Improve allowness of the unexpected_cfgs lint
This pull-request improve the allowness (`#[allow(...)]`) of the `unexpected_cfgs` lint.
Before this PR only crate level `#![allow(unexpected_cfgs)]` worked, now with this PR it also work when put around `cfg!` or if it is in a upper level. Making it work ~for the attributes `cfg`, `cfg_attr`, ...~ for the same level is awkward as the current code is design to give "Some parent node that is close to this macro call" (cf. https://doc.rust-lang.org/nightly/nightly-rustc/rustc_expand/base/struct.ExpansionData.html) meaning that allow on the same line as an attribute won't work. I'm note even sure if this would be possible.
Found while working on https://github.com/rust-lang/rust/pull/94298.
r? ````````@petrochenkov````````
Use the first codegen backend in the config.toml as default
It is currently hard coded to llvm if enabled and cranelift otherwise.
This made some sense when cranelift was the only alternative codegen
backend. Since the introduction of the gcc backend this doesn't make
much sense anymore. Before this PR bootstrapping rustc using a backend
other than llvm or cranelift required changing the source of
rustc_interface. With this PR it becomes a matter of putting the right
backend as first enabled backend in config.toml.
cc ```@antoyo```
It is currently hard coded to llvm if enabled and cranelift otherwise.
This made some sense when cranelift was the only alternative codegen
backend. Since the introduction of the gcc backend this doesn't make
much sense anymore. Before this PR bootstrapping rustc using a backend
other than llvm or cranelift required changing the source of
rustc_interface. With this PR it becomes a matter of putting the right
backend as first enabled backend in config.toml.
No branch protection metadata unless enabled
Even if we emit metadata disabling branch protection, this metadata may
conflict with other modules (e.g. during LTO) that have different branch
protection metadata set.
This is an unstable flag and feature, so ideally the flag not being
specified should act as if the feature wasn't implemented in the first
place.
Additionally this PR also ensures we emit an error if
`-Zbranch-protection` is set on targets other than the supported
aarch64. For now the error is being output from codegen, but ideally it
should be moved to earlier in the pipeline before stabilization.
Use undef for (some) partially-uninit constants
There needs to be some limit to avoid perf regressions on large arrays
with undef in each element (see comment in the code).
Fixes: #84565
Original PR: #83698
Depends on LLVM 14: #93577
rustc_errors: let `DiagnosticBuilder::emit` return a "guarantee of emission".
That is, `DiagnosticBuilder` is now generic over the return type of `.emit()`, so we'll now have:
* `DiagnosticBuilder<ErrorReported>` for error (incl. fatal/bug) diagnostics
* can only be created via a `const L: Level`-generic constructor, that limits allowed variants via a `where` clause, so not even `rustc_errors` can accidentally bypass this limitation
* asserts `diagnostic.is_error()` on emission, just in case the construction restriction was bypassed (e.g. by replacing the whole `Diagnostic` inside `DiagnosticBuilder`)
* `.emit()` returns `ErrorReported`, as a "proof" token that `.emit()` was called
(though note that this isn't a real guarantee until after completing the work on
#69426)
* `DiagnosticBuilder<()>` for everything else (warnings, notes, etc.)
* can also be obtained from other `DiagnosticBuilder`s by calling `.forget_guarantee()`
This PR is a companion to other ongoing work, namely:
* #69426
and it's ongoing implementation:
#93222
the API changes in this PR are needed to get statically-checked "only errors produce `ErrorReported` from `.emit()`", but doesn't itself provide any really strong guarantees without those other `ErrorReported` changes
* #93244
would make the choices of API changes (esp. naming) in this PR fit better overall
In order to be able to let `.emit()` return anything trustable, several changes had to be made:
* `Diagnostic`'s `level` field is now private to `rustc_errors`, to disallow arbitrary "downgrade"s from "some kind of error" to "warning" (or anything else that doesn't cause compilation to fail)
* it's still possible to replace the whole `Diagnostic` inside the `DiagnosticBuilder`, sadly, that's harder to fix, but it's unlikely enough that we can paper over it with asserts on `.emit()`
* `.cancel()` now consumes `DiagnosticBuilder`, preventing `.emit()` calls on a cancelled diagnostic
* it's also now done internally, through `DiagnosticBuilder`-private state, instead of having a `Level::Cancelled` variant that can be read (or worse, written) by the user
* this removes a hazard of calling `.cancel()` on an error then continuing to attach details to it, and even expect to be able to `.emit()` it
* warnings were switched to *only* `can_emit_warnings` on emission (instead of pre-cancelling early)
* `struct_dummy` was removed (as it relied on a pre-`Cancelled` `Diagnostic`)
* since `.emit()` doesn't consume the `DiagnosticBuilder` <sub>(I tried and gave up, it's much more work than this PR)</sub>,
we have to make `.emit()` idempotent wrt the guarantees it returns
* thankfully, `err.emit(); err.emit();` can return `ErrorReported` both times, as the second `.emit()` call has no side-effects *only* because the first one did do the appropriate emission
* `&mut Diagnostic` is now used in a lot of function signatures, which used to take `&mut DiagnosticBuilder` (in the interest of not having to make those functions generic)
* the APIs were already mostly identical, allowing for low-effort porting to this new setup
* only some of the suggestion methods needed some rework, to have the extra `DiagnosticBuilder` functionality on the `Diagnostic` methods themselves (that change is also present in #93259)
* `.emit()`/`.cancel()` aren't available, but IMO calling them from an "error decorator/annotator" function isn't a good practice, and can lead to strange behavior (from the caller's perspective)
* `.downgrade_to_delayed_bug()` was added, letting you convert any `.is_error()` diagnostic into a `delay_span_bug` one (which works because in both cases the guarantees available are the same)
This PR should ideally be reviewed commit-by-commit, since there is a lot of fallout in each.
r? `@estebank` cc `@Manishearth` `@nikomatsakis` `@mark-i-m`
Improve `--check-cfg` implementation
This pull-request is a mix of improvements regarding the `--check-cfg` implementation:
- Simpler internal representation (usage of `Option` instead of separate bool)
- Add --check-cfg to the unstable book (based on the RFC)
- Improved diagnostics:
* List possible values when the value is unexpected
* Suggest if possible a name or value that is similar
- Add more tests (well known names, mix of combinations, ...)
r? ```@petrochenkov```
Adopt let else in more places
Continuation of #89933, #91018, #91481, #93046, #93590, #94011.
I have extended my clippy lint to also recognize tuple passing and match statements. The diff caused by fixing it is way above 1 thousand lines. Thus, I split it up into multiple pull requests to make reviewing easier. This is the biggest of these PRs and handles the changes outside of rustdoc, rustc_typeck, rustc_const_eval, rustc_trait_selection, which were handled in PRs #94139, #94142, #94143, #94144.
Even if we emit metadata disabling branch protection, this metadata may
conflict with other modules (e.g. during LTO) that have different branch
protection metadata set.
This is an unstable flag and feature, so ideally the flag not being
specified should act as if the feature wasn't implemented in the first
place.
Additionally this PR also ensures we emit an error if
`-Zbranch-protection` is set on targets other than the supported
aarch64. For now the error is being output from codegen, but ideally it
should be moved to earlier in the pipeline before stabilization.
Deny mixing bin crate type with lib crate types
The produced library would get a main shim too which conflicts with the
main shim of the executable linking the library.
```
$ cat > main1.rs <<EOF
fn main() {}
pub fn bar() {}
EOF
$ cat > main2.rs <<EOF
extern crate main1;
fn main() {
main1::bar();
}
EOF
$ rustc --crate-type bin --crate-type lib main1.rs
$ rustc -L. main2.rs
error: linking with `cc` failed: exit status: 1
[...]
= note: /usr/bin/ld: /tmp/crate_bin_lib/libmain1.rlib(main1.main1.707747aa-cgu.0.rcgu.o): in function `main':
main1.707747aa-cgu.0:(.text.main+0x0): multiple definition of `main'; main2.main2.02a148fe-cgu.0.rcgu.o:main2.02a148fe-cgu.0:(.text.main+0x0): first defined here
collect2: error: ld returned 1 exit status
```
1. It captured stdout and not stderr
2. It isn't used anywhere
3. All error messages should go to the DiagnosticOutput instead
4. It modifies thread local state
The only difference between the default and rustc_interface set version
is that the default accesses the source map from SESSION_GLOBALS while
the rustc_interface version accesses the source map from the global
TyCtxt. SESSION_GLOBALS is always set while running the compiler while
the global TyCtxt is not always set. If the global TyCtxt is set, it's
source map is identical to the one in SESSION_GLOBALS
This ensures that it is called even when run_in_thread_pool_with_globals
is avoided and reduces code duplication between the parallel and
non-parallel version of run_in_thread_pool_with_globals
This option introduced in #15820 allows a custom crate to be imported in
the place of std, but with the name std. I don't think there is any
value to this. At most it is confusing users of a driver that uses this option. There are no users of
this option on github. If anyone still needs it, they can emulate it
injecting #![no_core] in addition to their own prelude.
Ensure that queries only return Copy types.
This should pervent the perf footgun of returning a result with an expensive `Clone` impl (like a `Vec` of a hash map).
I went for the stupid solution of allocating on an arena everything that was not `Copy`. Some query results could be made Copy easily, but I did not really investigate.
Delete -Zquery-stats infrastructure
These statistics are computable from the self-profile data and/or ad-hoc collectable as needed, and in the meantime contribute to rustc bootstrap times -- locally, this PR shaves ~2.5% from rustc_query_impl builds in instruction counts.
If this does lose some functionality we want to keep, I think we should migrate it to self-profile (or a similar interface) rather than this ad-hoc reporting.
Store rlink data in opaque binary format on disk
This removes one of the only uses of JSON decoding (to Rust structs) from the compiler, and fixes the FIXME comment. It's not clear to me what the reason for using JSON here originally was, and from what I can tell nothing outside of rustc expects to read the emitted information, so it seems like a reasonable step to move it to the metadata-encoding format (rustc_serialize::opaque).
Mostly intended as a FIXME fix, though potentially a stepping stone to dropping the support for Decodable to be used to decode JSON entirely (allowing for better/faster APIs on the Decoder trait).
cc #64191
These statistics are computable from the self-profile data and/or ad-hoc
collectable as needed, and in the meantime contribute to rustc bootstrap times.
