Add `Unsupported` to `std::io::ErrorKind`
I noticed a significant portion of the uses of `ErrorKind::Other` in std is for unsupported operations.
The notion that a specific operation is not available on a target (and will thus never succeed) seems semantically distinct enough from just "an unspecified error occurred", which is why I am proposing to add the variant `Unsupported` to `std::io::ErrorKind`.
**Implementation**:
The following variant will be added to `std::io::ErrorKind`:
```rust
/// This operation is unsupported on this platform.
Unsupported
```
`std::io::ErrorKind::Unsupported` is an error returned when a given operation is not supported on a platform, and will thus never succeed; there is no way for the software to recover. It will be used instead of `Other` where appropriate, e.g. on wasm for file and network operations.
`decode_error_kind` will be updated to decode operating system errors to `Unsupported`:
- Unix and VxWorks: `libc::ENOSYS`
- Windows: `c::ERROR_CALL_NOT_IMPLEMENTED`
- WASI: `wasi::ERRNO_NOSYS`
**Stability**:
This changes the kind of error returned by some functions on some platforms, which I think is not covered by the stability guarantees of the std? User code could depend on this behavior, expecting `ErrorKind::Other`, however the docs already mention:
> Errors that are `Other` now may move to a different or a new `ErrorKind` variant in the future. It is not recommended to match an error against `Other` and to expect any additional characteristics, e.g., a specific `Error::raw_os_error` return value.
The most recent variant added to `ErrorKind` was `UnexpectedEof` in `1.6.0` (almost 5 years ago), but `ErrorKind` is marked as `#[non_exhaustive]` and the docs warn about exhaustively matching on it, so adding a new variant per se should not be a breaking change.
The variant `Unsupported` itself could be marked as `#[unstable]`, however, because this PR also immediately uses this new variant and changes the errors returned by functions I'm inclined to agree with the others in this thread that the variant should be insta-stabilized.
Deprecate the core::raw / std::raw module
It only contains the `TraitObject` struct which exposes components of wide pointer. Pointer metadata APIs are designed to replace this: https://github.com/rust-lang/rust/issues/81513
Add some #[inline(always)] to arithmetic methods of integers
I tried to add it only to methods which return results of intrinsics and don't have any branching.
Branching could made performance of debug builds (`-Copt-level=0`) worse.
Main goal of changes is allowing wider optimizations in `-Copt-level=1`.
Closes: https://github.com/rust-lang/rust/issues/75598
r? `@nagisa`
No compiler changes as part of this -- just new unstable traits and impls thereof.
The goal here is to add the things that aren't going to break anything, to keep the feature implementation simpler in the next PR.
std: Add a variant of thread locals with const init
This commit adds a variant of the `thread_local!` macro as a new
`thread_local_const_init!` macro which requires that the initialization
expression is constant (e.g. could be stuck into a `const` if so
desired). This form of thread local allows for a more efficient
implementation of `LocalKey::with` both if the value has a destructor
and if it doesn't. If the value doesn't have a destructor then `with`
should desugar to exactly as-if you use `#[thread_local]` given
sufficient inlining.
The purpose of this new form of thread locals is to precisely be
equivalent to `#[thread_local]` on platforms where possible for values
which fit the bill (those without destructors). This should help close
the gap in performance between `thread_local!`, which is safe, relative
to `#[thread_local]`, which is not easy to use in a portable fashion.
This commit adds a variant of the `thread_local!` macro as a new
`thread_local_const_init!` macro which requires that the initialization
expression is constant (e.g. could be stuck into a `const` if so
desired). This form of thread local allows for a more efficient
implementation of `LocalKey::with` both if the value has a destructor
and if it doesn't. If the value doesn't have a destructor then `with`
should desugar to exactly as-if you use `#[thread_local]` given
sufficient inlining.
The purpose of this new form of thread locals is to precisely be
equivalent to `#[thread_local]` on platforms where possible for values
which fit the bill (those without destructors). This should help close
the gap in performance between `thread_local!`, which is safe, relative
to `#[thread_local]`, which is not easy to use in a portable fashion.
Fix join_paths error display.
