libcompiler-rt.a is dead, long live libcompiler-builtins.rlib
This commit moves the logic that used to build libcompiler-rt.a into a
compiler-builtins crate on top of the core crate and below the std crate.
This new crate still compiles the compiler-rt instrinsics using gcc-rs
but produces an .rlib instead of a static library.
Also, with this commit rustc no longer passes -lcompiler-rt to the
linker. This effectively makes the "no-compiler-rt" field of target
specifications a no-op. Users of `no_std` will have to explicitly add
the compiler-builtins crate to their crate dependency graph *if* they
need the compiler-rt intrinsics. Users of the `std` have to do nothing
extra as the std crate depends on compiler-builtins.
Finally, this a step towards lazy compilation of std with Cargo as the
compiler-rt intrinsics can now be built by Cargo instead of having to
be supplied by the user by some other method.
closes#34400
This adds support for building the Rust compiler and standard
library for s390x-linux, allowing a full cross-bootstrap sequence
to complete. This includes:
- Makefile/configure changes to allow native s390x builds
- Full Rust compiler support for the s390x C ABI
(only the non-vector ABI is supported at this point)
- Port of the standard library to s390x
- Update the liblibc submodule to a version including s390x support
- Testsuite fixes to allow clean "make check" on s390x
Caveats:
- Resets base cpu to "z10" to bring support in sync with the default
behaviour of other compilers on the platforms. (Usually, upstream
supports all older processors; a distribution build may then chose
to require a more recent base version.) (Also, using zEC12 causes
failures in the valgrind tests since valgrind doesn't fully support
this CPU yet.)
- z13 vector ABI is not yet supported. To ensure compatible code
generation, the -vector feature is passed to LLVM. Note that this
means that even when compiling for z13, no vector instructions
will be used. In the future, support for the vector ABI should be
added (this will require common code support for different ABIs
that need different data_layout strings on the same platform).
- Two test cases are (temporarily) ignored on s390x to allow passing
the test suite. The underlying issues still need to be fixed:
* debuginfo/simd.rs fails because of incorrect debug information.
This seems to be a LLVM bug (also seen with C code).
* run-pass/union/union-basic.rs simply seems to be incorrect for
all big-endian platforms.
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
add mips64-gnu and mips64el-gnu targets
With this commit one can build no_core (and probably no_std as well)
Rust programs for these targets. It's not yet possible to cross compile
std for these targets because rust-lang/libc doesn't know about the
mips64 architecture.
These targets have been tested by cross compiling the "smallest hello"
program (see code below) and then running it under QEMU.
``` rust
extern {
fn puts(_: *const u8);
}
fn start(_: isize, _: *const *const u8) -> isize {
unsafe {
let msg = b"Hello, world!\0";
puts(msg as *const _ as *const u8);
}
0
}
trait Copy {}
trait Sized {}
```
cc #36015
r? @alexcrichton
cc @brson
The cabi stuff is likely wrong. I just copied cabi_mips source and changed some `4`s to `8`s and `32`s to `64`s. It was enough to get libc's `puts` to work but I'd like someone familiar with this module to check it.
A new target, `s390x-unknown-linux-gnu`, has been added to the compiler
and can be used to build no_core/no_std Rust programs.
Known limitations:
- librustc_trans/cabi_s390x.rs is missing. This means no support for
`extern "C" fn`.
- No support for this arch in libc. This means std can be cross compiled
for this target.
With this commit one can build no_core (and probably no_std as well)
Rust programs for these targets. It's not yet possible to cross compile
std for these targets because rust-lang/libc doesn't know about the
mips64 architecture.
These targets have been tested by cross compiling the "smallest hello"
program (see code below) and then running it under QEMU.
``` rust
#![feature(start)]
#![feature(lang_items)]
#![feature(no_core)]
#![no_core]
#[link(name = "c")]
extern {
fn puts(_: *const u8);
}
#[start]
fn start(_: isize, _: *const *const u8) -> isize {
unsafe {
let msg = b"Hello, world!\0";
puts(msg as *const _ as *const u8);
}
0
}
#[lang = "copy"]
trait Copy {}
#[lang = "sized"]
trait Sized {}
```
One of the primary platforms for the `armv7-unknown-linux-gnueabihf` target,
Linux distributions, do not enable NEON extensions by default. This PR disables
that feature by defualt but enables the `d16` feature which enables VFP3D16 that
distributions do enable.
