Fix TLS access mir opt test and remove stale files
Thanks `@pietroalbini` for noticing that the TLS test was not doing what it was supposed to. Switched to `PreCodegen` because `SimplifyCfg` does not run on opt level 0.
Also addresses the easy part of #97564 .
r? rust-lang/mir-opt
Clarify the guarantees of Vec::as_ptr and Vec::as_mut_ptr when there's no allocation
Currently the documentation says they return a pointer to the vector's buffer, which has the implied precondition that the vector allocated some memory. However `Vec`'s documentation also specifies that it won't always allocate, so it's unclear whether the pointer returned is valid in that case. Of course you won't be able to read/write actual bytes to/from it since the capacity is 0, but there's an exception: zero sized read/writes. They are still valid as long as the pointer is not null and the memory it points to wasn't deallocated, but `Vec::as_ptr` and `Vec::as_mut_ptr` don't specify that's not the case. This PR thus specifies they are actually valid for zero sized reads since `Vec` is implemented to hold a dangling pointer in those cases, which is neither null nor was deallocated.
Linux's `checkpatch.pl` reports:
```txt
#42544: FILE: rust/alloc/vec/mod.rs:2692:
WARNING: Possible repeated word: 'to'
+ // - Elements are :Copy so it's OK to to copy them, without doing
```
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add unicode fast path to `is_printable`
Before, it would enter the full expensive check even for normal ascii characters. Now, it skips the check for the ascii characters in `32..127`. This range was checked manually from the current behavior.
I ran the `tracing` test suite in miri, and it was really slow. I looked at a profile, and miri spent most of the time in `core::char::methods::escape_debug_ext`, where half of that was dominated by `core::unicode::printable::is_printable`. So I optimized it here.
The tracing profile:
Before, it would enter the full expensive check even for normal ascii
characters. Now, it skips the check for the ascii characters in
`32..127`. This range was checked manually from the current behavior.
Rollup of 6 pull requests
Successful merges:
- #97089 (Improve settings theme display)
- #97229 (Document the current aliasing rules for `Box<T>`.)
- #97371 (Suggest adding a semicolon to a closure without block)
- #97455 (Stabilize `toowned_clone_into`)
- #97565 (Add doc alias `memset` to `write_bytes`)
- #97569 (Remove `memset` alias from `fill_with`.)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Add doc alias `memset` to `write_bytes`
I were looking for `memset` in rust, but the docs only pointed me to `slice::fill`.
With only the old aliases, one might write code like this, which is incorrect if the memory is uninitialized.
``` Rust
core::slice::from_raw_parts(ptr, len).fill(0)
```
Document the current aliasing rules for `Box<T>`.
Currently, `Box<T>` gets `noalias`, meaning it has the same rules as `&mut T`. This is sparsely documented, even though it can have quite a big impact on unsafe code using box. Therefore, these rules are documented here, with a big warning that they are not normative and subject to change, since we have not yet committed to an aliasing model and the state of `Box<T>` is especially uncertain.
If you have any suggestions and improvements, make sure to leave them here. This is mostly intended to inform people about what is currently going on (to prevent misunderstandings such as [Jon Gjengset's Box aliasing](https://www.youtube.com/watch?v=EY7Wi9fV5bk)).
This is supposed to _only document current UB_ and not add any new guarantees or rules.
Implement [OsStr]::join
Implements join for `OsStr` and `OsString` slices:
```Rust
let strings = [OsStr::new("hello"), OsStr::new("dear"), OsStr::new("world")];
assert_eq!("hello dear world", strings.join(OsStr::new(" ")));
````
This saves one from converting to strings and back, or from implementing it manually.
This PR has been re-filed after #96744 was first accidentally merged and then reverted.
The change is instantly stable and thus:
r? rust-lang/libs-api `@rustbot` label +T-libs-api -T-libs
cc `@thomcc` `@m-ou-se` `@faptc`
Rollup of 6 pull requests
Successful merges:
- #89685 (refactor: VecDeques Iter fields to private)
- #97172 (Optimize the diagnostic generation for `extern unsafe`)
- #97395 (Miri call ABI check: ensure type size+align stay the same)
- #97431 (don't do `Sized` and other return type checks on RPIT's real type)
- #97555 (Source code page: line number click adds `NaN`)
- #97558 (Fix typos in comment)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Source code page: line number click adds `NaN`
When you click on the parent element of the line numbers in the source code pages, it'll add `NaN` (like in https://doc.rust-lang.org/nightly/src/alloc/lib.rs.html#NaN). This PR fixes this bug.
cc ``@jsha``
r? ``@notriddle``
don't do `Sized` and other return type checks on RPIT's real type
Fixes an ICE where we're doing `Sized` check against the RPIT's real type, instead of against the opaque type. This differs from what we're doing in MIR typeck, which causes ICE #97226.