On unix, the error from `join_paths` looked like this:
```
path segment contains separator `58`
```
This PR changes it to look like this:
```
path segment contains separator `:`
```
Move `std::sys_common::alloc` to new module `std::sys::common`
6b56603e35/library/std/src/sys_common/mod.rs (L7-L13)
It was my impression that the goal for `std::sys` has changed from extracting it into a separate crate to making std work with features. However the fact remains that there is a lot of interdependence between `sys` and `sys_common`, this is because `sys_common` contains two types of code:
- abstractions over the different platform implementations in `std::sys` (for example [`std::sys_common::mutex`](https://github.com/rust-lang/rust/blob/master/library/std/src/sys_common/mutex.rs))
- code shared between platforms (for example [`std::sys_common::alloc`](https://github.com/rust-lang/rust/blob/master/library/std/src/sys_common/alloc.rs))
This PR attempts to address this by adding a new module `common` to `std::sys` which will contain code shared between platforms, `alloc.rs` in this case but more can be moved over in the future.
add lint deref_nullptr detecting when a null ptr is dereferenced
fixes#83856
changelog: add lint that detect code like
```rust
unsafe {
&*core::ptr::null::<i32>()
};
unsafe {
addr_of!(std::ptr::null::<i32>())
};
let x: i32 = unsafe {*core::ptr::null()};
let x: i32 = unsafe {*core::ptr::null_mut()};
unsafe {*(0 as *const i32)};
unsafe {*(core::ptr::null() as *const i32)};
```
```
warning: Dereferencing a null pointer causes undefined behavior
--> src\main.rs:5:26
|
5 | let x: i32 = unsafe {*core::ptr::null()};
| ^^^^^^^^^^^^^^^^^^
| |
| a null pointer is dereferenced
| this code causes undefined behavior when executed
|
= note: `#[warn(deref_nullptr)]` on by default
```
Limitation:
It does not detect code like
```rust
const ZERO: usize = 0;
unsafe {*(ZERO as *const i32)};
```
or code where `0` is not directly a literal
Improve code example for length comparison
Small fix/improvement: it's much safer to check that you're under the length of an array rather than chacking that you're equal to it. It's even more true in case you update the length of the array while iterating.
Stabilize `bufreader_seek_relative`
This PR marks `BufReader::seek_relative` as stable - the associated issue, #31100, has passed the final comment period without any issues, and from what I understand, the only thing left to stabilize this is to submit a PR marking the method as stable.
Closes#31100.
Turn old edition lint (anonymous-parameters) into warn-by-default on 2015
This makes `anonymous_parameters` <s>and `keyword_idents` </s>warn-by-default on the 2015 edition. I would also like to do this for `absolute_paths_not_starting_with_crate`, but I feel that case is slightly less clear-cut.
Note that this only affects code on the 2015 edition, such code is illegal in future editions anyway.
This was spurred by https://github.com/dtolnay/syn/issues/972: old edition syntax breaks tooling (like syn), and while the tooling should be free to find its balance on how much to support prior editions, it does seem like we should be nudging such code towards the newer edition, and we can do that by turning this Allow lint into a Warn.
In general, I feel like migration lints from an old edition should be made Warn after a year or so, and idiom lints for the new edition should be made Warn after a couple months.
cc `@m-ou-se,` this is for stuff from the 2015-2018 migration but you might be interested.
Update stdarch submodule (to before it switched to const generics)
https://github.com/rust-lang/rust/pull/83278#issuecomment-812389823: This unblocks #82539.
Major changes:
- More AVX-512 intrinsics.
- More ARM & AArch64 NEON intrinsics.
- Updated unstable WASM intrinsics to latest draft standards.
- std_detect is now a separate crate instead of a submodule of std.
I double-checked and the first use of const generics looks like 8d5017861e, which isn't included in this PR.
r? `@Amanieu`
This also includes a cherry-pick of
ec1461905b
and https://github.com/rust-lang/stdarch/pull/1108 to fix a build
failure.
It also adds a re-export of various macros to the crate root of libstd -
previously they would show up automatically because std_detect was defined
in the same crate.
clean up example on read_to_string
This is the same thing, but simpler.
This came out of a comment from a user: https://news.ycombinator.com/item?id=25318117 but rather than hide the signature of main, I think a `use` plus not including the `'static` makes more sense.
Bump libc dependency of std to 0.2.93
Update `libc` dependency of `std` to the latest version. That allows to consume the https://github.com/rust-lang/libc/pull/2131 fix and fix build for the `mipsel-unknown-linux-uclibc` target.
r? `@JohnTitor`
I tried to add it only to methods which return results of intrinsics and don't have any branching.
Branching could made performance of debug builds (`-Copt-level=0`) worse.
Main goal of changes is allowing wider optimizations in `-Copt-level=1`.
Closes: https://github.com/rust-lang/rust/issues/75598
Add note about reverting a workaround in the future
The root cause was fixed upstream in LLVM main. This adds a reminder to revert the workaround once the LLVM rustc depends on is new enough. Since I'm not sure how such optimizations get routed to LLVM releases, I used the conservative assumption that it will only show up with LLVM 13.
fix incorrect Box::from_raw_in doctest
Now that Miri can run doctests, I ran it on liballoc, and found exactly one problem: this test creates a `Box<u8>` to deallocate a 4-byte allocation!