Stabilize `-Z instrument-coverage` as `-C instrument-coverage`
(Tracking issue for `instrument-coverage`: https://github.com/rust-lang/rust/issues/79121)
This PR stabilizes support for instrumentation-based code coverage, previously provided via the `-Z instrument-coverage` option. (Continue supporting `-Z instrument-coverage` for compatibility for now, but show a deprecation warning for it.)
Many, many people have tested this support, and there are numerous reports of it working as expected.
Move the documentation from the unstable book to stable rustc documentation. Update uses and documentation to use the `-C` option.
Addressing questions raised in the tracking issue:
> If/when stabilized, will the compiler flag be updated to -C instrument-coverage? (If so, the -Z variant could also be supported for some time, to ease migrations for existing users and scripts.)
This stabilization PR updates the option to `-C` and keeps the `-Z` variant to ease migration.
> The Rust coverage implementation depends on (and automatically turns on) -Z symbol-mangling-version=v0. Will stabilizing this feature depend on stabilizing v0 symbol-mangling first? If so, what is the current status and timeline?
This stabilization PR depends on https://github.com/rust-lang/rust/pull/90128 , which stabilizes `-C symbol-mangling-version=v0` (but does not change the default symbol-mangling-version).
> The Rust coverage implementation implements the latest version of LLVM's Coverage Mapping Format (version 4), which forces a dependency on LLVM 11 or later. A compiler error is generated if attempting to compile with coverage, and using an older version of LLVM.
Given that LLVM 13 has now been released, requiring LLVM 11 for coverage support seems like a reasonable requirement. If people don't have at least LLVM 11, nothing else breaks; they just can't use coverage support. Given that coverage support currently requires a nightly compiler and LLVM 11 or newer, allowing it on a stable compiler built with LLVM 11 or newer seems like an improvement.
The [tracking issue](https://github.com/rust-lang/rust/issues/79121) and the [issue label A-code-coverage](https://github.com/rust-lang/rust/labels/A-code-coverage) link to a few open issues related to `instrument-coverage`, but none of them seem like showstoppers. All of them seem like improvements and refinements we can make after stabilization.
The original `-Z instrument-coverage` support went through a compiler-team MCP at https://github.com/rust-lang/compiler-team/issues/278 . Based on that, `@pnkfelix` suggested that this needed a stabilization PR and a compiler-team FCP.
Make dead code check a query.
Dead code check is run for each invocation of the compiler, even if no modifications were involved.
This PR makes dead code check a query keyed on the module. This allows to skip the check when a module has not changed.
To perform this, a query `live_symbols_and_ignored_derived_traits` is introduced to encapsulate the global analysis of finding live symbols. The second query `check_mod_deathness` outputs diagnostics for each module based on this first query's results.
Use consistent function parameter order for early context construction and early linting
Rename some functions to make it clear that they do not necessarily work on the whole crate
Improve error message for key="value" cfg arguments.
Hi, I ran into difficulties using the `--cfg` flag syntax, first hit when googling for the error was issue https://github.com/rust-lang/rust/issues/66450. Reading that issue, it sounded like the best way to improve the experience was to improve the error message, this is low risk and doesn't introduce any additional argument parsing.
The issue mentions that it is entirely dependent on the shell, while this may be true, I think guiding the the user into the realization that the quotes may need to be escaped is helpful. The two suggested escapings both work in Bash and in the Windows command prompt.
fyi `@ehuss`
Stabilize `-Z print-link-args` as `--print link-args`
We have stable options for adding linker arguments; we should have a
stable option to help debug linker arguments.
Add documentation for the new option. In the documentation, make it clear that
the *exact* format of the output is not a stable guarantee.
Implement raw-dylib support for windows-gnu
Add support for `#[link(kind = "raw-dylib")]` on windows-gnu targets. Work around binutils's linker's inability to read import libraries produced by LLVM by calling out to the binutils `dlltool` utility to create an import library from a temporary .DEF file; this approach is effectively a slightly refined version of `@mati865's` earlier attempt at this strategy in PR #88801. (In particular, this attempt at this strategy adds support for `#[link_ordinal(...)]` as well.)
In support of #58713.
Replace use of `ty()` on term and use it in more places. This will allow more flexibility in the
future, but slightly worried it allows items which are consts which only accept types.
The produced library would get a main shim too which conflicts with the
main shim of the executable linking the library.
```
$ cat > main1.rs <<EOF
fn main() {}
pub fn bar() {}
EOF
$ cat > main2.rs <<EOF
extern crate main1;
fn main() {
main1::bar();
}
EOF
$ rustc --crate-type bin --crate-type lib main1.rs
$ rustc -L. main2.rs
error: linking with `cc` failed: exit status: 1
[...]
= note: /usr/bin/ld: /tmp/crate_bin_lib/libmain1.rlib(main1.main1.707747aa-cgu.0.rcgu.o): in function `main':
main1.707747aa-cgu.0:(.text.main+0x0): multiple definition of `main'; main2.main2.02a148fe-cgu.0.rcgu.o:main2.02a148fe-cgu.0:(.text.main+0x0): first defined here
collect2: error: ld returned 1 exit status
```
Stabilize -Z symbol-mangling-version=v0 as -C symbol-mangling-version=v0
This allows selecting `v0` symbol-mangling without an unstable option. Selecting `legacy` still requires -Z unstable-options.
This does not change the default symbol-mangling-version. See https://github.com/rust-lang/rust/pull/89917 for a pull request changing the default. Rationale, from #89917:
Rust's current mangling scheme depends on compiler internals; loses information about generic parameters (and other things) which makes for a worse experience when using external tools that need to interact with Rust symbol names; is inconsistent; and can contain . characters which aren't universally supported. Therefore, Rust has defined its own symbol mangling scheme which is defined in terms of the Rust language, not the compiler implementation; encodes information about generic parameters in a reversible way; has a consistent definition; and generates symbols that only use the characters A-Z, a-z, 0-9, and _.
Support for the new Rust symbol mangling scheme has been added to upstream tools that will need to interact with Rust symbols (e.g. debuggers).
This pull request allows enabling the new v0 symbol-mangling-version.
See #89917 for references to the implementation of v0, and for references to the tool changes to decode Rust symbols.
Continue supporting -Z instrument-coverage for compatibility for now,
but show a deprecation warning for it.
Update uses and documentation to use the -C option.
Move the documentation from the unstable book to stable rustc
documentation.
This allows selecting `v0` symbol-mangling without an unstable option.
Selecting `legacy` still requires -Z unstable-options.
Continue supporting -Z symbol-mangling-version for compatibility for
now, but show a deprecation warning for it.
Emit an error for `--cfg=)`
Fixes#73026
See also: #64467, #89468
The issue stems from a `FatalError` being silently raised in
`panictry_buffer`. Normally this is not a problem, because
`panictry_buffer` emits the causes of the error, but they are not
themselves fatal, so they get filtered out by the silent emitter.
To fix this, we use a parser entrypoint which doesn't use
`panictry_buffer`, and we handle the error ourselves.
Fixes#73026
See also: #64467, #89468
The issue stems from a `FatalError` being silently raised in
`panictry_buffer`. Normally this is not a problem, because
`panictry_buffer` emits the causes of the error, but they are not
themselves fatal, so they get filtered out by the silent emitter.
To fix this, we use a parser entrypoint which doesn't use
`panictry_buffer`, and we handle the error ourselves.
Add Attribute::meta_kind
The `AttrItem::meta` function is being called on a lot of places, however almost always the caller is only interested in the `kind` of the result `MetaItem`. Before, the `path` had to be cloned in order to get the kind, now it does not have to be.
There is a larger related "problem". In a lot of places, something wants to know contents of attributes. This is accessed through `Attribute::meta_item_list`, which calls `AttrItem::meta` (now `AttrItem::meta_kind`), among other methods. When this function is called, the meta item list has to be recreated from scratch. Everytime something asks a simple question (like is this item/list of attributes `#[doc(hidden)]`?), the tokens of the attribute(s) are cloned, parsed and the results are allocated on the heap. That seems really unnecessary. What would be the best way to cache this? Turn `meta_item_list` into a query perhaps? Related PR: https://github.com/rust-lang/rust/pull/92227
r? rust-lang/rustdoc
Add codegen option for branch protection and pointer authentication on AArch64
The branch-protection codegen option enables the use of hint-space pointer
authentication code for AArch64 targets.
Remove `SymbolStr`
This was originally proposed in https://github.com/rust-lang/rust/pull/74554#discussion_r466203544. As well as removing the icky `SymbolStr` type, it allows the removal of a lot of `&` and `*` occurrences.
Best reviewed one commit at a time.
r? `@oli-obk`
By changing `as_str()` to take `&self` instead of `self`, we can just
return `&str`. We're still lying about lifetimes, but it's a smaller lie
than before, where `SymbolStr` contained a (fake) `&'static str`!
The resulting profile will include the crate name and will be stored in
the `--out-dir` directory.
This implementation makes it convenient to use LLVM time trace together
with cargo, in the contrast to the previous implementation which would
overwrite profiles or store them in `.cargo/registry/..`.
replace dynamic library module with libloading
This PR deletes the `rustc_metadata::dynamic_lib` module in favor of the popular and better tested [`libloading` crate](https://github.com/nagisa/rust_libloading/).
We don't benefit from `libloading`'s symbol lifetimes since we end up leaking the loaded library in all cases, but the call-sites look much nicer by improving error handling and abstracting away some transmutes. We also can remove `rustc_metadata`'s direct dependencies on `libc` and `winapi`.
This PR also adds an exception for `libloading` (and its license) to tidy, so this will need sign-off from the compiler team.
- Changed the separator from '+' to ','.
- Moved the branch protection options from -C to -Z.
- Additional test for incorrect branch-protection option.
- Remove LLVM < 12 code.
- Style fixes.
Co-authored-by: James McGregor <james.mcgregor2@arm.com>
LLVM has built-in heuristics for adding stack canaries to functions. These
heuristics can be selected with LLVM function attributes. This patch adds a
rustc option `-Z stack-protector={none,basic,strong,all}` which controls the use
of these attributes. This gives rustc the same stack smash protection support as
clang offers through options `-fno-stack-protector`, `-fstack-protector`,
`-fstack-protector-strong`, and `-fstack-protector-all`. The protection this can
offer is demonstrated in test/ui/abi/stack-protector.rs. This fills a gap in the
current list of rustc exploit
mitigations (https://doc.rust-lang.org/rustc/exploit-mitigations.html),
originally discussed in #15179.
