compiletest: split rmake.rs executable from scratch directory
When implementing support for rmake.rs, I copied over the `$TMPDIR` directory logic from the legacy Makefile setup. In doing so, I also compiled recipe `rmake.rs` into executables which unfortunately are placed into `$TMPDIR` as well.
This causes a problem on Windows (as observed in PRs like https://github.com/rust-lang/rust/pull/125752#issuecomment-2142577084) where:
- The `rmake.exe` executable is placed in `$TMPDIR`.
- We run the `rmake.exe` as a process.
- The process uses `rmake.exe` inside `$TMPDIR`.
- Windows prevents the .exe file from being deleted when the process is still alive.
- The recipe test code tries to `remove_dir_all($TMPDIR)`, which fails with access denied because `rmake.exe` is still being used.
We fix this by separating the recipe executable and the output artifacts directory:
```
base_dir/
rmake.exe
rmake_out/
```
We construct a base directory, unique to each run-make test, under which we place rmake.exe alongside a `rmake_out/` directory. This `rmake_out/` directory is what is passed to rmake.rs tests as `$TMPDIR`, so now `remove_dir_all($TMPDIR)` has a chance to succeed because it no longer contains `rmake.exe`.
This wasn't a problem for Makefile tests because there's no exe file under `$TMPDIR` whose process is still running when `rm -rf $TMPDIR` is called.
try-job: x86_64-msvc
Inside #123865, we are adding support for the new semantics
for expr2024, but we have noted a performance issue.
We realized there is a redundant check for each
token regarding an edition. This commit moves the edition
check to the end, avoiding some extra checks that
can slow down compilation time.
Link: https://github.com/rust-lang/rust/pull/123865
Co-Developed-by: @eholk
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
When implementing support for rmake.rs, I copied over the `$TMPDIR`
directory logic from the legacy Makefile setup. In doing so, I also
compiled recipe `rmake.rs` into executables which unfortunately are
placed into `$TMPDIR` as well.
This causes a problem on Windows where:
- The `rmake.exe` executable is placed in `$TMPDIR`.
- We run the `rmake.exe` as a process.
- The process uses `rmake.exe` inside `$TMPDIR`.
- Windows prevents the .exe file from being deleted when the process
is still alive.
- The recipe test code tries to `remove_dir_all($TMPDIR)`, which fails
with access denied because `rmake.exe` is still being used.
We fix this by separating the recipe executable and the sratch
directory:
```
base_dir/
rmake.exe
scratch/
```
We construct a base directory, unique to each run-make test, under
which we place rmake.exe alongside a `scratch/` directory. This
`scratch/` directory is what is passed to rmake.rs tests as `$TMPDIR`,
so now `remove_dir_all($TMPDIR)` has a chance to succeed because
it no longer contains `rmake.exe`.
Oops. This was a fun one to try figure out.
This has been verified by kani as a correct optimization
see: https://github.com/rust-lang/rust/issues/110840#issuecomment-1942587398
The new implementation is branchless, and only differs in which NaN
values are produced (if any are produced at all). Which is fine to change.
Aside from NaN handling, this implementation produces bitwise identical
results to the original implementation.
The new implementation is gated on targets that have a fast 64-bit
floating point implementation in hardware, and on WASM.
Unroll first iteration of checked_ilog loop
This follows the optimization of #115913. As shown in https://github.com/rust-lang/rust/pull/115913#issuecomment-2066788006, the performance was improved in all important cases, but some regressions were introduced for the benchmarks `u32_log_random_small`, `u8_log_random` and `u8_log_random_small`.
Basically, #115913 changed the implementation from one division per iteration to one multiplication per iteration plus one division. When there are zero iterations, this is a regression from zero divisions to one division.
This PR avoids this by avoiding the division if we need zero iterations by returning `Some(0)` early. It also reduces the number of multiplications by one in all other cases.
Reject `CVarArgs` in `parse_ty_for_where_clause`
Fixes#125847. This regressed in #77035 where the `parse_ty` inside `parse_ty_where_predicate` was replaced with the at the time new `parse_ty_for_where_clause` which incorrectly stated it would permit CVarArgs (maybe a copy/paste error).
r? parser
Uplift `{Closure,Coroutine,CoroutineClosure}Args` and friends to `rustc_type_ir`
Part of converting the new solver's `structural_traits.rs` to be interner-agnostic.
I decided against aliasing `ClosureArgs<TyCtxt<'tcx>>` to `ClosureArgs<'tcx>` because it seemed so rare. I could do so if desired, though.
r? lcnr
include missing submodule on bootstrap
As of https://github.com/rust-lang/rust/pull/125408 PR, rustbook now relies on dependencies from the "src/doc/book" submodule.
However, bootstrap does not automatically sync this submodule before reading metadata informations. And if the submodule is not present, reading metadata will fail because rustbook's dependencies will be missing.
This change makes "src/doc/book" to be fetched/synced automatically before trying to read metadata.
cc `@Zalathar`
As of https://github.com/rust-lang/rust/pull/125408 PR,
rustbook now relies on dependencies from the "src/doc/book" submodule.
