Update `SessionDiagnostic::into_diagnostic` to take `Handler` instead of `ParseSess`
Suggested by the team in [this Zulip Topic](https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20SessionDiagnostic.20on.20Handler).
`Handler` already has almost all the capabilities of `ParseSess` when it comes to diagnostic emission, in this migration we only needed to add the ability to access `source_map` from the emitter in order to get a `Snippet` and the `start_point`. Not sure if adding these two methods [`span_to_snippet_from_emitter` and `span_start_point_from_emitter`] is the best way to address this gap.
P.S. If this goes in the right direction, then we probably may want to move `SessionDiagnostic` to `rustc_errors` and rename it to `DiagnosticHandler` or something similar.
r? `@davidtwco`
r? `@compiler-errors`
Suggested by the team in this Zulip Topic https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20SessionDiagnostic.20on.20Handler
Handler already has almost all the capabilities of ParseSess when it comes to diagnostic emission, in this migration we only needed to add the ability to access source_map from the emitter in order to get a Snippet and the start_point. Not sure if this is the best way to address this gap
Support `#[unix_sigpipe = "inherit|sig_dfl"]` on `fn main()` to prevent ignoring `SIGPIPE`
When enabled, programs don't have to explicitly handle `ErrorKind::BrokenPipe` any longer. Currently, the program
```rust
fn main() { loop { println!("hello world"); } }
```
will print an error if used with a short-lived pipe, e.g.
% ./main | head -n 1
hello world
thread 'main' panicked at 'failed printing to stdout: Broken pipe (os error 32)', library/std/src/io/stdio.rs:1016:9
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
by enabling `#[unix_sigpipe = "sig_dfl"]` like this
```rust
#![feature(unix_sigpipe)]
#[unix_sigpipe = "sig_dfl"]
fn main() { loop { println!("hello world"); } }
```
there is no error, because `SIGPIPE` will not be ignored and thus the program will be killed appropriately:
% ./main | head -n 1
hello world
The current libstd behaviour of ignoring `SIGPIPE` before `fn main()` can be explicitly requested by using `#[unix_sigpipe = "sig_ign"]`.
With `#[unix_sigpipe = "inherit"]`, no change at all is made to `SIGPIPE`, which typically means the behaviour will be the same as `#[unix_sigpipe = "sig_dfl"]`.
See https://github.com/rust-lang/rust/issues/62569 and referenced issues for discussions regarding the `SIGPIPE` problem itself
See the [this](https://rust-lang.zulipchat.com/#narrow/stream/219381-t-libs/topic/Proposal.3A.20First.20step.20towards.20solving.20the.20SIGPIPE.20problem) Zulip topic for more discussions, including about this PR.
Tracking issue: https://github.com/rust-lang/rust/issues/97889
Fix a bunch of typo
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
Migrate rustc_monomorphize to use SessionDiagnostic
### Description
- Migrates diagnostics in `rustc_monomorphize` to use `SessionDiagnostic`
- Adds an `impl IntoDiagnosticArg for PathBuf`
### TODO / Help!
- [x] I'm having trouble figuring out how to apply an optional note. 😕 Help!?
- Resolved. It was bad docs. Fixed in https://github.com/rust-lang/rustc-dev-guide/pull/1437/files
- [x] `errors:RecursionLimit` should be `#[fatal ...]`, but that doesn't exist so it's `#[error ...]` at the moment.
- Maybe I can switch after this is merged in? --> https://github.com/rust-lang/rust/pull/100694
- Or maybe I need to manually implement `SessionDiagnostic` instead of deriving it?
- [x] How does one go about converting an error inside of [a call to struct_span_lint_hir](8064a49508/compiler/rustc_monomorphize/src/collector.rs (L917-L927))?
- [x] ~What placeholder do you use in the fluent template to refer to the value in a vector? It seems like [this code](0b79f758c9/compiler/rustc_macros/src/diagnostics/diagnostic_builder.rs (L83-L114)) ought to have the answer (or something near it)...but I can't figure it out.~ You can't. Punted.
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
interpret: make read-pointer-as-bytes a CTFE-only error with extra information
Next step in the reaction to https://github.com/rust-lang/rust/issues/99923. Also teaches Miri to implicitly strip provenance in more situations when transmuting pointers to integers, which fixes https://github.com/rust-lang/miri/issues/2456.
Pointer-to-int transmutation during CTFE now produces a message like this:
```
= help: this code performed an operation that depends on the underlying bytes representing a pointer
= help: the absolute address of a pointer is not known at compile-time, so such operations are not supported
```
r? ``@oli-obk``
This makes it possible to instruct libstd to never touch the signal
handler for `SIGPIPE`, which makes programs pipeable by default (e.g.
with `./your-program | head -n 1`) without `ErrorKind::BrokenPipe`
errors.