Stack smash protection adds runtime overhead and is therefore still off by
default, but now users have the option to trade performance for security as they
see fit. An example use case is adding Rust code in an existing C/C++ code base
compiled with stack smash protection. Without the ability to add stack smash
protection to the Rust code, the code base artifacts could be exploitable in
ways not possible if the code base remained pure C/C++.
Stack smash protection support is present in LLVM for almost all the current
tier 1/tier 2 targets: see
test/assembly/stack-protector/stack-protector-target-support.rs. The one
exception is nvptx64-nvidia-cuda. This patch follows clang's example, and adds a
warning message printed if stack smash protection is used with this target (see
test/ui/stack-protector/warn-stack-protector-unsupported.rs). Support for tier 3
targets has not been checked.
Since the heuristics are applied at the LLVM level, the heuristics are expected
to add stack smash protection to a fraction of functions comparable to C/C++.
Some experiments demonstrating how Rust code is affected by the different
heuristics can be found in
test/assembly/stack-protector/stack-protector-heuristics-effect.rs. There is
potential for better heuristics using Rust-specific safety information. For
example it might be reasonable to skip stack smash protection in functions which
transitively only use safe Rust code, or which uses only a subset of functions
the user declares safe (such as anything under `std.*`). Such alternative
heuristics could be added at a later point.
LLVM also offers a "safestack" sanitizer as an alternative way to guard against
stack smashing (see #26612). This could possibly also be included as a
stack-protection heuristic. An alternative is to add it as a sanitizer (#39699).
This is what clang does: safestack is exposed with option
`-fsanitize=safe-stack`.
The options are only supported by the LLVM backend, but as with other codegen
options it is visible in the main codegen option help menu. The heuristic names
"basic", "strong", and "all" are hopefully sufficiently generic to be usable in
other backends as well.
Reviewed-by: Nikita Popov <nikic@php.net>
Extra commits during review:
- [address-review] make the stack-protector option unstable
- [address-review] reduce detail level of stack-protector option help text
- [address-review] correct grammar in comment
- [address-review] use compiler flag to avoid merging functions in test
- [address-review] specify min LLVM version in fortanix stack-protector test
Only for Fortanix test, since this target specifically requests the
`--x86-experimental-lvi-inline-asm-hardening` flag.
- [address-review] specify required LLVM components in stack-protector tests
- move stack protector option enum closer to other similar option enums
- rustc_interface/tests: sort debug option list in tracking hash test
- add an explicit `none` stack-protector option
Revert "set LLVM requirements for all stack protector support test revisions"
This reverts commit a49b74f92a4e7d701d6f6cf63d207a8aff2e0f68.
Try all stable method candidates first before trying unstable ones
Currently we try methods in this order in each step:
* Stable by value
* Unstable by value
* Stable autoref
* Unstable autoref
* ...
This PR changes it to first try pick methods without any unstable candidates, and if none is found, try again to pick unstable ones.
Fix#90320
CC #88971, hopefully would allow us to rename the "unstable_*" methods for integer impls back.
`@rustbot` label T-compiler T-libs-api
Leave -Z strip available temporarily as an alias, to avoid breaking
cargo until cargo transitions to using -C strip. (If the user passes
both, the -C version wins.)
Added the --temps-dir option
Fixes#10971.
The new `--temps-dir` option puts intermediate files in a user-specified directory. This provides a fix for the issue where parallel invocations of rustc would overwrite each other's intermediate files.
No files are kept in the intermediate directory unless `-C save-temps=yes`.
If additional files are specifically requested using `--emit asm,llvm-bc,llvm-ir,obj,metadata,link,dep-info,mir`, these will be put in the output directory rather than the intermediate directory.
This is a backward-compatible change, i.e. if `--temps-dir` is not specified, the behavior is the same as before.
TraitKind -> Trait
TyAliasKind -> TyAlias
ImplKind -> Impl
FnKind -> Fn
All `*Kind`s in AST are supposed to be enums.
Tuple structs are converted to braced structs for the types above, and fields are reordered in syntactic order.
Also, mutable AST visitor now correctly visit spans in defaultness, unsafety, impl polarity and constness.
Avoid a branch on key being local for queries that use the same local and extern providers
Currently based on https://github.com/rust-lang/rust/pull/85810 as it slightly conflicts with it. Only the last two commits are new.
Add -Z no-unique-section-names to reduce ELF header bloat.
This change adds a new compiler flag that can help reduce the size of ELF binaries that contain many functions.
By default, when enabling function sections (which is the default for most targets), the LLVM backend will generate different section names for each function. For example, a function `func` would generate a section called `.text.func`. Normally this is fine because the linker will merge all those sections into a single one in the binary. However, starting with [LLVM 12](https://github.com/llvm/llvm-project/commit/ee5d1a04), the backend will also generate unique section names for exception handling, resulting in thousands of `.gcc_except_table.*` sections ending up in the final binary because some linkers like LLD don't currently merge or strip these EH sections (see discussion [here](https://reviews.llvm.org/D83655)). This can bloat the ELF headers and string table significantly in binaries that contain many functions.
The new option is analogous to Clang's `-fno-unique-section-names`, and instructs LLVM to generate the same `.text` and `.gcc_except_table` section for each function, resulting in a smaller final binary.
The motivation to add this new option was because we have a binary that ended up with so many ELF sections (over 65,000) that it broke some existing ELF tools, which couldn't handle so many sections.
Here's our old binary:
```
$ readelf --sections old.elf | head -1
There are 71746 section headers, starting at offset 0x2a246508:
$ readelf --sections old.elf | grep shstrtab
[71742] .shstrtab STRTAB 0000000000000000 2977204c ad44bb 00 0 0 1
```
That's an 11MB+ string table. Here's the new binary using this option:
```
$ readelf --sections new.elf | head -1
There are 43 section headers, starting at offset 0x29143ca8:
$ readelf --sections new.elf | grep shstrtab
[40] .shstrtab STRTAB 0000000000000000 29143acc 0001db 00 0 0 1
```
The whole binary size went down by over 20MB, which is quite significant.
Implement -Z location-detail flag
This PR implements the `-Z location-detail` flag as described in https://github.com/rust-lang/rfcs/pull/2091 .
`-Z location-detail=val` controls what location details are tracked when using `caller_location`. This allows users to control what location details are printed as part of panic messages, by allowing them to exclude any combination of filenames, line numbers, and column numbers. This option is intended to provide users with a way to mitigate the size impact of `#[track_caller]`.
Some measurements of the savings of this approach on an embedded binary can be found here: https://github.com/rust-lang/rust/issues/70579#issuecomment-942556822 .
Closes#70580 (unless people want to leave that open as a place for discussion of further improvements).
This is my first real PR to rust, so any help correcting mistakes / understanding side effects / improving my tests is appreciated :)
I have one question: RFC 2091 specified this as a debugging option (I think that is what -Z implies?). Does that mean this can never be stabilized without a separate MCP? If so, do I need to submit an MCP now, or is the initial RFC specifying this option sufficient for this to be merged as is, and then an MCP would be needed for eventual stabilization?
Report fatal lexer errors in `--cfg` command line arguments
Fixes#89358. The erroneous behavior was apparently introduced by `@Mark-Simulacrum` in a678e31911; the idea is to silence individual parser errors and instead emit one catch-all error message after parsing. However, for the example in #89358, a fatal lexer error is created here:
edebf77e00/compiler/rustc_parse/src/lexer/mod.rs (L340-L349)
This fatal error aborts the compilation, and so the call to `new_parser_from_source_str()` never returns and the catch-all error message is never emitted. I have therefore changed the `SilentEmitter` to silence only non-fatal errors; with my changes, for the rustc invocation described in #89358:
```sh
rustc --cfg "abc\""
```
I get the following output:
```
error[E0765]: unterminated double quote string
|
= note: this error occurred on the command line: `--cfg=abc"`
```
This change adds a new compiler flag that can help reduce the size of
ELF binaries that contain many functions.
By default, when enabling function sections (which is the default for most
targets), the LLVM backend will generate different section names for each
function. For example, a function "func" would generate a section called
".text.func". Normally this is fine because the linker will merge all those
sections into a single one in the binary. However, starting with LLVM 12
(llvm/llvm-project@ee5d1a0), the backend will
also generate unique section names for exception handling, resulting in
thousands of ".gcc_except_table.*" sections ending up in the final binary
because some linkers don't currently merge or strip these EH sections.
This can bloat the ELF headers and string table significantly in
binaries that contain many functions.
The new option is analogous to Clang's -fno-unique-section-names, and
instructs LLVM to generate the same ".text" and ".gcc_except_table"
section for each function, resulting in smaller object files and
potentially a smaller final binary.
This largely involves implementing the options debug-info-for-profiling
and profile-sample-use and forwarding them on to LLVM.
AutoFDO can be used on x86-64 Linux like this:
rustc -O -Cdebug-info-for-profiling main.rs -o main
perf record -b ./main
create_llvm_prof --binary=main --out=code.prof
rustc -O -Cprofile-sample-use=code.prof main.rs -o main2
Now `main2` will have feedback directed optimization applied to it.
The create_llvm_prof tool can be obtained from this github repository:
https://github.com/google/autofdoFixes#64892.
Fix clippy lints
I'm currently working on allowing clippy to run on librustdoc after a discussion I had with `@Mark-Simulacrum.` So in the meantime, I fixed a few lints on the compiler crates.
Rework HIR API to make invocations of the hir_crate query harder.
`hir_crate` forces the recomputation of queries that depend on it.
This PR aims at avoiding useless invocations of `hir_crate` by making dependent code go through `tcx.hir()`.
Pass real crate-level attributes to `pre_expansion_lint`
The PR concerns the unstable feature `register_tool` (#66079).
The feature's implementation requires the attributes of the crate being compiled, so that when attributes like `allow(foo::bar)` are encountered, it can be verified that `register_tool(foo)` appears in the crate root.
However, the crate's attributes are not readily available during early lint passes. Specifically, on this line, `krate.attrs` appears to be the attributes of the current source file, not the attributes of the whole crate: bf642323d6/compiler/rustc_lint/src/context.rs (L815)
Consequently, "unknown tool" errors were being produced when `allow(foo::bar)` appeared in a submodule, even though `register_tool(foo)` appeared in the crate root.
