Add semicolon to "perhaps add a `use` for one of them" help
Similar to pull request #37430, this makes the message more copy-paste
friendly and aligns it with other messages like:
help: you can import it into scope: use foo::Bar;
r? @eddyb
coherence: skip impls with an erroneous trait ref
Impls with a erroneous trait ref are already ignored in the first part
of coherence, so ignore them in the second part too. This avoids
cascading coherence errors when 1 impl of a trait has an error.
r? @nikomatsakis
Support `use`ing externally defined macros behind `#![feature(use_extern_macros)]`
With `#![feature(use_extern_macros)]`,
- A name collision between macros from different upstream crates is much less of an issue since we can `use` the macros in different submodules or rename with `as`.
- We can reexport macros with `pub use`, so `#![feature(macro_reexport)]` is no longer needed.
- These reexports are allowed in any module, so crates can expose a macro-modular interface.
If a macro invocation can resolve to both a `use` import and a `macro_rules!` or `#[macro_use]`, it is an ambiguity error.
r? @nrc
Refactoring towards region obligation
Two refactorings towards the intermediate goal of propagating region obligations through the `InferOk` structure (which in turn leads to the possibility of lazy normalization).
1. Remove `TypeOrigin` and add `ObligationCause`
- as we converge subtyping and obligations and so forth, the ability to keep these types distinct gets harder
2. Propagate obligations from `InferOk` into the surrounding fulfillment context
After these land, I have a separate branch (which still needs a bit of work) that can make the actual change to stop directly adding subregion edges and instead propagate obligations. (This should also make it easier to fix the unsoundness in specialization around lifetimes.)
r? @eddyb
The makefiles and `mklldeps.py` called `llvm-config --shared-mode` to
find out if LLVM defaulted to shared or static libraries, and just went
with that. But under rustbuild, `librustc_llvm/build.rs` was assuming
that LLVM should be static, and even forcing `--link-static` for 3.9+.
Now that build script also uses `--shared-mode` to learn the default,
which should work better for pre-3.9 configured for dynamic linking, as
it wasn't possible back then to choose differently via `llvm-config`.
Further, the configure script now has a new `--enable-llvm-link-shared`
option, which allows one to manually override `--link-shared` on 3.9+
instead of forcing static.
Fix grammar verification
* Use make check-lexer to verify the grammar.
* Extend grammar/README
* Add make clean-grammar rule
* Add target check-build-lexer-verifier to make tidy, so it will build the verifier with every build and catch future errors
This is the continuation of #34994
r? @steveklabnik @jonathandturner @alexcrichton
to actually use the AAPCS calling convention
closes#37810
This is technically a [breaking-change] because it changes the ABI of
`extern "aapcs"` functions that (a) involve `f32`/`f64` arguments/return
values and (b) are compiled for arm-eabihf targets from
"aapcs-vfp" (wrong) to "aapcs" (correct).
Appendix:
What these ABIs mean?
- In the "aapcs-vfp" ABI or "hard float" calling convention: Floating
point values are passed/returned through FPU registers (s0, s1, d0, etc.)
- Whereas, in the "aapcs" ABI or "soft float" calling convention:
Floating point values are passed/returned through general purpose
registers (r0, r1, etc.)
Mixing these ABIs can cause problems if the caller assumes that the
routine is using one of these ABIs but it's actually using the other
one.
* Use `make check-lexer` to verify the grammar.
* Extend grammar/README
* Add make clean-grammar rule
* Add target `check-build-lexer-verifier` to `make tidy`, so it will build the verifier with every build and catch future errors
* Search for antlr4 with configure and find
This allows you to enable *all* nested visits in a future-compatible
sort of way. Moreover, if you choose to override the `visit_nested`
methods yourself, you can "future-proof" against omissions by overriding
`nested_visit_map` to panic.
This helps with incr. comp. because otherwise the Collect(Impl) check
winds up touching all of the impl items; since Collect(Impl) also
produces the types for the impl header, this creates a polluted graph
where the impl types depend on the impl items.
This commit does not change how the incremental accounting is done, so
changes (or accessses) to an impl-item are still tagged to the enclosing
impl.
This commits adds the "main guts" of this change. It does not build on
its own.
rustc: Implement #[link(cfg(..))] and crt-static
This commit is an implementation of [RFC 1721] which adds a new target feature
to the compiler, `crt-static`, which can be used to select how the C runtime for
a target is linked. Most targets dynamically linke the C runtime by default with
the notable exception of some of the musl targets.
