Gate parser recovery via debugflag
Gate parser recovery via debugflag
Put in `-Z continue_parse_after_error`
This works by adding a method, `fn abort_if_no_parse_recovery`, to the
diagnostic handler in `syntax::errors`, and calling it after each
error is emitted in the parser.
(We might consider adding a debugflag to do such aborts in other
places where we are currently attempting recovery, such as resolve,
but I think the parser is the really important case to handle in the
face of #31994 and the parser bugs of varying degrees that were
injected by parse error recovery.)
r? @nikomatsakis
parser recovery (so that expected errors match up)
I'm opting into parser recovery in all these cases out of expediency,
not because the error messages you get with recovery enabled are
actually all that usable in all cases listed.
Prevent bumping the parser past the EOF.
Makes `Parser::bump` after EOF into an ICE, forcing callers to avoid repeated EOF bumps.
This ICE is intended to break infinite loops where EOF wasn't stopping the loop.
For example, the handling of EOF in `parse_trait_items`' recovery loop fixes#32446.
But even without this specific fix, the ICE is triggered, which helps diagnosis and UX.
This is a `[breaking-change]` for plugins authors who eagerly eat multiple EOFs.
See https://github.com/docopt/docopt.rs/pull/171 for such an example and the necessary fix.
melt the ICE when lowering an impossible range
Emit a fatal error instead of panicking when HIR lowering encounters a range with no `end` point.
This involved adding a method to wire up `LoweringContext::span_fatal`.
Fixes#32245 (cc @nodakai).
r? @nrc
Restrict constants in patterns
This implements [RFC 1445](https://github.com/rust-lang/rfcs/blob/master/text/1445-restrict-constants-in-patterns.md). The primary change is to limit the types of constants used in patterns to those that *derive* `Eq` (note that implementing `Eq` is not sufficient). This has two main effects:
1. Floating point constants are linted, and will eventually be disallowed. This is because floating point constants do not implement `Eq` but only `PartialEq`. This check replaces the existing special case code that aimed to detect the use of `NaN`.
2. Structs and enums must derive `Eq` to be usable within a match.
This is a [breaking-change]: if you encounter a problem, you are most likely using a constant in an expression where the type of the constant is some struct that does not currently implement
`Eq`. Something like the following:
```rust
struct SomeType { ... }
const SOME_CONST: SomeType = ...;
match foo {
SOME_CONST => ...
}
```
The easiest and most future compatible fix is to annotate the type in question with `#[derive(Eq)]` (note that merely *implementing* `Eq` is not enough, it must be *derived*):
```rust
struct SomeType { ... }
const SOME_CONST: SomeType = ...;
match foo {
SOME_CONST => ...
}
```
Another good option is to rewrite the match arm to use an `if` condition (this is also particularly good for floating point types, which implement `PartialEq` but not `Eq`):
```rust
match foo {
c if c == SOME_CONST => ...
}
```
Finally, a third alternative is to tag the type with `#[structural_match]`; but this is not recommended, as the attribute is never expected to be stabilized. Please see RFC #1445 for more details.
cc https://github.com/rust-lang/rust/issues/31434
r? @pnkfelix
resolve: Minimize hacks in name resolution of primitive types
When resolving the first unqualified segment in a path with `n` segments and `n - 1` associated item segments, e.g. (`a` or `a::assoc` or `a::assoc::assoc` etc) try to resolve `a` without considering primitive types first. If the "normal" lookup fails or results in a module, then try to resolve `a` as a primitive type as a fallback.
This way backward compatibility is respected, but the restriction from E0317 can be lifted, i.e. primitive names mostly can be shadowed like any other names.
Furthermore, if names of primitive types are [put into prelude](https://github.com/petrochenkov/rust/tree/prim2) (now it's possible to do), then most of names will be resolved in conventional way and amount of code relying on this fallback will be greatly reduced. Although, it's not entirely convenient to put them into prelude right now due to temporary conflicts like `use prelude::v1::*; use usize;` in libcore/libstd, I'd better wait for proper glob shadowing before doing it.
