Add wasm32 support to inline asm
There is some contention around inline asm and wasm, and I really only made this to figure out the process of hacking on rustc, but I figured as long as the code existed, it was worth uploading.
cc `@Amanieu`
Support repr(simd) on ADTs containing a single array field
This is a squash and rebase of `@gnzlbg's` #63531
I've never actually written code in the compiler before so just fumbled my way around until it would build 😅
I imagine there'll be some work we need to do in `rustc_codegen_cranelift` too for this now, but might need some input from `@bjorn3` to know what that is.
cc `@rust-lang/project-portable-simd`
-----
This PR allows using `#[repr(simd)]` on ADTs containing a single array field:
```rust
#[repr(simd)] struct S0([f32; 4]);
#[repr(simd)] struct S1<const N: usize>([f32; N]);
#[repr(simd)] struct S2<T, const N: usize>([T; N]);
```
This should allow experimenting with portable packed SIMD abstractions on nightly that make use of const generics.
Upgrades the coverage map to Version 4
Changes the coverage map injected into binaries compiled with
`-Zinstrument-coverage` to LLVM Coverage Mapping Format, Version 4 (from
Version 3). Note, binaries compiled with this version will require LLVM
tools from at least LLVM Version 11.
r? ``@wesleywiser``
* `rustc` should now compile under LLVM 9 or 10
* Compiler generates an error if `-Z instrument-coverage` is specified
but LLVM version is less than 11
* Coverage tests that require `-Z instrument-coverage` and run codegen
should be skipped if LLVM version is less than 11
This is useful for embedded targets where small code size is desired.
For example, on my project (thumbv7em-none-eabi) this yields a 0.6% code size reduction.
Changes the coverage map injected into binaries compiled with
`-Zinstrument-coverage` to LLVM Coverage Mapping Format, Version 4 (from
Version 3). Note, binaries compiled with this version will require LLVM
tools from at least LLVM Version 11.
It is applied exactly when the return value has an indirect pass mode.
Except for InReg on x86 fastcall, arg attrs are now only used for
optimization purposes and thus are fine to ignore.
The `#[naked]` attribute disabled prologue / epilogue emission for the
function and it is responsibility of a developer to provide them. The
compiler is no position to inline such functions correctly.
Disable inlining of naked functions at LLVM and MIR level.
Fix setting inline hint based on `InstanceDef::requires_inline`
For instances where `InstanceDef::requires_inline` is true, an attempt
is made to set an inline hint though a call to the `inline` function.
The attempt is ineffective, since all attributes will be usually removed
by the second call.
Fix the issue by applying the attributes only once, with user provided
attributes having a priority when provided.
Closes#79108.
Updated the list of white-listed target features for x86
This PR both adds in-source documentation on what to look out for when adding a new (X86) feature set and [adds all that are detectable at run-time in Rust stable as of 1.27.0](https://github.com/rust-lang/stdarch/blob/master/crates/std_detect/src/detect/arch/x86.rs).
This should only enable the use of the corresponding LLVM intrinsics.
Actual intrinsics need to be added separately in rust-lang/stdarch.
It also re-orders the run-time-detect test statements to be more consistent
with the actual list of intrinsics whitelisted and removes underscores not present
in the actual names (which might be mistaken as being part of the name)
The reference for LLVM's feature names used is [this file](https://github.com/llvm/llvm-project/blob/master/llvm/include/llvm/Support/X86TargetParser.def).
This PR was motivated as the compiler end's part for allowing #67329 to be adressed over on rust-lang/stdarch
[self-profiling] Include the estimated size of each cgu in the profile
This is helpful when looking for CGUs where the size estimate isn't a
good indicator of compilation time.
I verified that moving the profiling timer call doesn't affect the
results.
Results:
<img width="297" alt="Screen Shot 2020-11-03 at 7 25 04 AM" src="https://user-images.githubusercontent.com/831192/97985503-5901d100-1da6-11eb-9f10-f3e399702952.png">
`measureme` doesn't have support for custom arg names yet so `arg0` is the CGU name and `arg1` is the estimated size.
For instances where `InstanceDef::requires_inline` is true, an attempt
is made to set an inline hint though a call to the `inline` function.
The attempt is ineffective, since all attributes will be usually removed
by the second call.
Fix the issue by applying the attributes only once, with user provided
attributes having a priority when provided.
