Enable ASAN/LSAN/TSAN for *-apple-ios-macabi
The -macabi targets are iOS running on MacOS, and they use the runtime libraries for MacOS, thus they have the same sanitizers available as the *-apple-darwin targets.
This is based on the work of aacf3213b1.
Closes#113935.
coverage: Fix an unstable-sort inconsistency in coverage spans
This code was calling `sort_unstable_by`, but failed to impose a total order on the initial spans. That resulted in unpredictable handling of closure spans, producing inconsistencies in the coverage maps and in user-visible coverage reports.
This PR fixes the problem by always sorting closure spans before otherwise-identical non-closure spans, and also switches to a stable sort in case the ordering is still not total.
---
In addition to the fix itself, this PR also contains a cleanup to the comparison function that I was working on when I discovered the bug.
Make `TyKind::Adt`'s `Debug` impl be more pretty
Currently `{:?}` on `Ty` for a `TyKind::Adt` would print as `Adt(Foo, [])`. This PR changes it to be `Foo` when there are no generics or `Foo<T>`/`Foo<T, U>` when there _are_ generics. Example from debug log:
`├─0ms DEBUG rustc_hir_analysis::astconv return=Bar<T/#0, U/#1>`
I should have done this in my initial PR for a prettier TyKind: Debug impl but I thought I would need to be accessing generics_of to figure out where in the "path" the generics would have to go??? but no, adts literally only have a single place the generics can go (on the end). Feel a bit silly about this :)
r? `@oli-obk`
Avoid blessing cargo deps's source code in ui tests
Before this PR, the source code of dependencies was included in UI test error messages whenever possible. Unfortunately, "whenever possible" means in some cases the source code wouldn't be injected, resulting in a test failure.
One such case is when `$CARGO_HOME` is remapped to something that is not present on disk [^1]. As the remapped path doesn't exist on disk, the source code wouldn't be showed in `tests/ui/issues/issue-21763.rs`:
```diff
= note: required for `hashbrown::raw::RawTable<(Rc<()>, Rc<()>)>` to implement `Send`
note: required because it appears within the type `HashMap<Rc<()>, Rc<()>, RandomState>`
--> $HASHBROWN_SRC_LOCATION
- |
-LL | pub struct HashMap<K, V, S = DefaultHashBuilder, A: Allocator + Clone = Global> {
- | ^^^^^^^
note: required because it appears within the type `HashMap<Rc<()>, Rc<()>>`
--> $SRC_DIR/std/src/collections/hash/map.rs:LL:COL
note: required by a bound in `foo`
```
This PR fixes the problem by always hiding dependencies source code in the error messages generated during UI tests. This is implemented with a new internal flag, `-Z ignore-directory-in-diagnostics-source-blocks=$path`, which compiletest passes during UI tests. Once this is merged, remapping the Cargo home will be supported.
This PR is best reviewed commit-by-commit.
[^1]: After being puzzled for a bit, I discovered why this never impacted `rust-lang/rust`: we don't remap `$CARGO_HOME` 😅. Instead, we set `$CARGO_HOME` to `/cargo` in CI, which sort-of-but-not-really achieves the same effect.
move required_consts check to general post-mono-check function
This factors some code that is common between the interpreter and the codegen backends into shared helper functions. Also as a side-effect the interpreter now uses the same `eval` functions as everyone else to get the evaluated MIR constants.
Also this is in preparation for another post-mono check that will be needed for (the current hackfix for) https://github.com/rust-lang/rust/issues/115709: ensuring that all locals are dynamically sized.
I didn't expect this to change diagnostics, but it's just cycle errors that change.
r? `@oli-obk`
simplify inject_impl_of_structural_trait
There's a comment at `inject_impl_of_structural_trait` saying we cannot use `TraitDef`, but that comment is outdated -- we *can* use `TraitDef` nowadays since it has the `skip_path_as_bound` flag. (The flag needed some fixing, though.)
The -macabi targets are iOS running on MacOS, and they use the runtime
libraries for MacOS, thus they have the same sanitizers available as the
*-apple-darwin targets.
This code was calling `sort_unstable_by`, but failed to impose a total order on
the initial spans. That resulted in unpredictable handling of closure spans,
producing inconsistencies in the coverage maps and in user-visible coverage
reports.
