This should have no real effect in most cases, as e.g. `hidden`
visibility already implies `dso_local` (or at least LLVM IR does not
preserve the `dso_local` setting if the item is already `hidden`), but
it should fix `-Crelocation-model=static` and improve codegen in
executables.
Note that this PR does not exhaustively port the logic in [clang]. Only
the obviously correct portion and what is necessary to fix a regression
from LLVM 12 that relates to `-Crelocation_model=static`.
Fixes#83335
[clang]: 3001d080c8/clang/lib/CodeGen/CodeGenModule.cpp (L945-L1039)
THis came up in the review of #83425: it's hard to imagine a use of
LLVM_VERSION_LE() or LLVM_VERSION_EQ() that's not asking for trouble
when a point release gets created, so let's just discard them to prevent
the issue.
As far as I can tell what we've been getting is llvm::MaybeAlign(), so
just use that for now. This is required sometime after
24539f1ef2471d07bd87f833cb0288fc0f251f4b.
This changed in 54fb3ca96e261f7107cb1b5778c34cb0e0808be6 - I'm not
entirely sure it's correct that we're leaving config empty, but the one
case in LLVM that looked similar did that.
This works around a design defect in the LLVM 12 pass builder
implementation. In LLVM 13, the PreLink ThinLTO pipeline properly
respects the OptimizerLastEPCallbacks.
The definition of this struct changes in LLVM 12 due to the addition
of branch coverage support. To avoid future mismatches, declare our
own struct and then convert between them.
This commit adds a new ABI to be selected via `extern
"C-cmse-nonsecure-call"` on function pointers in order for the compiler to
apply the corresponding cmse_nonsecure_call callsite attribute.
For Armv8-M targets supporting TrustZone-M, this will perform a
non-secure function call by saving, clearing and calling a non-secure
function pointer using the BLXNS instruction.
See the page on the unstable book for details.
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
This commit modifies the FFI bindings to LLVM required for Split DWARF
support in rustc. In particular:
- `addPassesToEmitFile`'s wrapper, `LLVMRustWriteOutputFile` now takes
a `DwoPath` `const char*`. When disabled, `nullptr` should be provided
which will preserve existing behaviour. When enabled, the path to the
`.dwo` file should be provided.
- `createCompileUnit`'s wrapper, `LLVMRustDIBuilderCreateCompileUnit`
now has two additional arguments, for the `DWOId` and to enable
`SplitDebugInlining`. `DWOId` should always be zero.
- `createTargetMachine`'s wrapper, `LLVMRustCreateTargetMachine` has an
additional argument which should be provided the path to the `.dwo`
when enabled.
Signed-off-by: David Wood <david@davidtw.co>
* `rustc` should now compile under LLVM 9 or 10
* Compiler generates an error if `-Z instrument-coverage` is specified
but LLVM version is less than 11
* Coverage tests that require `-Z instrument-coverage` and run codegen
should be skipped if LLVM version is less than 11
Changes the coverage map injected into binaries compiled with
`-Zinstrument-coverage` to LLVM Coverage Mapping Format, Version 4 (from
Version 3). Note, binaries compiled with this version will require LLVM
tools from at least LLVM Version 11.
This commit grepped for LLVM_VERSION_GE, LLVM_VERSION_LT, get_major_version and
min-llvm-version and statically evaluated every expression possible
(and sensible) assuming that the LLVM version is >=9 now
Add support for SHA256 source file hashing
Adds support for `-Z src-hash-algorithm sha256`, which became available in LLVM 11.
Using an older version of LLVM will cause an error `invalid checksum kind` if the hash algorithm is set to sha256.
r? `@eddyb`
cc #70401 `@est31`
rustc_llvm: unwrap LLVMMetadataRef before casting
Directly casting the opaque pointer was [reported] to cause an
"incomplete type" error with GCC 9.3:
```
llvm-wrapper/RustWrapper.cpp:939:31: required from here
/usr/include/c++/9.3/type_traits:1301:12: error: invalid use of incomplete type 'struct LLVMOpaqueMetadata'
1301 | struct is_base_of
| ^~~~~~~~~~
In file included from [...]/rust/src/llvm-project/llvm/include/llvm-c/BitReader.h:23,
from llvm-wrapper/LLVMWrapper.h:1,
from llvm-wrapper/RustWrapper.cpp:1:
[...]/rust/src/llvm-project/llvm/include/llvm-c/Types.h:89:16: note: forward declaration of 'struct LLVMOpaqueMetadata'
89 | typedef struct LLVMOpaqueMetadata *LLVMMetadataRef;
| ^~~~~~~~~~~~~~~~~~
```
[reported]: https://zulip-archive.rust-lang.org/182449tcompilerhelp/12215halprustcllvmbuildfail.html#214915124
A simple `unwrap` fixes the issue.