This regressed in #96516 -- this adjusts that fix to be a bit more conservative. That PR was backported and thus the ICE is also present in stable. Not sure if it's worth to beta and/or stable backport, probably not the latter but I could believe the former.
r? `@oli-obk`
cc: another attempt to fix this ICE #97413. I believe this PR addresses the root cause.
Miri call ABI check: ensure type size+align stay the same
We should almost certainly not accept calls where caller and callee disagree on the size or alignment of the type.
The checks we do *almost* imply that, except that `ScalarPair` types can have `repr(align)` and thus differ in size/align even when they are pairs of the same primitive type.
r? ``@oli-obk``
Optimize the diagnostic generation for `extern unsafe`
This PR does the following about diagnostic generation when parsing foreign mod:
1. Fixes the FIXME about avoiding depending on the error message text.
2. Continue parsing when `unsafe` is followed by `{` (just like `unsafe extern {...}`).
3. Add test case.
refactor: VecDeques Iter fields to private
Made the fields of VecDeque's Iter private by creating a Iter::new(...) function to create a new instance of Iter and migrating usage to use Iter::new(...).
errors: simplify referring to fluent attributes
To render the message of a Fluent attribute, the identifier of the Fluent message must be known. `DiagnosticMessage::FluentIdentifier` contains both the message's identifier and optionally the identifier of an attribute. Generated constants for each attribute would therefore need to be named uniquely (amongst all error messages) or be able to refer to only the attribute identifier which will be combined with a message identifier later. In this commit, the latter strategy is implemented as part of the `Diagnostic` type's functions for adding subdiagnostics of various kinds.
r? `@oli-obk`
Add validation layer for Derefer
_Follow up work to #96549#96116#95857 #95649_
This adds validation for Derefer making sure it is always the first projection.
r? rust-lang/mir-opt
improve format impl for literals
The basic idea of this change can be seen here https://godbolt.org/z/MT37cWoe1.
Updates the format impl to have a fast path for string literals and the default path for regular format args.
This change will allow `format!("string literal")` to be used interchangably with `"string literal".to_owned()`.
This would be relevant in the case of `f!"string literal"` being legal (https://github.com/rust-lang/rfcs/pull/3267) in which case it would be the easiest way to create owned strings from literals, while also being just as efficient as any other impl
To render the message of a Fluent attribute, the identifier of the
Fluent message must be known. `DiagnosticMessage::FluentIdentifier`
contains both the message's identifier and optionally the identifier of
an attribute. Generated constants for each attribute would therefore
need to be named uniquely (amongst all error messages) or be able to
refer to only the attribute identifier which will be combined with a
message identifier later. In this commit, the latter strategy is
implemented as part of the `Diagnostic` type's functions for adding
subdiagnostics of various kinds.
Signed-off-by: David Wood <david.wood@huawei.com>
Re-add help_on_error for download-ci-llvm
Closes#97503
- Re-added `help_on_error` for `download_component()` and the downstream functions
- Removed dead code in `bootstrap.py`
Thanks `@jyn514` for the helpful tips!
(first contribution here, please let me know if I missed anything out!)
Ensure source file present when calculating max line number
Resubmission of #89268, fixes#71363
The behavior difference of `simulate-remapped-rust-src-base` is not something we should take into account here, so limiting targets to run the test makes sense, I think.
r? `@davidtwco,` and `@estebank,` you might be interested in this change
Remove "sys isn't exported yet" phrase
The oldest occurence is from 9e224c2bf1,
which is from the pre-1.0 days. In the years since then, std::sys still
hasn't been exported, and the last attempt was met with strong criticism:
https://github.com/rust-lang/rust/pull/97151
Thus, removing the "yet" part makes a lot of sense.