Introduced by https://github.com/rust-lang/rust/pull/80310 so r? `@Manishearth` `@kennytm`
The root cause was fixed upstream in LLVM main. This adds a reminder to revert the workaround once the LLVM rustc depends on is new enough. Since I'm not sure how such optimizations get routed to LLVM releases, I used the conservative assumption that it will only show up with LLVM 13.
Stabilize `peekable_peek_mut`
Resolves#78302. Also adds some documentation on `std::iter::Iterator::peekable()` regarding the new method.
The feature was added in #77491 in Nov' 20, which is recently, but the feature seems reasonably small. Never did a stabilization-pr, excuse my ignorance if there is a protocol I'm not aware of.
Improve links in inline code in `core::pin`.
## Context
So I recently opened #80720. That PR uses HTML-based `<code>foo</code>` syntax in place of `` `foo` `` for some inline code. It looks like usage of `<code>` tags in doc comments is without precedent in the standard library, but the HTML-based syntax has an important advantage:
You can write something like
```
<code>[Box]<[Option]\<T>></code>
```
which becomes: <code>[Box]<[Option]\<T>></code>, whereas with ordinary backtick syntax, you cannot create links for a substring of an inline code block.
## Problem
I recalled (from my own experience) that a way to partially work around this limitation is to do something like
```
[`Box`]`<`[`Option`]`<T>>`
```
which looks like this: [`Box`]`<`[`Option`]`<T>>` _(admitted, it looks even worse on GitHub than in `rustdoc`’s CSS)_.
[Box]: https://doc.rust-lang.org/std/boxed/struct.Box.html "Box"
[`Box`]: https://doc.rust-lang.org/std/boxed/struct.Box.html "Box"
[Option]: https://doc.rust-lang.org/std/option/enum.Option.html "Option"
[`Option`]: https://doc.rust-lang.org/std/option/enum.Option.html "Option"
[Pin]: https://doc.rust-lang.org/std/pin/struct.Pin.html "Pin"
[&mut]: https://doc.rust-lang.org/std/primitive.reference.html "mutable reference"
So I searched the standard library and found that e.g. the [std::pin](https://doc.rust-lang.org/std/pin/index.html) module documentation uses this hack/workaround quite a bit, with types like <code>[Pin]<[Box]\<T>></code> or <code>[Pin]<[&mut] T>></code>. Although the way they look like in this sentence is what I would like them to look like, not what they currently look.
### Status Quo
Here’s a screenshot of what it currently looks like:
With a few HTML-style code blocks, we can fix all the spacing issues in the above screenshot that are due usage of this hack/workaround of putting multiple code blocks right next to each other being used.
### after d3915c555e:
There’s still a problem of inconsistency. Especially in a sentence such as
> A [`Pin<P>`][Pin] where `P: Deref` should be considered as a "`P`-style pointer" to _[...]_
looks weird with the variable `P` having different colors (and `Deref` has a different color from before where it was a link, too). Or compare the difference of <code>[Pin]<[Box]\<T>></code> vs [`Box<T>`][Box] where one time the variable is part of the link and the other time it isn’t.
_Note: Color differences show even **more strongly** when the ayu theme is used, while they are a bit less prominent in the light theme than they are in the dark theme, which is the one used for these screenshots._
This is why I’ve added the next commit
### after ceaeb249a3
pulling all the type parameters out of their links, and also the last commit with clearly visible changes
### after 87ac118ba3
where more links are added, removing e.g. the inconsistency with `Deref`’s color in e.g. `P: Deref` that I already mentioned above.
## Discussion
I am aware that this PR may very well be overkill. If for now only the first commit (plus the fix for the `Drop` link in e65385fbfa, the link titles 684edf7a70 as far as they apply, and a few of the line-break changes) are wanted, I can reduce this PR to just those changes. I personally find the rendered result with all these changes very nice though. On the other hand, all these `<code>` tags are not very nice in the source code, I’ll admit.
Perhaps alternative solutions could be preferred, such as `rustdoc` support for merging subsequent inline code blocks so that all the cases that currently use workarounds rendered as [`Box`]`<`[`Option`]`<T>>` automatically become <code>[Box]<[Option]\<T>></code> without any need for further changes. Even in this case, having a properly formatted, better looking example in the standard library docs could help motivate such a change to `rustdoc` by prodiving an example of the expected results and also the already existing alternative (i.e. using `<code>`). On the other hand, `` [`Box`]`<`[`Option`]`<T>>` `` isn’t particularly nice-looking source code either. I’m not even sure if I wouldn’t actually find the version `<code>[Box]<[Option]\<T>></code>` cleaner to read.