r? `@eddyb`
Directly casting the opaque pointer was [reported] to cause an
"incomplete type" error with GCC 9.3:
```
llvm-wrapper/RustWrapper.cpp:939:31: required from here
/usr/include/c++/9.3/type_traits:1301:12: error: invalid use of incomplete type 'struct LLVMOpaqueMetadata'
1301 | struct is_base_of
| ^~~~~~~~~~
In file included from [...]/rust/src/llvm-project/llvm/include/llvm-c/BitReader.h:23,
from llvm-wrapper/LLVMWrapper.h:1,
from llvm-wrapper/RustWrapper.cpp:1:
[...]/rust/src/llvm-project/llvm/include/llvm-c/Types.h:89:16: note: forward declaration of 'struct LLVMOpaqueMetadata'
89 | typedef struct LLVMOpaqueMetadata *LLVMMetadataRef;
| ^~~~~~~~~~~~~~~~~~
```
[reported]: https://zulip-archive.rust-lang.org/182449tcompilerhelp/12215halprustcllvmbuildfail.html#214915124
A simple `unwrap` fixes the issue.
Use unwrapDIPtr because the Scope may be null.
I ran into an assertion when using debug information on Windows with LLVM assertions enabled.
It seems like we are using unwrap here (which in turn calls isa and requires the pointer to be non-null) but we expect the value to be null because that is what we are passing from rustc.
This change uses unwrapDIPtr which explicitly allows nullptr.
The FFI prototype for this method on the rust side has the `LLVMMetadataRef` parameter as `Scope: Option<&'a DIScope>`, and we always pass `None` when `msvc_like_names` is true.
Use llvm::computeLTOCacheKey to determine post-ThinLTO CGU reuse
During incremental ThinLTO compilation, we attempt to re-use the
optimized (post-ThinLTO) bitcode file for a module if it is 'safe' to do
so.
Up until now, 'safe' has meant that the set of modules that our current
modules imports from/exports to is unchanged from the previous
compilation session. See PR #67020 and PR #71131 for more details.
However, this turns out be insufficient to guarantee that it's safe
to reuse the post-LTO module (i.e. that optimizing the pre-LTO module
would produce the same result). When LLVM optimizes a module during
ThinLTO, it may look at other information from the 'module index', such
as whether a (non-imported!) global variable is used. If this
information changes between compilation runs, we may end up re-using an
optimized module that (for example) had dead-code elimination run on a
function that is now used by another module.
Fortunately, LLVM implements its own ThinLTO module cache, which is used
when ThinLTO is performed by a linker plugin (e.g. when clang is used to
compile a C proect). Using this cache directly would require extensive
refactoring of our code - but fortunately for us, LLVM provides a
function that does exactly what we need.
The function `llvm::computeLTOCacheKey` is used to compute a SHA-1 hash
from all data that might influence the result of ThinLTO on a module.
In addition to the module imports/exports that we manually track, it
also hashes information about global variables (e.g. their liveness)
which might be used during optimization. By using this function, we
shouldn't have to worry about new LLVM passes breaking our module re-use
behavior.
In LLVM, the output of this function forms part of the filename used to
store the post-ThinLTO module. To keep our current filename structure
intact, this PR just writes out the mapping 'CGU name -> Hash' to a
file. To determine if a post-LTO module should be reused, we compare
hashes from the previous session.
This should unblock PR #75199 - by sheer chance, it seems to have hit
this issue due to the particular CGU partitioning and optimization
decisions that end up getting made.
Secure entry functions do not support if arguments are passed on the
stack. An "unsupported" diagnostic will be emitted by LLVM if that is
the case.
This commits adds support in Rust for that diagnostic so that an error
will be output if that is the case!
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
During incremental ThinLTO compilation, we attempt to re-use the
optimized (post-ThinLTO) bitcode file for a module if it is 'safe' to do
so.
Up until now, 'safe' has meant that the set of modules that our current
modules imports from/exports to is unchanged from the previous
compilation session. See PR #67020 and PR #71131 for more details.
However, this turns out be insufficient to guarantee that it's safe
to reuse the post-LTO module (i.e. that optimizing the pre-LTO module
would produce the same result). When LLVM optimizes a module during
ThinLTO, it may look at other information from the 'module index', such
as whether a (non-imported!) global variable is used. If this
information changes between compilation runs, we may end up re-using an
optimized module that (for example) had dead-code elimination run on a
function that is now used by another module.
Fortunately, LLVM implements its own ThinLTO module cache, which is used
when ThinLTO is performed by a linker plugin (e.g. when clang is used to
compile a C proect). Using this cache directly would require extensive
refactoring of our code - but fortunately for us, LLVM provides a
function that does exactly what we need.
The function `llvm::computeLTOCacheKey` is used to compute a SHA-1 hash
from all data that might influence the result of ThinLTO on a module.
In addition to the module imports/exports that we manually track, it
also hashes information about global variables (e.g. their liveness)
which might be used during optimization. By using this function, we
shouldn't have to worry about new LLVM passes breaking our module re-use
behavior.
In LLVM, the output of this function forms part of the filename used to
store the post-ThinLTO module. To keep our current filename structure
intact, this PR just writes out the mapping 'CGU name -> Hash' to a
file. To determine if a post-LTO module should be reused, we compare
hashes from the previous session.
This should unblock PR #75199 - by sheer chance, it seems to have hit
this issue due to the particular CGU partitioning and optimization
decisions that end up getting made.