Fix unreachable coverage generation for inlined functions
To generate a function coverage we need at least one coverage counter,
so a coverage from unreachable blocks is retained only when some live
counters remain.
The previous implementation incorrectly retained unreachable coverage,
because it didn't account for the fact that those live counters can
belong to another function due to inlining.
Fixes#98833.
To generate a function coverage we need at least one coverage counter,
so a coverage from unreachable blocks is retained only when some live
counters remain.
The previous implementation incorrectly retained unreachable coverage,
because it didn't account for the fact that those live counters can
belong to another function due to inlining.
Enable MIR inlining
Continuation of https://github.com/rust-lang/rust/pull/82280 by `@wesleywiser.`
#82280 has shown nice compile time wins could be obtained by enabling MIR inlining.
Most of the issues in https://github.com/rust-lang/rust/issues/81567 are now fixed,
except the interaction with polymorphization which is worked around specifically.
I believe we can proceed with enabling MIR inlining in the near future
(preferably just after beta branching, in case we discover new issues).
Steps before merging:
- [x] figure out the interaction with polymorphization;
- [x] figure out how miri should deal with extern types;
- [x] silence the extra arithmetic overflow warnings;
- [x] remove the codegen fulfilment ICE;
- [x] remove the type normalization ICEs while compiling nalgebra;
- [ ] tweak the inlining threshold.
And likewise for the `Const::val` method.
Because its type is called `ConstKind`. Also `val` is a confusing name
because `ConstKind` is an enum with seven variants, one of which is
called `Value`. Also, this gives consistency with `TyS` and `PredicateS`
which have `kind` fields.
The commit also renames a few `Const` variables from `val` to `c`, to
avoid confusion with the `ConstKind::Value` variant.
This commit makes type folding more like the way chalk does it.
Currently, `TypeFoldable` has `fold_with` and `super_fold_with` methods.
- `fold_with` is the standard entry point, and defaults to calling
`super_fold_with`.
- `super_fold_with` does the actual work of traversing a type.
- For a few types of interest (`Ty`, `Region`, etc.) `fold_with` instead
calls into a `TypeFolder`, which can then call back into
`super_fold_with`.
With the new approach, `TypeFoldable` has `fold_with` and
`TypeSuperFoldable` has `super_fold_with`.
- `fold_with` is still the standard entry point, *and* it does the
actual work of traversing a type, for all types except types of
interest.
- `super_fold_with` is only implemented for the types of interest.
Benefits of the new model.
- I find it easier to understand. The distinction between types of
interest and other types is clearer, and `super_fold_with` doesn't
exist for most types.
- With the current model is easy to get confused and implement a
`super_fold_with` method that should be left defaulted. (Some of the
precursor commits fixed such cases.)
- With the current model it's easy to call `super_fold_with` within
`TypeFolder` impls where `fold_with` should be called. The new
approach makes this mistake impossible, and this commit fixes a number
of such cases.
- It's potentially faster, because it avoids the `fold_with` ->
`super_fold_with` call in all cases except types of interest. A lot of
the time the compile would inline those away, but not necessarily
always.
omit `record_accesses` function when collecting `MonoItem`s
This PR fixes the FIXME in the impl of `record_accesses` function.
[Edit] We can call `instantiation_mode` when push the `MonoItem` into `neighbors`. This avoids extra local variables `accesses: SmallVec<[_; 128]>`
Begin fixing all the broken doctests in `compiler/`
Begins to fix#95994.
All of them pass now but 24 of them I've marked with `ignore HELP (<explanation>)` (asking for help) as I'm unsure how to get them to work / if we should leave them as they are.
There are also a few that I marked `ignore` that could maybe be made to work but seem less important.
Each `ignore` has a rough "reason" for ignoring after it parentheses, with
- `(pseudo-rust)` meaning "mostly rust-like but contains foreign syntax"
- `(illustrative)` a somewhat catchall for either a fragment of rust that doesn't stand on its own (like a lone type), or abbreviated rust with ellipses and undeclared types that would get too cluttered if made compile-worthy.
- `(not-rust)` stuff that isn't rust but benefits from the syntax highlighting, like MIR.
- `(internal)` uses `rustc_*` code which would be difficult to make work with the testing setup.