EDITED: The proposed fix is to obtain the real crate-level attributes in `configure_and_expand` and pass them to `pre_expansion_lint`. (See `@petrochenkov's` [comment](https://github.com/rust-lang/rust/pull/89214#issuecomment-926927072) below.)
The original "prosed fix" text follows.
---
The proposed fix is to add an `error_on_unknown_tool` flag to `LintLevelsBuilder`. The flag controls whether "unknown tool" errors are emitted. The flag is set during late passes, but not earlier.
More specifically, this PR contains two commits:
* The first adds a `known-tool-in-submodule` UI test that does not currently pass.
* The second adds the `error_on_unknown_tool` flag. The new test passes with the addition of this flag.
This change has the added benefit of eliminating some errors that were duplicated in existing tests.
To the reviewer: please check that I implemented the UI test correctly.
This just applies the suggested fixes from the compatibility warnings,
leaving any that are in practice spurious in. This is primarily intended to
provide a starting point to identify possible fixes to the migrations (e.g., by
avoiding spurious warnings).
A secondary commit cleans these up where they are false positives (as is true in
many of the cases).
Gather module items after lowering.
This avoids having a non-local analysis inside lowering.
By implementing `hir_module_items` using a visitor, we make sure that iterations and visitors are consistent.
Introduce -Z remap-cwd-prefix switch
This switch remaps any absolute paths rooted under the current
working directory to a new value. This includes remapping the
debug info in `DW_AT_comp_dir` and `DW_AT_decl_file`.
Importantly, this flag does not require passing the current working
directory to the compiler, such that the command line can be
run on any machine (with the same input files) and produce the
same results. This is critical property for debugging compiler
issues that crop up on remote machines.
This is based on adetaylor's dbc4ae7cba
Major Change Proposal: https://github.com/rust-lang/compiler-team/issues/450
Discussed on #38322. Would resolve issue #87325.
Add -Z panic-in-drop={unwind,abort} command-line option
This PR changes `Drop` to abort if an unwinding panic attempts to escape it, making the process abort instead. This has several benefits:
- The current behavior when unwinding out of `Drop` is very unintuitive and easy to miss: unwinding continues, but the remaining drops in scope are simply leaked.
- A lot of unsafe code doesn't expect drops to unwind, which can lead to unsoundness:
- https://github.com/servo/rust-smallvec/issues/14
- https://github.com/bluss/arrayvec/issues/3
- There is a code size and compilation time cost to this: LLVM needs to generate extra landing pads out of all calls in a drop implementation. This can compound when functions are inlined since unwinding will then continue on to process drops in the callee, which can itself unwind, etc.
- Initial measurements show a 3% size reduction and up to 10% compilation time reduction on some crates (`syn`).
One thing to note about `-Z panic-in-drop=abort` is that *all* crates must be built with this option for it to be sound since it makes the compiler assume that dropping `Box<dyn Any>` will never unwind.
cc https://github.com/rust-lang/lang-team/issues/97
Avoid invoking the hir_crate query to traverse the HIR
Walking the HIR tree is done using the `hir_crate` query. However, this is unnecessary, since `hir_owner(CRATE_DEF_ID)` provides the same information. Since depending on `hir_crate` forces dependents to always be executed, this leads to unnecessary work.
By splitting HIR and attributes visits, we can avoid an edge to `hir_crate` when trying to visit the HIR tree.
Detect bare blocks with type ascription that were meant to be a `struct` literal
Address part of #34255.
Potential improvement: silence the other knock down errors in `issue-34255-1.rs`.
Instead of updating global state to mark attributes as used,
we now explicitly emit a warning when an attribute is used in
an unsupported position. As a side effect, we are to emit more
detailed warning messages (instead of just a generic "unused" message).
`Session.check_name` is removed, since its only purpose was to mark
the attribute as used. All of the callers are modified to use
`Attribute.has_name`
Additionally, `AttributeType::AssumedUsed` is removed - an 'assumed
used' attribute is implemented by simply not performing any checks
in `CheckAttrVisitor` for a particular attribute.
We no longer emit unused attribute warnings for the `#[rustc_dummy]`
attribute - it's an internal attribute used for tests, so it doesn't
mark sense to treat it as 'unused'.
With this commit, a large source of global untracked state is removed.
This was removed by #85284 in favor of -Zprofiler-runtime=<name>.
However the suggested -Zprofiler-runtime=None doesn't work because
"None" is treated as a crate name.
Since RFC 3052 soft deprecated the authors field anyway, hiding it from
crates.io, docs.rs, and making Cargo not add it by default, and it is
not generally up to date/useful information, we should remove it from
crates in this repo.
Add flag to configure `large_assignments` lint
The `large_assignments` lints detects moves over specified limit. The
limit is configured through `move_size_limit = "N"` attribute placed at
the root of a crate. When attribute is absent, the lint is disabled.
Make it possible to enable the lint without making any changes to the
source code, through a new flag `-Zmove-size-limit=N`. For example, to
detect moves exceeding 1023 bytes in a cargo crate, including all
dependencies one could use:
```
$ env RUSTFLAGS=-Zmove-size-limit=1024 cargo build -vv
```
Lint tracking issue #83518.
Add -Zfuture-incompat-test to assist with testing future-incompat reports.
This adds a `-Zfuture-incompat-test` cli flag to assist with testing future-incompatible reports. This flag causes all lints to be treated as a future-incompatible lint, and will emit a report for them. This is being added so that Cargo's testsuite can reliably test the reporting infrastructure. Right now, Cargo relies on using array_into_iter as a test subject. Since the breaking "future incompatible" lints are never intended to last forever, this means Cargo's testsuite would always need to keep changing to choose different lints (for example, #86330 proposed dropping that moniker for array_into_iter). With this flag, Cargo's tests can trigger any lint and check for the report.
The `large_assignments` lints detects moves over specified limit. The
limit is configured through `move_size_limit = "N"` attribute placed at
the root of a crate. When attribute is absent, the lint is disabled.
Make it possible to enable the lint without making any changes to the
source code, through a new flag `-Zmove-size-limit=N`. For example, to
detect moves exceeding 1023 bytes in a cargo crate, including all
dependencies one could use:
```
$ env RUSTFLAGS=-Zmove-size-limit=1024 cargo build -vv
```
Remove unused dependencies from compiler crates
Various compiler crates have dependencies that they don't appear to use. I used some scripting to detect such dependencies, filtered them based on some manual review, and removed those that do indeed appear to be entirely unused.
This creates a CSV with name "closure_profile_XXXXX.csv", where the
variable part is the process id of the compiler.
To profile a cargo project you can run one of the following depending on
if you're compiling a library or a binary:
```
cargo +stage1 rustc --lib -- -Zprofile-closures
cargo +stage1 rustc --bin -- -Zprofile-closures
```
Allow loading of llvm plugins on nightly
Based on a discussion in #82734 / with `@wsmoses.`
Mainly moves [this](0149bc4e7e) behind a -Z flag, so it can only be used on nightly,
as requested by `@nagisa` in https://github.com/rust-lang/rust/issues/82734#issuecomment-835863940
This change allows loading of llvm plugins like Enzyme.
Right now it also requires a shared library LLVM build of rustc for symbol resolution.
```rust
// test.rs
extern { fn __enzyme_autodiff(_: usize, ...) -> f64; }
fn square(x : f64) -> f64 {
return x * x;
}
fn main() {
unsafe {
println!("Hello, world {} {}!", square(3.0), __enzyme_autodiff(square as usize, 3.0));
}
}
```
```
./rustc test.rs -Z llvm-plugins="./LLVMEnzyme-12.so" -C passes="enzyme"
./test
Hello, world 9 6!
```
I will try to figure out how to simplify the usage and get this into stable in a later iteration,
but having this on nightly will already help testing further steps.
Provide option for specifying the profiler runtime
Currently, if `-Zinstrument-coverage` is enabled, the target is linked
against the `library/profiler_builtins` crate (which pulls in LLVM's
compiler-rt runtime).
This option enables backends to specify an alternative runtime crate for
handling injected instrumentation calls.
Don't use a generator for BoxedResolver
The generator is non-trivial and requires unsafe code anyway. Using regular unsafe code without a generator is much easier to follow.
Based on #85810 as it touches rustc_interface too.
Driver improvements
This PR contains a couple of cleanups for the driver and a few small improvements for the custom codegen backend interface. It also implements `--version` and `-Cpasses=list` support for custom codegen backends.
rustc: Store metadata-in-rlibs in object files
This commit updates how rustc compiler metadata is stored in rlibs.
Previously metadata was stored as a raw file that has the same format as
`--emit metadata`. After this commit, however, the metadata is encoded
into a small object file which has one section which is the contents of
the metadata.
The motivation for this commit is to fix a common case where #83730
arises. The problem is that when rustc crates a `dylib` crate type it
needs to include entire rlib files into the dylib, so it passes
`--whole-archive` (or the equivalent) to the linker. The problem with
this, though, is that the linker will attempt to read all files in the
archive. If the metadata file were left as-is (today) then the linker
would generate an error saying it can't read the file. The previous
solution was to alter the rlib just before linking, creating a new
archive in a temporary directory which has the metadata file removed.
This problem from before this commit is now removed if the metadata file
is stored in an object file that the linker can read. The only caveat we
have to take care of is to ensure that the linker never actually
includes the contents of the object file into the final output. We apply
similar tricks as the `.llvmbc` bytecode sections to do this.
This involved changing the metadata loading code a bit, namely updating
some of the LLVM C APIs used to use non-deprecated ones and fiddling
with the lifetimes a bit to get everything to work out. Otherwise though
this isn't intended to be a functional change really, only that metadata
is stored differently in archives now.
This should end up fixing #83730 because by default dylibs will no
longer have their rlib dependencies "altered" meaning that
split-debuginfo will continue to have valid paths pointing at the
original rlibs. (note that we still "alter" rlibs if LTO is enabled to
remove Rust object files and we also "alter" for the #[link(cfg)]
feature, but that's rarely used).
Closes#83730
This commit updates how rustc compiler metadata is stored in rlibs.
