Error messages cleaned in librustc/middle
Error messages cleaned in libsyntax
Error messages cleaned in libsyntax more agressively
Error messages cleaned in librustc more aggressively
Fixed affected tests
Fixed other failing tests
Last failing tests fixed
This commit removes the -c, --emit-llvm, -s, --rlib, --dylib, --staticlib,
--lib, and --bin flags from rustc, adding the following flags:
* --emit=[asm,ir,bc,obj,link]
* --crate-type=[dylib,rlib,staticlib,bin,lib]
The -o option has also been redefined to be used for *all* flavors of outputs.
This means that we no longer ignore it for libraries. The --out-dir remains the
same as before.
The new logic for files that rustc emits is as follows:
1. Output types are dictated by the --emit flag. The default value is
--emit=link, and this option can be passed multiple times and have all
options stacked on one another.
2. Crate types are dictated by the --crate-type flag and the #[crate_type]
attribute. The flags can be passed many times and stack with the crate
attribute.
3. If the -o flag is specified, and only one output type is specified, the
output will be emitted at this location. If more than one output type is
specified, then the filename of -o is ignored, and all output goes in the
directory that -o specifies. The -o option always ignores the --out-dir
option.
4. If the --out-dir flag is specified, all output goes in this directory.
5. If -o and --out-dir are both not present, all output goes in the current
directory of the process.
6. When multiple output types are specified, the filestem of all output is the
same as the name of the CrateId (derived from a crate attribute or from the
filestem of the crate file).
Closes#7791Closes#11056Closes#11667
By default, the compiler and libraries are all still built with rpaths, but this
can be opted out of with --disable-rpath to ./configure or --no-rpath to rustc.
Closes#5219
By default, the compiler and libraries are all still built with rpaths, but this
can be opted out of with --disable-rpath to ./configure or --no-rpath to rustc.
cc #5219
A mutable and immutable borrow place some restrictions on what you can
with the variable until the borrow ends. This commit attempts to convey
to the user what those restrictions are. Also, if the original borrow is
a mutable borrow, the error message has been changed (more specifically,
i. "cannot borrow `x` as immutable because it is also borrowed as
mutable" and ii. "cannot borrow `x` as mutable more than once" have
been changed to "cannot borrow `x` because it is already borrowed as
mutable").
In addition, this adds a (custom) span note to communicate where the
original borrow ends.
```rust
fn main() {
match true {
true => {
let mut x = 1;
let y = &x;
let z = &mut x;
}
false => ()
}
}
test.rs:6:21: 6:27 error: cannot borrow `x` as mutable because it is already borrowed as immutable
test.rs:6 let z = &mut x;
^~~~~~
test.rs:5:21: 5:23 note: previous borrow of `x` occurs here; the immutable borrow prevents subsequent moves or mutable borrows of `x` until the borrow ends
test.rs:5 let y = &x;
^~
test.rs:7:10: 7:10 note: previous borrow ends here
test.rs:3 true => {
test.rs:4 let mut x = 1;
test.rs:5 let y = &x;
test.rs:6 let z = &mut x;
test.rs:7 }
^
```
```rust
fn foo3(t0: &mut &mut int) {
let t1 = &mut *t0;
let p: &int = &**t0;
}
fn main() {}
test.rs:3:19: 3:24 error: cannot borrow `**t0` because it is already borrowed as mutable
test.rs:3 let p: &int = &**t0;
^~~~~
test.rs:2:14: 2:22 note: previous borrow of `**t0` as mutable occurs here; the mutable borrow prevents subsequent moves, borrows, or modification of `**t0` until the borrow ends
test.rs:2 let t1 = &mut *t0;
^~~~~~~~
test.rs:4:2: 4:2 note: previous borrow ends here
test.rs:1 fn foo3(t0: &mut &mut int) {
test.rs:2 let t1 = &mut *t0;
test.rs:3 let p: &int = &**t0;
test.rs:4 }
^
```
For the "previous borrow ends here" note, if the span is too long (has too many lines), then only the first and last lines are printed, and the middle is replaced with dot dot dot:
```rust
fn foo3(t0: &mut &mut int) {
let t1 = &mut *t0;
let p: &int = &**t0;
}
fn main() {}
test.rs:3:19: 3:24 error: cannot borrow `**t0` because it is already borrowed as mutable
test.rs:3 let p: &int = &**t0;
^~~~~
test.rs:2:14: 2:22 note: previous borrow of `**t0` as mutable occurs here; the mutable borrow prevents subsequent moves, borrows, or modification of `**t0` until the borrow ends
test.rs:2 let t1 = &mut *t0;
^~~~~~~~
test.rs:7:2: 7:2 note: previous borrow ends here
test.rs:1 fn foo3(t0: &mut &mut int) {
...
test.rs:7 }
^
```
(Sidenote: the `span_end_note` currently also has issue #11715)
A mutable and immutable borrow place some restrictions on what you can
with the variable until the borrow ends. This commit attempts to convey
to the user what those restrictions are. Also, if the original borrow is
a mutable borrow, the error message has been changed (more specifically,
i. "cannot borrow `x` as immutable because it is also borrowed as
mutable" and ii. "cannot borrow `x` as mutable more than once" have
been changed to "cannot borrow `x` because it is already borrowed as
mutable").