Those reason notes are a bit inconsistently applied and messy though. If that's important I can go through them again and try a more principled approach. When I run `rg '```ignore \(' .` on the repo, there look to be lots of different conventions other people have used for this sort of thing. I could try unifying them all if that would be helpful.
I'm not sure if there was a better existing way to do this but I wrote my own script to help me run all the doctests and wade through the output. If that would be useful to anyone else, I put it here: https://github.com/Elliot-Roberts/rust_doctest_fixing_tool
Collect function instance used in `global_asm!` sym operand
The constants used in SymFn operands have FnDef type,
so the type of the constant identifies the function.
Fixes#96623.
Only crate root def-ids don't have a parent, and in majority of cases the argument of `DefIdTree::parent` cannot be a crate root.
So we now panic by default in `parent` and introduce a new non-panicing function `opt_parent` for cases where the argument can be a crate root.
Same applies to `local_parent`/`opt_local_parent`.
Note this does not produce a full stack all the way to the first call that specifies all monomorphic parameters, it's just shallowly mentioning the last call site.
Generate synthetic object file to ensure all exported and used symbols participate in the linking
Fix#50007 and #47384
This is the synthetic object file approach that I described in https://github.com/rust-lang/rust/pull/95363#issuecomment-1079932354, allowing all exported and used symbols to be linked while still allowing them to be GCed.
Related #93791, #95363
r? `@petrochenkov`
cc `@carbotaniuman`
Stop using CRATE_DEF_INDEX outside of metadata encoding.
`CRATE_DEF_ID` and `CrateNum::as_def_id` are almost always what we want. We should not manipulate raw `DefIndex` outside of metadata encoding.
Refactor HIR item-like traversal (part 1)
Issue #95004
- Create hir_crate_items query which traverses tcx.hir_crate(()).owners to return a hir::ModuleItems
- use tcx.hir_crate_items in tcx.hir().items() to return an iterator of hir::ItemId
- use tcx.hir_crate_items to introduce a tcx.hir().par_items(impl Fn(hir::ItemId)) to traverse all items in parallel;
Signed-off-by: Miguel Guarniz <mi9uel9@gmail.com>
cc `@cjgillot`
Spellchecking compiler comments
This PR cleans up the rest of the spelling mistakes in the compiler comments. This PR does not change any literal or code spelling issues.
This allows to compute the `BodyOwnerKind` from `DefKind` only, and
removes a direct dependency of some MIR queries onto HIR.
As a side effect, it also simplifies metadata, since we don't need 4
flavours of `EntryKind::*Static` any more.
There are a few places were we have to construct it, though, and a few
places that are more invasive to change. To do this, we create a
constructor with a long obvious name.
Currently some `Allocation`s are interned, some are not, and it's very
hard to tell at a use point which is which.
This commit introduces `ConstAllocation` for the known-interned ones,
which makes the division much clearer. `ConstAllocation::inner()` is
used to get the underlying `Allocation`.
In some places it's natural to use an `Allocation`, in some it's natural
to use a `ConstAllocation`, and in some places there's no clear choice.
I've tried to make things look as nice as possible, while generally
favouring `ConstAllocation`, which is the type that embodies more
information. This does require quite a few calls to `inner()`.
The commit also tweaks how `PartialOrd` works for `Interned`. The
previous code was too clever by half, building on `T: Ord` to make the
code shorter. That caused problems with deriving `PartialOrd` and `Ord`
for `ConstAllocation`, so I changed it to build on `T: PartialOrd`,
which is slightly more verbose but much more standard and avoided the
problems.
Move ty::print methods to Drop-based scope guards
Primary goal is reducing codegen of the TLS access for each closure, which shaves ~3 seconds of bootstrap time over rustc as a whole.
Adopt let else in more places
Continuation of #89933, #91018, #91481, #93046, #93590, #94011.
I have extended my clippy lint to also recognize tuple passing and match statements. The diff caused by fixing it is way above 1 thousand lines. Thus, I split it up into multiple pull requests to make reviewing easier. This is the biggest of these PRs and handles the changes outside of rustdoc, rustc_typeck, rustc_const_eval, rustc_trait_selection, which were handled in PRs #94139, #94142, #94143, #94144.
Specifically, rename the `Const` struct as `ConstS` and re-introduce `Const` as
this:
```
pub struct Const<'tcx>(&'tcx Interned<ConstS>);
```
This now matches `Ty` and `Predicate` more closely, including using
pointer-based `eq` and `hash`.
Notable changes:
- `mk_const` now takes a `ConstS`.
- `Const` was copy, despite being 48 bytes. Now `ConstS` is not, so need a
we need separate arena for it, because we can't use the `Dropless` one any
more.
