Change #[suggestion_*] attributes to use style="..."
As discussed [on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20tool_only_span_suggestion), this changes `#[(multipart_)suggestion_{short,verbose,hidden}(...)]` attributes to plain `#[(multipart_)suggestion(...)]` attributes with a `style = "{short,verbose,hidden}"` parameter.
It also adds a new style, `tool-only`, that corresponds to `tool_only_span_suggestion`/`tool_only_multipart_suggestion` and causes the suggestion to not be shown in human-readable output at all.
Best reviewed commit-by-commit, there's a bit of noise in there.
cc #100717 `@compiler-errors`
r? `@davidtwco`
Allow `impl Fn() -> impl Trait` in return position
_This was originally proposed as part of #93082 which was [closed](https://github.com/rust-lang/rust/pull/93082#issuecomment-1027225715) due to allowing `impl Fn() -> impl Trait` in argument position._
This allows writing the following function signatures:
```rust
fn f0() -> impl Fn() -> impl Trait;
fn f3() -> &'static dyn Fn() -> impl Trait;
```
These signatures were already allowed for common traits and associated types, there is no reason why `Fn*` traits should be special in this regard.
`impl Trait` in both `f0` and `f3` means "new existential type", just like with `-> impl Iterator<Item = impl Trait>` and such.
Arrow in `impl Fn() ->` is right-associative and binds from right to left, it's tested by [this test](a819fecb8d/src/test/ui/impl-trait/impl_fn_associativity.rs).
There even is a test that `f0` compiles:
2f004d2d40/src/test/ui/impl-trait/nested_impl_trait.rs (L25-L28)
But it was changed in [PR 48084 (lines)](https://github.com/rust-lang/rust/pull/48084/files#diff-ccecca938872d65ffe8cd1c3ef1956e309fac83bcda547d8b16b89257e53a437R37) to test the opposite, probably unintentionally given [PR 48084 (lines)](https://github.com/rust-lang/rust/pull/48084/files#diff-5a02f1ed43debed1fd24f7aad72490064f795b9420f15d847bac822aa4621a1cR476-R477).
r? `@nikomatsakis`
----
This limitation is especially annoying with async code, since it forces one to write this:
```rust
trait AsyncFn3<A, B, C>: Fn(A, B, C) -> <Self as AsyncFn3<A, B, C>>::Future {
type Future: Future<Output = Self::Out>;
type Out;
}
impl<A, B, C, Fut, F> AsyncFn3<A, B, C> for F
where
F: Fn(A, B, C) -> Fut,
Fut: Future,
{
type Future = Fut;
type Out = Fut::Output;
}
fn async_closure() -> impl AsyncFn3<i32, i32, i32, Out = u32> {
|a, b, c| async move { (a + b + c) as u32 }
}
```
Instead of:
```rust
fn async_closure() -> impl Fn(i32, i32, i32) -> impl Future<Output = u32> {
|a, b, c| async move { (a + b + c) as u32 }
}
```
spastorino noticed some silly expressions like `item_id.def_id.def_id`.
This commit renames several `def_id: OwnerId` fields as `owner_id`, so
those expressions become `item_id.owner_id.def_id`.
`item_id.owner_id.local_def_id` would be even clearer, but the use of
`def_id` for values of type `LocalDefId` is *very* widespread, so I left
that alone.
This allows writing the following function signatures:
```rust
fn f0() -> impl Fn() -> impl Trait;
fn f3() -> &'static dyn Fn() -> impl Trait;
```
These signatures were already allowed for common traits and associated
types, there is no reason why `Fn*` traits should be special in this
regard.
translation: doc comments with derives, subdiagnostic-less enum variants, more derive use
- Adds support for `doc` attributes in the diagnostic derives so that documentation comments don't result in the derive failing.
- Adds support for enum variants in the subdiagnostic derive to not actually correspond to an addition to a diagnostic.
- Made use of the derive in more places in the `rustc_ast_lowering`, `rustc_ast_passes`, `rustc_lint`, `rustc_session`, `rustc_infer` - taking advantage of recent additions like eager subdiagnostics, multispan suggestions, etc.
cc #100717
Drop temporaries created in a condition, even if it's a let chain
Fixes#100513.
