Support parsing IP addresses from a byte string
Fixes#94821
The goal is to be able to parse addresses from a byte string without requiring to do any utf8 validation. Since internally the parser already works on byte strings, this should be possible and I personally already needed this in the past too.
~~I used the proposed approach from the issue by implementing `TryFrom<&'a [u8]>` for all 6 address types (3 ip address types and 3 socket address types). I believe implementing stable traits for stable types is insta-stable so this will probably need an FCP?~~
Switched to an unstable inherent method approach called `parse_ascii` as requested.
cc ``````@jyn514``````
Rework Ipv6Addr::is_global to check for global reachability rather than global scope - rebase
Rebasing of pull request #86634 off of master to try and get the feature "ip" stabilized.
I also found a test failure in the rebase that is_global was considering the benchmark space to be globally reachable.
This is related to my other rebasing pull request #99947
Implement network primitives with ideal Rust layout, not C system layout
This PR is the result of this internals forum thread: https://internals.rust-lang.org/t/why-are-socketaddrv4-socketaddrv6-based-on-low-level-sockaddr-in-6/13321.
Instead of basing `std:::net::{Ipv4Addr, Ipv6Addr, SocketAddrV4, SocketAddrV6}` on system (C) structs, they are encoded in a more optimal and idiomatic Rust way.
This changes the public API of std by introducing structural equality impls for all four types here, which means that `match ipv4addr { SOME_CONSTANT => ... }` will now compile, whereas previously this was an error. No other intentional changes are introduced to public API.
It's possible to observe the current layout of these types (e.g., by pointer casting); most but not all libraries which were found by Crater to do this have had updates issued and affected versions yanked. See report below.
### Benefits of this change
- It will become possible to move these fundamental network types from `std` into `core` ([RFC](https://github.com/rust-lang/rfcs/pull/2832)).
- Some methods that can't be made `const fn`s today can be made `const fn`s with this change.
- `SocketAddrV4` only occupies 6 bytes instead of 16 bytes.
- These simple primitives become easier to read and uses less `unsafe`.
- Makes these types support structural equality, which means you can now (for instance) match an `Ipv4Addr` against a constant
### ~Remaining~ Previous problems
This change obviously changes the memory layout of the types. And it turns out some libraries invalidly assumes the memory layout and does very dangerous pointer casts to convert them. These libraries will have undefined behaviour and perform invalid memory access until patched.
- [x] - `mio` - Issue: https://github.com/tokio-rs/mio/issues/1386.
- [x] `0.7` branch https://github.com/tokio-rs/mio/pull/1388
- [x] `0.7.6` published https://github.com/tokio-rs/mio/pull/1398
- [x] Yank all `0.7` versions older than `0.7.6`
- [x] Report `<0.7.6` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0081.html
- [x] - `socket2` - Issue: https://github.com/rust-lang/socket2-rs/issues/119.
- [x] `0.3.x` branch https://github.com/rust-lang/socket2-rs/pull/120
- [x] `0.3.16` published
- [x] `master` branch https://github.com/rust-lang/socket2-rs/pull/122
- [x] Yank all `0.3` versions older than `0.3.16`
- [x] Report `<0.3.16` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0079.html
- [x] - `net2` - Issue: https://github.com/deprecrated/net2-rs/issues/105
- [x] https://github.com/deprecrated/net2-rs/pull/106
- [x] `0.2.36` published
- [x] Yank all `0.2` versions older than `0.2.36`
- [x] Report `<0.2.36` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0078.html
- [x] - `miow` - Issue: https://github.com/yoshuawuyts/miow/issues/38
- [x] `0.3.x` - https://github.com/yoshuawuyts/miow/pull/39
- [x] `0.3.6` published
- [x] `0.2.x` - https://github.com/yoshuawuyts/miow/pull/40
- [x] `0.2.2` published
- [x] Yanked all `0.2` versions older than `0.2.2`
- [x] Yanked all `0.3` versions older than `0.3.6`
- [x] Report `<0.2.2` and `<0.3.6` to RustSec Advisory Database https://rustsec.org/advisories/RUSTSEC-2020-0080.html
- [x] - `quinn master` (aka what became 0.7) - https://github.com/quinn-rs/quinn/issues/968https://github.com/quinn-rs/quinn/pull/987