However, bootstrap does not automatically sync this submodule before reading
metadata informations. And if the submodule is not present, reading
metadata will fail because rustbook's dependencies will be missing.
This change makes "src/doc/book" to be fetched/synced automatically
before trying to read metadata.
Signed-off-by: onur-ozkan <work@onurozkan.dev>
fix diagnostics clearing when flychecks run per-workspace
This might be causing #17300 or it's a different bug with the same functionality.
I wonder if the decision to clear diagnostics should stay in the main loop or maybe the flycheck itself should track it and tell the mainloop?
I have used a hash map but we could just as well use a vector since the IDs are `usizes` in some given range starting at 0. It would be probably faster but this just felt a bit cleaner and it allows us to change the ID to newtype later and we can just use a hasher that returns the underlying integer.
Check index `value <= 0xFFFF_FF00`
<!--
If this PR is related to an unstable feature or an otherwise tracked effort,
please link to the relevant tracking issue here. If you don't know of a related
tracking issue or there are none, feel free to ignore this.
This PR will get automatically assigned to a reviewer. In case you would like
a specific user to review your work, you can assign it to them by using
r? <reviewer name>
-->
fixes#121126
check `idx <= FieldIdx::MAX_AS_U32` before calling `FieldIdx::from_u32` to avoid panic.
Stabilize `custom_code_classes_in_docs` feature
Fixes#79483.
This feature has been around for quite some time now, I think it's fine to stabilize it now.
## Summary
## What is the feature about?
In short, this PR changes two things, both related to codeblocks in doc comments in Rust documentation:
* Allow to disable generation of `language-*` CSS classes with the `custom` attribute.
* Add your own CSS classes to a code block so that you can use other tools to highlight them.
#### The `custom` attribute
Let's start with the new `custom` attribute: it will disable the generation of the `language-*` CSS class on the generated HTML code block. For example:
```rust
/// ```custom,c
/// int main(void) {
/// return 0;
/// }
/// ```
```
The generated HTML code block will not have `class="language-c"` because the `custom` attribute has been set. The `custom` attribute becomes especially useful with the other thing added by this feature: adding your own CSS classes.
#### Adding your own CSS classes
The second part of this feature is to allow users to add CSS classes themselves so that they can then add a JS library which will do it (like `highlight.js` or `prism.js`), allowing to support highlighting for other languages than Rust without increasing burden on rustdoc. To disable the automatic `language-*` CSS class generation, you need to use the `custom` attribute as well.
This allow users to write the following:
```rust
/// Some code block with `{class=language-c}` as the language string.
///
/// ```custom,{class=language-c}
/// int main(void) {
/// return 0;
/// }
/// ```
fn main() {}
```
This will notably produce the following HTML:
```html
<pre class="language-c">
int main(void) {
return 0;
}</pre>
```
Instead of:
```html
<pre class="rust rust-example-rendered">
<span class="ident">int</span> <span class="ident">main</span>(<span class="ident">void</span>) {
<span class="kw">return</span> <span class="number">0</span>;
}
</pre>
```
To be noted, we could have written `{.language-c}` to achieve the same result. `.` and `class=` have the same effect.
One last syntax point: content between parens (`(like this)`) is now considered as comment and is not taken into account at all.
In addition to this, I added an `unknown` field into `LangString` (the parsed code block "attribute") because of cases like this:
```rust
/// ```custom,class:language-c
/// main;
/// ```
pub fn foo() {}
```
Without this `unknown` field, it would generate in the DOM: `<pre class="language-class:language-c language-c">`, which is quite bad. So instead, it now stores all unknown tags into the `unknown` field and use the first one as "language". So in this case, since there is no unknown tag, it'll simply generate `<pre class="language-c">`. I added tests to cover this.
EDIT(camelid): This description is out-of-date. Using `custom,class:language-c` will generate the output `<pre class="language-class:language-c">` as would be expected; it treats `class:language-c` as just the name of a language (similar to the langstring `c` or `js` or what have you) since it does not use the designed class syntax.
Finally, I added a parser for the codeblock attributes to make it much easier to maintain. It'll be pretty easy to extend.
As to why this syntax for adding attributes was picked: it's [Pandoc's syntax](https://pandoc.org/MANUAL.html#extension-fenced_code_attributes). Even if it seems clunkier in some cases, it's extensible, and most third-party Markdown renderers are smart enough to ignore Pandoc's brace-delimited attributes (from [this comment](https://github.com/rust-lang/rust/pull/110800#issuecomment-1522044456)).
r? `@notriddle`
Stablize `const_binary_heap_constructor`
This pr aims to stablize `const_binary_heap_constructor`.
`BinaryHeap::new` is able to be stablized, but `BinaryHeap::new_in` is not. Because the latter depends on `Vec::new_in` which is unstable.
The `const_binary_heap_constructor` feature contains the two functions, and I want to split this feature now. This pr creates `const_binary_heap_new_in` feature for `BinaryHeap::new_in` and stablizes `const_binary_heap_constructor` (now this original feature only contains one function).