I wish the `no_prelude` attribute were unstable as intended :(
cc @jseyfried @arielb1
r? @eddyb
Disallow methods from traits that are not in scope
This PR only allows a trait method to be used if the trait is in scope (fixes#31379).
This is a [breaking-change]. For example, the following would break:
```rust
mod foo {
pub trait T { fn f(&self) {} }
impl T for () {}
}
mod bar { pub use foo::T; }
fn main() {
pub use bar::*;
struct T; // This shadows the trait `T`,
().f() // making this an error.
}
```
r? @nikomatsakis
Alter E0412 help message wording
The initial wording does not make sense due to an extra 'to'.
There are two potential candidates we can change this to:
- 'you can import it into scope'
- 'to import it into scope'
In keeping the changes minimal, we choose the first, as this is more in line with the grammar of the extended candidates help message.
The older code would sometimes swallow errors or fail to produce a
suggestion. The newer code does not. However, just printing everything
would produce a bunch of new and kind of annoying errors, so continue
to swallow `T: 'a` errors so long as there are other things to show.
Refactor call & function handling in trans, enable MIR bootstrap.
Non-Rust and Rust ABIs were combined into a common codepath, which means:
* The ugly `__rust_abi` "clown shoes" shim for C->Rust FFI is gone, fixes#10116.
* Methods, *including virtual ones* support non-Rust ABIs, closes#30235.
* Non-Rust ABIs also pass fat pointers in two arguments; the result should be identical.
* Zero-sized types are never passed as arguments; again, behavior shouldn't change.
Additionally, MIR support for calling intrinsics (through old trans) was implemented.
Alongside assorted fixes, it enabled MIR to launch 🚀 and do a *complete* bootstrap.
To try it yourself, `./configure --enable-orbit` *or* `make RUSTFLAGS="-Z orbit"`.
Original issue: https://github.com/rust-lang/rust/issues/21195
Relevant PR: https://github.com/rust-lang/rust/pull/30778
Prior to this commit, if a compiletest testcase included the text
"HELP:" or "NOTE:" (note the colons), then it would indicate to the
compiletest suite that we should verify "help" and "note" expected
messages.
This commit updates this check to also check "HELP" and "NOTE" (not the
absense of colons) so that we always verify "help" and "note" expected
messages.
Resolve: improve diagnostics for duplicate definitions and imports
This PR improves and regularizes the diagnostics for duplicate definitions and imports.
After this PR, the second of two duplicate definitions/imports will have the following form:
> a(n) [value|type|module|trait|extern crate] named \`*name*\` has already been [defined|imported] in this [module|block|trait|enum]
with a note referencing this first of the two duplicate definitions/imports:
> previous [definition|import] of \`*name*\` here
The error indices remain unchanged.
r? @eddyb
projection sensitive to "mode" (most importantly, trans vs middle).
This commit introduces several pieces of iteration infrastructure in the
specialization graph data structure, as well as various helpers for
finding the definition of a given item, given its kind and name.
In addition, associated type projection is now *mode-sensitive*, with
three possible modes:
- **Topmost**. This means that projection is only possible if there is a
non-`default` definition of the associated type directly on the
selected impl. This mode is a bit of a hack: it's used during early
coherence checking before we have built the specialization
graph (and therefore before we can walk up the specialization
parents to find other definitions). Eventually, this should be
replaced with a less "staged" construction of the specialization
graph.
- **AnyFinal**. Projection succeeds for any non-`default` associated
type definition, even if it is defined by a parent impl. Used
throughout typechecking.
- **Any**. Projection always succeeds. Used by trans.
The lasting distinction here is between `AnyFinal` and `Any` -- we wish
to treat `default` associated types opaquely for typechecking purposes.
In addition to the above, the commit includes a few other minor review fixes.
typestrong const integers
~~It would be great if someone could run crater on this PR, as this has a high danger of breaking valid code~~ Crater ran. Good to go.
