From 72 bytes to 12 bytes (on x86-64).
There are two parts to this:
- Changing various source code offsets from 64-bit to 32-bit. This is
not a problem because the rest of rustc also uses 32-bit source code
offsets. This means `Token` is no longer `Copy` but this causes no
problems.
- Removing the `RawStrError` from `LiteralKind`. Raw string literal
invalidity is now indicated by a `None` value within
`RawStr`/`RawByteStr`, and the new `validate_raw_str` function can be
used to re-lex an invalid raw string literal to get the `RawStrError`.
There is one very small change in behaviour. Previously, if a raw string
literal matched both the `InvalidStarter` and `TooManyHashes` cases,
the latter would override the former. This has now changed, because
`raw_double_quoted_string` now uses `?` and so returns immediately upon
detecting the `InvalidStarter` case. I think this is a slight
improvement to report the earlier-detected error, and it explains the
change in the `test_too_many_hashes` test.
The commit also removes a couple of comments that refer to #77629 and
say that the size of these types don't affect performance. These
comments are wrong, though the performance effect is small.
Rollup of 5 pull requests
Successful merges:
- #99311 (change maybe_body_owned_by to take local def id)
- #99862 (Improve type mismatch w/ function signatures)
- #99895 (don't call type ascription "cast")
- #99900 (remove some manual hash stable impls)
- #99903 (Add diagnostic when using public instead of pub)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Remove `TreeAndSpacing`.
A `TokenStream` contains a `Lrc<Vec<(TokenTree, Spacing)>>`. But this is
not quite right. `Spacing` makes sense for `TokenTree::Token`, but does
not make sense for `TokenTree::Delimited`, because a
`TokenTree::Delimited` cannot be joined with another `TokenTree`.
This commit fixes this problem, by adding `Spacing` to `TokenTree::Token`,
changing `TokenStream` to contain a `Lrc<Vec<TokenTree>>`, and removing the
`TreeAndSpacing` typedef.
The commit removes these two impls:
- `impl From<TokenTree> for TokenStream`
- `impl From<TokenTree> for TreeAndSpacing`
These were useful, but also resulted in code with many `.into()` calls
that was hard to read, particularly for anyone not highly familiar with
the relevant types. This commit makes some other changes to compensate:
- `TokenTree::token()` becomes `TokenTree::token_{alone,joint}()`.
- `TokenStream::token_{alone,joint}()` are added.
- `TokenStream::delimited` is added.
This results in things like this:
```rust
TokenTree::token(token::Semi, stmt.span).into()
```
changing to this:
```rust
TokenStream::token_alone(token::Semi, stmt.span)
```
This makes the type of the result, and its spacing, clearer.
These changes also simplifies `Cursor` and `CursorRef`, because they no longer
need to distinguish between `next` and `next_with_spacing`.
r? `@petrochenkov`
A `TokenStream` contains a `Lrc<Vec<(TokenTree, Spacing)>>`. But this is
not quite right. `Spacing` makes sense for `TokenTree::Token`, but does
not make sense for `TokenTree::Delimited`, because a
`TokenTree::Delimited` cannot be joined with another `TokenTree`.
This commit fixes this problem, by adding `Spacing` to `TokenTree::Token`,
changing `TokenStream` to contain a `Lrc<Vec<TokenTree>>`, and removing the
`TreeAndSpacing` typedef.
The commit removes these two impls:
- `impl From<TokenTree> for TokenStream`
- `impl From<TokenTree> for TreeAndSpacing`
These were useful, but also resulted in code with many `.into()` calls
that was hard to read, particularly for anyone not highly familiar with
the relevant types. This commit makes some other changes to compensate:
- `TokenTree::token()` becomes `TokenTree::token_{alone,joint}()`.
- `TokenStream::token_{alone,joint}()` are added.
- `TokenStream::delimited` is added.
This results in things like this:
```rust
TokenTree::token(token::Semi, stmt.span).into()
```
changing to this:
```rust
TokenStream::token_alone(token::Semi, stmt.span)
```
This makes the type of the result, and its spacing, clearer.
These changes also simplifies `Cursor` and `CursorRef`, because they no longer
need to distinguish between `next` and `next_with_spacing`.
Generate correct suggestion with named arguments used positionally
Address issue #99265 by checking each positionally used argument
to see if the argument is named and adding a lint to use the name
instead. This way, when named arguments are used positionally in a
different order than their argument order, the suggested lint is
correct.
For example:
```
println!("{b} {}", a=1, b=2);
```
This will now generate the suggestion:
```
println!("{b} {a}", a=1, b=2);
```
Additionally, this check now also correctly replaces or inserts
only where the positional argument is (or would be if implicit).
Also, width and precision are replaced with their argument names
when they exists.
Since the issues were so closely related, this fix for issue #99265
also fixes issue #99266.
Fixes#99265Fixes#99266
Some command-line options accessible through `sess.opts` are best
accessed through wrapper functions on `Session`, `TyCtxt` or otherwise,
rather than through field access on the option struct in the `Session`.
