Some command-line options accessible through `sess.opts` are best
accessed through wrapper functions on `Session`, `TyCtxt` or otherwise,
rather than through field access on the option struct in the `Session`.
Adds a new lint which triggers on those options that should be accessed
through a wrapper function so that this is prohibited. Options are
annotated with a new attribute `rustc_lint_opt_deny_field_access` which
can specify the error message (i.e. "use this other function instead")
to be emitted.
A simpler alternative would be to simply rename the options in the
option type so that it is clear they should not be used, however this
doesn't prevent uses, just discourages them. Another alternative would
be to make the option fields private, and adding accessor functions on
the option types, however the wrapper functions sometimes rely on
additional state from `Session` or `TyCtxt` which wouldn't be available
in an function on the option type, so the accessor would simply make the
field available and its use would be discouraged too.
Signed-off-by: David Wood <david.wood@huawei.com>
Remove erroneous E0133 code from an error message.
This error message is about `derive` and `packed`, but E0133 is for
"Unsafe code was used outside of an unsafe function or block".
r? ``@estebank``
Remove reachable coverage without counters
Remove reachable coverage without counters to maintain invariant that
either there is no coverage at all or there is a live coverage counter
left that provides the function source hash.
The motivating example would be a following closure:
```rust
let f = |x: bool| {
debug_assert!(x);
};
```
Which, with span changes from #93967, with disabled debug assertions,
after the final CFG simplifications but before removal of dead blocks,
gives rise to MIR:
```rust
fn main::{closure#0}(_1: &[closure@a.rs:2:13: 2:22], _2: bool) -> () {
debug x => _2;
let mut _0: ();
bb0: {
Coverage::Expression(4294967295) = 1 - 2;
return;
}
...
}
```
Which also makes the initial instrumentation quite suspect, although
this pull request doesn't attempt to address that aspect directly.
Fixes#98833.
r? ``@wesleywiser`` ``@richkadel``
Simplify some code that depend on Deref
Now that we can assume #97025 works, it's safe to expect Deref is always in the first place of projections. With this, I was able to simplify some code that depended on Deref's place in projections. When we are able to move Derefer before `ElaborateDrops` successfully we will be able to optimize more places.
r? `@oli-obk`
Remove reachable coverage without counters to maintain invariant that
either there is no coverage at all or there is a live coverage counter
left that provides the function source hash.
The motivating example would be a following closure:
```rust
let f = |x: bool| {
debug_assert!(x);
};
```
Which, with span changes from #93967, with disabled debug assertions,
after the final CFG simplifications but before removal of dead blocks,
gives rise to MIR:
```rust
fn main::{closure#0}(_1: &[closure@a.rs:2:13: 2:22], _2: bool) -> () {
debug x => _2;
let mut _0: ();
bb0: {
Coverage::Expression(4294967295) = 1 - 2;
return;
}
...
}
```
Improve error messages involving `derive` and `packed`.
There are two errors involving `derive` and `packed`.
```
`#[derive]` can't be derived on a `#[repr(packed)]` struct with type or const parameters
`#[derive]` can't be derived on a `#[repr(packed)]` struct that does not derive Copy
```
The second one overstates things. It is possible to use derive on a
repr(packed) struct that doesn't derive Copy in two cases.
- If all the fields within the struct meet the required alignment: 1 for
`repr(packed)`, or `N` for `repr(packed(N))`.
- If `Default` is the only trait derived.
This commit improves things in a few ways.
- Changes the errors to say `this trait can't be derived on this ...`.
This is more accurate, because it's just *this* trait and *this*
packed struct that are a problem, not *all* derived traits on *all*
packed structs.
- Adds more details to the "ERROR" lines in the test case, enough to
distinguish between the two error messages.
- Adds more cases to the test case that don't cause errors, e.g. `Default`
derives.
- Uses a wider variety of builtin traits in the test case, for better coverage.
r? `@estebank`
There are two errors involving `derive` and `packed`.
```
`#[derive]` can't be derived on a `#[repr(packed)]` struct with type or const parameters
`#[derive]` can't be derived on a `#[repr(packed)]` struct that does not derive Copy
```
The second one overstates things. It is possible to use derive on a
repr(packed) struct that doesn't derive Copy in two cases.
- If all the fields within the struct meet the required alignment: 1 for
`repr(packed)`, or `N` for `repr(packed(N))`.