----
So this PR does a few things:
1. ~~const eval array values when const evaluating an array expression~~
2. ~~const eval repeat value when const evaluating a repeat expression~~
3. ~~const eval all struct and tuple fields when evaluating a struct/tuple expression~~
4. remove the `ConstVal::Int` and `ConstVal::Uint` variants and replace them with a single enum (`ConstInt`) which has variants for all integral types
* `usize`/`isize` are also enums with variants for 32 and 64 bit. At creation and various usage steps there are assertions in place checking if the target bitwidth matches with the chosen enum variant
5. enum discriminants (`ty::Disr`) are now `ConstInt`
6. trans has its own `Disr` type now (newtype around `u64`)
This obviously can't be done without breaking changes (the ones that are noticable in stable)
We could probably write lints that find those situations and error on it for a cycle or two. But then again, those situations are rare and really bugs imo anyway:
```rust
let v10 = 10 as i8;
let v4 = 4 as isize;
assert_eq!(v10 << v4 as usize, 160 as i8);
```
stops compiling because 160 is not a valid i8
```rust
struct S<T, S> {
a: T,
b: u8,
c: S
}
let s = S { a: 0xff_ff_ff_ffu32, b: 1, c: 0xaa_aa_aa_aa as i32 };
```
stops compiling because `0xaa_aa_aa_aa` is not a valid i32
----
cc @eddyb @pnkfelix
related: https://github.com/rust-lang/rfcs/issues/1071
Do not report errors from regionck if other errors were already reported
Do not report errors from regionck if other errors were already reported during the lifetime of this inferencer. Fixes#30580.
r? @arielb1
Fix name resolution in lexical scopes
Currently, `resolve_item_in_lexical_scope` does not check the "ribs" (type parameters and local variables). This can allow items that should be shadowed by type parameters to be named.
For example,
```rust
struct T { i: i32 }
fn f<T>() {
let t = T { i: 0 }; // This use of `T` resolves to the struct, not the type parameter
}
mod Foo {
pub fn f() {}
}
fn g<Foo>() {
Foo::f(); // This use of `Foo` resolves to the module, not the type parameter
}
```
This PR changes `resolve_item_in_lexical_scope` so that it fails when the item is shadowed by a rib (fixes#32120).
This is a [breaking-change], but it looks unlikely to cause breakage in practice.
r? @nikomatsakis
std: Fix tracking issues and clean deprecated APIs
This PR fixes up a number of discrepancies found with tracking issues (some closed, some needed new ones, etc), and also cleans out all pre-1.8 deprecated APIs. The big beast here was dealing with `std::dynamic_lib`, and via many applications of a large hammer it's now out of the standard library.
Removes all unstable and deprecated APIs prior to the 1.8 release. All APIs that
are deprecated in the 1.8 release are sticking around for the rest of this
cycle.
Some notable changes are:
* The `dynamic_lib` module was moved into `rustc_back` as the compiler still
relies on a few bits and pieces.
* The `DebugTuple` formatter now special-cases an empty struct name with only
one field to append a trailing comma.
Forbid items with the same name from appearing in overlapping inherent impl blocks
For example, the following is now correctly illegal:
```rust
struct Foo;
impl Foo {
fn id() {}
}
impl Foo {
fn id() {}
}
```
"Overlapping" here is determined the same way it is for traits (and in fact shares the same code path): roughly, there must be some way of substituting any generic types to unify the impls, such that none of the `where` clauses are provably unsatisfiable under such a unification.
Along the way, this PR also introduces an `ImplHeader` abstraction (the first commit) that makes it easier to work with impls abstractly (without caring whether they are trait or inherent impl blocks); see the first commit.
Closes#22889
r? @nikomatsakis
Forbid glob-importing from a type alias
This PR forbids glob-importing from a type alias or trait (fixes#30560):
```rust
type Alias = ();
use Alias::*; // This is currently allowed but shouldn't be
```
This is a [breaking-change]. Since the disallowed glob imports don't actually import anything, any breakage can be fixed by removing the offending glob import.
r? @alexcrichton
Prefer 'associated function' over 'static method' in msg.
TRPL seems to refer to 'static functions' as 'associated functions'.
This terminology should be used consistently.
