Checks for the suspicious use of OpenOptions::create()
without an explicit OpenOptions::truncate().
create() alone will either create a new file or open an
existing file. If the file already exists, it will be
overwritten when written to, but the file will not be
truncated by default. If less data is written to the file
than it already contains, the remainder of the file will
remain unchanged, and the end of the file will contain old
data.
In most cases, one should either use `create_new` to ensure
the file is created from scratch, or ensure `truncate` is
called so that the truncation behaviour is explicit.
`truncate(true)` will ensure the file is entirely overwritten
with new data, whereas `truncate(false)` will explicitely
keep the default behavior.
```rust
use std::fs::OpenOptions;
OpenOptions::new().create(true).truncate(true);
```
Adds a new lint to suggest using `const` on `thread_local!`
initializers that can be evaluated at compile time.
Impl details:
The lint relies on the expansion of `thread_local!`. For non
const-labelled initializers, `thread_local!` produces a function
called `__init` that lazily initializes the value. We check the function
and decide whether the body can be const. The body of the function is
exactly the initializer. If so, we lint the body.
changelog: new lint [`thread_local_initializer_can_be_made_const`]
New Lint: empty_enum_variants_with_brackets
This PR:
- adds a new early pass lint that checks for enum variants with no fields that were defined using brackets. **Category: Restriction**
- adds relevant UI tests for the new lint.
Closes#12007
```
changelog: New lint: [`empty_enum_variants_with_brackets`]
```
feat: add `manual_is_variant_and` lint
changelog: add a new lint [`manual_is_variant_and`].
- Replace `option.map(f).unwrap_or_default()` and `result.map(f).unwrap_or_default()` with `option.is_some_and(f)` and `result.is_ok_and(f)` where `f` is a function or closure that returns `bool`.
- MSRV is set to 1.70.0 for this lint; when `is_some_and` and `is_ok_and` was stabilised
---
For example, for the following code:
```rust
let opt = Some(0);
opt.map(|x| x > 1).unwrap_or_default();
```
It suggests to instead write:
```rust
let opt = Some(0);
opt.is_some_and(|x| x > 1)
```
- add a new late pass lint, with config options
- add ui tests for both variations of config option
- update CHANGELOG.md
github feedback
bump version to 1.77 and run cargo collect-metadata
Change `,` to `;` in `conf.rs`
new lint: `eager_transmute`
A small but still hopefully useful lint that looks for patterns such as `(x < 5).then_some(transmute(x))`.
This is almost certainly wrong because it evaluates the transmute eagerly and can lead to surprises such as the check being completely removed and always evaluating to `Some` no matter what `x` is (it is UB after all when the integer is not a valid bitpattern for the transmuted-to type). [Example](https://godbolt.org/z/xoY34fPzh).
The user most likely meant to use `then` instead.
I can't remember where I saw this but this is inspired by a real bug that happened in practice.
This could probably be a correctness lint?
changelog: new lint: [`eager_int_transmute`]
Adds a pair of lints that check for cases of an iterator over `Result`
and `Option` followed by `filter` without being followed by `map` as
that is covered already by a different, specialized lint.
changelog: New Lint: [`iter_filter_is_some`]
changelog: New Lint: [`iter_filter_is_ok`]
New Lint: `result_filter_map` / Mirror of `option_filter_map`
Added the `Result` mirror of `option_filter_map`.
changelog: New Lint: [`result_filter_map`]
I had to move around some code because the function def was too long 🙃.
I have also added some pattern checks on `option_filter_map`
Add new `unconditional_recursion` lint
Currently, rustc `unconditional_recursion` doesn't detect cases like:
```rust
enum Foo {
A,
B,
}
impl PartialEq for Foo {
fn eq(&self, other: &Self) -> bool {
self == other
}
}
```
This is because the lint is currently implemented only for one level, and in the above code, `self == other` will then call `impl PartialEq for &T`, escaping from the detection. The fix for it seems to be a bit tricky (I started investigating potential solution to add one extra level of recursion [here](https://github.com/rust-lang/rust/compare/master...GuillaumeGomez:rust:trait-impl-recursion?expand=1) but completely broken at the moment).
