This ensures that all external traits are run through the same filters that the
rest of the AST goes through, stripping hidden function as necessary.
Closes#13698
This is due to a [breaking-change] to operators. The primary affected
code is uses of the `Rng` trait where we used to (incorrectly) infer the
right-hand-side type from the left-hand-side, in the case that the LHS
type was a scalar like `i32`. The fix is to add a type annotation like
`x + rng.gen::<i32>()`.
This PR introduces a `Reflect` marker trait which is a supertrait of `Any`. The idea is that `Reflect` is defined for all concrete types, but is not defined for type parameters unless there is a `T:Reflect` bound. This is intended to preserve the parametricity property. This allows the `Any` interface to be stabilized without committing us to unbounded reflection that is not easily detectable by the caller.
The implementation of `Reflect` relies on an experimental variant of OIBIT. This variant behaves differently for objects, since it requires that all types exposed as part of the object's *interface* are `Reflect`, but isn't concerned about other types that may be closed over. In other words, you don't have to write `Foo+Reflect` in order for `Foo: Reflect` to hold (where `Foo` is a trait).
Given that `Any` is slated to stabilization and hence that we are committed to some form of reflection, the goal of this PR is to leave our options open with respect to parametricity. I see the options for full stabilization as follows (I think an RFC would be an appropriate way to confirm whichever of these three routes we take):
1. We make `Reflect` a lang-item.
2. We stabilize some version of the OIBIT variation I implemented as a general mechanism that may be appropriate for other use cases.
3. We give up on preserving parametricity here and just have `impl<T> Reflect for T` instead. In that case, `Reflect` is a harmless but not especially useful trait going forward.
cc @aturon
cc @alexcrichton
cc @glaebhoerl (this is more-or-less your proposal, as I understood it)
cc @reem (this is more-or-less what we discussed on IRC at some point)
cc @FlaPer87 (vaguely pertains to OIBIT)
This PR adds support for associated types to the `#[derive(...)]` syntax extension. In order to do this, it switches over to using where predicates to apply the type constraints. So now this:
```rust
type Trait {
type Type;
}
#[derive(Clone)]
struct Foo<A> where A: Trait {
a: A,
b: <A as Trait>::Type,
}
```
Gets expended into this impl:
```rust
impl<A: Clone> Clone for Foo<A> where
A: Trait,
<A as Trait>::Type: Clone,
{
fn clone(&self) -> Foo<T> {
Foo {
a: self.a.clone(),
b: self.b.clone(),
}
}
}
```
Reject specialized Drop impls.
See Issue #8142 for discussion.
This makes it illegal for a Drop impl to be more specialized than the original item.
So for example, all of the following are now rejected (when they would have been blindly accepted before):
```rust
struct S<A> { ... };
impl Drop for S<i8> { ... } // error: specialized to concrete type
struct T<'a> { ... };
impl Drop for T<'static> { ... } // error: specialized to concrete region
struct U<A> { ... };
impl<A:Clone> Drop for U<A> { ... } // error: added extra type requirement
struct V<'a,'b>;
impl<'a,'b:a> Drop for V<'a,'b> { ... } // error: added extra region requirement
```
Due to examples like the above, this is a [breaking-change].
(The fix is to either remove the specialization from the `Drop` impl, or to transcribe the requirements into the struct/enum definition; examples of both are shown in the PR's fixed to `libstd`.)
----
This is likely to be the last thing blocking the removal of the `#[unsafe_destructor]` attribute.
Fix#8142Fix#23584
The compiler will now issue a warning for crates that have syntax of the form
`extern crate "foo" as bar`, but it will still continue to accept this syntax.
Additionally, the string `foo-bar` will match the crate name `foo_bar` to assist
in the transition period as well.
This patch will land hopefully in tandem with a Cargo patch that will start
translating all crate names to have underscores instead of hyphens.
cc #23533
The compiler will now issue a warning for crates that have syntax of the form
`extern crate "foo" as bar`, but it will still continue to accept this syntax.
Additionally, the string `foo-bar` will match the crate name `foo_bar` to assist
in the transition period as well.
This patch will land hopefully in tandem with a Cargo patch that will start
translating all crate names to have underscores instead of hyphens.
cc #23533
See Issue 8142 for discussion.
This makes it illegal for a Drop impl to be more specialized than the
original item.