During the lowering from AST to HIR we wrap expressions acting as conditions in a `DropTemps` expression so that any temporaries created in the condition are dropped after the condition is executed. Effectively this means we transform
```rust
if Some(1).is_some() { .. }
```
into (roughly)
```rust
if { let _t = Some(1).is_some(); _t } { .. }
```
so that if we create any temporaries, they're lifted into the new scope surrounding the condition, so for example something along the lines of
```rust
if { let temp = Some(1); let _t = temp.is_some(); _t }.
```
Before this PR, if the condition contained any let expressions we would not introduce that new scope, instead leaving the condition alone. This meant that in a let-chain like
```rust
if get_drop("first").is_some() && let None = get_drop("last") {
println!("second");
} else { .. }
```
the temporary created for `get_drop("first")` would be lifted into the _surrounding block_, which caused it to be dropped after the execution of the entire `if` expression.
After this PR, we wrap everything but the `let` expression in terminating scopes. The upside to this solution is that it's minimally invasive, but the downside is that in the worst case, an expression with `let` exprs interspersed like
```rust
if get_drop("first").is_some()
&& let Some(_a) = get_drop("fifth")
&& get_drop("second").is_some()
&& let Some(_b) = get_drop("fourth") { .. }
```
gets _multiple_ new scopes, roughly
```rust
if { let _t = get_drop("first").is_some(); _t }
&& let Some(_a) = get_drop("fifth")
&& { let _t = get_drop("second").is_some(); _t }
&& let Some(_b) = get_drop("fourth") { .. }
```
so instead of all of the temporaries being dropped at the end of the entire condition, they will be dropped right after they're evaluated (before the subsequent `let` expr). So while I'd say the drop behavior around let-chains is _less_ surprising after this PR, it still might not exactly match what people might expect.
For tests, I've just extended the drop order tests added in #100526. I'm not sure if that's the best way to go about it, though, so suggestions are welcome.
Correctly handle path stability for 'use tree' items
PR #95956 started checking the stability of path segments.
However, this was not applied to 'use tree' items
(e.g. 'use some::path::{ItemOne, ItemTwo}') due to the way
that we desugar these items in HIR lowering.
This PR modifies 'use tree' lowering to preserve resolution
information, which is needed by stability checking.
translation: eager translation
Part of #100717. See [Zulip thread](https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20lists!/near/295010720) for additional context.
- **Store diagnostic arguments in a `HashMap`**: Eager translation will enable subdiagnostics to be translated multiple times with different arguments - this requires the ability to replace the value of one argument with a new value, which is better suited to a `HashMap` than the previous storage, a `Vec`.
- **Add `AddToDiagnostic::add_to_diagnostic_with`**: `AddToDiagnostic::add_to_diagnostic_with` is similar to the previous `AddToDiagnostic::add_to_diagnostic` but takes a function that can be used by the caller to modify diagnostic messages originating from the subdiagnostic (such as performing translation eagerly). `add_to_diagnostic` now just calls `add_to_diagnostic_with` with an empty closure.
- **Add `DiagnosticMessage::Eager`**: Add variant of `DiagnosticMessage` for eagerly translated messages
(messages in the target language which don't need translated by the emitter during emission). Also adds `eager_subdiagnostic` function which is intended to be invoked by the diagnostic derive for subdiagnostic fields which are marked as needing eager translation.
- **Support `#[subdiagnostic(eager)]`**: Add support for `eager` argument to the `subdiagnostic` attribute which generates a call to `eager_subdiagnostic`.
- **Finish migrating `rustc_query_system`**: Using eager translation, migrate the remaining repeated cycle stack diagnostic.
- **Split formatting initialization and use in diagnostic derives**: Diagnostic derives have previously had to take special care when ordering the generated code so that fields were not used after a move.
This is unlikely for most fields because a field is either annotated with a subdiagnostic attribute and is thus likely a `Span` and copiable, or is a argument, in which case it is only used once by `set_arg`
anyway.
However, format strings for code in suggestions can result in fields being used after being moved if not ordered carefully. As a result, the derive currently puts `set_arg` calls last (just before emission), such as:
let diag = { /* create diagnostic */ };
diag.span_suggestion_with_style(
span,
fluent::crate::slug,
format!("{}", __binding_0),
Applicability::Unknown,
SuggestionStyle::ShowAlways
);
/* + other subdiagnostic additions */
diag.set_arg("foo", __binding_0);
/* + other `set_arg` calls */
diag.emit();
For eager translation, this doesn't work, as the message being translated eagerly can assume that all arguments are available - so arguments _must_ be set first.
