This commit takes a first pass at stabilizing `std::thread`:
* It removes the `detach` method in favor of two constructors -- `spawn`
for detached threads, `scoped` for "scoped" (i.e., must-join)
threads. This addresses some of the surprise/frustrating debug
sessions with the previous API, in which `spawn` produced a guard that
on destruction joined the thread (unless `detach` was called).
The reason to have the division in part is that `Send` will soon not
imply `'static`, which means that `scoped` thread creation can take a
closure over *shared stack data* of the parent thread. On the other
hand, this means that the parent must not pop the relevant stack
frames while the child thread is running. The `JoinGuard` is used to
prevent this from happening by joining on drop (if you have not
already explicitly `join`ed.) The APIs around `scoped` are
future-proofed for the `Send` changes by taking an additional lifetime
parameter. With the current definition of `Send`, this is forced to be
`'static`, but when `Send` changes these APIs will gain their full
flexibility immediately.
Threads that are `spawn`ed, on the other hand, are detached from the
start and do not yield an RAII guard.
The hope is that, by making `scoped` an explicit opt-in with a very
suggestive name, it will be drastically less likely to be caught by a
surprising deadlock due to an implicit join at the end of a scope.
* The module itself is marked stable.
* Existing methods other than `spawn` and `scoped` are marked stable.
The migration path is:
```rust
Thread::spawn(f).detached()
```
becomes
```rust
Thread::spawn(f)
```
while
```rust
let res = Thread::spawn(f);
res.join()
```
becomes
```rust
let res = Thread::scoped(f);
res.join()
```
[breaking-change]
fmt::Show is for debugging, and can and should be implemented for
all public types. This trait is used with `{:?}` syntax. There still
exists #[derive(Show)].
fmt::String is for types that faithfully be represented as a String.
Because of this, there is no way to derive fmt::String, all
implementations must be purposeful. It is used by the default format
syntax, `{}`.
This will break most instances of `{}`, since that now requires the type
to impl fmt::String. In most cases, replacing `{}` with `{:?}` is the
correct fix. Types that were being printed specifically for users should
receive a fmt::String implementation to fix this.
Part of #20013
[breaking-change]
This removes a large array of deprecated functionality, regardless of how
recently it was deprecated. The purpose of this commit is to clean out the
standard libraries and compiler for the upcoming alpha release.
Some notable compiler changes were to enable warnings for all now-deprecated
command line arguments (previously the deprecated versions were silently
accepted) as well as removing deriving(Zero) entirely (the trait was removed).
The distribution no longer contains the libtime or libregex_macros crates. Both
of these have been deprecated for some time and are available externally.
This patch marks `PartialEq`, `Eq`, `PartialOrd`, and `Ord` as
`#[stable]`, as well as the majorify of manual implementaitons of these
traits. The traits match the [reform
RFC](https://github.com/rust-lang/rfcs/pull/439).
Along the way, two changes are made:
* The recently-added type parameters for `Ord` and `Eq` are
removed. These were mistakenly added while adding them to `PartialOrd`
and `PartialEq`, but they don't make sense given the laws that are
required for (and use cases for) `Ord` and `Eq`.
* More explicit laws are added for `PartialEq` and `PartialOrd`,
connecting them to their associated mathematical concepts.
In the future, many of the impls should be generalized; see
since generalizing later is not a breaking change.
[breaking-change]
This commit performs a second pass for stabilization over the `std::ptr` module.
The specific actions taken were:
* The `RawPtr` trait was renamed to `PtrExt`
* The `RawMutPtr` trait was renamed to `PtrMutExt`
* The module name `ptr` is now stable.
* These functions were all marked `#[stable]` with no modification:
* `null`
* `null_mut`
* `swap`
* `replace`
* `read`
* `write`
* `PtrExt::is_null`
* `PtrExt::is_not_null`
* `PtrExt::offset`
* These functions remain unstable:
* `as_ref`, `as_mut` - the return value of an `Option` is not fully expressive
as null isn't the only bad value, and it's unclear
whether we want to commit to these functions at this
time. The reference/lifetime semantics as written are
also problematic in how they encourage arbitrary
lifetimes.
* `zero_memory` - This function is currently not used at all in the
distribution, and in general it plays a broader role in the
"working with unsafe pointers" story. This story is not yet
fully developed, so at this time the function remains
unstable for now.
* `read_and_zero` - This function remains unstable for largely the same
reasons as `zero_memory`.