`@rustbot` modify labels: T-doc, T-rustdoc
Add more info for common trait resolution and async/await errors
* Suggest `Pin::new`/`Box::new`/`Arc::new`/`Box::pin` in more cases
* Point at `impl` and type defs introducing requirements on E0277
Stabilize cmp_min_max_by
I would like to propose cmp::{min_by, min_by_key, max_by, max_by_key}
for stabilization.
These are relatively simple and seemingly uncontroversial functions and
have been unchanged in unstable for a while now.
Closes: #64460
I would like to propose cmp::{min_by, min_by_key, max_by, max_by_key}
for stabilization.
These are relatively simple and seemingly uncontroversial functions and
have been unchanged in unstable for a while now.
Add strong_count mutation methods to Rc
The corresponding methods were stabilized on `Arc` in #79285 (tracking: #71983). This patch implements and stabilizes identical methods on the `Rc` types as well.
Use `#[inline(always)]` on trivial UnsafeCell methods
UnsafeCell is the standard building block for shared mutable data
structures. UnsafeCell should add zero overhead compared to using raw
pointers directly.
Some reports suggest that debug builds, or even builds at opt-level 1,
may not always be inlining its methods. Mark the methods as
`#[inline(always)]`, since once inlined the methods should result in no
actual code other than field accesses.
Bump bootstrap to 1.52 beta
This includes the standard bump, but also a workaround for new cargo behavior around clearing out the doc directory when the rustdoc version changes.
core: disable `ptr::swap_nonoverlapping_one`'s block optimization on SPIR-V.
SPIR-V primarily supports what it calls the "Logical addressing model" (and AFAIK for graphical shaders it's the only option), and what that implies is that there is no "memory" to uniformly address at some byte/word level, and that you can't really talk about values having a "raw representation" in terms of sequences of bytes. Therefore, the "block"-wise swapping optimization employed by `ptr::swap_nonoverlapping_one` (where a "block" is 32 bytes, currently), is fundamentally incompatible with SPIR-V "memory".
As such, [Rust-GPU](https://github.com/EmbarkStudios/rust-gpu/)'s `rustc_codegen_spirv` backend cannot currently allow the use of `ptr::swap_nonoverlapping_one` - but that comes at a great price, since it's the building block of `mem::{swap,replace}`, and those in turn are used by e.g. `Option::take` and `Range`'s `Iterator` implementation (the latter blocking the use of `for i in 0..n` loops).
There's 4 options I can see in terms of supporting `ptr::swap_nonoverlapping_one` in `rustc_codegen_spirv`:
* legalize the block-wise swap loop back into swapping whole values, for SPIR-V
* this is made borderline impossible by the fact that the size of the state "on the stack" is a block, and has to be expanded back to the appropriate size of the value being swapped, so in practice this would have to effectively pattern-match on the exact shape of the block-wise swapping algorithm, as a roundabout way of "patching `core::ptr` on the fly"
* (**this PR**) disable the block-wise swap optimization altogether when `#[cfg(target_arch = "spirv")`
* I've tested it and it does in fact allow compiling `for i in 0..n` loops, which was my primary motivation
* main downside IMO is the fact that `core` now acknowledges an out-of-tree backend
* as a counterpoint, any attempt to compile Rust to SPIR-V would run into this problem, one way or another
* only enable the block-wise swap optimization on targets where it's been empirically proven to be an improvement
* would avoid any surprises in terms of potentially-broken/inefficient codegen, in general
* however, it may be universally applicable (thanks to caches), even if the optimal block size could differ
* move low-level swapping into an intrinsic, where the backend can choose any optimization approach it wants
* this also has an impact on MIR optimizations (cc ``@rust-lang/wg-mir-opt)`` - which currently cannot hope to make sense of e.g. `Option::take` despite it being effectively `_0 = *_1;` `*_1 = None;` `return;`
* long-term this is my preferred approach, and I can start working on it if that's desired, but I wanted to confirm that this swapping optimization is the final blocker for [Rust-GPU](https://github.com/EmbarkStudios/rust-gpu/) supporting e.g. range `for` loops
r? ``@nagisa`` cc ``@rust-lang/libs``
UnsafeCell is the standard building block for shared mutable data
structures. UnsafeCell should add zero overhead compared to using raw
pointers directly.