So for example, all of the following are now rejected (when they would
have been blindly accepted before):
```rust
struct S<A> { ... };
impl Drop for S<i8> { ... } // error: specialized to concrete type
struct T<'a> { ... };
impl Drop for T<'static> { ... } // error: specialized to concrete region
struct U<A> { ... };
impl<A:Clone> Drop for U<A> { ... } // error: added extra type requirement
struct V<'a,'b>;
impl<'a,'b:a> Drop for V<'a,'b> { ... } // error: added extra region requirement
```
Due to examples like the above, this is a [breaking-change].
(The fix is to either remove the specialization from the `Drop` impl,
or to transcribe the requirements into the struct/enum definition;
examples of both are shown in the PR's fixed to `libstd`.)
----
This is likely to be the last thing blocking the removal of the
`#[unsafe_destructor]` attribute.
Includes two new error codes for the new dropck check.
Update run-pass tests to accommodate new dropck pass.
Update tests and docs to reflect new destructor restriction.
----
Implementation notes:
We identify Drop impl specialization by not being as parametric as the
struct/enum definition via unification.
More specifically:
1. Attempt unification of a skolemized instance of the struct/enum
with an instance of the Drop impl's type expression where all of
the impl's generics (i.e. the free variables of the type
expression) have been replaced with unification variables.
2. If unification fails, then reject Drop impl as specialized.
3. If unification succeeds, check if any of the skolemized
variables "leaked" into the constraint set for the inference
context; if so, then reject Drop impl as specialized.
4. Otherwise, unification succeeded without leaking skolemized
variables: accept the Drop impl.
We identify whether a Drop impl is injecting new predicates by simply
looking whether the predicate, after an appropriate substitution,
appears on the struct/enum definition.
This permits all coercions to be performed in casts, but adds lints to warn in those cases.
Part of this patch moves cast checking to a later stage of type checking. We acquire obligations to check casts as part of type checking where we previously checked them. Once we have type checked a function or module, then we check any cast obligations which have been acquired. That means we have more type information available to check casts (this was crucial to making coercions work properly in place of some casts), but it means that casts cannot feed input into type inference.
[breaking change]
* Adds two new lints for trivial casts and trivial numeric casts, these are warn by default, but can cause errors if you build with warnings as errors. Previously, trivial numeric casts and casts to trait objects were allowed.
* The unused casts lint has gone.
* Interactions between casting and type inference have changed in subtle ways. Two ways this might manifest are:
- You may need to 'direct' casts more with extra type information, for example, in some cases where `foo as _ as T` succeeded, you may now need to specify the type for `_`
- Casts do not influence inference of integer types. E.g., the following used to type check:
```
let x = 42;
let y = &x as *const u32;
```
Because the cast would inform inference that `x` must have type `u32`. This no longer applies and the compiler will fallback to `i32` for `x` and thus there will be a type error in the cast. The solution is to add more type information:
```
let x: u32 = 42;
let y = &x as *const u32;
```
This commit removes the reexports of `old_io` traits as well as `old_path` types
and traits from the prelude. This functionality is now all deprecated and needs
to be removed to make way for other functionality like `Seek` in the `std::io`
module (currently reexported as `NewSeek` in the io prelude).
Closes#23377Closes#23378
This commit stabilizes essentially all of the new `std::path` API. The
API itself is changed in a couple of ways (which brings it in closer
alignment with the RFC):
* `.` components are now normalized away, unless they appear at the
start of a path. This in turn effects the semantics of e.g. asking for
the file name of `foo/` or `foo/.`, both of which yield `Some("foo")`
now. This semantics is what the original RFC specified, and is also
desirable given early experience rolling out the new API.
* The `parent` method is now `without_file` and succeeds if, and only
if, `file_name` is `Some(_)`. That means, in particular, that it fails
for a path like `foo/../`. This change affects `pop` as well.
In addition, the `old_path` module is now deprecated.
[breaking-change]
r? @alexcrichton
This commit stabilizes essentially all of the new `std::path` API. The
API itself is changed in a couple of ways (which brings it in closer
alignment with the RFC):
* `.` components are now normalized away, unless they appear at the
start of a path. This in turn effects the semantics of e.g. asking for
the file name of `foo/` or `foo/.`, both of which yield `Some("foo")`
now. This semantics is what the original RFC specified, and is also
desirable given early experience rolling out the new API.
* The `parent` function now succeeds if, and only if, the path has at
least one non-root/prefix component. This change affects `pop` as
well.
* The `Prefix` component now involves a separate `PrefixComponent`
struct, to better allow for keeping both parsed and unparsed prefix data.
In addition, the `old_path` module is now deprecated.
Closes#23264
[breaking-change]
This is a hack, but I don't think we can do much better as long as `derive` is running at the syntax expansion phase.
