Sort tests at compile time, not at startup
Recently, another Miri user was trying to run `cargo miri test` on the crate `iced-x86` with `--features=code_asm,mvex`. This configuration has a startup time of ~18 minutes. That's ~18 minutes before any tests even start to run. The fact that this crate has over 26,000 tests and Miri is slow makes a lot of code which is otherwise a bit sloppy but fine into a huge runtime issue.
Sorting the tests when the test harness is created instead of at startup time knocks just under 4 minutes out of those ~18 minutes. I have ways to remove most of the rest of the startup time, but this change requires coordinating changes of both the compiler and libtest, so I'm sending it separately.
(except for doctests, because there is no compile-time harness)
Remove redundant lifetime bound from `impl Borrow for Cow`
The lifetime bound `B::Owned: 'a` is redundant and doesn't make a difference,
because `Cow<'a, B>` comes with an implicit `B: 'a`, and associated types
will outlive lifetimes outlived by the `Self` type (and all the trait's
generic parameters, of which there are none in this case), so the implicit `B: 'a`
implies `B::Owned: 'a` anyway.
The explicit lifetime bound here does however [end up in documentation](https://doc.rust-lang.org/std/borrow/enum.Cow.html#impl-Borrow%3CB%3E),
and that's confusing in my opinion, so let's remove it ^^
_(Documentation right now, compare to `AsRef`, too:)_
Shorten the `lookup_line` code slightly
The `match` looks like it's exactly the same as `checked_sub(1)`, so we might as well see if perf says we can just do that to save a couple lines.
Use ptr::metadata in <[T]>::len implementation
This avoids duplication of ptr::metadata code.
I believe this is acceptable as the previous approach essentially duplicated `ptr::metadata` because back then `rustc_allow_const_fn_unstable` annotation did not exist.
I would like somebody to ping `@rust-lang/wg-const-eval` as the documentation says:
> Always ping `@rust-lang/wg-const-eval` if you are adding more rustc_allow_const_fn_unstable attributes to any const fn.
Rollup of 11 pull requests
Successful merges:
- #100462 (Clarify `array::from_fn` documentation)
- #101644 (Document surprising and dangerous fs::Permissions behaviour on Unix)
- #103005 (kmc-solid: Handle errors returned by `SOLID_FS_ReadDir`)
- #103140 (Add diagnostic for calling a function with the same name with unresolved Macro)
- #103254 (rustdoc: do not filter out cross-crate `Self: Sized` bounds)
- #103347 (bootstrap: also create rustc-src component in sysroot)
- #103402 (Fix wrapped valid-range handling in ty_find_init_error)
- #103414 (Pretty print lifetimes captured by RPIT)
- #103424 (rustdoc: remove no-op CSS `.code-header { border-bottom: none }`)
- #103434 (Use functions for jump-to-def-background rustdoc GUI test)
- #103447 (`MaybeUninit`: use `assume_init_drop()` in the partially initialized array example)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
`MaybeUninit`: use `assume_init_drop()` in the partially initialized array example
The `assume_init_drop()` method does the same thing as the pointer conversion, and makes the example more straightforward.
rustdoc: remove no-op CSS `.code-header { border-bottom: none }`
The code headers are always h3 or h4, which don't have border-bottom by default anyway.
Pretty print lifetimes captured by RPIT
This specifically makes the output in #103409 change from:
```diff
error: `impl` item signature doesn't match `trait` item signature
--> $DIR/signature-mismatch.rs:15:5
|
LL | fn async_fn(&self, buff: &[u8]) -> impl Future<Output = Vec<u8>>;
| ----------------------------------------------------------------- expected `fn(&'1 Struct, &'2 [u8]) -> impl Future<Output = Vec<u8>>`
...
LL | fn async_fn<'a>(&self, buff: &'a [u8]) -> impl Future<Output = Vec<u8>> + 'a {
- | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ found `fn(&'1 Struct, &'2 [u8]) -> impl Future<Output = Vec<u8>>`
+ | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ found `fn(&'1 Struct, &'2 [u8]) -> impl Future<Output = Vec<u8>> + '2`
|
= note: expected `fn(&'1 Struct, &'2 [u8]) -> impl Future<Output = Vec<u8>>`
- found `fn(&'1 Struct, &'2 [u8]) -> impl Future<Output = Vec<u8>>`
+ found `fn(&'1 Struct, &'2 [u8]) -> impl Future<Output = Vec<u8>> + '2`
= help: the lifetime requirements from the `impl` do not correspond to the requirements in the `trait`
= help: verify the lifetime relationships in the `trait` and `impl` between the `self` argument, the other inputs and its output
error: aborting due to previous error
```
Along with the UI tests in this PR, which I think are all improvements!
r? `@oli-obk` though feel free to re-roll
Fix wrapped valid-range handling in ty_find_init_error
Rust's niche handling allows for wrapping valid ranges with end < start;
for instance, a valid range with start=43 and end=41 means a niche of
42. Most places in the compiler handle this correctly, but
`ty_find_init_error` assumed that `lo > 0` means the type cannot contain a
zero.