Previously metadata was stored as a raw file that has the same format as
`--emit metadata`. After this commit, however, the metadata is encoded
into a small object file which has one section which is the contents of
the metadata.
The motivation for this commit is to fix a common case where #83730
arises. The problem is that when rustc crates a `dylib` crate type it
needs to include entire rlib files into the dylib, so it passes
`--whole-archive` (or the equivalent) to the linker. The problem with
this, though, is that the linker will attempt to read all files in the
archive. If the metadata file were left as-is (today) then the linker
would generate an error saying it can't read the file. The previous
solution was to alter the rlib just before linking, creating a new
archive in a temporary directory which has the metadata file removed.
This problem from before this commit is now removed if the metadata file
is stored in an object file that the linker can read. The only caveat we
have to take care of is to ensure that the linker never actually
includes the contents of the object file into the final output. We apply
similar tricks as the `.llvmbc` bytecode sections to do this.
This involved changing the metadata loading code a bit, namely updating
some of the LLVM C APIs used to use non-deprecated ones and fiddling
with the lifetimes a bit to get everything to work out. Otherwise though
this isn't intended to be a functional change really, only that metadata
is stored differently in archives now.
This should end up fixing #83730 because by default dylibs will no
longer have their rlib dependencies "altered" meaning that
split-debuginfo will continue to have valid paths pointing at the
original rlibs. (note that we still "alter" rlibs if LTO is enabled to
remove Rust object files and we also "alter" for the #[link(cfg)]
feature, but that's rarely used).
Closes#83730
Remove unused feature gates
The first commit removes a usage of a feature gate, but I don't expect it to be controversial as the feature gate was only used to workaround a limitation of rust in the past. (closures never being `Clone`)
The second commit uses `#[allow_internal_unstable]` to avoid leaking the `trusted_step` feature gate usage from inside the index newtype macro. It didn't work for the `min_specialization` feature gate though.
The third commit removes (almost) all feature gates from the compiler that weren't used anyway.
Reduce the amount of untracked state in TyCtxt
Access to untracked global state may generate instances of #84970.
The GlobalCtxt contains the lowered HIR, the resolver outputs and interners.
By wrapping the resolver inside a query, we make sure those accesses are properly tracked.
As a no_hash query, all dependent queries essentially become `eval_always`,
what they should have been from the beginning.
Don't sort a `Vec` before computing its `DepTrackingHash`
Previously, we sorted the vec prior to hashing, making the hash
independent of the original (command-line argument) order. However, the
original vec was still always kept in the original order, so we were
relying on the rest of the compiler always working with it in an
'order-independent' way.
This assumption was not being upheld by the `native_libraries` query -
the order of the entires in its result depends on the order of entries
in `Options.libs`. This lead to an 'unstable fingerprint' ICE when the
`-l` arguments were re-ordered.
This PR removes the sorting logic entirely. Re-ordering command-line
arguments (without adding/removing/changing any arguments) seems like a
really niche use case, and correctly optimizing for it would require
additional work. By always hashing arguments in their original order, we
can entirely avoid a cause of 'unstable fingerprint' errors.
Previously, we sorted the vec prior to hashing, making the hash
independent of the original (command-line argument) order. However, the
original vec was still always kept in the original order, so we were
relying on the rest of the compiler always working with it in an
'order-independent' way.
This assumption was not being upheld by the `native_libraries` query -
the order of the entires in its result depends on the order of entries
in `Options.libs`. This lead to an 'unstable fingerprint' ICE when the
`-l` arguments were re-ordered.
This PR removes the sorting logic entirely. Re-ordering command-line
arguments (without adding/removing/changing any arguments) seems like a
really niche use case, and correctly optimizing for it would require
additional work. By always hashing arguments in their original order, we
can entirely avoid a cause of 'unstable fingerprint' errors.
Currently, if `-Zinstrument-coverage` is enabled, the target is linked
against the `library/profiler_builtins` crate (which pulls in LLVM's
compiler-rt runtime).
This option enables backends to specify an alternative runtime crate for
handling injected instrumentation calls.
Remove CrateNum parameter for queries that only work on local crate
The pervasive `CrateNum` parameter is a remnant of the multi-crate rustc idea.
Using `()` as query key in those cases avoids having to worry about the validity of the query key.
Introduce the beginning of a THIR unsafety checker
This poses the foundations for the THIR unsafety checker, so that it can be implemented incrementally:
- implements a rudimentary `Visitor` for the THIR (which will definitely need some tweaking in the future)
- introduces a new `-Zthir-unsafeck` flag which tells the compiler to use THIR unsafeck instead of MIR unsafeck
- implements detection of unsafe functions
- adds revisions to the UI tests to test THIR unsafeck alongside MIR unsafeck
This uses a very simple query design, where bodies are unsafety-checked on a body per body basis. This however has some big flaws:
- the unsafety-checker builds the THIR itself, which means a lot of work is duplicated with MIR building constructing its own copy of the THIR
- unsafety-checking closures is currently completely wrong: closures should take into account the "safety context" in which they are created, here we are considering that closures are always a safe context
I had intended to fix these problems in follow-up PRs since they are always gated under the `-Zthir-unsafeck` flag (which is explicitely noted to be unsound).
r? `@nikomatsakis`
cc https://github.com/rust-lang/project-thir-unsafeck/issues/3https://github.com/rust-lang/project-thir-unsafeck/issues/7
Fix `--remap-path-prefix` not correctly remapping `rust-src` component paths and unify handling of path mapping with virtualized paths
This PR fixes#73167 ("Binaries end up containing path to the rust-src component despite `--remap-path-prefix`") by preventing real local filesystem paths from reaching compilation output if the path is supposed to be remapped.
`RealFileName::Named` introduced in #72767 is now renamed as `LocalPath`, because this variant wraps a (most likely) valid local filesystem path.
`RealFileName::Devirtualized` is renamed as `Remapped` to be used for remapped path from a real path via `--remap-path-prefix` argument, as well as real path inferred from a virtualized (during compiler bootstrapping) `/rustc/...` path. The `local_path` field is now an `Option<PathBuf>`, as it will be set to `None` before serialisation, so it never reaches any build output. Attempting to serialise a non-`None` `local_path` will cause an assertion faliure.
When a path is remapped, a `RealFileName::Remapped` variant is created. The original path is preserved in `local_path` field and the remapped path is saved in `virtual_name` field. Previously, the `local_path` is directly modified which goes against its purpose of "suitable for reading from the file system on the local host".
`rustc_span::SourceFile`'s fields `unmapped_path` (introduced by #44940) and `name_was_remapped` (introduced by #41508 when `--remap-path-prefix` feature originally added) are removed, as these two pieces of information can be inferred from the `name` field: if it's anything other than a `FileName::Real(_)`, or if it is a `FileName::Real(RealFileName::LocalPath(_))`, then clearly `name_was_remapped` would've been false and `unmapped_path` would've been `None`. If it is a `FileName::Real(RealFileName::Remapped{local_path, virtual_name})`, then `name_was_remapped` would've been true and `unmapped_path` would've been `Some(local_path)`.
cc `@eddyb` who implemented `/rustc/...` path devirtualisation
This commit implements both the native linking modifiers infrastructure
as well as an initial attempt at the individual modifiers from the RFC.
It also introduces a feature flag for the general syntax along with
individual feature flags for each modifier.
Implement RFC 1260 with feature_name `imported_main`.
This is the second extraction part of #84062 plus additional adjustments.
This (mostly) implements RFC 1260.
However there's still one test case failure in the extern crate case. Maybe `LocalDefId` doesn't work here? I'm not sure.
cc https://github.com/rust-lang/rust/issues/28937
r? `@petrochenkov`
Add TRACKED_NO_CRATE_HASH and use it for `--remap-path-prefix`
I verified locally that this fixes https://github.com/rust-lang/rust/issues/66955.
r? `@Aaron1011` (feel free to reassign)
This is necessary for options that should invalidate the incremental
hash but *not* affect the crate hash (e.g. --remap-path-prefix).
This doesn't add `for_crate_hash` to the trait directly because it's not
relevant for *types*, only for *options*, which are fields on a larger
struct. Instead, it adds a new `SUBSTRUCT` directive for options, which
does take a `for_crate_hash` parameter.
- Use TRACKED_NO_CRATE_HASH for --remap-path-prefix
- Add test that `remap_path_prefix` is tracked
- Reduce duplication in the test suite to avoid future churn
Find codegen backends in more locations
* Search in the sysroot passed using `--sysroot` in addition to the default sysroot.
* Search for `librustc_codegen_$name.so` in addition to `librustc_codegen_$name-$release.so`.
This combined would allow putting `librustc_codegen_cranelift.so` in the right location of a sysroot passed using `--sysroot`.
Add an unstable --json=unused-externs flag to print unused externs
This adds an unstable flag to print a list of the extern names not used by cargo.
This PR will enable cargo to collect unused dependencies from all units and provide warnings.
The companion PR to cargo is: https://github.com/rust-lang/cargo/pull/8437
The goal is eventual stabilization of this flag in rustc as well as in cargo.
Discussion of this feature is mostly contained inside these threads: #57274#72342#72603
The feature builds upon the internal datastructures added by #72342
Externs are uniquely identified by name and the information is sufficient for cargo.
If the mode is enabled, rustc will print json messages like:
```
{"unused_extern_names":["byteorder","openssl","webpki"]}
```
For a crate that got passed byteorder, openssl and webpki dependencies but needed none of them.
### Q: Why not pass -Wunused-crate-dependencies?
A: See [ehuss's comment here](https://github.com/rust-lang/rust/issues/57274#issuecomment-624839355)
TLDR: it's cleaner. Rust's warning system wasn't built to be filtered or edited by cargo.
Even a basic implementation of the feature would have to change the "n warnings emitted" line that rustc prints at the end.
Cargo ideally wants to synthesize its own warnings anyways. For example, it would be hard for rustc to emit warnings like
"dependency foo is only used by dev targets", suggesting to make it a dev-dependency instead.
### Q: Make rustc emit used or unused externs?
A: Emitting used externs has the advantage that it simplifies cargo's collection job.
However, emitting unused externs creates less data to be communicated between rustc and cargo.
Often you want to paste a cargo command obtained from `cargo build -vv` for doing something
completely unrelated. The message is emitted always, even if no warning or error is emitted.
At that point, even this tiny difference in "noise" matters. That's why I went with emitting unused externs.