Fix a regression in import resolution
This fixes#32089 (caused by #31726) by deducing that name resolution has failed (as opposed to being determinate) in more cases.
r? @nikomatsakis
Distinguish fn item types to allow reification from nothing to fn pointers.
The first commit is a rebase of #26284, except for files that have moved since.
This is a [breaking-change], due to:
* each FFI function has a distinct type, like all other functions currently do
* all generic parameters on functions are recorded in their item types, e.g.:
`size_of::<u8>` & `size_of::<i8>`'s types differ despite their identical signature.
* function items are zero-sized, which will stop transmutes from working on them
The first two cases are handled in most cases with the new coerce-unify logic,
which will combine incompatible function item types into function pointers,
at the outer-most level of if-else chains, match arms and array literals.
The last case is specially handled during type-checking such that transmutes
from a function item type to a pointer or integer type will continue to work for
another release cycle, but are being linted against. To get rid of warnings and
ensure your code will continue to compile, cast to a pointer before transmuting.
Fix incorrect trait privacy error
This PR fixes#21670 by using the crate metadata instead of `ExternalExports` to determine if an external item is public.
r? @nikomatsakis
There's a lot of stuff wrong with the representation of these types:
TyFnDef doesn't actually uniquely identify a function, TyFnPtr is used to
represent method calls, TyFnDef in the sub-expression of a cast isn't
correctly reified, and probably some other stuff I haven't discovered yet.
Splitting them seems like the right first step, though.
Make errors for unnecessary visibility qualifiers consistent
This PR refactors away `syntax::parse::parser::ParsePub` so that unnecessary visibility qualifiers on variant fields are reported not by the parser but by `privacy::SanePrivacyVisitor` (thanks to @petrochenkov's drive-by improvements in #31919).
r? @nikomatsakis
mk: Distribute fewer TARGET_CRATES
Right now everything in TARGET_CRATES is built by default for all non-fulldeps
tests and is distributed by default for all target standard library packages.
Currenly this includes a number of unstable crates which are rarely used such as
`graphviz` and `rbml`>
This commit trims down the set of `TARGET_CRATES`, moves a number of tests to
`*-fulldeps` as a result, and trims down the dependencies of libtest so we can
distribute fewer crates in the `rust-std` packages.
Add error file for E0152
It completes #31818.
However it is not complete yet:
* test will need to be updated
* the file name displayed is a bit too unclear.
I'm not sure yet what's the "correct" file name to display. If anyone has an idea on this, it'd be very appreciated.
r? @brson
implement the `?` operator
The `?` postfix operator is sugar equivalent to the try! macro, but is more amenable to chaining:
`File::open("foo")?.metadata()?.is_dir()`.
`?` is accepted on any *expression* that can return a `Result`, e.g. `x()?`, `y!()?`, `{z}?`,
`(w)?`, etc. And binds more tightly than unary operators, e.g. `!x?` is parsed as `!(x?)`.
cc #31436
---
cc @aturon @eddyb
Right now everything in TARGET_CRATES is built by default for all non-fulldeps
tests and is distributed by default for all target standard library packages.
Currenly this includes a number of unstable crates which are rarely used such as
`graphviz` and `rbml`>
This commit trims down the set of `TARGET_CRATES`, moves a number of tests to
`*-fulldeps` as a result, and trims down the dependencies of libtest so we can
distribute fewer crates in the `rust-std` packages.
The `?` postfix operator is sugar equivalent to the try! macro, but is more amenable to chaining:
`File::open("foo")?.metadata()?.is_dir()`.
`?` is accepted on any *expression* that can return a `Result`, e.g. `x()?`, `y!()?`, `{z}?`,
`(w)?`, etc. And binds more tightly than unary operators, e.g. `!x?` is parsed as `!(x?)`.
cc #31436
Do not trigger unused_assignments for overloaded AssignOps
If `v` were a type with some kind of indirection, so that `v += 1` would
have an effect even if `v` were not used anymore, the unused_assignments lint
would mark a false positive.
This exempts overloaded (non-primitive) assign ops from being treated as
assignments (they are method calls).
The previous compile-fail tests that ensure x += 1 can trigger for
primitive types continue to pass. Added a representative test for the
"view" indirection.