* These functions are now all deprecated:
* `PtrExt::null` - call `ptr::null` or `ptr::null_mut` instead.
* `PtrExt::to_uint` - use an `as` expression instead.
This commit performs a second pass for stabilization over the `std::ptr` module.
The specific actions taken were:
* The `RawPtr` trait was renamed to `PtrExt`
* The `RawMutPtr` trait was renamed to `MutPtrExt`
* The module name `ptr` is now stable.
* These functions were all marked `#[stable]` with no modification:
* `null`
* `null_mut`
* `swap`
* `replace`
* `read`
* `write`
* `PtrExt::is_null`
* `PtrExt::offset`
* These functions remain unstable:
* `as_ref`, `as_mut` - the return value of an `Option` is not fully expressive
as null isn't the only bad value, and it's unclear
whether we want to commit to these functions at this
time. The reference/lifetime semantics as written are
also problematic in how they encourage arbitrary
lifetimes.
* `zero_memory` - This function is currently not used at all in the
distribution, and in general it plays a broader role in the
"working with unsafe pointers" story. This story is not yet
fully developed, so at this time the function remains
unstable for now.
* `read_and_zero` - This function remains unstable for largely the same
reasons as `zero_memory`.
* These functions are now all deprecated:
* `PtrExt::null` - call `ptr::null` or `ptr::null_mut` instead.
* `PtrExt::to_uint` - use an `as` expression instead.
* `PtrExt::is_not_null` - use `!p.is_null()` instead.
This commit is a second pass stabilization for the `std::comm` module,
performing the following actions:
* The entire `std::comm` module was moved under `std::sync::mpsc`. This movement
reflects that channels are just yet another synchronization primitive, and
they don't necessarily deserve a special place outside of the other
concurrency primitives that the standard library offers.
* The `send` and `recv` methods have all been removed.
* The `send_opt` and `recv_opt` methods have been renamed to `send` and `recv`.
This means that all send/receive operations return a `Result` now indicating
whether the operation was successful or not.
* The error type of `send` is now a `SendError` to implement a custom error
message and allow for `unwrap()`. The error type contains an `into_inner`
method to extract the value.
* The error type of `recv` is now `RecvError` for the same reasons as `send`.
* The `TryRecvError` and `TrySendError` types have had public reexports removed
of their variants and the variant names have been tweaked with enum
namespacing rules.
* The `Messages` iterator is renamed to `Iter`
This functionality is now all `#[stable]`:
* `Sender`
* `SyncSender`
* `Receiver`
* `std::sync::mpsc`
* `channel`
* `sync_channel`
* `Iter`
* `Sender::send`
* `Sender::clone`
* `SyncSender::send`
* `SyncSender::try_send`
* `SyncSender::clone`
* `Receiver::recv`
* `Receiver::try_recv`
* `Receiver::iter`
* `SendError`
* `RecvError`
* `TrySendError::{mod, Full, Disconnected}`
* `TryRecvError::{mod, Empty, Disconnected}`
* `SendError::into_inner`
* `TrySendError::into_inner`
This is a breaking change due to the modification of where this module is
located, as well as the changing of the semantics of `send` and `recv`. Most
programs just need to rename imports of `std::comm` to `std::sync::mpsc` and
add calls to `unwrap` after a send or a receive operation.
[breaking-change]
All of the current std::sync primitives have poisoning enable which means that
when a task fails inside of a write-access lock then all future attempts to
acquire the lock will fail. This strategy ensures that stale data whose
invariants are possibly not upheld are never viewed by other tasks to help
propagate unexpected panics (bugs in a program) among tasks.
Currently there is no way to test whether a mutex or rwlock is poisoned. One
method would be to duplicate all the methods with a sister foo_catch function,
for example. This pattern is, however, against our [error guidelines][errors].
As a result, this commit exposes the fact that a task has failed internally
through the return value of a `Result`.
[errors]: https://github.com/rust-lang/rfcs/blob/master/text/0236-error-conventions.md#do-not-provide-both-result-and-fail-variants
All methods now return a `LockResult<T>` or a `TryLockResult<T>` which
communicates whether the lock was poisoned or not. In a `LockResult`, both the
`Ok` and `Err` variants contains the `MutexGuard<T>` that is being returned in
order to allow access to the data if poisoning is not desired. This also means
that the lock is *always* held upon returning from `.lock()`.