Format strings for suggestion code are now separated into two parts - an initialization line that performs the formatting into a variable, and a usage in the subdiagnostic addition.
By separating these parts, the initialization can happen before arguments are set, preserving the desired order so that code compiles, while still enabling arguments to be set before subdiagnostics are added.
let diag = { /* create diagnostic */ };
let __code_0 = format!("{}", __binding_0);
/* + other formatting */
diag.set_arg("foo", __binding_0);
/* + other `set_arg` calls */
diag.span_suggestion_with_style(
span,
fluent::crate::slug,
__code_0,
Applicability::Unknown,
SuggestionStyle::ShowAlways
);
/* + other subdiagnostic additions */
diag.emit();
- **Remove field ordering logic in diagnostic derive:** Following the approach taken in earlier commits to separate formatting initialization from use in the subdiagnostic derive, simplify the diagnostic derive by removing the field-ordering logic that previously solved this problem.
r? ```@compiler-errors```
`AddToDiagnostic::add_to_diagnostic_with` is similar to the previous
`AddToDiagnostic::add_to_diagnostic` but takes a function that can be
used by the caller to modify diagnostic messages originating from the
subdiagnostic (such as performing translation eagerly).
`add_to_diagnostic` now just calls `add_to_diagnostic_with` with an
empty closure.
Signed-off-by: David Wood <david.wood@huawei.com>
rename `ImplItemKind::TyAlias` to `ImplItemKind::Type`
The naming of this variant seems inconsistent given that this is not really a "type alias", and the associated type variant for `TraitItemKind` is just called `Type`.
fix a ui test
use `into`
fix clippy ui test
fix a run-make-fulldeps test
implement `IntoQueryParam<DefId>` for `OwnerId`
use `OwnerId` for more queries
change the type of `ParentOwnerIterator::Item` to `(OwnerId, OwnerNode)`
Rollup of 8 pull requests
Successful merges:
- #100734 (Split out async_fn_in_trait into a separate feature)
- #101664 (Note if mismatched types have a similar name)
- #101815 (Migrated the rustc_passes annotation without effect diagnostic infrastructure)
- #102042 (Distribute rust-docs-json via rustup.)
- #102066 (rustdoc: remove unnecessary `max-width` on headers)
- #102095 (Deduplicate two functions that would soon have been three)
- #102104 (Set 'exec-env:RUST_BACKTRACE=0' in const-eval-select tests)
- #102112 (Allow full relro on powerpc64-unknown-linux-gnu)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
PR #101224 added support for async fn in trait desuraging behind the
return_position_impl_trait_in_trait feature.
Split this out so that it's behind its own feature gate, since async fn
in trait doesn't need to follow the same stabilization schedule.
FIX - ambiguous Diagnostic link in docs
UPDATE - rename diagnostic_items to IntoDiagnostic and AddToDiagnostic
[Gardening] FIX - formatting via `x fmt`
FIX - rebase conflicts. NOTE: Confirm wheather or not we want to handle TargetDataLayoutErrorsWrapper this way
DELETE - unneeded allow attributes in Handler method
FIX - broken test
FIX - Rebase conflict
UPDATE - rename residual _SessionDiagnostic and fix LintDiag link
On later stages, the feature is already stable.
Result of running:
rg -l "feature.let_else" compiler/ src/librustdoc/ library/ | xargs sed -s -i "s#\\[feature.let_else#\\[cfg_attr\\(bootstrap, feature\\(let_else\\)#"
make `mk_attr_id` part of `ParseSess`
Updates #48685
The current `mk_attr_id` uses the `AtomicU32` type, which is not very efficient and adds a lot of lock contention in a parallel environment.
This PR refers to the task list in #48685, uses `mk_attr_id` as a method of the `AttrIdGenerator` struct, and adds a new field `attr_id_generator` to `ParseSess`.
`AttrIdGenerator` uses the `WorkerLocal`, which has two advantages: 1. `Cell` is more efficient than `AtomicU32`, and does not increase any lock contention. 2. We put the index of the work thread in the first few bits of the generated `AttrId`, so that the `AttrId` generated in different threads can be easily guaranteed to be unique.
cc `@cjgillot`