In addition, this adds a (custom) span note to communicate where the
original borrow ends.
Right now the --crate-id and related flags are all process *after* the entire
crate is parsed. This is less than desirable when used with makefiles because it
means that just to learn the output name of the crate you have to parse the
entire crate (unnecessary).
This commit changes the behavior to lift the handling of these flags much sooner
in the compilation process. This allows us to not have to parse the entire crate
and only have to worry about parsing the crate attributes themselves. The
related methods have all been updated to take an array of attributes rather than
a crate.
Additionally, this ceases duplication of the "what output are we producing"
logic in order to correctly handle things in the case of --test.
Finally, this adds tests for all of this functionality to ensure that it does
not regress.
By performing this logic very late in the build process, it ended up leading to
bugs like those found in #10973 where certain stages of the build process
expected a particular output format which didn't end up being the case. In order
to fix this, the build output generation is moved very early in the build
process to the absolute first thing in phase 2.
Closes#10973
When performing LTO, the rust compiler has an opportunity to completely strip
all landing pads in all dependent libraries. I've modified the LTO pass to
recognize the -Z no-landing-pads option when also running an LTO pass to flag
everything in LLVM as nothrow. I've verified that this prevents any and all
invoke instructions from being emitted.
I believe that this is one of our best options for moving forward with
accomodating use-cases where unwinding doesn't really make sense. This will
allow libraries to be built with landing pads by default but allow usage of them
in contexts where landing pads aren't necessary.
When --dep-info is given, rustc will write out a `$input_base.d` file in the
output directory that contains Makefile compatible dependency information for
use with tools like make and ninja.
When performing LTO, the rust compiler has an opportunity to completely strip
all landing pads in all dependent libraries. I've modified the LTO pass to
recognize the -Z no-landing-pads option when also running an LTO pass to flag
everything in LLVM as nothrow. I've verified that this prevents any and all
invoke instructions from being emitted.
I believe that this is one of our best options for moving forward with
accomodating use-cases where unwinding doesn't really make sense. This will
allow libraries to be built with landing pads by default but allow usage of them
in contexts where landing pads aren't necessary.
cc #10780
This commit implements LTO for rust leveraging LLVM's passes. What this means
is:
* When compiling an rlib, in addition to insdering foo.o into the archive, also
insert foo.bc (the LLVM bytecode) of the optimized module.
* When the compiler detects the -Z lto option, it will attempt to perform LTO on
a staticlib or binary output. The compiler will emit an error if a dylib or
rlib output is being generated.
* The actual act of performing LTO is as follows:
1. Force all upstream libraries to have an rlib version available.
2. Load the bytecode of each upstream library from the rlib.
3. Link all this bytecode into the current LLVM module (just using llvm
apis)
4. Run an internalization pass which internalizes all symbols except those
found reachable for the local crate of compilation.
5. Run the LLVM LTO pass manager over this entire module
6a. If assembling an archive, then add all upstream rlibs into the output
archive. This ignores all of the object/bitcode/metadata files rust
generated and placed inside the rlibs.
6b. If linking a binary, create copies of all upstream rlibs, remove the
rust-generated object-file, and then link everything as usual.
As I have explained in #10741, this process is excruciatingly slow, so this is
*not* turned on by default, and it is also why I have decided to hide it behind
a -Z flag for now. The good news is that the binary sizes are about as small as
they can be as a result of LTO, so it's definitely working.
Closes#10741Closes#10740
The main one removed is rust_upcall_reset_stack_limit (continuation of #10156),
and this also removes the upcall_trace function. The was hidden behind a
`-Z trace` flag, but if you attempt to use this now you'll get a linker error
because there is no implementation of the 'upcall_trace' function. Due to this
no longer working, I decided to remove it entirely from the compiler (I'm also a
little unsure on what it did in the first place).
LLVM's JIT has been updated numerous times, and we haven't been tracking it at
all. The existing LLVM glue code no longer compiles, and the JIT isn't used for
anything currently.
This also rebases out the FixedStackSegment support which we have added to LLVM.
None of this is still in use by the compiler, and there's no need to keep this
functionality around inside of LLVM.
This is needed to unblock #10708 (where we're tripping an LLVM assertion).