I expect that this situation will remain for a while. In the meantime, I think it's acceptable to check it directly into clippy for the time being as a lot of easy cases like this one can be easily checked (next I plan to extend it to cover other traits like `ToString`).
changelog: Add new `unconditional_recursion` lint
Added the `Result` mirror of `option_filter_map` to catch
```
.into_iter().filter(Result::is_ok).map(Result::unwrap)
```
changelog: New Lint: [`result_filter_map`]
Co-authored-by: Alex Macleod <alex@macleod.io>
new lint to detect infinite loop
closes: #11438
changelog: add new lint to detect infinite loop
~*I'll change the lint name*~. Should I name it `infinite_loop` or `infinite_loops` is fine? Ahhhh, English is hard...
uninhabited_reference: new lint
Close#11851
The lint is implemented on function parameters and return types, as this is the place where the risk of exchanging references to uninhabited types is the highest. Other constructs, such as in a local variable,
would require the use of `unsafe` and will clearly be done on purpose.
changelog: [`uninhabited_reference`]: new lint
expending lint [`blocks_in_if_conditions`] to check match expr as well
closes: #11814
changelog: rename lint `blocks_in_if_conditions` to [`blocks_in_conditions`] and expand it to check blocks in match scrutinees
Implements a lint to prevent implementation of Hash, Borrow<str> and
Borrow<[u8]> as it breaks Borrow<T> "semantics". According to the book,
types that implement Borrow<A> and Borrow<B> must ensure equality of
borrow results under Eq,Ord and Hash.
> In particular Eq, Ord and Hash must be equivalent for borrowed and
owned values: x.borrow() == y.borrow() should give the same result as x == y.
In the same way, hash(x) == hash(x as Borrow<[u8]>) != hash(x as Borrow<str>).
changelog: newlint [`impl_hash_with_borrow_str_and_bytes`]
side effect for `enum_variants`:
use .first() instead of .get(0) in enum_variants lint
move to_camel_case to str_util module
move module, enum and struct name repetitions check to a single file `item_name_repetitions`
rename enum_variants threshold config option
This lint checks for `as_str` on a `String` immediately followed by `as_bytes` or `is_empty` as those methods are available on `String` too. This could possibly also be extended to `&[u8]` in the future.
Split `needless_borrow` into two lints
Splits off the case where the borrow is used as a generic argument to a function. I think the two cases are different enough to warrant a separate lint.
The tests for the new lint have been reordered to group related parts together. Two warning have been dropped, one looked like it was testing the generic argument form, but it ends up triggering the auto-deref variant. The second was just a redundant test that didn't do anything interesting.
An issue with cycle detection is also included. The old version was checking if a cycle was reachable from a block when it should have been checking if the block is part or a cycle.
As a side note, I'm liking the style of just jamming all the tests into separate scopes in main.
changelog: Split off `needless_borrows_for_generic_args` from `needless_borrow`
Add config flag for reborrows in explicit_iter_loop
This PR adds a config flag for enforcing explicit into iter lint for reborrowed values. The config flag, `enforce_iter_loop_reborrow`, can be added to clippy.toml files to enable the linting behaviour. By default the reborrow lint is disabled.
fixes: #11074
changelog: [`explicit_iter_loop`]: add config flag `enforce_iter_loop_reborrow` to disable reborrow linting by default
new lint: `iter_out_of_bounds`
Closes#11345
The original idea in the linked issue seemed to be just about arrays afaict, but I extended this to catch some other iterator sources such as `iter::once` or `iter::empty`.