- Many `&'tcx Const<'tcx>`/`&Const<'tcx>` to `Const<'tcx>` changes
- Many `ct.ty` to `ct.ty()` and `ct.val` to `ct.val()` changes.
- Lots of tedious sigil fiddling.
Specifically, change `Ty` from this:
```
pub type Ty<'tcx> = &'tcx TyS<'tcx>;
```
to this
```
pub struct Ty<'tcx>(Interned<'tcx, TyS<'tcx>>);
```
There are two benefits to this.
- It's now a first class type, so we can define methods on it. This
means we can move a lot of methods away from `TyS`, leaving `TyS` as a
barely-used type, which is appropriate given that it's not meant to
be used directly.
- The uniqueness requirement is now explicit, via the `Interned` type.
E.g. the pointer-based `Eq` and `Hash` comes from `Interned`, rather
than via `TyS`, which wasn't obvious at all.
Much of this commit is boring churn. The interesting changes are in
these files:
- compiler/rustc_middle/src/arena.rs
- compiler/rustc_middle/src/mir/visit.rs
- compiler/rustc_middle/src/ty/context.rs
- compiler/rustc_middle/src/ty/mod.rs
Specifically:
- Most mentions of `TyS` are removed. It's very much a dumb struct now;
`Ty` has all the smarts.
- `TyS` now has `crate` visibility instead of `pub`.
- `TyS::make_for_test` is removed in favour of the static `BOOL_TY`,
which just works better with the new structure.
- The `Eq`/`Ord`/`Hash` impls are removed from `TyS`. `Interned`s impls
of `Eq`/`Hash` now suffice. `Ord` is now partly on `Interned`
(pointer-based, for the `Equal` case) and partly on `TyS`
(contents-based, for the other cases).
- There are many tedious sigil adjustments, i.e. adding or removing `*`
or `&`. They seem to be unavoidable.
[code coverage] Fix missing dead code in modules that are never called
The issue here is that the logic used to determine which CGU to put the dead function stubs in doesn't handle cases where a module is never assigned to a CGU (which is what happens when all of the code in the module is dead).
The partitioning logic also caused issues in #85461 where inline functions were duplicated into multiple CGUs resulting in duplicate symbols.
This commit fixes the issue by removing the complex logic used to assign dead code stubs to CGUs and replaces it with a much simpler model: we pick one CGU to hold all the dead code stubs. We pick a CGU which has exported items which increases the likelihood the linker won't throw away our dead functions and we pick the smallest to minimize the impact on compilation times for crates with very large CGUs.
Fixes#91661Fixes#86177Fixes#85718Fixes#79622
r? ```@tmandry```
cc ```@richkadel```
This PR is not urgent so please don't let it interrupt your holidays! 🎄🎁
Remove `NullOp::Box`
Follow up of #89030 and MCP rust-lang/compiler-team#460.
~1 month later nothing seems to be broken, apart from a small regression that #89332 (1aac85bb716c09304b313d69d30d74fe7e8e1a8e) shows could be regained by remvoing the diverging path, so it shall be safe to continue and remove `NullOp::Box` completely.
r? `@jonas-schievink`
`@rustbot` label T-compiler
The issue here is that the logic used to determine which CGU to put the
dead function stubs in doesn't handle cases where a module is never
assigned to a CGU.
The partitioning logic also caused issues in #85461 where inline
functions were duplicated into multiple CGUs resulting in duplicate
symbols.
This commit fixes the issue by removing the complex logic used to assign
dead code stubs to CGUs and replaces it with a much simplier model: we
pick one CGU to hold all the dead code stubs. We pick a CGU which has
exported items which increases the likelihood the linker won't throw
away our dead functions and we pick the smallest to minimize the impact
on compilation times for crates with very large CGUs.
Fixes#86177Fixes#85718Fixes#79622
By changing `as_str()` to take `&self` instead of `self`, we can just
return `&str`. We're still lying about lifetimes, but it's a smaller lie
than before, where `SymbolStr` contained a (fake) `&'static str`!
Record more artifact sizes during self-profiling.
This PR adds artifact size recording for
- "linked artifacts" (executables, RLIBs, dylibs, static libs)
- object files
- dwo files
- assembly files
- crate metadata
- LLVM bitcode files
- LLVM IR files
- codegen unit size estimates
Currently the identifiers emitted for these are hard-coded as string literals. Is it worth adding constants to https://github.com/rust-lang/measureme/blob/master/measureme/src/rustc.rs instead? We don't do that for query names and the like -- but artifact kinds might be more stable than query names.