Allow making `RUSTC_BOOTSTRAP` conditional on the crate name
Motivation: This came up in the [Zulip stream](https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/Require.20users.20to.20confirm.20they.20know.20RUSTC_.E2.80.A6.20compiler-team.23350/near/208403962) for https://github.com/rust-lang/compiler-team/issues/350.
See also https://github.com/rust-lang/cargo/pull/6608#issuecomment-458546258; this implements https://github.com/rust-lang/cargo/issues/6627.
The goal is for this to eventually allow prohibiting setting `RUSTC_BOOTSTRAP` in build.rs (https://github.com/rust-lang/cargo/issues/7088).
## User-facing changes
- `RUSTC_BOOTSTRAP=1` still works; there is no current plan to remove this.
- Things like `RUSTC_BOOTSTRAP=0` no longer activate nightly features. In practice this shouldn't be a big deal, since `RUSTC_BOOTSTRAP` is the opposite of stable and everyone uses `RUSTC_BOOTSTRAP=1` anyway.
- `RUSTC_BOOTSTRAP=x` will enable nightly features only for crate `x`.
- `RUSTC_BOOTSTRAP=x,y` will enable nightly features only for crates `x` and `y`.
## Implementation changes
The main change is that `UnstableOptions::from_environment` now requires
an (optional) crate name. If the crate name is unknown (`None`), then the new feature is not available and you still have to use `RUSTC_BOOTSTRAP=1`. In practice this means the feature is only available for `--crate-name`, not for `#![crate_name]`; I'm interested in supporting the second but I'm not sure how.
Other major changes:
- Added `Session::is_nightly_build()`, which uses the `crate_name` of
the session
- Added `nightly_options::match_is_nightly_build`, a convenience method
for looking up `--crate-name` from CLI arguments.
`Session::is_nightly_build()`should be preferred where possible, since
it will take into account `#![crate_name]` (I think).
- Added `unstable_features` to `rustdoc::RenderOptions`
I'm not sure whether this counts as T-compiler or T-lang; _technically_ RUSTC_BOOTSTRAP is an implementation detail, but it's been used so much it seems like this counts as a language change too.
r? `@joshtriplett`
cc `@Mark-Simulacrum` `@hsivonen`
rustc_target: Mark UEFI targets as `is_like_windows`/`is_like_msvc`
And document what `is_like_windows` and `is_like_msvc` actually mean in more detail.
Addresses FIXMEs left from https://github.com/rust-lang/rust/pull/71030.
r? `@nagisa`
Add asm register information for SPIR-V
As discussed in [zulip](https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp/topic/Defining.20asm!.20for.20new.20architecture), we at [rust-gpu](https://github.com/EmbarkStudios/rust-gpu) would like to support `asm!` for our SPIR-V backend. However, we cannot do so purely without frontend support: [this match](d4ea0b3e46/compiler/rustc_target/src/asm/mod.rs (L185)) fails and so `asm!` is not supported ([error reported here](d4ea0b3e46/compiler/rustc_ast_lowering/src/expr.rs (L1095))). To resolve this, we need to stub out register information for SPIR-V to support getting the `asm!` content all the way to [`AsmBuilderMethods::codegen_inline_asm`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_codegen_ssa/traits/trait.AsmBuilderMethods.html#tymethod.codegen_inline_asm), at which point the rust-gpu backend can do all the parsing and codegen that is needed.
This is a pretty weird PR - adding support for a backend that isn't in-tree feels pretty gross to me, but I don't see an easy way around this. ``@Amanieu`` said I should submit it anyway, so, here we are! Let me know if this needs to go through a more formal process (MCP?) and what I should do to help this along.
I based this off the [wasm asm PR](https://github.com/rust-lang/rust/pull/78684), which unfortunately this PR conflicts with that one quite a bit, sorry for any merge conflict pain :(
---
Some open questions:
- What do we call the register class? Some context, SPIR-V is an SSA-based IR, there are "instructions" that create IDs (referred to as `<id>` in the spec), which can be referenced by other instructions. So, `reg` isn't exactly accurate, they're SSA IDs, not re-assignable registers.
- What happens when a SPIR-V register gets to the LLVM backend? Right now it's a `bug!`, but should that be a `sess.fatal()`? I'm not sure if it's even possible to reach that point, maybe there's a check that prevents the `spirv` target from even reaching that codepath.