Some reports suggest that debug builds, or even builds at opt-level 1,
may not always be inlining its methods. Mark the methods as
`#[inline(always)]`, since once inlined the methods should result in no
actual code other than field accesses.
BTree: move blocks around in node.rs
Without changing any names or implementation, reorder some members:
- Move down the ones defined long ago on the demised `struct Root`, to below the definition of their current host `struct NodeRef`.
- Move up some defined on `struct NodeRef` that are interspersed with those defined on `struct Handle`.
- Move up the `correct_…` methods squeezed between the two flavours of `push`.
- Move the unchecked static downcasts (`cast_to_…`) after the upcasts (`forget_`) and the (weirdly named) dynamic downcasts (`force`).
r? ````@Mark-Simulacrum````
BTree: no longer search arrays twice to check Ord
A possible addition to / partial replacement of #83147: no longer linearly search the upper bound of a range in the initial portion of the keys we already know are below the lower bound.
- Should be faster: fewer key comparisons at the cost of some instructions dealing with offsets
- Makes code a little more complicated.
- No longer detects ill-defined `Ord` implementations, but that wasn't a publicised feature, and was quite incomplete, and was only done in the `range` and `range_mut` methods.
r? `@Mark-Simulacrum`
Document "standard" conventions for error messages
These are currently documented in the API guidelines:
https://rust-lang.github.io/api-guidelines/interoperability.html#error-types-are-meaningful-and-well-behaved-c-good-err
I think it makes sense to uplift this guideline (in a milder form) into
std docs. Printing and producing errors is something that even
non-expert users do frequently, so it is useful to give at least some
indication of what a typical error message looks like.
Fix stack overflow detection on FreeBSD 11.1+
Beginning with FreeBSD 10.4 and 11.1, there is one guard page by
default. And the stack autoresizes, so if Rust allocates its own guard
page, then FreeBSD's will simply move up one page. The best solution is
to just use the OS's guard page.
Fix double-drop in `Vec::from_iter(vec.into_iter())` specialization when items drop during panic
This fixes the double-drop but it leaves a behavioral difference compared to the default implementation intact: In the default implementation the source and the destination vec are separate objects, so they get dropped separately. Here they share an allocation and the latter only exists as a pointer into the former. So if dropping the former panics then this fix will leak more items than the default implementation would. Is this acceptable or should the specialization also mimic the default implementation's drops-during-panic behavior?
Fixes#83618
`@rustbot` label T-libs-impl
Rework `std::sys::windows::alloc`
I came across https://github.com/rust-lang/rust/pull/76676#discussion_r488729990, which points out that there was unsound code in the Windows alloc code, creating a &mut to possibly uninitialized memory. I reworked the code so that that particular issue does not occur anymore, and started adding more documentation and safety comments.
Full list of changes:
- moved and documented the relevant Windows Heap API functions
- refactor `allocate_with_flags` to `allocate` (and remove the other helper functions), which now takes just a `bool` if the memory should be zeroed
- add checks for if `GetProcessHeap` returned null
- add a test that checks if the size and alignment of a `Header` are indeed <= `MIN_ALIGN`
- add `#![deny(unsafe_op_in_unsafe_fn)]` and the necessary unsafe blocks with safety comments
I feel like I may have overdone the documenting, the unsoundness fix is the most important part; I could spit this PR up in separate parts.
Fix comment typo in once.rs
I believe I came across a minor typo in a comment. I am not particularly familiar with this part of the codebase, but I have read the surrounding code as well as the referenced `park` and `unpark` functions, and I believe my proposed change is true to the intended meaning of the comment.
I intentionally tried to keep the change as minimal as possible. If I have the maintainers' permission, I'd also love to add a comma to improve readability as follows: `Luckily ``park`` comes with the guarantee that if it got an ``unpark`` just before on an unparked thread, it does not park.`
Rename `#[doc(spotlight)]` to `#[doc(notable_trait)]`
Fixes#80936.
"spotlight" is not a very specific or self-explaining name.
Additionally, the dialog that it triggers is called "Notable traits".
So, "notable trait" is a better name.
* Rename `#[doc(spotlight)]` to `#[doc(notable_trait)]`
* Rename `#![feature(doc_spotlight)]` to `#![feature(doc_notable_trait)]`
* Update documentation
* Improve documentation
r? `@Manishearth`
Beginning with FreeBSD 10.4 and 11.1, there is one guard page by
default. And the stack autoresizes, so if Rust allocates its own guard
page, then FreeBSD's will simply move up one page. The best solution is
to just use the OS's guard page.
panic early when `TrustedLen` indicates a `length > usize::MAX`
Changes `TrustedLen` specializations to immediately panic when `size_hint().1 == None`.