This patch fixes the problem by always sorting closure spans before
otherwise-identical non-closure spans, and also switches to a stable sort in
case the ordering is still not total.
nop_lift macros: ensure that we are using the right interner
Right now someone could put down the wrong list name when using these macros, and everything would still build. Nothing does a type-check to ensure that the `$set` contains element of type `Self::Lifted`. Let's fix that.
For lists this is fairly easy; for the other interners we need to unwrap some newtypes which makes this more complicated.
It's easier to pass it in to the one method that needs it
(`highlighting_region_vid`) than to store it in the type. This means
`RegionHighlightMode` can impl `Default`.
repr(transparent): it's fine if the one non-1-ZST field is a ZST
This code currently gets rejected:
```rust
#[repr(transparent)]
struct MyType([u16; 0])
```
That clearly seems like a bug to me: `repr(transparent)` [got defined ](https://github.com/rust-lang/rust/issues/77841#issuecomment-716575747) as having any number of 1-ZST fields plus optionally one more field; `MyType` clearly satisfies that definition.
This PR changes the `repr(transparent)` logic to actually match that definition.
Rollup of 6 pull requests
Successful merges:
- #114965 (Remove Drop impl of mpsc Receiver and (Sync)Sender)
- #115434 (make `Debug` impl for `ascii::Char` match that of `char`)
- #115477 (Stabilize the `Saturating` type)
- #115611 (add diagnostic for raw identifiers in format string)
- #115654 (improve PassMode docs)
- #115862 (Migrate `compiler/rustc_hir_typeck/src/callee.rs` to translatable diagnostics)
r? `@ghost`
`@rustbot` modify labels: rollup
Make `.rmeta` file in `dep-info` have correct name (`lib` prefix)
Since `filename_for_metadata()` and
`OutputFilenames::path(OutputType::Metadata)` had different logic for the name of the metadata file, the `.d` file contained a file name different from the actual name used. Share the logic to fix the out-of-sync name.
Without this fix, the `.d` file contained
dash-separated_something-extra.rmeta: dash-separated.rs
instead of
libdash_separated_something-extra.rmeta: dash-separated.rs
which is the name of the file that is actually written by the compiler.
Worth noting: It took me several iterations to get all tests to pass, so I am relatively confident that this PR does not break anything.
Closes#68839
add diagnostic for raw identifiers in format string
Format strings don't support raw identifiers (e.g. `format!("{r#type}")`), but they do support keywords in the format string directly (e.g. `format!("{type}")`). This PR improves the error output when attempting to use a raw identifier in a format string and adds a machine-applicable suggestion to remove the `r#`.
fixes https://github.com/rust-lang/rust/issues/115466
`#[diagnostic::on_unimplemented]` without filters
This commit adds support for a `#[diagnostic::on_unimplemented]` attribute with the following options:
* `message` to customize the primary error message
* `note` to add a customized note message to an error message
* `label` to customize the label part of the error message
The relevant behavior is specified in [RFC-3366](https://rust-lang.github.io/rfcs/3366-diagnostic-attribute-namespace.html)
coverage: Simplify internal representation of debug types
Most of these debug helper types store each of their fields as `Option<T>`, and then set them to `Some` when the relevant debug checks are enabled. This makes the struct fields awkward to read and results in some contortions when accessing the field values.
This PR addresses those problems by changing each of the helper types to have a single `state: Option<FooState>` field. Each individual method can then obtain the state up-front (or return early if it is absent), allowing the rest of the code to just access the state's contents directly.
---
There are some more improvements I'd like to make to the debug code, but for this PR I'm focusing on a straightforward mechanical change that should be fairly easy to review.
(I did thrown in a few trivial changes to imports and docs, along with one switch from `FxHashMap` to `FxHashSet`.)
---
Most of the changed lines are just indentation churn, so ignoring whitespace is recommended.
Accept additional user-defined syntax classes in fenced code blocks
Part of #79483.
This is a re-opening of https://github.com/rust-lang/rust/pull/79454 after a big update/cleanup. I also converted the syntax to pandoc as suggested by `@notriddle:` the idea is to be as compatible as possible with the existing instead of having our own syntax.