Fixes#31895
This PR implements [RFC 1192](https://github.com/rust-lang/rfcs/blob/master/text/1192-inclusive-ranges.md), which is triple-dot syntax for inclusive range expressions. The new stuff is behind two feature gates (one for the syntax and one for the std::ops types). This replaces the deprecated functionality in std::iter. Along the way I simplified the desugaring for all ranges.
This is my first contribution to rust which changes more than one character outside of a test or comment, so please review carefully! Some of the individual commit messages have more of my notes. Also thanks for putting up with my dumb questions in #rust-internals.
- For implementing `std::ops::RangeInclusive`, I took @Stebalien's suggestion from https://github.com/rust-lang/rfcs/pull/1192#issuecomment-137864421. It seemed to me to make the implementation easier and increase type safety. If that stands, the RFC should be amended to avoid confusion.
- I also kind of like @glaebhoerl's [idea](https://github.com/rust-lang/rfcs/pull/1254#issuecomment-147815299), which is unified inclusive/exclusive range syntax something like `x>..=y`. We can experiment with this while everything is behind a feature gate.
- There are a couple of FIXMEs left (see the last commit). I didn't know what to do about `RangeArgument` and I haven't added `Index` impls yet. Those should be discussed/finished before merging.
cc @Gankro since you [complained](https://www.reddit.com/r/rust/comments/3xkfro/what_happened_to_inclusive_ranges/cy5j0yq)
cc #27777#30877rust-lang/rust#1192rust-lang/rfcs#1254
relevant to #28237 (tracking issue)
This PR allows using methods from traits that are visible but are defined in an inaccessible module (fixes#18241). For example,
```rust
mod foo {
pub use foo::bar::Tr;
mod bar { // This module is inaccessible from `g`
pub trait Tr { fn f(&self) {} }
}
}
fn g<T: foo::Tr>(t: T) {
t.f(); // Currently, this is a privacy error even though `foo::Tr` is visible
}
```
After this PR, it will continue to be a privacy error to use a method from a trait that is not visible. This can happen when a public trait inherits from a private trait (in violation of the `public_in_private` lint) -- see @petrochenkov's example in #28504.
r? @nikomatsakis
Now that 767d85061a is upstream, the relevant deadlocking issue which prompted our downgrade has been resolved. As a result, there's no known issue to *not* upgrade! This also re-enables jemalloc for the pc-windows-gnu target as known issues with that have also been fixed.
Closes#31030
Right now there's just a smattering of `// ignore-foo` platforms which is ever
expanding as new ones are added. Instead switch to only running these tests on
Linux/OSX and then use a guaranteed-to-work but not-as-well-tested alternative
on other platforms.
This PR changes the search paths for macro-expanded non-inline modules so that they match ordinary non-inline modules (fixes#31624). This is a [breaking-change].
Right now, the search paths for a macro-expanded non-inline module are computed as if the module were declared in the top level of the file in which the macro was defined.
For example, consider `./foo/mod.rs`:
```rust
mod inconsequential { // moving the macro outside this module wouldn't change anything
macro_rules! mod_decl {
($i:ident) => { mod $i; }
}
}
```
and `./lib.rs`:
```rust
mod foo;
mod bar {
mod_decl!(baz);
//^ Now, rustc expects `./foo/baz.rs` (or `./foo/baz/mod.rs`)
//| After this PR, rustc will expect `./bar/baz.rs` (or `./bar/baz/mod.rs`)
}
```
r? @alexcrichton
This PR extends compiletest to support **test revisions** and with a preliminary **incremental testing harness**. run-pass, compile-fail, and run-fail tests may be tagged with
```
// revisions: a b c d
```
This will cause the test to be re-run four times with `--cfg {a,b,c,d}` in turn. This means you can write very closely related things using `cfg`. You can also configure the headers/expected-errors by writing `//[foo] header: value` or `//[foo]~ ERROR bar`, where `foo` is the name of your revision. See the changes to `coherence-cow.rs` as a proof of concept.