Adds a new lint which triggers on those options that should be accessed
through a wrapper function so that this is prohibited. Options are
annotated with a new attribute `rustc_lint_opt_deny_field_access` which
can specify the error message (i.e. "use this other function instead")
to be emitted.
A simpler alternative would be to simply rename the options in the
option type so that it is clear they should not be used, however this
doesn't prevent uses, just discourages them. Another alternative would
be to make the option fields private, and adding accessor functions on
the option types, however the wrapper functions sometimes rely on
additional state from `Session` or `TyCtxt` which wouldn't be available
in an function on the option type, so the accessor would simply make the
field available and its use would be discouraged too.
Signed-off-by: David Wood <david.wood@huawei.com>
Resolve function lifetime elision on the AST
~Based on https://github.com/rust-lang/rust/pull/97720~
Lifetime elision for functions is purely syntactic in nature, so can be resolved on the AST.
This PR replicates the elision logic and diagnostics on the AST, and replaces HIR-based resolution by a `delay_span_bug`.
This refactor allows for more consistent diagnostics, which don't have to guess the original code from HIR.
r? `@petrochenkov`
Address issue #99265 by checking each positionally used argument
to see if the argument is named and adding a lint to use the name
instead. This way, when named arguments are used positionally in a
different order than their argument order, the suggested lint is
correct.
For example:
```
println!("{b} {}", a=1, b=2);
```
This will now generate the suggestion:
```
println!("{b} {a}", a=1, b=2);
```
Additionally, this check now also correctly replaces or inserts
only where the positional argument is (or would be if implicit).
Also, width and precision are replaced with their argument names
when they exists.
Since the issues were so closely related, this fix for issue #99265
also fixes issue #99266.
Fixes#99265Fixes#99266
Implement `for<>` lifetime binder for closures
This PR implements RFC 3216 ([TI](https://github.com/rust-lang/rust/issues/97362)) and allows code like the following:
```rust
let _f = for<'a, 'b> |a: &'a A, b: &'b B| -> &'b C { b.c(a) };
// ^^^^^^^^^^^--- new!
```
cc ``@Aaron1011`` ``@cjgillot``
Always create elided lifetime parameters for functions
Anonymous and elided lifetimes in functions are sometimes (async fns) --and sometimes not (regular fns)-- desugared to implicit generic parameters.
This difference of treatment makes it some downstream analyses more complicated to handle. This step is a pre-requisite to perform lifetime elision resolution on AST.
There is currently an inconsistency in the treatment of argument-position impl-trait for functions and async fns:
```rust
trait Foo<'a> {}
fn foo(t: impl Foo<'_>) {} //~ ERROR missing lifetime specifier
async fn async_foo(t: impl Foo<'_>) {} //~ OK
fn bar(t: impl Iterator<Item = &'_ u8>) {} //~ ERROR missing lifetime specifier
async fn async_bar(t: impl Iterator<Item = &'_ u8>) {} //~ OK
```
The current implementation reports "missing lifetime specifier" on `foo`, but **accepts it** in `async_foo`.
This PR **proposes to accept** the anonymous lifetime in both cases as an extra generic lifetime parameter.
This change would be insta-stable, so let's ping t-lang.
Anonymous lifetimes in GAT bindings keep being forbidden:
```rust
fn foo(t: impl Foo<Assoc<'_> = Bar<'_>>) {}
^^ ^^
forbidden ok
```
I started a discussion here: https://rust-lang.zulipchat.com/#narrow/stream/213817-t-lang/topic/Anonymous.20lifetimes.20in.20universal.20impl-trait/near/284968606
r? ``@petrochenkov``
Pull Derefer before ElaborateDrops
_Follow up work to #97025#96549#96116#95887 #95649_
This moves `Derefer` before `ElaborateDrops` and creates a new `Rvalue` called `VirtualRef` that allows us to bypass many constraints for `DerefTemp`.
r? `@oli-obk`
Lower let-else in MIR
This MR will switch to lower let-else statements in MIR building instead.
To lower let-else in MIR, we build a mini-switch two branches. One branch leads to the matching case, and the other leads to the `else` block. This arrangement will allow temporary lifetime analysis running as-is so that the temporaries are properly extended according to the same rule applied to regular `let` statements.
cc https://github.com/rust-lang/rust/issues/87335Fix#98672
Build the Clippy book as part of x.py doc
r? ``@ehuss`` since you said you would be interested in helping moving this forward.
cc ``@jyn514`` as part of the bootstrap team.
Add test for and fix rust-lang/rust-clippy#9131
This lint seems to have been broken by #98446 -- but of course, there was no clippy test for this case at the time.
`expr.span.ctxt().outer_expn_data()` now has `MacroKind::Derive` instead of `MacroKind::Attr` for something like:
```
#[derive(Clone, Debug)]
pub struct UnderscoreInStruct {
_foo: u32,
}
```
---
changelog: none
closes: https://github.com/rust-lang/rust-clippy/issues/9131