Closes#35590
These targets cover OpenWRT 15.05 devices, which use the soft float ABI
and the uclibc library. None of the other built-in mips targets covered
those devices (mips-gnu is hard float and glibc-based, mips-musl is
musl-based).
With this commit one can now build std for these devices using these
commands:
```
$ configure --enable-rustbuild --target=mips-unknown-linux-uclibc
$ make
```
cc #35673
Use "x86-64" as the target CPU for NetBSD and Bitrig on amd64.
Using "generic" disables a number of features that are present on all
x86_64 cpus, the "x86-64" target cpu is the common denominator for that
arch.
Refs #20777
LLVM upgrade
As discussed in https://internals.rust-lang.org/t/need-help-with-emscripten-port/3154/46 I'm trying to update the used LLVM checkout in Rust.
I basically took @shepmaster's code and applied it on top (though I did the commits manually, the [original commits have better descriptions](https://github.com/rust-lang/rust/compare/master...avr-rust:avr-support).
With these changes I was able to build rustc. `make check` throws one last error on `run-pass/issue-28950.rs`. Output: https://gist.github.com/badboy/bcdd3bbde260860b6159aa49070a9052
I took the metadata changes as is and they seem to work, though it now uses the module in another step. I'm not sure if this is the best and correct way.
Things to do:
* [x] ~~Make `run-pass/issue-28950.rs` pass~~ unrelated
* [x] Find out how the `PositionIndependentExecutable` setting is now used
* [x] Is the `llvm::legacy` still the right way to do these things?
cc @brson @alexcrichton
The targets are:
- `arm-unknown-linux-musleabi`
- `arm-unknown-linux-musleabihf`
- `armv7-unknown-linux-musleabihf`
These mirror the existing `gnueabi` targets.
All of these targets produce fully static binaries, similar to the
x86 MUSL targets.
For now these targets can only be used with `--rustbuild` builds, as
https://github.com/rust-lang/compiler-rt/pull/22 only made the
necessary compiler-rt changes in the CMake configs, not the plain
GNU Make configs.
I've tested these targets GCC 5.3.0 compiled again musl-1.1.12
(downloaded from http://musl.codu.org/). An example `./configure`
invocation is:
```
./configure \
--enable-rustbuild
--target=arm-unknown-linux-musleabi \
--musl-root="$MUSL_ROOT"
```
where `MUSL_ROOT` points to the `arm-linux-musleabi` prefix.
Usually that path will be of the form
`/foobar/arm-linux-musleabi/arm-linux-musleabi`.
Usually the cross-compile toolchain will live under
`/foobar/arm-linux-musleabi/bin`. That path should either by added
to your `PATH` variable, or you should add a section to your
`config.toml` as follows:
```
[target.arm-unknown-linux-musleabi]
cc = "/foobar/arm-linux-musleabi/bin/arm-linux-musleabi-gcc"
cxx = "/foobar/arm-linux-musleabi/bin/arm-linux-musleabi-g++"
```
As a prerequisite you'll also have to put a cross-compiled static
`libunwind.a` library in `$MUSL_ROOT/lib`. This is similar to [how
the x86_64 MUSL targets are built]
(https://doc.rust-lang.org/book/advanced-linking.html).
Convert built-in targets to JSON
Convert the built-in targets to JSON to ensure that the JSON parser is always fully featured. This follows on #32988 and #32847. The PR includes a number of extra commits that are just intermediate changes necessary for bisectibility and the ability to prove correctness of the change.
Since we can know which targets are instantiable on a particular host,
it does not make sense to list invalid targets in the target print code.
Filter the list of targets to only include the targets that can be
instantiated.
Expand the supported_targets!() macro to also generate a set of
JSON encode/decode tests to verify that the parser will encode
and decode all of the fields needed for all of the builtin targets.
Additionally, add PartialEq to Target and TargetOptions in support
of the tests.