As far as I can tell this is ~not a change~ a minimal change in observable behavior for anything except ZSTs because the fallback path would go through `extend_desugared()` which tries to `reserve(lower_bound)` which already is `usize::MAX` and that would also lead to a panic. Before it might have popped somewhere between zero and a few elements from the iterator before panicking while it now panics immediately.
Overall this should reduce codegen by eliminating the fallback paths.
While looking into the `with_capacity()` behavior I also noticed that its documentation didn't have a *Panics* section, so I added that.
Disallow octal format in Ipv4 string
In its original specification, leading zero in Ipv4 string is interpreted
as octal literals. So a IP address 0127.0.0.1 actually means 87.0.0.1.
This confusion can lead to many security vulnerabilities. Therefore, in
[IETF RFC 6943], it suggests to disallow octal/hexadecimal format in Ipv4
string all together.
Existing implementation already disallows hexadecimal numbers. This commit
makes Parser reject octal numbers.
Fixes#83648.
[IETF RFC 6943]: https://tools.ietf.org/html/rfc6943#section-3.1.1
Improve pointer arithmetic docs
* Add slightly more detailed definition of "allocated object" to the module docs, and link it from everywhere.
* Clarify the "remains attached" wording a bit (at least I hope this is clearer).
* Remove the sentence about using integer arithmetic; this seems to confuse people even if it is technically correct.
As usual, the edit needs to be done in a dozen places to remain consistent, I hope I got them all.
Clean up Vec's benchmarks
The Vec benchmarks need a lot of love. I sort of noticed this in https://github.com/rust-lang/rust/pull/83357 but the overall situation is much less awesome than I thought at the time. The first commit just removes a lot of asserts and does a touch of other cleanup.
A number of these benchmarks are poorly-named. For example, `bench_map_fast` is not in fact fast, `bench_rev_1` and `bench_rev_2` are vague, `bench_in_place_zip_iter_mut` doesn't call `zip`, `bench_in_place*` don't do anything in-place... Should I fix these, or is there tooling that depend on the names not changing?
I've also noticed that `bench_rev_1` and `bench_rev_2` are remarkably fragile. It looks like poking other code in `Vec` can cause the codegen of this benchmark to switch to a version that has almost exactly half its current throughput and I have absolutely no idea why.
Here's the fast version:
```asm
0.69 │110: movdqu -0x20(%rbx,%rdx,4),%xmm0
1.76 │ movdqu -0x10(%rbx,%rdx,4),%xmm1
0.71 │ pshufd $0x1b,%xmm1,%xmm1
0.60 │ pshufd $0x1b,%xmm0,%xmm0
3.68 │ movdqu %xmm1,-0x30(%rcx)
14.36 │ movdqu %xmm0,-0x20(%rcx)
13.88 │ movdqu -0x40(%rbx,%rdx,4),%xmm0
6.64 │ movdqu -0x30(%rbx,%rdx,4),%xmm1
0.76 │ pshufd $0x1b,%xmm1,%xmm1
0.77 │ pshufd $0x1b,%xmm0,%xmm0
1.87 │ movdqu %xmm1,-0x10(%rcx)
13.01 │ movdqu %xmm0,(%rcx)
38.81 │ add $0x40,%rcx
0.92 │ add $0xfffffffffffffff0,%rdx
1.22 │ ↑ jne 110
```
And the slow one:
```asm
0.42 │9a880: movdqa %xmm2,%xmm1
4.03 │9a884: movq -0x8(%rbx,%rsi,4),%xmm4
8.49 │9a88a: pshufd $0xe1,%xmm4,%xmm4
2.58 │9a88f: movq -0x10(%rbx,%rsi,4),%xmm5
7.02 │9a895: pshufd $0xe1,%xmm5,%xmm5
4.79 │9a89a: punpcklqdq %xmm5,%xmm4
5.77 │9a89e: movdqu %xmm4,-0x18(%rdx)
15.74 │9a8a3: movq -0x18(%rbx,%rsi,4),%xmm4
3.91 │9a8a9: pshufd $0xe1,%xmm4,%xmm4
5.04 │9a8ae: movq -0x20(%rbx,%rsi,4),%xmm5
5.29 │9a8b4: pshufd $0xe1,%xmm5,%xmm5
4.60 │9a8b9: punpcklqdq %xmm5,%xmm4
9.81 │9a8bd: movdqu %xmm4,-0x8(%rdx)
11.05 │9a8c2: paddq %xmm3,%xmm0
0.86 │9a8c6: paddq %xmm3,%xmm2
5.89 │9a8ca: add $0x20,%rdx
0.12 │9a8ce: add $0xfffffffffffffff8,%rsi
1.16 │9a8d2: add $0x2,%rdi
2.96 │9a8d6: → jne 9a880 <<alloc::vec::Vec<T,A> as core::iter::traits::collect::Extend<&T>>::extend+0xd0>
```
In its original specification, leading zero in Ipv4 string is interpreted
as octal literals. So a IP address 0127.0.0.1 actually means 87.0.0.1.