The main point of this work is to support the incremental testing harness. This PR contains an initial, unused version. The code that uses it will land later. The incremental testing harness compiles each revision in turn, and requires that the revisions have particular names (e.g., `rpass2`, `cfail3`), which tell it whether a particular revision is expected to compile or not.
Two questions:
- Is there compiletest documentation anywhere I can update?
- Should I hold off on landing the incremental testing harness until I have the code to exercise it? (That will come in a separate PR, still fixing a few details)
r? @alexcrichton
cc @rust-lang/compiler <-- new testing capabilities
This PR privacy checks paths as they are resolved instead of in `librustc_privacy` (fixes#12334 and fixes#31779). This removes the need for the `LastPrivate` system introduced in PR #9735, the limitations of which cause #31779.
This PR also reports privacy violations in paths to intra- and inter-crate items the same way -- it always reports the first inaccessible segment of the path.
Since it fixes#31779, this is a [breaking-change]. For example, the following code would break:
```rust
mod foo {
pub use foo::bar::S;
mod bar { // `bar` should be private to `foo`
pub struct S;
}
}
impl foo::S {
fn f() {}
}
fn main() {
foo::bar::S::f(); // This is now a privacy error
}
```
r? @alexcrichton
These types were already `!Sync`, but this improves error messages when they are used in contexts that require `Sync`, aligning them with conventions used with `Rc`, among others.
r? @alexcrichton
These types were already `!Sync`, but this improves error messages when
they are used in contexts that require `Sync`, aligning them with
conventions used with `Rc`, among others.
This commit is the result of the FCPs ending for the 1.8 release cycle for both
the libs and the lang suteams. The full list of changes are:
Stabilized
* `braced_empty_structs`
* `augmented_assignments`
* `str::encode_utf16` - renamed from `utf16_units`
* `str::EncodeUtf16` - renamed from `Utf16Units`
* `Ref::map`
* `RefMut::map`
* `ptr::drop_in_place`
* `time::Instant`
* `time::SystemTime`
* `{Instant,SystemTime}::now`
* `{Instant,SystemTime}::duration_since` - renamed from `duration_from_earlier`
* `{Instant,SystemTime}::elapsed`
* Various `Add`/`Sub` impls for `Time` and `SystemTime`
* `SystemTimeError`
* `SystemTimeError::duration`
* Various impls for `SystemTimeError`
* `UNIX_EPOCH`
* `ops::{Add,Sub,Mul,Div,Rem,BitAnd,BitOr,BitXor,Shl,Shr}Assign`
Deprecated
* Scoped TLS (the `scoped_thread_local!` macro)
* `Ref::filter_map`
* `RefMut::filter_map`
* `RwLockReadGuard::map`
* `RwLockWriteGuard::map`
* `Condvar::wait_timeout_with`
Closes#27714Closes#27715Closes#27746Closes#27748Closes#27908Closes#29866
Since the desugaring removed special handling for ranges, the error
message changed and so I had to adjust `range-1`.
Turns out there was a bug where borrowck was too restrictive in some
rare cases of constructing ranges from literals. The `range-2` test
enshrined this bug -- now it's adjusted to test a case that's actually
wrong.
Mostly copy the tests from half-open ranges, adding some more for
DoubleEndedIterator and ExactSizeIterator.
Also thoroughly (I think) test that the feature gates are working.
suggest: Put the `use` in suggested code inside the quotes
Change import a trait suggestion from:
help: candidate #1: use `std::io::Write`
to
help: candidate #1: `use std::io::Write`
so that the code can be copied directly.
Fixes#31864
This fixes a bug (#31845) introduced in #31105 in which lexical scopes contain items from all anonymous module ancestors, even if the path to the anonymous module includes a normal module:
```rust
fn f() {
fn g() {}
mod foo {
fn h() {
g(); // This erroneously resolves on nightly
}
}
}
```
This is a [breaking-change] on nightly but not on stable or beta.
r? @nikomatsakis
You can now group tests into directories like `run-pass/borrowck` or `compile-fail/borrowck`. By default, all `.rs` files within any directory are considered tests: to ignore some directory, create a placeholder file called `compiletest-ignore-dir` (I had to do this for several existing directories).
r? @alexcrichton
cc @brson
Change import a trait suggestion from:
help: candidate #1: use `std::io::Write`
to
help: candidate #1: `use std::io::Write`
so that the code can be copied directly.