[RFC 1721]: https://github.com/rust-lang/rfcs/blob/master/text/1721-crt-static.md
This commit first adds the new target-feature, `crt-static`. If enabled, then
the `cfg(target_feature = "crt-static")` will be available. Targets like musl
will have this enabled by default. This feature can be controlled through the
standard target-feature interface, `-C target-feature=+crt-static` or
`-C target-feature=-crt-static`.
Next this adds an gated and unstable `#[link(cfg(..))]` feature to enable the
`crt-static` semantics we want with libc. The exact behavior of this attribute
is a little squishy, but it's intended to be a forever-unstable
implementation detail of the liblibc crate.
Specifically the `#[link(cfg(..))]` annotation means that the `#[link]`
directive is only active in a compilation unit if that `cfg` value is satisfied.
For example when compiling an rlib, these directives are just encoded and
ignored for dylibs, and all staticlibs are continued to be put into the rlib as
usual. When placing that rlib into a staticlib, executable, or dylib, however,
the `cfg` is evaluated *as if it were defined in the final artifact* and the
library is decided to be linked or not.
Essentially, what'll happen is:
* On MSVC with `-C target-feature=-crt-static`, the `msvcrt.lib` library will be
linked to.
* On MSVC with `-C target-feature=+crt-static`, the `libcmt.lib` library will be
linked to.
* On musl with `-C target-feature=-crt-static`, the object files in liblibc.rlib
are removed and `-lc` is passed instead.
* On musl with `-C target-feature=+crt-static`, the object files in liblibc.rlib
are used and `-lc` is not passed.
This commit does **not** include an update to the liblibc module to implement
these changes. I plan to do that just after the 1.14.0 beta release is cut to
ensure we get ample time to test this feature.
cc #37406
This commit is an implementation of [RFC 1721] which adds a new target feature
to the compiler, `crt-static`, which can be used to select how the C runtime for
a target is linked. Most targets dynamically linke the C runtime by default with
the notable exception of some of the musl targets.
[RFC 1721]: https://github.com/rust-lang/rfcs/blob/master/text/1721-crt-static.md
This commit first adds the new target-feature, `crt-static`. If enabled, then
the `cfg(target_feature = "crt-static")` will be available. Targets like musl
will have this enabled by default. This feature can be controlled through the
standard target-feature interface, `-C target-feature=+crt-static` or
`-C target-feature=-crt-static`.
Next this adds an gated and unstable `#[link(cfg(..))]` feature to enable the
`crt-static` semantics we want with libc. The exact behavior of this attribute
is a little squishy, but it's intended to be a forever-unstable
implementation detail of the liblibc crate.
Specifically the `#[link(cfg(..))]` annotation means that the `#[link]`
directive is only active in a compilation unit if that `cfg` value is satisfied.
For example when compiling an rlib, these directives are just encoded and
ignored for dylibs, and all staticlibs are continued to be put into the rlib as
usual. When placing that rlib into a staticlib, executable, or dylib, however,
the `cfg` is evaluated *as if it were defined in the final artifact* and the
library is decided to be linked or not.
Essentially, what'll happen is:
* On MSVC with `-C target-feature=-crt-static`, the `msvcrt.lib` library will be
linked to.
* On MSVC with `-C target-feature=+crt-static`, the `libcmt.lib` library will be
linked to.
* On musl with `-C target-feature=-crt-static`, the object files in liblibc.rlib
are removed and `-lc` is passed instead.
* On musl with `-C target-feature=+crt-static`, the object files in liblibc.rlib
are used and `-lc` is not passed.
This commit does **not** include an update to the liblibc module to implement
these changes. I plan to do that just after the 1.14.0 beta release is cut to
ensure we get ample time to test this feature.
cc #37406
rustdoc: Fix some local inlining issues
* Only inline public items when inlining glob imports.
* Never inline while in a private module or a child of a private module.
* Never inline impls. This allowed the removal of a workaround in the
rendering code.
Remove `scope_auxiliary`.
`scope_auxiliary` is a big part of the high memory usage in #36799. It's only used for MIR dumping. I have taken a hubristic approach: I have assumed that particular use is unimportant and removed `scope_auxiliary` and related things. This reduces peak RSS by ~10% for a cut-down version of the program in #36799.
If that assumption is wrong perhaps we can avoid building `scope_auxiliary` unless MIR dumping is enabled.
