Make BoundRegion have a kind of BoungRegionKind
Split from #76814
Also includes making `replace_escaping_bound_vars` only return `T`
Going to r? `@lcnr`
Feel free to reassign
const_evaluatable_checked: fix occurs check
fixes#79615
this is kind of a hack because we use `TypeRelation` for both the `Generalizer` and the `ConstInferUnifier` but i am not sure if there is a useful way to disentangle this without unnecessarily duplicating some code.
The error in the added test is kind of unavoidable until we erase the unused substs of `ConstKind::Unevaluated`. We talked a bit about this in the cg lazy norm meeting (https://rust-lang.zulipchat.com/#narrow/stream/260443-project-const-generics/topic/lazy_normalization_consts)
Move binder for dyn to each list item
This essentially changes `ty::Binder<&'tcx List<ExistentialTraitRef>>` to `&'tcx List<ty::Binder<ExistentialTraitRef>>`.
This is a first step in moving the `dyn Trait` representation closer to Chalk, which we've talked about in `@rust-lang/wg-traits.`
r? `@nikomatsakis`
consider assignments of union field of ManuallyDrop type safe
Assigning to `Copy` union fields is safe because that assignment will never drop anything. However, with https://github.com/rust-lang/rust/pull/77547, unions may also have `ManuallyDrop` fields, and their assignments are currently still unsafe. That seems unnecessary though, as assigning `ManuallyDrop` does not drop anything either, and is thus safe even for union fields.
I assume this will at least require FCP.
[mir-opt] Allow debuginfo to be generated for a constant or a Place
Prior to this commit, debuginfo was always generated by mapping a name
to a Place. This has the side-effect that `SimplifyLocals` cannot remove
locals that are only used for debuginfo because their other uses have
been const-propagated.
To allow these locals to be removed, we now allow debuginfo to point to
a constant value. The `ConstProp` pass detects when debuginfo points to
a local with a known constant value and replaces it with the value. This
allows the later `SimplifyLocals` pass to remove the local.
Create `rustc_type_ir`
Decided to start small 😄
This PR creates a `rustc_type_ir` crate as part of the WG-Traits plan to create a shared type library.
~~There already exists a `rustc_ty` crate, so I named the new crate `rustc_ty_library`. However I think it would make sense to rename the current `rustc_ty` to something else (e.g. `rustc_ty_passes`) to free the name for this new crate.~~
r? `@jackh726`
Capture precise paths in THIR and MIR
This PR allows THIR and MIR to use the result of the new capture analysis to actually capture precise paths
To achieve we:
- Writeback min capture results to TypeckResults
- Move handling upvars to PlaceBuilder in mir_build
- Lower precise paths in THIR build by reading min_captures
- Search for ancestors in min_capture when trying to build a MIR place which starts off of an upvar
Closes: https://github.com/rust-lang/project-rfc-2229/issues/10
Partly implements: rust-lang/project-rfc-2229#18
Work that remains (not in this PR):
- [ ] [Known bugs when feature gate is enabled](https://github.com/rust-lang/project-rfc-2229/projects/1?card_filter_query=label%3Abug)
- [ ] Use min_capure_map for
- [ ] Liveness analysis
- [ ] rustc_mir/interpret/validity.rs
- [ ] regionck
- [ ] rust-lang/project-rfc-2229#8
- [ ] remove closure_captures and upvar_capture_map
r? `@ghost`
Fixes#79890
Previously, we just copied a `RawDefId` from the 'old' map to the 'new'
map. However, the `RawDefId` for a given `DefPathHash` may be different
in the current compilation session. Using `def_path_hash_to_def_id`
ensures that the `RawDefId` we use is valid in the current session.
- Use closure_min_capture maps to capture precise paths
- PlaceBuilder now searches for ancestors in min_capture list
- Add API to `Ty` to allow access to the n-th element in a
tuple in O(1) time.
Co-authored-by: Roxane Fruytier <roxane.fruytier@hotmail.com>
Properly re-use def path hash in incremental mode
Fixes#79661
In incremental compilation mode, we update a `DefPathHash -> DefId`
mapping every time we create a `DepNode` for a foreign `DefId`.
This mapping is written out to the on-disk incremental cache, and is
read by the next compilation session to allow us to lazily decode
`DefId`s.
When we decode a `DepNode` from the current incremental cache, we need
to ensure that any previously-recorded `DefPathHash -> DefId` mapping
gets recorded in the new mapping that we write out. However, PR #74967
didn't do this in all cases, leading to us being unable to decode a
`DefPathHash` in certain circumstances.
This PR refactors some of the code around `DepNode` deserialization to
prevent this kind of mistake from happening again.