This warning was introduced on Nov 28, 2015 and got into 1.6 stable, it was later requalified from a hardwired warning to a warn-by-default lint.
If this patch is landed soon enough, then `match_of_unit_variant_via_paren_dotdot` will get into 1.8 stable as a deny-by-default lint.
My intention is to turn it into a hard error after March 3, 2016, then it will hit stable at 1.9.
r? @nikomatsakis
cc @pnkfelix
Now that #31461 is merged, a failing resolution can never become indeterminate or succeed, so we no longer have to keep trying to resolve failing import directives.
r? @nrc
This commit adds functionality that allows the name resolution pass
to search for entities (traits/types/enums/structs) by name, in
order to show recommendations along with the errors.
For now, only E0405 and E0412 have suggestions attached, as per the
request in bug #21221, but it's likely other errors can also benefit
from the ability to generate suggestions.
This commit adds functionality that allows the name resolution pass
to search for entities (traits/types/enums/structs) by name, in
order to show recommendations along with the errors.
For now, only E0405 and E0412 have suggestions attached, as per the
request in bug #21221, but it's likely other errors can also benefit
from the ability to generate suggestions.
This PR disallows non-inline modules without path annotations that are either in a block or in an inline module whose containing file is not a directory owner (fixes#29765).
This is a [breaking-change].
r? @nikomatsakis
This PR fixes two unrelated diagnostics bugs in resolve.
First, it reports privacy errors for an import only after the import resolution is determined, fixing #31402.
Second, it expands the per-module map from block ids to anonymous modules so that it also maps module declarations ids to modules, and it uses this map to in `with_scope` to fix#31644.
r? @nrc
This PR adds to `NameBinding` so it can more fully represent bindings from imports as well from items, refactors away `Target`, generalizes `ImportResolution` to a simpler type `NameResolution`, and uses a single `NameResolution`-valued map in place the existing maps `children` and `import_resolutions` (of `NameBinding`s and `ImportResolution`s, respectively), simplifying duplicate checking and name resolution.
It also unifies the `resolve_name_in_module` in `lib.rs` with its namesake in `resolve_imports.rs`, clarifying and improving the core logic (fixes#31403 and fixes#31404) while maintaining clear future-comparability with shadowable globs (i.e., never reporting that a resolution is a `Success` or is `Failing` unless this would also be knowable with shadowable globs).
Since it fixes#31403, this is technically a [breaking-change], but it is exceedingly unlikely to cause breakage in practice. The following is an example of code that would break:
```rust
mod foo {
pub mod bar {} // This defines bar in the type namespace
pub use alpha::bar; // This defines bar in the value namespace
// This should define baz in both namespaces, but it only defines baz in the type namespace.
pub use self::bar as baz;
pub fn baz() {} // This should collide with baz, but now it does not.
}
pub fn f() {}
mod alpha {
pub use self::f as bar; // Changing this to `pub fn bar() {}` causes the collision right now.
pub use super::*;
}
```
r? @nrc
A spec like `#[cfg(foo(bar))]` is not allowed as an attribute. This
makes the same spec be rejected by the compiler if passed in as a
`--cfg` argument.
Fixes#31495
A spec like `#[cfg(foo(bar))]` is not allowed as an attribute. This
makes the same spec be rejected by the compiler if passed in as a
`--cfg` argument.
Fixes#31495
Refactor away resolve_name_in_module in resolve_imports.rs
Rewrite and improve the core name resolution procedure in NameResolution::result and Module::resolve_name
Refactor the duplicate checking code into NameResolution::try_define
Issue #31109 uncovered two semi-related problems:
* A panic in `str::parse::<f64>`
* A panic in `rustc::middle::const_eval::lit_to_const` where the result of float parsing was unwrapped.
This series of commits fixes both issues and also drive-by-fixes some things I noticed while tracking down the parsing panic.