- [x] - `quinn 0.6` - https://github.com/quinn-rs/quinn/pull/1045
- [x] - `quinn 0.5` - https://github.com/quinn-rs/quinn/pull/1046
- [x] - Release `0.7.0`, `0.6.2` and `0.5.4`
- [x] - `nb-connect` - https://github.com/smol-rs/nb-connect/issues/1
- [x] - Release `1.0.3`
- [x] - Yank all versions older than `1.0.3`
- [x] - `shadowsocks-rust` - https://github.com/shadowsocks/shadowsocks-rust/issues/462
- [ ] - `rio` - https://github.com/spacejam/rio/issues/44
- [ ] - `seaslug` - https://github.com/spacejam/seaslug/issues/1
#### Fixed crate versions
All crates I have found that assumed the memory layout have been fixed and published. The crates and versions that will continue working even as/if this PR is merged is (please upgrade these to help unblock this PR):
* `net2 0.2.36`
* `socket2 0.3.16`
* `miow 0.2.2`
* `miow 0.3.6`
* `mio 0.7.6`
* `mio 0.6.23` - Never had the invalid assumption itself, but has now been bumped to only allow fixed dependencies (`net2` + `miow`)
* `nb-connect 1.0.3`
* `quinn 0.5.4`
* `quinn 0.6.2`
### Release notes draft
This release changes the memory layout of `Ipv4Addr`, `Ipv6Addr`, `SocketAddrV4` and `SocketAddrV6`. The standard library no longer implements these as the corresponding `libc` structs (`sockaddr_in`, `sockaddr_in6` etc.). This internal representation was never exposed, but some crates relied on it anyway by unsafely transmuting. This change will cause those crates to make invalid memory accesses. Notably `net2 <0.2.36`, `socket2 <0.3.16`, `mio <0.7.6`, `miow <0.3.6` and a few other crates are affected. All known affected crates have been patched and have had fixed versions published over a year ago. If any affected crate is still in your dependency tree, you need to upgrade them before using this version of Rust.
Implement `FusedIterator` for `std::net::[Into]Incoming`
They never return `None`, so they trivially fulfill the contract.
What should I put for the stability attribute of `Incoming`?
Stabilize `Ipv6Addr::to_ipv4_mapped`
CC https://github.com/rust-lang/rust/issues/27709 (tracking issue for the `ip` feature which contains more
functions)
The function `Ipv6Addr::to_ipv4` is bad because it also returns an IPv4
address for the IPv6 loopback address `::1`. Stabilize
`Ipv6Addr::to_ipv4_mapped` so we can recommend that function instead.
CC #27709 (tracking issue for the `ip` feature which contains more
functions)
The function `Ipv6Addr::to_ipv4` is bad because it also returns an IPv4
address for the IPv6 loopback address `::1`. Stabilize
`Ipv6Addr::to_ipv4_mapped` so we can recommend that function instead.
Remove `#[rustc_deprecated]`
This removes `#[rustc_deprecated]` and introduces diagnostics to help users to the right direction (that being `#[deprecated]`). All uses of `#[rustc_deprecated]` have been converted. CI is expected to fail initially; this requires #95958, which includes converting `stdarch`.
I plan on following up in a short while (maybe a bootstrap cycle?) removing the diagnostics, as they're only intended to be short-term.
The existing description was incorrect for socket addresses, and
misleading: users would see “invalid IP address syntax” and suppose they
were supposed to provide an IP address rather than a socket address.
I contemplated making it two variants (IP, socket), but realised we can
do still better for the IPv4 and IPv6 types, so here it is as six.
I contemplated more precise error descriptions (e.g. “invalid IPv6
socket address syntax: expected a decimal scope ID after %”), but that’s
a more invasive change, and probably not worthwhile anyway.
This updates the standard library's documentation to use the new syntax. The
documentation is worthwhile to update as it should be more idiomatic
(particularly for features like this, which are nice for users to get acquainted
with). The general codebase is likely more hassle than benefit to update: it'll
hurt git blame, and generally updates can be done by folks updating the code if
(and when) that makes things more readable with the new format.
A few places in the compiler and library code are updated (mostly just due to
already having been done when this commit was first authored).
Clarification of default socket flags
This PR outlines the decision to disable inheritance of socket objects when possible to child processes in the documentation.