I'm not entirely sure if this name makes a lot of sense now that it's not just about arrays anymore (specifically, not sure if you can call `.take(1)` on an `iter::Empty` to be "out of bounds"?).
changelog: [`iter_out_of_bounds`]: new lint
New lint `ignored_unit_patterns`
This idea comes from #11238. I've put the lint in `pedantic` as it might trigger numerous positives (three in Clippy itself).
changelog: [`ignored_unit_patterns`]: new lint
New lint [`needless_return_with_try`]
Closes#10902
Rather than having a config option, this will just suggest removing the "return"; if `try_err` is used as well, then it'll be added again but without the `?`.
changelog: New lint [`needless_return_with_try`]
`unwrap_or_else_default` -> `unwrap_or_default` and improve resulting lint
Resolves#10080 (though it doesn't implement exactly what's described there)
This PR does the following:
1. Merges `unwrap_or_else_default.rs`'s code into `or_fun_call.rs`
2. Extracts the code to handle `unwrap_or(/* default value */)` and similar, and moves it into `unwrap_or_else_default`
3. Implements the missing functionality from #9342, e.g.,, to handle `or_insert_with(Default::default)`
4. Renames `unwrap_or_else_default` to `unwrap_or_default` (since the "new" lint handles both `unwrap_or` and `unwrap_or_else`, it seemed sensible to use the shortened name)
This PR is currently two commits. The first implements 1-3, the second implements 4.
A word about 2: the `or_fun_call` lint currently produces warnings like the following:
```
error: use of `unwrap_or` followed by a call to `new`
--> $DIR/or_fun_call.rs:56:14
|
LL | with_new.unwrap_or(Vec::new());
| ^^^^^^^^^^^^^^^^^^^^^ help: try: `unwrap_or_default()`
```
To me, such warnings look like they should come from `unwrap_or_else_default`, not `or_fun_call`, especially since `or_fun_call` is [in the nursery](https://github.com/rust-lang/rust-clippy/pull/9829).
---
changelog: Move: Renamed `unwrap_or_else_default` to [`unwrap_or_default`]
[#10120](https://github.com/rust-lang/rust-clippy/pull/10120)
changelog: Enhancement: [`unwrap_or_default`]: Now handles more functions, like `or_insert_with`
[#10120](https://github.com/rust-lang/rust-clippy/pull/10120)
<!-- changelog_checked-->
fix dogfood lints in `redundant_local`
keep `redundant_local` from running in proc macros
rewrite `redundant_local` as late pass
make redundant_local's `find_binding` more readable
pluralize `redundant_locals` name
add test for `redundant_locals` in macros
test `redundant_locals` in proc macros
use more destructuring in `redundant_locals`
fix: format redundant_locals.rs
ignore needless_pass_by_mut_ref in redundant_locals test
Add `needless_pass_by_ref_mut` lint
changelog: [`needless_pass_by_ref_mut`]: This PR add a new lint `needless_pass_by_ref_mut` which emits a warning in case a `&mut` function argument isn't used mutably. It doesn't warn on trait and trait impls functions.
Fixes#8863.
cargo dev fmt
cargo test passes
cargo test passes
refactor a lil
Update bool_comparison.stderr
heavily refactor + bump `clippy::version`
refactor
refactor
check bounds to increase accuracy, and add todos
new lint: `type_id_on_box`
Closes#7687.
A new lint that detects calling `.type_id()` on `Box<dyn Any>` (and not on the underlying `dyn Any`), which can make up for some pretty confusing bugs!
changelog: new lint: [`type_id_on_box`]
New lint [`tuple_array_conversions`]
Closes#10748
PS, the implementation is a bit ugly 😅 ~~I will likely refactor soon enough :)~~ Done :D
changelog: New lint [`tuple_array_conversions`]
New lint [`redundant_at_rest_pattern`]
Closes#11011
It's always a great feeling when a new lint triggers on clippy itself 😄
changelog: New lint [`redundant_at_rest_pattern`]
new lint [`single_range_in_vec_init`]
Lints on `vec![0..200]` (or `[0..200]`), suggesting either `(0..200).collect::<Vec<i32>>()` or `[0; 200]`.
Haven't tested it with anything that isn't primitive. Probably should!
Closes#10932
changelog: new lint [`single_range_in_vec_init`]