Update cargo
9 commits in 431db31d0dbeda320caf8ef8535ea48eb3093407..7a6fad0984d28c8330974636972aa296b67c4513
2024-05-28 18:17:31 +0000 to 2024-05-31 22:26:03 +0000
- fix(config): Ensure `--config net.git-fetch-with-cli=true` is respected (rust-lang/cargo#13992)
- Fix libcurl proxy documentation link (rust-lang/cargo#13990)
- fix(new): Dont say were adding to a workspace when a regular package is in root (rust-lang/cargo#13987)
- fix: adjust custom err from cert-check due to libgit2 1.8 change (rust-lang/cargo#13970)
- fix(toml): Ensure targets are in a deterministic order (rust-lang/cargo#13989)
- doc(cargo-package): explain no guarantee of vcs provenance (rust-lang/cargo#13984)
- chore: fix some comments (rust-lang/cargo#13982)
- feat: stabilize `cargo update --precise <yanked>` (rust-lang/cargo#13974)
- Update openssl-src to 111.28.2+1.1.1w (rust-lang/cargo#13976)
r? ghost
Support mdBook preprocessors for TRPL in rustbook
`rust-lang/book` recently added two mdBook preprocessors. Enable `rustbook` to use those preprocessors for books where they are requested by the `book.toml` by adding the preprocessors as path dependencies, and ignoring them where they are not requested, i.e. by all the books other than TRPL at present.
Addresses rust-lang/book#3927
Rollup of 7 pull requests
Successful merges:
- #125652 (Revert propagation of drop-live information from Polonius)
- #125730 (Apply `x clippy --fix` and `x fmt` on Rustc)
- #125756 (coverage: Optionally instrument the RHS of lazy logical operators)
- #125776 (Stop using `translate_args` in the new solver)
- #125796 (Also InstSimplify `&raw*`)
- #125807 (Also resolve the type of constants, even if we already turned it into an error constant)
- #125816 (Don't build the `rust-demangler` binary for coverage tests)
r? `@ghost`
`@rustbot` modify labels: rollup
Don't build the `rust-demangler` binary for coverage tests
The coverage-run tests invoke `llvm-cov`, which requires us to specify a command-line demangler that it can use to demangle Rust symbol names.
Historically this used `src/tools/rust-demangler`, which means that we currently build two different command-line tools to help with the coverage tests (`rust-demangler` and `coverage-dump`).
However, it occurred to me that if we add a demangler mode to `coverage-dump` (which is only a handful of lines and no extra dependencies), then we only need to build one helper binary for the coverage tests, and there is no need for tests to build `rust-demangler` at all.
---
Note that the `rust-demangler` binary is separate from the `rustc-demangle` crate (which both `rust-demangler` and `coverage-dump` use as a dependency to do the actual demangling).
---
So the main benefits/motivations here are:
- Slightly faster builds after a fresh checkout or bootstrap bump.
- Making it clear that currently no tests actually need the `rust-demangler` binary, since the coverage tests can use their own tool instead.
Also resolve the type of constants, even if we already turned it into an error constant
error constants can still have arbitrary types, and in this case it was turned into an error constant because there was an infer var in the *type* not the *const*.
fixes#125760
Stop using `translate_args` in the new solver
It was unnecessary and also sketchy, since it was doing an out-of-search-graph fulfillment loop. Added a test for the only really minor subtlety of translating args, though not sure if it was being tested before, though I wouldn't be surprised if it wasn't.
r? lcnr
coverage: Optionally instrument the RHS of lazy logical operators
(This is an updated version of #124644 and #124402. Fixes #124120.)
When `||` or `&&` is used outside of a branching context (such as the condition of an `if`), the rightmost value does not directly influence any branching decision, so branch coverage instrumentation does not treat it as its own true-or-false branch.
That is a correct and useful interpretation of “branch coverage”, but might be undesirable in some contexts, as described at #124120. This PR therefore adds a new coverage level `-Zcoverage-options=condition` that behaves like branch coverage, but also adds additional branch instrumentation to the right-hand-side of lazy boolean operators.
---
As discussed at https://github.com/rust-lang/rust/issues/124120#issuecomment-2092394586, this is mainly intended as an intermediate step towards fully-featured MC/DC instrumentation. It's likely that we'll eventually want to remove this coverage level (rather than stabilize it), either because it has been incorporated into MC/DC instrumentation, or because it's getting in the way of future MC/DC work. The main appeal of landing it now is so that work on tracking conditions can proceed concurrently with other MC/DC-related work.
````@rustbot```` label +A-code-coverage
Apply `x clippy --fix` and `x fmt` on Rustc
<!--
If this PR is related to an unstable feature or an otherwise tracked effort,
please link to the relevant tracking issue here. If you don't know of a related
tracking issue or there are none, feel free to ignore this.
This PR will get automatically assigned to a reviewer. In case you would like
a specific user to review your work, you can assign it to them by using
r? <reviewer name>
-->
Just run `x clippy --fix` and `x fmt`, and remove some changes like `impl Default`.