## Motivation
From the original issue: https://github.com/rust-lang/rust/issues/78917
> The technique used by `inline-c-rs` can be ported to other languages. It's just super fun to see C code inside Rust documentation that is also tested by `cargo doc`. I'm sure this technique can be used by other languages in the future.
Having custom CSS classes for syntax highlighting will allow tools like `highlight.js` to be used in order to provide highlighting for languages other than Rust while not increasing technical burden on rustdoc.
## What is the feature about?
In short, this PR changes two things, both related to codeblocks in doc comments in Rust documentation:
* Allow to disable generation of `language-*` CSS classes with the `custom` attribute.
* Add your own CSS classes to a code block so that you can use other tools to highlight them.
#### The `custom` attribute
Let's start with the new `custom` attribute: it will disable the generation of the `language-*` CSS class on the generated HTML code block. For example:
```rust
/// ```custom,c
/// int main(void) {
/// return 0;
/// }
/// ```
```
The generated HTML code block will not have `class="language-c"` because the `custom` attribute has been set. The `custom` attribute becomes especially useful with the other thing added by this feature: adding your own CSS classes.
#### Adding your own CSS classes
The second part of this feature is to allow users to add CSS classes themselves so that they can then add a JS library which will do it (like `highlight.js` or `prism.js`), allowing to support highlighting for other languages than Rust without increasing burden on rustdoc. To disable the automatic `language-*` CSS class generation, you need to use the `custom` attribute as well.
This allow users to write the following:
```rust
/// Some code block with `{class=language-c}` as the language string.
///
/// ```custom,{class=language-c}
/// int main(void) {
/// return 0;
/// }
/// ```
fn main() {}
```
This will notably produce the following HTML:
```html
<pre class="language-c">
int main(void) {
return 0;
}</pre>
```
Instead of:
```html
<pre class="rust rust-example-rendered">
<span class="ident">int</span> <span class="ident">main</span>(<span class="ident">void</span>) {
<span class="kw">return</span> <span class="number">0</span>;
}
</pre>
```
To be noted, we could have written `{.language-c}` to achieve the same result. `.` and `class=` have the same effect.
One last syntax point: content between parens (`(like this)`) is now considered as comment and is not taken into account at all.
In addition to this, I added an `unknown` field into `LangString` (the parsed code block "attribute") because of cases like this:
```rust
/// ```custom,class:language-c
/// main;
/// ```
pub fn foo() {}
```
Without this `unknown` field, it would generate in the DOM: `<pre class="language-class:language-c language-c">`, which is quite bad. So instead, it now stores all unknown tags into the `unknown` field and use the first one as "language". So in this case, since there is no unknown tag, it'll simply generate `<pre class="language-c">`. I added tests to cover this.
Finally, I added a parser for the codeblock attributes to make it much easier to maintain. It'll be pretty easy to extend.
As to why this syntax for adding attributes was picked: it's [Pandoc's syntax](https://pandoc.org/MANUAL.html#extension-fenced_code_attributes). Even if it seems clunkier in some cases, it's extensible, and most third-party Markdown renderers are smart enough to ignore Pandoc's brace-delimited attributes (from [this comment](https://github.com/rust-lang/rust/pull/110800#issuecomment-1522044456)).
## Raised concerns
#### It's not obvious when the `language-*` attribute generation will be added or not.
It is added by default. If you want to disable it, you will need to use the `custom` attribute.
#### Why not using HTML in markdown directly then?
Code examples in most languages are likely to contain `<`, `>`, `&` and `"` characters. These characters [require escaping](https://developer.mozilla.org/en-US/docs/Web/HTML/Element/pre) when written inside the `<pre>` element. Using the \`\`\` code blocks allows rustdoc to take care of escaping, which means doc authors can paste code samples directly without manually converting them to HTML.
cc `@poliorcetics`
r? `@notriddle`
Rollup of 2 pull requests
Successful merges:
- #115607 (clarify that unsafe code must not rely on our safe traits)
- #115866 (make interpreter and TyAndLayout type Debug impl independent of Ty debug impl)
Failed merges:
- #115873 (Make `TyKind::Adt`'s `Debug` impl be more pretty)
- #115884 (make ty::Const debug printing less verbose)
r? `@ghost`
`@rustbot` modify labels: rollup