This confusion can lead to many security vulnerabilities. Therefore, in
[IETF RFC 6943], it suggests to disallow octal/hexadecimal format in Ipv4
string all together.
Existing implementation already disallows hexadecimal numbers. This commit
makes Parser reject octal numbers.
Fixes#83648.
[IETF RFC 6943]: https://tools.ietf.org/html/rfc6943#section-3.1.1
unix: Fix feature(unix_socket_ancillary_data) on macos and other BSDs
This adds support for CMSG handling on macOS and fixes it on OpenBSD and possibly other BSDs.
When traversing the CMSG list, the previous code had an exception for Android where the next element after the last pointer could point to the first pointer instead of NULL. This is actually not specific to Android: the `libc::CMSG_NXTHDR` implementation for Linux and emscripten have a special case to return NULL when the length of the previous element is zero; most other implementations simply return the previous element plus a zero offset in this case.
This MR makes the check non-optional which fixes CMSG handling and a possible endless loop on such systems; tested with file descriptor passing on OpenBSD, Linux, and macOS.
This MR additionally adds `SocketAncillary::is_empty` because clippy is right that it should be added.
This belongs to the `feature(unix_socket_ancillary_data)` tracking issue: https://github.com/rust-lang/rust/issues/76915
r? `@joshtriplett`
escape_ascii take 2
The previous PR, #73111 was closed for inactivity; since I've had trouble in the past reopening closed PRs, I'm just making a new one.
I'm still running the tests locally but figured I'd open the PR in the meantime. Will fix whatever errors show up so we don't have to wait again for this.
r? ``@m-ou-se``
alloc: Added `as_slice` method to `BinaryHeap` collection
I initially asked about whether it is useful addition on https://internals.rust-lang.org/t/should-i-add-as-slice-method-to-binaryheap/13816, and it seems there were no objections, so went ahead with this PR.
> There is [`BinaryHeap::into_vec`](https://doc.rust-lang.org/std/collections/struct.BinaryHeap.html#method.into_vec), but it consumes the value. I wonder if there is API design limitation that should be taken into account. Implementation-wise, the inner buffer is just a Vec, so it is trivial to expose as_slice from it.
Please, guide me through if I need to add tests or something else.
UPD: Tracking issue #83659
may not -> might not
may not -> might not
"may not" has two possible meanings:
1. A command: "You may not stay up past your bedtime."
2. A fact that's only sometimes true: "Some cities may not have bike lanes."
In some cases, the meaning is ambiguous: "Some cars may not have snow
tires." (do the cars *happen* to not have snow tires, or is it
physically impossible for them to have snow tires?)
This changes places where the standard library uses the "description of
fact" meaning to say "might not" instead.
This is just `std::vec` for now - if you think this is a good idea I can
convert the rest of the standard library.
Adjust documentation links for slice::make_ascii_*case
The documentation for the functions `slice::to_ascii_lowercase` and `slice::to_ascii_uppercase` contain the suggestion
> To lowercase the value in-place, use `make_ascii_lowercase`
however the link to the suggested method takes you to the page for `u8`, rather than the method of that name on the same page.
Instruct LLVM that binary_search returns a valid index
This allows removing bound checks when the return value of `binary_search` is used to index into the slice it was call on. I also added a codegen test for this, not sure if it's the right thing to do (I didn't find anything on the dev guide), but it felt so.
"may not" has two possible meanings:
1. A command: "You may not stay up past your bedtime."
2. A fact that's only sometimes true: "Some cities may not have bike lanes."
In some cases, the meaning is ambiguous: "Some cars may not have snow
tires." (do the cars *happen* to not have snow tires, or is it
physically impossible for them to have snow tires?)
This changes places where the standard library uses the "description of
fact" meaning to say "might not" instead.
This is just `std::vec` for now - if you think this is a good idea I can
convert the rest of the standard library.
Improve fs error open_from unix
Consistency for #79399
Suggested by JohnTitor
r? `@JohnTitor`
Not user if the error is too long now, do we handle long errors well?