A new type, `PoisonError`, was added with one method `into_guard` which can
consume the assertion that a lock is poisoned to gain access to the underlying
data.
This is a breaking change because the signatures of these methods have changed,
often incompatible ways. One major difference is that the `wait` methods on a
condition variable now consume the guard and return it in as a `LockResult` to
indicate whether the lock was poisoned while waiting. Most code can be updated
by calling `.unwrap()` on the return value of `.lock()`.
[breaking-change]
This patch marks `clone` stable, as well as the `Clone` trait, but
leaves `clone_from` unstable. The latter will be decided by the beta.
The patch also marks most manual implementations of `Clone` as stable,
except where the APIs are otherwise deprecated or where there is
uncertainty about providing `Clone`.
r? @alexcrichton
This patch marks `clone` stable, as well as the `Clone` trait, but
leaves `clone_from` unstable. The latter will be decided by the beta.
The patch also marks most manual implementations of `Clone` as stable,
except where the APIs are otherwise deprecated or where there is
uncertainty about providing `Clone`.
This commit is part of a series that introduces a `std::thread` API to
replace `std::task`.
In the new API, `spawn` returns a `JoinGuard`, which by default will
join the spawned thread when dropped. It can also be used to join
explicitly at any time, returning the thread's result. Alternatively,
the spawned thread can be explicitly detached (so no join takes place).
As part of this change, Rust processes now terminate when the main
thread exits, even if other detached threads are still running, moving
Rust closer to standard threading models. This new behavior may break code
that was relying on the previously implicit join-all.
In addition to the above, the new thread API also offers some built-in
support for building blocking abstractions in user space; see the module
doc for details.
Closes#18000
[breaking-change]
This commit performs a second pass stabilization of the `std::default` module.
The module was already marked `#[stable]`, and the inheritance of `#[stable]`
was removed since this attribute was applied. This commit adds the `#[stable]`
attribute to the trait definition and one method name, along with all
implementations found in the standard distribution.
Now that we have an overloaded comparison (`==`) operator, and that `Vec`/`String` deref to `[T]`/`str` on method calls, many `as_slice()`/`as_mut_slice()`/`to_string()` calls have become redundant. This patch removes them. These were the most common patterns:
- `assert_eq(test_output.as_slice(), "ground truth")` -> `assert_eq(test_output, "ground truth")`
- `assert_eq(test_output, "ground truth".to_string())` -> `assert_eq(test_output, "ground truth")`
- `vec.as_mut_slice().sort()` -> `vec.sort()`
- `vec.as_slice().slice(from, to)` -> `vec.slice(from_to)`
---
Note that e.g. `a_string.push_str(b_string.as_slice())` has been left untouched in this PR, since we first need to settle down whether we want to favor the `&*b_string` or the `b_string[]` notation.
This is rebased on top of #19167
cc @alexcrichton @aturon
In regards to:
https://github.com/rust-lang/rust/issues/19253#issuecomment-64836729
This commit:
* Changes the #deriving code so that it generates code that utilizes fewer
reexports (in particur Option::* and Result::*), which is necessary to
remove those reexports in the future
* Changes other areas of the codebase so that fewer reexports are utilized
These functions allow you to see how many weak and strong references
there are to an `Arc`, `Rc`, or an `rc::Weak`. Due to the design of
`Arc` it is not possible to get the number of weak references of an
arbitrary `arc::Weak`. Look in `arc.rs` for a more in-depth explanation.
On `arc::Arc` and `arc::Weak` these operations are wait-free and atomic.
https://github.com/rust-lang/rfcs/pull/221
The current terminology of "task failure" often causes problems when
writing or speaking about code. You often want to talk about the
possibility of an operation that returns a Result "failing", but cannot
because of the ambiguity with task failure. Instead, you have to speak
of "the failing case" or "when the operation does not succeed" or other
circumlocutions.
Likewise, we use a "Failure" header in rustdoc to describe when
operations may fail the task, but it would often be helpful to separate
out a section describing the "Err-producing" case.
We have been steadily moving away from task failure and toward Result as
an error-handling mechanism, so we should optimize our terminology
accordingly: Result-producing functions should be easy to describe.
To update your code, rename any call to `fail!` to `panic!` instead.
Assuming you have not created your own macro named `panic!`, this
will work on UNIX based systems:
grep -lZR 'fail!' . | xargs -0 -l sed -i -e 's/fail!/panic!/g'
You can of course also do this by hand.
[breaking-change]