### Q: One json msg per extern or a collective json msg?
A: Same as above, the data format should be concise. Having 30 lines for the 30 crates a crate uses would be disturbing to readers.
Also it helps the cargo implementation to know that there aren't more unused deps coming.
### Q: Why use names of externs instead of e.g. paths?
A: Names are both sufficient as well as neccessary to uniquely identify a passed `--extern` arg.
Names are sufficient because you *must* pass a name when passing an `--extern` arg.
Passing a path is optional on the other hand so rustc might also figure out a crate's location from the file system.
You can also put multiple paths for the same extern name, via e.g. `--extern hello=/usr/lib/hello.rmeta --extern hello=/usr/local/lib/hello.rmeta`,
but rustc will only ever use one of those paths.
Also, paths don't identify a dependency uniquely as it is possible to have multiple different extern names point to the same path.
So paths are ill-suited for identification.
### Q: What about 2015 edition crates?
A: They are fully supported.
Even on the 2015 edition, an explicit `--extern` flag is is required to enable `extern crate foo;` to work (outside of sysroot crates, which this flag doesn't warn about anyways).
So the lint would still fire on 2015 edition crates if you haven't included a dependency specified in Cargo.toml using `extern crate foo;` or similar.
The lint won't fire if your sole use in the crate is through a `extern crate foo;` statement, but that's not its job.
For detecting unused `extern crate foo` statements, there is the `unused_extern_crates` lint
which can be enabled by `#![warn(unused_extern_crates)]` or similar.
cc ```@jsgf``` ```@ehuss``` ```@petrochenkov``` ```@estebank```
Don't duplicate the extern providers once for each crate
This should give a small perf improvement for small crates by avoiding a memcpy of a pretty big struct for each loaded crate. In addition would be useful for replacing the sequential `CrateNum` everywhere with the hash based `StableCrateId` introduced in #81635, which would allow avoiding remapping of `CrateNum`'s when loading crate metadata. While this PR is not strictly needed for that, it is necessary to prevent a performance loss due to it.
I think this duplication was done in https://github.com/rust-lang/rust/pull/40008 (which introduced the query system) to make it possible to compile multiple crates in a single session in the future. I think this is unlikely to be implemented any time soon. In addition this PR can easily be reverted if necessary to implement this.
- Add back `HirIdVec`, with a comment that it will soon be used.
- Add back `*_region` functions, with a comment they may soon be used.
- Remove `-Z borrowck_stats` completely. It didn't do anything.
- Remove `make_nop` completely.
- Add back `current_loc`, which is used by an out-of-tree tool.
- Fix style nits
- Remove `AtomicCell` with `cfg(parallel_compiler)` for consistency.
coverage bug fixes and optimization support
Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to
address multiple, somewhat related issues.
Fixed a significant flaw in prior coverage solution: Every counter
generated a new counter variable, but there should have only been one
counter variable per function. This appears to have bloated .profraw
files significantly. (For a small program, it increased the size by
about 40%. I have not tested large programs, but there is anecdotal
evidence that profraw files were way too large. This is a good fix,
regardless, but hopefully it also addresses related issues.
Fixes: #82144
Invalid LLVM coverage data produced when compiled with -C opt-level=1
Existing tests now work up to at least `opt-level=3`. This required a
detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR
when compiled with coverage, and a lot of trial and error with codegen
adjustments.
The biggest hurdle was figuring out how to continue to support coverage
results for unused functions and generics. Rust's coverage results have
three advantages over Clang's coverage results:
1. Rust's coverage map does not include any overlapping code regions,
making coverage counting unambiguous.
2. Rust generates coverage results (showing zero counts) for all unused
functions, including generics. (Clang does not generate coverage for
uninstantiated template functions.)
3. Rust's unused functions produce minimal stubbed functions in LLVM IR,
sufficient for including in the coverage results; while Clang must
generate the complete LLVM IR for each unused function, even though
it will never be called.
This PR removes the previous hack of attempting to inject coverage into
some other existing function instance, and generates dedicated instances
for each unused function. This change, and a few other adjustments
(similar to what is required for `-C link-dead-code`, but with lower
impact), makes it possible to support LLVM optimizations.
Fixes: #79651
Coverage report: "Unexecuted instantiation:..." for a generic function
from multiple crates
Fixed by removing the aforementioned hack. Some "Unexecuted
instantiation" notices are unavoidable, as explained in the
`used_crate.rs` test, but `-Zinstrument-coverage` has new options to
back off support for either unused generics, or all unused functions,
which avoids the notice, at the cost of less coverage of unused
functions.
Fixes: #82875
Invalid LLVM coverage data produced with crate brotli_decompressor
Fixed by disabling the LLVM function attribute that forces inlining, if
`-Z instrument-coverage` is enabled. This attribute is applied to
Rust functions with `#[inline(always)], and in some cases, the forced
inlining breaks coverage instrumentation and reports.
FYI: `@wesleywiser`
r? `@tmandry`
Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to
address multiple, somewhat related issues.
Fixed a significant flaw in prior coverage solution: Every counter
generated a new counter variable, but there should have only been one
counter variable per function. This appears to have bloated .profraw
files significantly. (For a small program, it increased the size by
about 40%. I have not tested large programs, but there is anecdotal
evidence that profraw files were way too large. This is a good fix,
regardless, but hopefully it also addresses related issues.
Fixes: #82144
Invalid LLVM coverage data produced when compiled with -C opt-level=1
Existing tests now work up to at least `opt-level=3`. This required a
detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR
when compiled with coverage, and a lot of trial and error with codegen
adjustments.
The biggest hurdle was figuring out how to continue to support coverage
results for unused functions and generics. Rust's coverage results have
three advantages over Clang's coverage results:
1. Rust's coverage map does not include any overlapping code regions,
making coverage counting unambiguous.
2. Rust generates coverage results (showing zero counts) for all unused
functions, including generics. (Clang does not generate coverage for
uninstantiated template functions.)
3. Rust's unused functions produce minimal stubbed functions in LLVM IR,
sufficient for including in the coverage results; while Clang must
generate the complete LLVM IR for each unused function, even though
it will never be called.
This PR removes the previous hack of attempting to inject coverage into
some other existing function instance, and generates dedicated instances
for each unused function. This change, and a few other adjustments
(similar to what is required for `-C link-dead-code`, but with lower
impact), makes it possible to support LLVM optimizations.
Fixes: #79651
Coverage report: "Unexecuted instantiation:..." for a generic function
from multiple crates
Fixed by removing the aforementioned hack. Some "Unexecuted
instantiation" notices are unavoidable, as explained in the
`used_crate.rs` test, but `-Zinstrument-coverage` has new options to
back off support for either unused generics, or all unused functions,
which avoids the notice, at the cost of less coverage of unused
functions.
Fixes: #82875
Invalid LLVM coverage data produced with crate brotli_decompressor
Fixed by disabling the LLVM function attribute that forces inlining, if
`-Z instrument-coverage` is enabled. This attribute is applied to
Rust functions with `#[inline(always)], and in some cases, the forced
inlining breaks coverage instrumentation and reports.
Update to rustc-rayon 0.3.1
This pulls in rust-lang/rustc-rayon#8 to fix#81425. (h/t `@ammaraskar)`
That revealed weak constraints on `rustc_arena::DropArena`, because its
`DropType` was holding type-erased raw pointers to generic `T`. We can
implement `Send` for `DropType` (under `cfg(parallel_compiler)`) by
requiring all `T: Send` before they're type-erased.
This pulls in rust-lang/rustc-rayon#8 to fix#81425. (h/t @ammaraskar)
That revealed weak constraints on `rustc_arena::DropArena`, because its
`DropType` was holding type-erased raw pointers to generic `T`. We can
implement `Send` for `DropType` (under `cfg(parallel_compiler)`) by
requiring all `T: Send` before they're type-erased.
Remove the -Zinsert-sideeffect
This removes all of the code we had in place to work-around LLVM's
handling of forward progress. From this removal excluded is a workaround
where we'd insert a `sideeffect` into clearly infinite loops such as
`loop {}`. This code remains conditionally effective when the LLVM
version is earlier than 12.0, which fixed the forward progress related
miscompilations at their root.
This removes all of the code we had in place to work-around LLVM's
handling of forward progress. From this removal excluded is a workaround
where we'd insert a `sideeffect` into clearly infinite loops such as
`loop {}`. This code remains conditionally effective when the LLVM
version is earlier than 12.0, which fixed the forward progress related
miscompilations at their root.
expand: Refactor module loading
This is an accompanying PR to https://github.com/rust-lang/rust/pull/82399, but they can be landed independently.
See individual commits for more details.
Anyone should be able to review this equally well because all people actually familiar with this code left the project.
bypass auto_da_alloc for metadata files
This saves about 0.7% when rerunning the UI test suite. I.e. when the metadata files exist and will be overwritten. No improvements expected for a clean build. So it might show up in incr-patched perf results.
```
regular rename:
Benchmark #1: touch src/tools/compiletest/src/main.rs ; RUSTC_WRAPPER="" schedtool -B -e ./x.py test src/test/ui
Time (mean ± σ): 47.305 s ± 0.170 s [User: 1631.540 s, System: 412.648 s]
Range (min … max): 47.125 s … 47.856 s 20 runs
non-durable rename:
Benchmark #1: touch src/tools/compiletest/src/main.rs ; RUSTC_WRAPPER="" schedtool -B -e ./x.py test src/test/ui
Time (mean ± σ): 46.930 s ± 0.064 s [User: 1634.344 s, System: 396.038 s]
Range (min … max): 46.759 s … 47.043 s 20 runs
```
There are more places that trigger auto_da_alloc behavior by overwriting existing files with O_TRUNC, but those are much harder to locate because `O_TRUNC` is set on `open()` but the writeback is triggered on `close()`. The latter is the part which shows up in profiles.
Cleanup `PpMode` and friends
This PR:
- Separates `PpSourceMode` and `PpHirMode` to remove invalid states
- Renames the variant to remove the redundant `Ppm` prefix
- Adds basic documentation for the different pretty-print modes
- Cleanups some code to make it more idiomatic
Not sure if this is actually useful, but it looks cleaner to me.