Add function core::iter::zip
This makes it a little easier to `zip` iterators:
```rust
for (x, y) in zip(xs, ys) {}
// vs.
for (x, y) in xs.into_iter().zip(ys) {}
```
You can `zip(&mut xs, &ys)` for the conventional `iter_mut()` and
`iter()`, respectively. This can also support arbitrary nesting, where
it's easier to see the item layout than with arbitrary `zip` chains:
```rust
for ((x, y), z) in zip(zip(xs, ys), zs) {}
for (x, (y, z)) in zip(xs, zip(ys, zs)) {}
// vs.
for ((x, y), z) in xs.into_iter().zip(ys).zip(xz) {}
for (x, (y, z)) in xs.into_iter().zip((ys.into_iter().zip(xz)) {}
```
It may also format more nicely, especially when the first iterator is a
longer chain of methods -- for example:
```rust
iter::zip(
trait_ref.substs.types().skip(1),
impl_trait_ref.substs.types().skip(1),
)
// vs.
trait_ref
.substs
.types()
.skip(1)
.zip(impl_trait_ref.substs.types().skip(1))
```
This replaces the tuple-pair `IntoIterator` in #78204.
There is prior art for the utility of this in [`itertools::zip`].
[`itertools::zip`]: https://docs.rs/itertools/0.10.0/itertools/fn.zip.html
update array missing `IntoIterator` msg
fixes#82602
r? ```@estebank``` do you know whether we can use the expr span in `rustc_on_unimplemented`? The label isn't too great rn
make unaligned_references future-incompat lint warn-by-default
and also remove the safe_packed_borrows lint that it replaces.
`std::ptr::addr_of!` has hit beta now and will hit stable in a month, so I propose we start fixing https://github.com/rust-lang/rust/issues/27060 for real: creating a reference to a field of a packed struct needs to eventually become a hard error; this PR makes it a warn-by-default future-incompat lint. (The lint already existed, this just raises its default level.) At the same time I removed the corresponding code from unsafety checking; really there's no reason an `unsafe` block should make any difference here.
For references to packed fields outside `unsafe` blocks, this means `unaligned_refereces` replaces the previous `safe_packed_borrows` warning with a link to https://github.com/rust-lang/rust/issues/82523 (and no more talk about unsafe blocks making any difference). So behavior barely changes, the warning is just worded differently. For references to packed fields inside `unsafe` blocks, this PR shows a new future-incompat warning.
Closes https://github.com/rust-lang/rust/issues/46043 because that lint no longer exists.
Improve Debug implementations of Mutex and RwLock.
This improves the Debug implementations of Mutex and RwLock.
They now show the poison flag and use debug_non_exhaustive. (See #67364.)
Derive Debug for io::Chain instead of manually implementing it.
This derives Debug for io::Chain instead of manually implementing it.
The manual implementation has the same bounds, so I don't think there's any reason for a manual implementation. The names used in the derive implementation are even nicer (`first`/`second`) than the manual implementation (`t`/`u`), and include the `done_first` field too.
Fix Debug implementation for RwLock{Read,Write}Guard.
This would attempt to print the Debug representation of the lock that the guard has locked, which will try to lock again, fail, and just print `"<locked>"` unhelpfully.
After this change, this just prints the contents of the mutex, like the other smart pointers (and MutexGuard) do.
MutexGuard had this problem too: https://github.com/rust-lang/rust/issues/57702
ExitStatus: print "exit status: {}" rather than "exit code: {}" on unix
Proper Unix terminology is "exit status" (vs "wait status"). "exit
code" is imprecise on Unix and therefore unclear. (As far as I can
tell, "exit code" is correct terminology on Windows.)
This new wording is unfortunately inconsistent with the identifier
names in the Rust stdlib.
It is the identifier names that are wrong, as discussed at length in eg
https://doc.rust-lang.org/nightly/std/process/struct.ExitStatus.htmlhttps://doc.rust-lang.org/nightly/std/os/unix/process/trait.ExitStatusExt.html
Unfortunately for API stability reasons it would be a lot of work, and
a lot of disruption, to change the names in the stdlib (eg to rename
`std::process::ExitStatus` to `std::process::ChildStatus` or
something), but we should fix the message output. Many (probably
most) readers of these messages about exit statuses will be users and
system administrators, not programmers, who won't even know that Rust
has this wrong terminology.
So I think the right thing is to fix the documentation (as I have
already done) and, now, the terminology in the implementation.
This is a user-visible change to the behaviour of all Rust programs
which run Unix subprocesses. Hopefully no-one is matching against the
exit status string, except perhaps in tests.