Fix it to handle wrapping ranges.
rustdoc: do not filter out cross-crate `Self: Sized` bounds
All type parameters **except `Self`** are implicitly `Sized` ([via](https://doc.rust-lang.org/nightly/std/marker/trait.Sized.html)). Previously, we disregarded the exception of `Self` and omitted cross-crate `Sized` bounds of *any* type parameter *including* `Self` when rendering.
From now on, we *do* render cross-crate `Self: Sized` bounds.
Most notably, in `std` we now finally properly render the `Sized` bound of the `Clone` trait as well as the `Self: Sized` bound on `Iterator::map`.
Fixes#24183.
``@rustbot`` label T-rustdoc A-cross-crate-reexports
r? rustdoc
kmc-solid: Handle errors returned by `SOLID_FS_ReadDir`
Fixes the issue where the `std::fs::ReadDir` implementaton of the [`*-kmc-solid_*`](https://doc.rust-lang.org/nightly/rustc/platform-support/kmc-solid.html) Tier 3 targets silently suppressed errors returned by the underlying `SOLID_FS_ReadDir` system function. The new implementation correctly handles all cases:
- `SOLID_ERR_NOTFOUND` indicates the end of directory stream.
- `SOLID_ERR_OK` + non-empty `d_name` indicates success.
- Some old filesystem drivers may return `SOLID_ERR_OK` + empty `d_name` to indicate the end of directory stream.
- Any other negative values (per ITRON convention) represent an error.
Document surprising and dangerous fs::Permissions behaviour on Unix
This documents the very surprising behaviour that `set_readonly(false)` will make a file *world writable* on Unix. I would go so far as to say that this function should be deprecated on Unix, or maybe even entirely. But documenting the bad behaviour is a good first step.
Fixes#74895
Clarify `array::from_fn` documentation
I've seen quite a few of people on social media confused of where the length of array is coming from in the newly stabilized `array::from_fn` example.
This PR tries to clarify the documentation on this.
Upgrade dist-mips*-linux to ubuntu:22.04 + crosstool-ng
These have no change in compatibility, still Linux 4.4 and glibc 2.23.
The main motivation for upgrading is that LLVM 16 will require at least GCC 7.1. Using crosstool-ng lets us choose our own toolchain versions, and then the Ubuntu version doesn't matter so much, just for the host compilation while we cross-compile.
Eliminate 280-byte memset from ReadDir iterator
This guy:
1536ab1b38/library/std/src/sys/unix/fs.rs (L589)
It turns out `libc::dirent64` is quite big—https://docs.rs/libc/0.2.135/libc/struct.dirent64.html. In #103135 this memset accounted for 0.9% of the runtime of iterating a big directory.
Almost none of the big zeroed value is ever used. We memcpy a tiny prefix (19 bytes) into it, and then read just 9 bytes (`d_ino` and `d_type`) back out. We can read exactly those 9 bytes we need directly from the original entry_ptr instead.
## History
This code got added in #93459 and tweaked in #94272 and #94750.
Prior to #93459, there was no memset but a full 280 bytes were being copied from the entry_ptr.
<table><tr><td>copy 280 bytes</td></tr></table>
This was not legal because not all of those bytes might be initialized, or even allocated, depending on the length of the directory entry's name, leading to a segfault. That PR fixed the segfault by creating a new zeroed dirent64 and copying just the guaranteed initialized prefix into it.
<table><tr><td>memset 280 bytes</td><td>copy 19 bytes</td></tr></table>
However this was still buggy because it used `addr_of!((*entry_ptr).d_name)`, which is considered UB by Miri in the case that the full extent of entry_ptr is not in bounds of the same allocation. (Arguably this shouldn't be a requirement, but here we are.)
The UB got fixed by #94272 by replacing `addr_of` with some pointer manipulation based on `offset_from`, but still fundamentally the same operation.
<table><tr><td>memset 280 bytes</td><td>copy 19 bytes</td></tr></table>
Then #94750 noticed that only 9 of those 19 bytes were even being used, so we could pick out only those 9 to put in the ReadDir value.
<table><tr><td>memset 280 bytes</td><td>copy 19 bytes</td><td>copy 9 bytes</td></tr></table>
After my PR we just grab the 9 needed bytes directly from entry_ptr.
<table><tr><td>copy 9 bytes</td></tr></table>
The resulting code is more complex but I believe still worthwhile to land for the following reason. This is an extremely straightforward thing to accomplish in C and clearly libc assumes that; literally just `entry_ptr->d_name`. The extra work in comparison to accomplish it in Rust is not an example of any actual safety being provided by Rust. I believe it's useful to have uncovered that and think about what could be done in the standard library or language to support this obvious operation better.
## References
- https://man7.org/linux/man-pages/man3/readdir.3.html
Enable LTO for rustc_driver.so
Alternative to https://github.com/rust-lang/rust/pull/97154
This enables LTO'ing dylibs behind a feature flag and uses this feature for compiling rustc_driver.so.