Make `treat_err_as_bug` Option<NonZeroUsize>
`rustc -Z treat-err-as-bug=N` already requires `N` to be nonzero when the argument is parsed, so changing the type from `Option<usize>` to `Option<NonZeroUsize>` is a low-hanging fruit in terms of layout optimization.
* Search in the sysroot passed using `--sysroot` in addition to the
default sysroot.
* Search for `librustc_codegen_$name.so` in addition to
`librustc_codegen_$name-$release.so`.
cfg(version): treat nightlies as complete
This PR makes cfg(version) treat the nightlies
for version 1.n.0 as 1.n.0, even though that nightly
version might not have all stabilizations and features
of the released 1.n.0. This is done for greater
convenience for people who want to test a newly
stabilized feature on nightly, or in other words,
give newly stabilized features as many eyeballs
as possible.
For users who wish to pin nightlies, this commit adds
a -Z assume-incomplete-release option that they can
enable if they run into any issues due to this change.
Implements the suggestion in https://github.com/rust-lang/rust/issues/64796#issuecomment-640851454
This commit makes cfg(version) treat the nightlies
for version 1.n.0 as 1.n.0, even though that nightly
version might not have all stabilizations and features
of the released 1.n.0. This is done for greater
convenience for people who want to test a newly
stabilized feature on nightly.
For users who wish to pin nightlies, this commit adds
a -Z assume-incomplete-release option that they can
enable if there are any issues due to this change.
rustc: Stabilize `-Zrun-dsymutil` as `-Csplit-debuginfo`
This commit adds a new stable codegen option to rustc,
`-Csplit-debuginfo`. The old `-Zrun-dsymutil` flag is deleted and now
subsumed by this stable flag. Additionally `-Zsplit-dwarf` is also
subsumed by this flag but still requires `-Zunstable-options` to
actually activate. The `-Csplit-debuginfo` flag takes one of
three values:
* `off` - This indicates that split-debuginfo from the final artifact is
not desired. This is not supported on Windows and is the default on
Unix platforms except macOS. On macOS this means that `dsymutil` is
not executed.
* `packed` - This means that debuginfo is desired in one location
separate from the main executable. This is the default on Windows
(`*.pdb`) and macOS (`*.dSYM`). On other Unix platforms this subsumes
`-Zsplit-dwarf=single` and produces a `*.dwp` file.
* `unpacked` - This means that debuginfo will be roughly equivalent to
object files, meaning that it's throughout the build directory
rather than in one location (often the fastest for local development).
This is not the default on any platform and is not supported on Windows.
Each target can indicate its own default preference for how debuginfo is
handled. Almost all platforms default to `off` except for Windows and
macOS which default to `packed` for historical reasons.
Some equivalencies for previous unstable flags with the new flags are:
* `-Zrun-dsymutil=yes` -> `-Csplit-debuginfo=packed`
* `-Zrun-dsymutil=no` -> `-Csplit-debuginfo=unpacked`
* `-Zsplit-dwarf=single` -> `-Csplit-debuginfo=packed`
* `-Zsplit-dwarf=split` -> `-Csplit-debuginfo=unpacked`
Note that `-Csplit-debuginfo` still requires `-Zunstable-options` for
non-macOS platforms since split-dwarf support was *just* implemented in
rustc.
There's some more rationale listed on #79361, but the main gist of the
motivation for this commit is that `dsymutil` can take quite a long time
to execute in debug builds and provides little benefit. This means that
incremental compile times appear that much worse on macOS because the
compiler is constantly running `dsymutil` over every single binary it
produces during `cargo build` (even build scripts!). Ideally rustc would
switch to not running `dsymutil` by default, but that's a problem left
to get tackled another day.
Closes#79361
This commit adds a new stable codegen option to rustc,
`-Csplit-debuginfo`. The old `-Zrun-dsymutil` flag is deleted and now
subsumed by this stable flag. Additionally `-Zsplit-dwarf` is also
subsumed by this flag but still requires `-Zunstable-options` to
actually activate. The `-Csplit-debuginfo` flag takes one of
three values:
* `off` - This indicates that split-debuginfo from the final artifact is
not desired. This is not supported on Windows and is the default on
Unix platforms except macOS. On macOS this means that `dsymutil` is
not executed.
* `packed` - This means that debuginfo is desired in one location
separate from the main executable. This is the default on Windows
(`*.pdb`) and macOS (`*.dSYM`). On other Unix platforms this subsumes
`-Zsplit-dwarf=single` and produces a `*.dwp` file.
* `unpacked` - This means that debuginfo will be roughly equivalent to
object files, meaning that it's throughout the build directory
rather than in one location (often the fastest for local development).
This is not the default on any platform and is not supported on Windows.
Each target can indicate its own default preference for how debuginfo is
handled. Almost all platforms default to `off` except for Windows and
macOS which default to `packed` for historical reasons.
Some equivalencies for previous unstable flags with the new flags are:
* `-Zrun-dsymutil=yes` -> `-Csplit-debuginfo=packed`
* `-Zrun-dsymutil=no` -> `-Csplit-debuginfo=unpacked`
* `-Zsplit-dwarf=single` -> `-Csplit-debuginfo=packed`
* `-Zsplit-dwarf=split` -> `-Csplit-debuginfo=unpacked`
Note that `-Csplit-debuginfo` still requires `-Zunstable-options` for
non-macOS platforms since split-dwarf support was *just* implemented in
rustc.
There's some more rationale listed on #79361, but the main gist of the
motivation for this commit is that `dsymutil` can take quite a long time
to execute in debug builds and provides little benefit. This means that
incremental compile times appear that much worse on macOS because the
compiler is constantly running `dsymutil` over every single binary it
produces during `cargo build` (even build scripts!). Ideally rustc would
switch to not running `dsymutil` by default, but that's a problem left
to get tackled another day.
Closes#79361
Make `-Z time-passes` less noisy
- Add the module name to `pre_AST_expansion_passes` and don't make it a
verbose event (since it normally doesn't take very long, and it's
emitted many times)
- Don't make the following rustdoc events verbose; they're emitted many times.
+ build_extern_trait_impl
+ build_local_trait_impl
+ build_primitive_trait_impl
+ get_auto_trait_impls
+ get_blanket_trait_impls
- Remove the `get_auto_trait_and_blanket_synthetic_impls` rustdoc event; it's wholly
covered by get_{auto,blanket}_trait_impls and not very useful.
I found this while working on https://github.com/rust-lang/rust/pull/81275 but it's independent of those changes.
- Add the module name to `pre_AST_expansion_passes` and don't make it a
verbose event (since it normally doesn't take very long, and it's
emitted many times)
- Don't make the following rustdoc events verbose; they're emitted many times.
+ build_extern_trait_impl
+ build_local_trait_impl
+ build_primitive_trait_impl
+ get_auto_trait_impls
+ get_blanket_trait_impls
- Remove `get_auto_trait_and_blanket_synthetic_impls`; it's wholly
covered by get_{auto,blanket}_trait_impls and not very useful.
This avoids each tool having to separately find and call
`self_profile_alloc_strings`.
- Don't compute the global context if it hasn't yet been computed
This avoids giving extraneous errors about unresolved names if an error
occurs during parsing.
Remove much of the special-case handling around crate metadata
dependency tracking by replacing `DepKind::CrateMetadata` and the
pre-allocation of corresponding `DepNodes` with on-demand invocation
of the `crate_hash` query.
resolve: Simplify built-in macro table
We don't use full `SyntaxExtension`s from the table, only `SyntaxExtensionKind`s, and `Ident` in `register_builtin_macro` always had dummy span. This PR removes unnecessary data from the table and related function signatures.
Noticed when reviewing #80850.
Adds checks for:
* `no_core` attribute
* explicitly-enabled `legacy` symbol mangling
* mir_opt_level > 1 (which enables inlining)
I removed code from the `Inline` MIR pass that forcibly disabled
inlining if `-Zinstrument-coverage` was set. The default `mir_opt_level`
does not enable inlining anyway. But if the level is explicitly set and
is greater than 1, I issue a warning.
The new warnings show up in tests, which is much better for diagnosing
potential option conflicts in these cases.
Fix `unknown-crate` when using -Z self-profile with rustdoc
... by removing a duplicate `crate_name` field in `interface::Config`,
making it clear that rustdoc should be passing it to `config::Options` instead.
Unblocks https://github.com/rust-lang/rustc-perf/issues/797.
Implement lazy decoding of DefPathTable during incremental compilation
PR https://github.com/rust-lang/rust/pull/75813 implemented lazy decoding of the `DefPathTable` from crate metadata. However, it requires decoding the entire `DefPathTable` when incremental compilation is active, so that we can map a decoded `DefPathHash` to a `DefId` from an arbitrary crate.
This PR adds support for lazy decoding of dependency `DefPathTable`s when incremental compilation si active.
When we load the incremental cache and dep
graph, we need the ability to map a `DefPathHash` to a `DefId` in the
current compilation session (if the corresponding definition still
exists).
This is accomplished by storing the old `DefId` (that is, the `DefId`
from the previous compilation session) for each `DefPathHash` we need to
remap. Since a `DefPathHash` includes the owning crate, the old crate is
guaranteed to be the right one (if the definition still exists). We then
use the old `DefIndex` as an initial guess, which we validate by
comparing the expected and actual `DefPathHash`es. In most cases,
foreign crates will be completely unchanged, which means that we our
guess will be correct. If our guess is wrong, we fall back to decoding
the entire `DefPathTable` for the foreign crate. This still represents
an improvement over the status quo, since we can skip decoding the
entire `DefPathTable` for other crates (where all of our guesses were
correct).
Properly handle attributes on statements
We now collect tokens for the underlying node wrapped by `StmtKind`
nstead of storing tokens directly in `Stmt`.
`LazyTokenStream` now supports capturing a trailing semicolon after it
is initially constructed. This allows us to avoid refactoring statement
parsing to wrap the parsing of the semicolon in `parse_tokens`.
Attributes on item statements
(e.g. `fn foo() { #[bar] struct MyStruct; }`) are now treated as
item attributes, not statement attributes, which is consistent with how
we handle attributes on other kinds of statements. The feature-gating
code is adjusted so that proc-macro attributes are still allowed on item
statements on stable.
Two built-in macros (`#[global_allocator]` and `#[test]`) needed to be
adjusted to support being passed `Annotatable::Stmt`.
We now collect tokens for the underlying node wrapped by `StmtKind`
instead of storing tokens directly in `Stmt`.