Prior to this commit, debuginfo was always generated by mapping a name
to a Place. This has the side-effect that `SimplifyLocals` cannot remove
locals that are only used for debuginfo because their other uses have
been const-propagated.
To allow these locals to be removed, we now allow debuginfo to point to
a constant value. The `ConstProp` pass detects when debuginfo points to
a local with a known constant value and replaces it with the value. This
allows the later `SimplifyLocals` pass to remove the local.
- Derive TypeFoldable on `hir::place::Place` and associated
structs, to them to be written into typeck results.
Co-authored-by: Jennifer Wills <wills.jenniferg@gmail.com>
Co-authored-by: Logan Mosier <logmosier@gmail.com>
extend `WithOptConstParam` docs, move rustdoc test
This should hopefully make things a bit clearer, feel free to comment on anything which can still be improved.
cc `@ecstatic-morse` `@nikomatsakis` `@RalfJung`
check the recursion limit when finding a struct's tail
fixes#79437
This does a `delay_span_bug` (via `ty_error_with_message`) rather than emit a new error message, under the assumption that there will be an error elsewhere (even if the type isn't infinitely recursive, just deeper than the recursion limit, this appears to be the case).
Fixes#79661
In incremental compilation mode, we update a `DefPathHash -> DefId`
mapping every time we create a `DepNode` for a foreign `DefId`.
This mapping is written out to the on-disk incremental cache, and is
read by the next compilation session to allow us to lazily decode
`DefId`s.
When we decode a `DepNode` from the current incremental cache, we need
to ensure that any previously-recorded `DefPathHash -> DefId` mapping
gets recorded in the new mapping that we write out. However, PR #74967
didn't do this in all cases, leading to us being unable to decode a
`DefPathHash` in certain circumstances.
This PR refactors some of the code around `DepNode` deserialization to
prevent this kind of mistake from happening again.
Fixes multiple issue with counters, with simplification
Includes a change to the implicit else span in ast_lowering, so coverage
of the implicit else no longer spans the `then` block.
Adds coverage for unused closures and async function bodies.
Fixes: #78542
Adding unreachable regions for known MIR missing from coverage map
Cleaned up PR commits, and removed link-dead-code requirement and tests
Coverage no longer depends on Issue #76038 (`-C link-dead-code` is
no longer needed or enforced, so MSVC can use the same tests as
Linux and MacOS now)
Restrict adding unreachable regions to covered files
Improved the code that adds coverage for uncalled functions (with MIR
but not-codegenned) to avoid generating coverage in files not already
included in the files with covered functions.
Resolved last known issue requiring --emit llvm-ir workaround
Fixed bugs in how unreachable code spans were added.
Revert "Auto merge of #79209
r? `@nikomatsakis`
This has caused some issues (#79560) so better to revert and try to come up with a proper fix without rush.
Implement lazy decoding of DefPathTable during incremental compilation
PR https://github.com/rust-lang/rust/pull/75813 implemented lazy decoding of the `DefPathTable` from crate metadata. However, it requires decoding the entire `DefPathTable` when incremental compilation is active, so that we can map a decoded `DefPathHash` to a `DefId` from an arbitrary crate.
This PR adds support for lazy decoding of dependency `DefPathTable`s when incremental compilation si active.
When we load the incremental cache and dep
graph, we need the ability to map a `DefPathHash` to a `DefId` in the
current compilation session (if the corresponding definition still
exists).
This is accomplished by storing the old `DefId` (that is, the `DefId`
from the previous compilation session) for each `DefPathHash` we need to
remap. Since a `DefPathHash` includes the owning crate, the old crate is
guaranteed to be the right one (if the definition still exists). We then
use the old `DefIndex` as an initial guess, which we validate by
comparing the expected and actual `DefPathHash`es. In most cases,
foreign crates will be completely unchanged, which means that we our
guess will be correct. If our guess is wrong, we fall back to decoding
the entire `DefPathTable` for the foreign crate. This still represents
an improvement over the status quo, since we can skip decoding the
entire `DefPathTable` for other crates (where all of our guesses were
correct).
Support repr(simd) on ADTs containing a single array field
This is a squash and rebase of `@gnzlbg's` #63531
I've never actually written code in the compiler before so just fumbled my way around until it would build 😅
I imagine there'll be some work we need to do in `rustc_codegen_cranelift` too for this now, but might need some input from `@bjorn3` to know what that is.
cc `@rust-lang/project-portable-simd`
-----
This PR allows using `#[repr(simd)]` on ADTs containing a single array field:
```rust
#[repr(simd)] struct S0([f32; 4]);
#[repr(simd)] struct S1<const N: usize>([f32; N]);
#[repr(simd)] struct S2<T, const N: usize>([T; N]);
```
This should allow experimenting with portable packed SIMD abstractions on nightly that make use of const generics.