If the `custom_derive` feature gate is enabled, this works with user-defined traits and syntax extensions. Without the gate, you can't use e.g. `#[derive_Clone]` directly, so this does not change the stable language.
To make this effective, we now check gated attributes both before and after macro expansion. This uncovered a number of tests that were missing feature gates.
This PR also cleans up the deriving code somewhat, and forbids some previously-meaningless attribute syntax. For this reason it's technically a
[breaking-change]
r? @sfackler
This is a hack, but I don't think we can do much better as long as `derive` is
running at the syntax expansion phase.
If the custom_derive feature gate is enabled, this works with user-defined
traits and syntax extensions. Without the gate, you can't use e.g. #[derive_Clone]
directly, so this does not change the stable language.
This commit also cleans up the deriving code somewhat, and forbids some
previously-meaningless attribute syntax. For this reason it's technically a
[breaking-change]
since there are separate checks that apply to Copy (and Send uses the
generic defaulted trait rules). Also prohibit `Sized` from being
manually implemented for now.
Unstable items used in a macro expansion will now always trigger
stability warnings, *unless* the unstable items are directly inside a
macro marked with `#[allow_internal_unstable]`. IOW, the compiler warns
unless the span of the unstable item is a subspan of the definition of a
macro marked with that attribute.
E.g.
#[allow_internal_unstable]
macro_rules! foo {
($e: expr) => {{
$e;
unstable(); // no warning
only_called_by_foo!();
}}
}
macro_rules! only_called_by_foo {
() => { unstable() } // warning
}
foo!(unstable()) // warning
The unstable inside `foo` is fine, due to the attribute. But the
`unstable` inside `only_called_by_foo` is not, since that macro doesn't
have the attribute, and the `unstable` passed into `foo` is also not
fine since it isn't contained in the macro itself (that is, even though
it is only used directly in the macro).
In the process this makes the stability tracking much more precise,
e.g. previously `println!("{}", unstable())` got no warning, but now it
does. As such, this is a bug fix that may cause [breaking-change]s.
The attribute is definitely feature gated, since it explicitly allows
side-stepping the feature gating system.
---
This updates `thread_local!` macro to use the attribute, since it uses
unstable features internally (initialising a struct with unstable
fields).
Unstable items used in a macro expansion will now always trigger
stability warnings, *unless* the unstable items are directly inside a
macro marked with `#[allow_internal_unstable]`. IOW, the compiler warns
unless the span of the unstable item is a subspan of the definition of a
macro marked with that attribute.
E.g.
#[allow_internal_unstable]
macro_rules! foo {
($e: expr) => {{
$e;
unstable(); // no warning
only_called_by_foo!();
}}
}
macro_rules! only_called_by_foo {
() => { unstable() } // warning
}
foo!(unstable()) // warning
The unstable inside `foo` is fine, due to the attribute. But the
`unstable` inside `only_called_by_foo` is not, since that macro doesn't
have the attribute, and the `unstable` passed into `foo` is also not
fine since it isn't contained in the macro itself (that is, even though
it is only used directly in the macro).
In the process this makes the stability tracking much more precise,
e.g. previously `println!(\"{}\", unstable())` got no warning, but now it
does. As such, this is a bug fix that may cause [breaking-change]s.
The attribute is definitely feature gated, since it explicitly allows
side-stepping the feature gating system.
---
This updates `thread_local!` macro to use the attribute, since it uses
unstable features internally (initialising a struct with unstable
fields).
Unstable items used in a macro expansion will now always trigger
stability warnings, *unless* the unstable items are directly inside a
macro marked with `#[allow_internal_unstable]`. IOW, the compiler warns
unless the span of the unstable item is a subspan of the definition of a
macro marked with that attribute.
E.g.
#[allow_internal_unstable]
macro_rules! foo {
($e: expr) => {{
$e;
unstable(); // no warning
only_called_by_foo!();
}}
}
macro_rules! only_called_by_foo {
() => { unstable() } // warning
}
foo!(unstable()) // warning
The unstable inside `foo` is fine, due to the attribute. But the
`unstable` inside `only_called_by_foo` is not, since that macro doesn't
have the attribute, and the `unstable` passed into `foo` is also not
fine since it isn't contained in the macro itself (that is, even though
it is only used directly in the macro).
In the process this makes the stability tracking much more precise,
e.g. previously `println!("{}", unstable())` got no warning, but now it
does. As such, this is a bug fix that may cause [breaking-change]s.
The attribute is definitely feature gated, since it explicitly allows
side-stepping the feature gating system.