Change all the target generation functions to return a Result<Target,
String> so that targets that are unable to be instantiated can be
expressed as an Err instead of a panic!(). This should improve #33497 as
well.
Target's can already be built up from JSON files as well as built into
librustc_back so this adds the ability to convert any Target back into
JSON.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Not all TargetOptions are exposed via the JSON interface to create
different targets. This exposes all the missing items and reorders them
to match the structure so that it is easier in the future to identify
missing items.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
fix built-in target detection
previously the logic was accepting wrong triples (like
`x86_64_unknown-linux-musl`) as valid ones (like `x86_64-unknown-linux-musl`) if
they contained an underscore instead of a dash.
fixes#33329
---
r? @brson
I wanted to use a compile-fail test at first. But, you can't pass an extra `--target` flag to `rustc` for those because they already call `rustc --target $HOST` so you get a `error: Option 'target' given more than once.`. The run-make test used here works fine though.
Using "generic" disables a number of features that are present on all
x86_64 cpus, the "x86-64" target cpu is the common denominator for that
arch.
Refs #20777
Right now two MIPS targets in the compiler, `mips-unknown-linux-{gnu,musl}` both
generate object files using the soft-float ABI through LLVM by default. This is
also expressed as the `-C soft-float` codegen option and otherwise isn't used
for any other target in the compiler. This option was added quite some time ago
(back in #9617), and nowadays it's more appropriate to be done through a codegen
option.
This is motivated by #34743 which necessitated an upgrade in the CMake
installation on our bots which necessitated an upgrade in the Ubuntu version
which invalidated the MIPS compilers we were using. The new MIPS compilers
(coming from Debian I believe) all have hard float enabled by default and soft
float support not built in. This meant that we couldn't upgrade the bots
until #34841 landed because otherwise we would fail to compile C code as the
`-msoft-float` option wouldn't work.
Unfortunately, though, this means that once we upgrade the bots the C code we're
compiling will be compiled for hard float and the Rust code will be compiled
for soft float, a bad mismatch! This PR remedies the situation such that Rust
will compile with hard float as well.
If this lands it will likely produce broken nightlies for a day or two while we
get around to upgrading the bots because the current C toolchain only produces
soft-float binaries, and now rust will be hard-float. Hopefully, though, the
upgrade can go smoothly!
Update i686-linux-android features to match android x86 ABI.
Based on [android's official x86 ABI info](http://developer.android.com/ndk/guides/abis.html#x86), the x86 baseline CPU can be safely updated to `pentiumpro`, with the addition of `MMX`, `SSE`, `SSE2`, `SSE3`, `SSSE3` features.
r? @alexcrichton
Add armv7-linux-androideabi target
This PR adds `armv7-linux-androideabi` target that matches `armeabi-v7a` Android ABI, ~~downscales `arm-linux-androideabi` target to match `armeabi` Android ABI~~ (TBD later if needed).
This should allow us to get the best performance from every [Android ABI level](http://developer.android.com/ndk/guides/abis.html).
Currently existing target `arm-linux-androideabi` started gaining features out of the supported range of [android `armeabi`](http://developer.android.com/ndk/guides/abis.html). While android compiler does not use a different target for later supported `armv7` architecture, it has distinct ABI name `armeabi-v7a`. We decided to add rust target `armv7-linux-androideabi` to match it.
Note that `NEON`, `VFPv3-D32`, and `ThumbEE` instruction sets are not added, because not all android devices are guaranteed to support all or some of these, and [their availability should be checked at runtime](http://developer.android.com/ndk/guides/abis.html#v7a).
~~This reduces performance of existing `arm-linux-androideabi` and may make it _much_ slower (we are talking more than order of magnitude in some random ad-hoc fp benchmark that I did).~~
Part of #33278.
rustc: Change target_env for ARM targets to `gnu`
Right now they're `gnueabihf` and `gnueabi`, but when adding new platforms like
musl on ARM it's unfortunate to have to test for all three (`musl`, `musleabi`,
and `musleabihf`). This PR switches everything currently to `gnu`, and the new
musl targets can also use `musl` when they land.
Closes#33244