`LazyTokenStream` now supports capturing a trailing semicolon after it
is initially constructed. This allows us to avoid refactoring statement
parsing to wrap the parsing of the semicolon in `parse_tokens`.
Attributes on item statements
(e.g. `fn foo() { #[bar] struct MyStruct; }`) are now treated as
item attributes, not statement attributes, which is consistent with how
we handle attributes on other kinds of statements. The feature-gating
code is adjusted so that proc-macro attributes are still allowed on item
statements on stable.
Two built-in macros (`#[global_allocator]` and `#[test]`) needed to be
adjusted to support being passed `Annotatable::Stmt`.
Always print lints from plugins, if they're available
Currently you can get a list of lints and lint groups by running `rustc
-Whelp`. This prints an additional line at the end:
```
Compiler plugins can provide additional lints and lint groups. To see a listing of these, re-run `rustc -W help` with a crate filename.
```
Clippy is such a "compiler plugin", that provides additional lints.
Running `clippy-driver -Whelp` (`rustc` wrapper) still only prints the
rustc lints with the above message at the end. But when running
`clippy-driver -Whelp main.rs`, where `main.rs` is any rust file, it
also prints Clippy lints. I don't think this is a good approach from a
UX perspective: Why is a random file necessary to print a help message?
This PR changes this behavior: Whenever a compiler callback
registers lints, it is assumed that these lints come from a plugin and
are printed without having to specify a Rust source file.
Fixesrust-lang/rust-clippy#6122
cc `@Manishearth` `@ebroto` for the Clippy changes.
Move lev_distance to rustc_ast, make non-generic
rustc_ast currently has a few dependencies on rustc_lexer. Ideally, an AST
would not have any dependency its lexer, for minimizing
design-time dependencies. Breaking this dependency would also have practical
benefits, since modifying rustc_lexer would not trigger a rebuild of rustc_ast.
This commit does not remove the rustc_ast --> rustc_lexer dependency,
but it does remove one of the sources of this dependency, which is the
code that handles fuzzy matching between symbol names for making suggestions
in diagnostics. Since that code depends only on Symbol, it is easy to move
it to rustc_span. It might even be best to move it to a separate crate,
since other tools such as Cargo use the same algorithm, and have simply
contain a duplicate of the code.
This changes the signature of find_best_match_for_name so that it is no
longer generic over its input. I checked the optimized binaries, and this
function was duplicated for nearly every call site, because most call sites
used short-lived iterator chains, generic over Map and such. But there's
no good reason for a function like this to be generic, since all it does
is immediately convert the generic input (the Iterator impl) to a concrete
Vec<Symbol>. This has all of the costs of generics (duplicated method bodies)
with no benefit.
Changing find_best_match_for_name to be non-generic removed about 10KB of
code from the optimized binary. I know it's a drop in the bucket, but we have
to start reducing binary size, and beginning to tame over-use of generics
is part of that.
Validate use of parameters in naked functions
* Reject use of parameters inside naked function body.
* Reject use of patterns inside function parameters, to emphasize role
of parameters a signature declaration (mirroring existing behaviour
for function declarations) and avoid generating code introducing
specified bindings.
Closes issues below by considering input to be ill-formed.
Closes#75922.
Closes#77848.
Closes#79350.
rustc_ast currently has a few dependencies on rustc_lexer. Ideally, an AST
would not have any dependency its lexer, for minimizing unnecessarily
design-time dependencies. Breaking this dependency would also have practical
benefits, since modifying rustc_lexer would not trigger a rebuild of rustc_ast.
This commit does not remove the rustc_ast --> rustc_lexer dependency,
but it does remove one of the sources of this dependency, which is the
code that handles fuzzy matching between symbol names for making suggestions
in diagnostics. Since that code depends only on Symbol, it is easy to move
it to rustc_span. It might even be best to move it to a separate crate,
since other tools such as Cargo use the same algorithm, and have simply
contain a duplicate of the code.
This changes the signature of find_best_match_for_name so that it is no
longer generic over its input. I checked the optimized binaries, and this
function was duplicated at nearly every call site, because most call sites
used short-lived iterator chains, generic over Map and such. But there's
no good reason for a function like this to be generic, since all it does
is immediately convert the generic input (the Iterator impl) to a concrete
Vec<Symbol>. This has all of the costs of generics (duplicated method bodies)
with no benefit.
Changing find_best_match_for_name to be non-generic removed about 10KB of
code from the optimized binary. I know it's a drop in the bucket, but we have
to start reducing binary size, and beginning to tame over-use of generics
is part of that.
* Reject use of parameters inside naked function body.
* Reject use of patterns inside function parameters, to emphasize role
of parameters a signature declaration (mirroring existing behaviour
for function declarations) and avoid generating code introducing
specified bindings.
Allow disabling TrapUnreachable via -Ztrap-unreachable=no
Currently this is only possible by defining a custom target, which is quite unwieldy.
This is useful for embedded targets where small code size is desired. For example, on my project (thumbv7em-none-eabi) this yields a 0.6% code size reduction: 132892 bytes -> 132122 bytes (770 bytes down).
This is useful for embedded targets where small code size is desired.
For example, on my project (thumbv7em-none-eabi) this yields a 0.6% code size reduction.
Change `-Z fewer-names` into an optional boolean flag and allow using it
to either discard value names when true or retain them when false,
regardless of other settings.
Simplify output capturing
This is a sequence of incremental improvements to the unstable/internal `set_panic` and `set_print` mechanism used by the `test` crate:
1. Remove the `LocalOutput` trait and use `Arc<Mutex<dyn Write>>` instead of `Box<dyn LocalOutput>`. In practice, all implementations of `LocalOutput` were just `Arc<Mutex<..>>`. This simplifies some logic and removes all custom `Sink` implementations such as `library/test/src/helpers/sink.rs`. Also removes a layer of indirection, as the outermost `Box` is now gone. It also means that locking now happens per `write_fmt`, not per individual `write` within. (So `"{} {}\n"` now results in one `lock()`, not four or more.)
2. Since in all cases the `dyn Write`s were just `Vec<u8>`s, replace the type with `Arc<Mutex<Vec<u8>>>`. This simplifies things more, as error handling and flushing can be removed now. This also removes the hack needed in the default panic handler to make this work with `::realstd`, as (unlike `Write`) `Vec<u8>` is from `alloc`, not `std`.
3. Replace the `RefCell`s by regular `Cell`s. The `RefCell`s were mostly used as `mem::replace(&mut *cell.borrow_mut(), something)`, which is just `Cell::replace`. This removes an unecessary bookkeeping and makes the code a bit easier to read.
4. Merge `set_panic` and `set_print` into a single `set_output_capture`. Neither the test crate nor rustc (the only users of this feature) have a use for using these separately. Merging them simplifies things even more. This uses a new function name and feature name, to make it clearer this is internal and not supposed to be used by other crates.
Might be easier to review per commit.
It was only ever used with Vec<u8> anyway. This simplifies some things.
- It no longer needs to be flushed, because that's a no-op anyway for
a Vec<u8>.
- Writing to a Vec<u8> never fails.
- No #[cfg(test)] code is needed anymore to use `realstd` instead of
`std`, because Vec comes from alloc, not std (like Write).
* `-Zinline-mir-threshold` to change the default threshold.
* `-Zinline-mir-hint-threshold` to change the threshold used by
functions with inline hint.
rustc_ast: Do not panic by default when visiting macro calls
Panicking by default made sense when we didn't have HIR or MIR and everything worked on AST, but now all AST visitors run early and majority of them have to deal with macro calls, often by ignoring them.
The second commit renames `visit_mac` to `visit_mac_call`, the corresponding structures were renamed earlier in https://github.com/rust-lang/rust/pull/69589.
Do not remove tokens before AST json serialization
`TokenStripper` is error-prone and introduces one more use of `MutVisitor`.
It's much simpler to treat serialization as just one more place that wants lazy token stream to turn into a real token stream.
Also, no code is better than more code, in general.
r? @Aaron1011
(I also merged tests for `TokenStripper` ICEs into one.)
Implement -Z relax-elf-relocations=yes|no
This lets rustc users tweak whether the linker should relax ELF relocations without recompiling a whole new target with its own libcore etc.
Implement rustc side of report-future-incompat
cc https://github.com/rust-lang/rust/issues/71249
This is an alternative to `@pnkfelix's` initial implementation in https://github.com/pnkfelix/rust/commits/prototype-rustc-side-of-report-future-incompat (mainly because I started working before seeing that branch 😄 ).
My approach outputs the entire original `Diagnostic`, in a way that is compatible with incremental compilation. This is not yet integrated with compiletest, but can be used manually by passing `-Z emit-future-incompat-report` to `rustc`.
Several changes are made to support this feature:
* The `librustc_session/lint` module is moved to a new crate `librustc_lint_defs` (name bikesheddable). This allows accessing lint definitions from `librustc_errors`.
* The `Lint` struct is extended with an `Option<FutureBreakage>`. When present, it indicates that we should display a lint in the future-compat report. `FutureBreakage` contains additional information that we may want to display in the report (currently, a `date` field indicating when the crate will stop compiling).
* A new variant `rustc_error::Level::Allow` is added. This is used when constructing a diagnostic for a future-breakage lint that is marked as allowed (via `#[allow]` or `--cap-lints`). This allows us to capture any future-breakage diagnostics in one place, while still discarding them before they are passed to the `Emitter`.
* `DiagnosticId::Lint` is extended with a `has_future_breakage` field, indicating whether or not the `Lint` has future breakage information (and should therefore show up in the report).
* `Session` is given access to the `LintStore` via a new `SessionLintStore` trait (since `librustc_session` cannot directly reference `LintStore` without a cyclic dependency). We use this to turn a string `DiagnosticId::Lint` back into a `Lint`, to retrieve the `FutureBreakage` data.
Currently, `FutureBreakage.date` is always set to `None`. However, this could potentially be interpreted by Cargo in the future.
I've enabled the future-breakage report for the `ARRAY_INTO_ITER` lint, which can be used to test out this PR. The intent is to use the field to allow Cargo to determine the date of future breakage (as described in [RFC 2834](https://github.com/rust-lang/rfcs/blob/master/text/2834-cargo-report-future-incompat.md)) without needing to parse the diagnostic itself.
cc `@pnkfelix`