This commit grepped for LLVM_VERSION_GE, LLVM_VERSION_LT, get_major_version and
min-llvm-version and statically evaluated every expression possible
(and sensible) assuming that the LLVM version is >=9 now
The discussion seems to have resolved that this lint is a bit "noisy" in
that applying it in all places would result in a reduction in
readability.
A few of the trivial functions (like `Path::new`) are fine to leave
outside of closures.
The general rule seems to be that anything that is obviously an
allocation (`Box`, `Vec`, `vec![]`) should be in a closure, even if it
is a 0-sized allocation.
with an eye on merging `TargetOptions` into `Target`.
`TargetOptions` as a separate structure is mostly an implementation detail of `Target` construction, all its fields logically belong to `Target` and available from `Target` through `Deref` impls.
This PR allows using `#[repr(simd)]` on ADTs containing a
single array field:
```rust
#[repr(simd)] struct S0([f32; 4]);
#[repr(simd)] struct S1<const N: usize>([f32; N]);
#[repr(simd)] struct S2<T, const N: usize>([T; N]);
```
This should allow experimenting with portable packed SIMD
abstractions on nightly that make use of const generics.
The main change is that `UnstableOptions::from_environment` now requires
an (optional) crate name. If the crate name is unknown (`None`), then the new feature is not available and you still have to use `RUSTC_BOOTSTRAP=1`. In practice this means the feature is only available for `--crate-name`, not for `#![crate_name]`; I'm interested in supporting the second but I'm not sure how.
Other major changes:
- Added `Session::is_nightly_build()`, which uses the `crate_name` of
the session
- Added `nightly_options::match_is_nightly_build`, a convenience method
for looking up `--crate-name` from CLI arguments.
`Session::is_nightly_build()`should be preferred where possible, since
it will take into account `#![crate_name]` (I think).
- Added `unstable_features` to `rustdoc::RenderOptions`
There is a user-facing change here: things like `RUSTC_BOOTSTRAP=0` no
longer active nightly features. In practice this shouldn't be a big
deal, since `RUSTC_BOOTSTRAP` is the opposite of stable and everyone
uses `RUSTC_BOOTSTRAP=1` anyway.
- Add tests
Check against `Cheat`, not whether nightly features are allowed.
Nightly features are always allowed on the nightly channel.
- Only call `is_nightly_build()` once within a function
- Use booleans consistently for rustc_incremental
Sessions can't be passed through threads, so `read_file` couldn't take a
session. To be consistent, also take a boolean in `write_file_header`.
Implementing the Graph traits for the BasicCoverageBlock
graph.
optimized replacement of counters with expressions plus new BCB graphviz
* Avoid adding coverage to unreachable blocks.
* Special case for Goto at the end of the body. Make it non-reportable.
Improved debugging and formatting options (from env)
Don't automatically add counters to BCBs without CoverageSpans. They may
still get counters but only if there are dependencies from
other BCBs that have spans, I think.
Make CodeRegions optional for Counters too. It is
possible to inject counters (`llvm.instrprof.increment` intrinsic calls
without corresponding code regions in the coverage map. An expression
can still uses these counter values.
Refactored instrument_coverage.rs -> instrument_coverage/mod.rs, and
then broke up the mod into multiple files.
Compiling with coverage, with the expression optimization, works on
the json5format crate and its dependencies.
Refactored debug features from mod.rs to debug.rs
Add support for SHA256 source file hashing
Adds support for `-Z src-hash-algorithm sha256`, which became available in LLVM 11.
Using an older version of LLVM will cause an error `invalid checksum kind` if the hash algorithm is set to sha256.
r? `@eddyb`
cc #70401 `@est31`
This is helpful when looking for CGUs where the size estimate isn't a
good indicator of compilation time.
I verified that moving the profiling timer call doesn't affect the
results.
foreign_modules query hash table lookups
When compiling a large monolithic crate we're seeing huge times in the `foreign_modules` query due to repeated iteration over foreign modules (in order to find a module by its id). This implements hash table lookups so that which massively reduces time spent in that query in this particular case. We'll need to see if the overhead of creating the hash table has a negative impact on performance in more normal compilation scenarios.
I'm working with `@wesleywiser` on this.