Collect `panic/panic_bounds_check` during monomorphization
This would prevent link time errors if these functions are `#[inline]` (e.g. when `panic_immediate_abort` is used).
Fix#90405Fixrust-lang/cargo#10019
`@rustbot` label: T-compiler A-codegen
Adopt let_else across the compiler
This performs a substitution of code following the pattern:
```
let <id> = if let <pat> = ... { identity } else { ... : ! };
```
To simplify it to:
```
let <pat> = ... { identity } else { ... : ! };
```
By adopting the `let_else` feature (cc #87335).
The PR also updates the syn crate because the currently used version of the crate doesn't support `let_else` syntax yet.
Note: Generally I'm the person who *removes* usages of unstable features from the compiler, not adds more usages of them, but in this instance I think it hopefully helps the feature get stabilized sooner and in a better state. I have written a [comment](https://github.com/rust-lang/rust/issues/87335#issuecomment-944846205) on the tracking issue about my experience and what I feel could be improved before stabilization of `let_else`.
polymorphization: shims and predicates
Supersedes #75737 and #75414. This pull request includes up some changes to polymorphization which hadn't landed previously and gets stage2 bootstrapping and the test suite passing when polymorphization is enabled. There are still issues with `type_id` and polymorphization to investigate but this should get polymorphization in a reasonable state to work on.
- #75737 and #75414 both worked but were blocked on having the rest of the test suite pass (with polymorphization enabled) with and without the PRs. It makes more sense to just land these so that the changes are in.
- #75737's changes remove the restriction of `InstanceDef::Item` on polymorphization, so that shims can now be polymorphized. This won't have much of an effect until polymorphization's analysis is more advanced, but it doesn't hurt.
- #75414's changes remove all logic which marks parameters as used based on their presence in predicates - given #75675, this will enable more polymorphization and avoid the symbol clashes that predicate logic previously sidestepped.
- Polymorphization now explicitly checks (and skips) foreign items, this is necessary for stage2 bootstrapping to work when polymorphization is enabled.
- The conditional determining the emission of a note adding context to a post-monomorphization error has been modified. Polymorphization results in `optimized_mir` running for shims during collection where that wouldn't happen previously, some errors are emitted during `optimized_mir` and these were considered post-monomorphization errors with the existing logic (more errors and shims have a `DefId` coming from the std crate, not the local crate), adding a note that resulted in tests failing. It isn't particularly feasible to change where polymorphization runs or prevent it from using `optimized_mir`, so it seemed more reasonable to not change the conditional.
- `characteristic_def_id_of_type` was being invoked during partitioning for self types of impl blocks which had projections that depended on the value of unused generic parameters of a function - this caused a ICE in a debuginfo test. If partitioning is enabled and the instance needs substitution then this is skipped. That test still fails for me locally, but not with an ICE, but it fails in a fresh checkout too, so 🤷♂️.
r? `@lcnr`
This performs a substitution of code following the pattern:
let <id> = if let <pat> = ... { identity } else { ... : ! };
To simplify it to:
let <pat> = ... { identity } else { ... : ! };
By adopting the let_else feature.
`characteristic_def_id_of_type` was being invoked during partitioning
for self types of impl blocks which had projections that depended on the
value of unused generic parameters of a function, resulting in an ICE in
the 'generic-names' debuginfo test. If partitioning is enabled and the
instance needs substitution then this is now skipped.
Signed-off-by: David Wood <david.wood@huawei.com>
This commit removes the restriction of `InstanceDef::Item` on
polymorphization, so that shims can now be polymorphized.
Signed-off-by: David Wood <david.wood@huawei.com>
rustc adds notes to errors which happen post-monomorphization to
provide the user with helpful context (as these errors may rely on the
specific instantiations). To prevent this note being added where it is
not appropriate, the node is checked to originate outwith the current
crate. However, when polymorphization is enabled, this can result in
some errors (produced by `optimized_mir`) to occur earlier in
compilation than they normally would, during the collection of shims.
Some shims have ids that originate in the standard library, but these
should not receive the PME note, so instances for compiler-generated
functions no longer receive this note.
Signed-off-by: David Wood <david.wood@huawei.com>
This commit removes all logic which marks parameters as used based on
their presence in predicates - given rust-lang/rust#75675, this will
enable more polymorphization and avoid the symbol clashes that predicate
logic previously sidestepped.
Signed-off-by: David Wood <david@davidtw.co>
Specify a log level in tracing instrument macro explicitly.
Additionally reduce the used log level from a default info level to a
debug level (all of those appear to be developer oriented logs, so there
should be no need to include them in release builds).
