipHasher`. This type lives in the
`std::collections::hash_map` module as `#[unstable]`
* The associated `Hasher` type of `RandomState` is creatively called...
`Hasher`! This concrete structure lives next to `RandomState` as an
implemenation of the "default hashing algorithm" used for a `HashMap`. Under
the hood this is currently implemented as `SipHasher`, but it draws an
explicit interface for now and allows us to modify the implementation over
time if necessary.
There are many breaking changes outlined above, and as a result this commit is
a:
[breaking-change]
fmt::Show is for debugging, and can and should be implemented for
all public types. This trait is used with `{:?}` syntax. There still
exists #[derive(Show)].
fmt::String is for types that faithfully be represented as a String.
Because of this, there is no way to derive fmt::String, all
implementations must be purposeful. It is used by the default format
syntax, `{}`.
This will break most instances of `{}`, since that now requires the type
to impl fmt::String. In most cases, replacing `{}` with `{:?}` is the
correct fix. Types that were being printed specifically for users should
receive a fmt::String implementation to fix this.
Part of #20013
[breaking-change]
Many of libstd's macros are now re-exported from libcore and libcollections.
Their libstd definitions have moved to a macros_stage0 module and can disappear
after the next snapshot.
Where the two crates had already diverged, I took the libstd versions as
they're generally newer and better-tested. See e.g. d3c831b, which was a fix to
libstd's assert_eq!() that didn't make it into libcore's.
Fixes#16806.
This removes a large array of deprecated functionality, regardless of how
recently it was deprecated. The purpose of this commit is to clean out the
standard libraries and compiler for the upcoming alpha release.
Some notable compiler changes were to enable warnings for all now-deprecated
command line arguments (previously the deprecated versions were silently
accepted) as well as removing deriving(Zero) entirely (the trait was removed).
The distribution no longer contains the libtime or libregex_macros crates. Both
of these have been deprecated for some time and are available externally.
This commit is an implementation of [RFC 503][rfc] which is a stabilization
story for the prelude. Most of the RFC was directly applied, removing reexports.
Some reexports are kept around, however:
* `range` remains until range syntax has landed to reduce churn.
* `Path` and `GenericPath` remain until path reform lands. This is done to
prevent many imports of `GenericPath` which will soon be removed.
* All `io` traits remain until I/O reform lands so imports can be rewritten all
at once to `std::io::prelude::*`.
This is a breaking change because many prelude reexports have been removed, and
the RFC can be consulted for the exact list of removed reexports, as well as to
find the locations of where to import them.
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0503-prelude-stabilization.md
[breaking-change]
Closes#20068
This patch marks `PartialEq`, `Eq`, `PartialOrd`, and `Ord` as
`#[stable]`, as well as the majorify of manual implementaitons of these
traits. The traits match the [reform
RFC](https://github.com/rust-lang/rfcs/pull/439).
Along the way, two changes are made:
* The recently-added type parameters for `Ord` and `Eq` are
removed. These were mistakenly added while adding them to `PartialOrd`
and `PartialEq`, but they don't make sense given the laws that are
required for (and use cases for) `Ord` and `Eq`.
* More explicit laws are added for `PartialEq` and `PartialOrd`,
connecting them to their associated mathematical concepts.
In the future, many of the impls should be generalized; see
since generalizing later is not a breaking change.
[breaking-change]
post-unboxed-closure-conversion. This requires a fair amount of
annoying coercions because all the `map` etc types are defined
generically over the `F`, so the automatic coercions don't propagate;
this is compounded by the need to use `let` and not `as` due to
stage0. That said, this pattern is to a large extent temporary and
unusual.
This removes the type SetAlgebraItems and replaces it with the
structs Intersection and Difference.
Rename the existing HashSet iterators according to RFC #344:
* SetItems -> Iter
* SetMoveItems -> IntoIter
* Remaining set combination iterators renamed to Union and SymmetricDifference
It is useful to move all the elements out of a hashmap without deallocating
the underlying buffer. It came up in IRC, and this patch implements it as
`drain`.
r? @Gankro
cc: @frankmcsherry
This removes the type SetAlgebraItems and replaces it with the
structs Intersection and Difference.
Rename the existing HashSet iterators according to RFC #344:
* SetItems -> Iter
* SetMoveItems -> IntoIter
* Remaining set combination iterators renamed to Union and SymmetricDifference
[breaking-change]
It is useful to move all the elements out of some collections without
deallocating the underlying buffer. It came up in IRC, and this patch
implements it as `drain`. This has been discussed as part of RFC 509.
r? @Gankro
cc: @frankmcsherry
Using a type alias for iterator implementations is fragile since this exposes the implementation to users of the iterator, and any changes could break existing code.
This PR changes the iterators of `BTreeMap`, `BTreeSet`, `HashMap`, and `HashSet` to use proper new types, rather than type aliases. However, since it is fair-game to treat a type-alias as the aliased type, this is a:
[breaking-change].
This commit performs a second pass stabilization of the `std::default` module.
The module was already marked `#[stable]`, and the inheritance of `#[stable]`
was removed since this attribute was applied. This commit adds the `#[stable]`
attribute to the trait definition and one method name, along with all
implementations found in the standard distribution.
Using a type alias for iterator implementations is fragile since this
exposes the implementation to users of the iterator, and any changes
could break existing code.
This commit changes the iterators of `HashSet` to use
proper new types, rather than type aliases. However, since it is
fair-game to treat a type-alias as the aliased type, this is a:
[breaking-change].
Using a type alias for iterator implementations is fragile since this
exposes the implementation to users of the iterator, and any changes
could break existing code.
This commit changes the keys and values iterators of `HashMap` to use
proper new types, rather than type aliases. However, since it is
fair-game to treat a type-alias as the aliased type, this is a:
[breaking-change].
This commit collapses the various prelude traits for slices into just one trait:
* SlicePrelude/SliceAllocPrelude => SliceExt
* CloneSlicePrelude/CloneSliceAllocPrelude => CloneSliceExt
* OrdSlicePrelude/OrdSliceAllocPrelude => OrdSliceExt
* PartialEqSlicePrelude => PartialEqSliceExt