- If `Default` is the only trait derived.
This commit improves things in a few ways.
- Changes the errors to say `$TRAIT can't be derived on this ...`.
This is more accurate, because it's just $TRAIT and *this* packed
struct that are a problem, not *all* derived traits on *all* packed
structs.
- Adds more details to the "ERROR" lines in the test case, enough to
distinguish between the two error messages.
- Adds more cases to the test case that don't cause errors, e.g. `Default`
derives.
- Uses a wider variety of builtin traits in the test case, for better coverage.
Fix unreachable coverage generation for inlined functions
To generate a function coverage we need at least one coverage counter,
so a coverage from unreachable blocks is retained only when some live
counters remain.
The previous implementation incorrectly retained unreachable coverage,
because it didn't account for the fact that those live counters can
belong to another function due to inlining.
Fixes#98833.
make vtable pointers entirely opaque
This implements the scheme discussed in https://github.com/rust-lang/unsafe-code-guidelines/issues/338: vtable pointers should be considered entirely opaque and not even readable by Rust code, similar to function pointers.
- We have a new kind of `GlobalAlloc` that symbolically refers to a vtable.
- Miri uses that kind of allocation when generating a vtable.
- The codegen backends, upon encountering such an allocation, call `vtable_allocation` to obtain an actually dataful allocation for this vtable.
- We need new intrinsics to obtain the size and align from a vtable (for some `ptr::metadata` APIs), since direct accesses are UB now.
I had to touch quite a bit of code that I am not very familiar with, so some of this might not make much sense...
r? `@oli-obk`
Remove the unused StableSet and StableMap types from rustc_data_structures.
The current implementation is not "stable" in the same sense that `HashStable` and `StableHasher` are stable, i.e. across compilation sessions. So, in my opinion, it's better to remove those types (which are basically unused anyway) than to give the wrong impression that these are safe for incr. comp.
I plan to provide new "stable" collection types soon that can be used to replace `FxHashMap` and `FxHashSet` in query results (see [draft](69d03ac7a7)). It's unsound that `HashMap` and `HashSet` implement `HashStable` (see https://github.com/rust-lang/rust/issues/98890 for a recent P-critical bug caused by this) -- so we should make some progress there.
interpret: rename Tag/PointerTag to Prov/Provenance
We were pretty inconsistent with calling this the "tag" vs the "provenance" of the pointer; I think we should consistently call it "provenance".
r? `@oli-obk`
Let's avoid using two different terms for the same thing -- let's just call it "provenance" everywhere.
In Miri, provenance consists of an AllocId and an SbTag (Stacked Borrows tag), which made this even more confusing.
interpret: make some large types not Copy
Also remove some unused trait impls (mostly HashStable).
This didn't find any unnecessary copies that I managed to avoid, but it might still be better to require explicit clone for these types? Not sure.
r? `@oli-obk`
Pull Derefer before ElaborateDrops
_Follow up work to #97025#96549#96116#95887 #95649_
This moves `Derefer` before `ElaborateDrops` and creates a new `Rvalue` called `VirtualRef` that allows us to bypass many constraints for `DerefTemp`.
r? `@oli-obk`
Lower let-else in MIR
This MR will switch to lower let-else statements in MIR building instead.
To lower let-else in MIR, we build a mini-switch two branches. One branch leads to the matching case, and the other leads to the `else` block. This arrangement will allow temporary lifetime analysis running as-is so that the temporaries are properly extended according to the same rule applied to regular `let` statements.
cc https://github.com/rust-lang/rust/issues/87335Fix#98672
To generate a function coverage we need at least one coverage counter,
so a coverage from unreachable blocks is retained only when some live
counters remain.
The previous implementation incorrectly retained unreachable coverage,
because it didn't account for the fact that those live counters can
belong to another function due to inlining.
Rollup of 9 pull requests
Successful merges:
- #97917 (Implement ExitCodeExt for Windows)
- #98844 (Reword comments and rename HIR visiting methods.)
- #98979 (interpret: use AllocRange in UninitByteAccess)
- #98986 (Fix missing word in comment)
- #98994 (replace process exit with more detailed exit in src/bootstrap/*.rs)
- #98995 (Add a test for #80471)
- #99002 (suggest adding a derive for #[default] applied to variants)
- #99004 (Add a test for #70408)
- #99017 (Replace boolean argument for print_where_clause with an enum to make code more clear)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
