This moves the range_minus_one lint to the pedantic category, so there
will not be any warnings emitted by default. This should work around
problems where the suggestion is impossible to resolve due to the range
consumer only accepting a specific range implementation, rather than the
`RangeBounds` trait (see #3307).
While it is possible to work around this by extracting the boundary into
a variable, I don't think clippy should encourage people to disable or
work around lints, but instead the lints should be fixable. So hopefully
this will help until a proper implementation checks what the range is
used for.
single_match_else - single expr/stmt else block corner case
One approach to fix#3489.
See discussion in the issue.
changelog: single_match_else - single expr/stmt else block corner case fix
Rollup of 14 pull requests
Successful merges:
- #70563 ([rustdoc] Page hash handling)
- #73856 (Edit librustc_lexer top-level docs)
- #73870 (typeck: adding type information to projection)
- #73953 (Audit hidden/short code suggestions)
- #73962 (libstd/net/tcp.rs: #![deny(unsafe_op_in_unsafe_fn)])
- #73969 (mir: mark mir construction temporaries as internal)
- #73974 (Move A|Rc::as_ptr from feature(weak_into_raw) to feature(rc_as_ptr))
- #74067 (rustdoc: Restore underline text decoration on hover for FQN in header)
- #74074 (Fix the return type of Windows' `OpenOptionsExt::security_qos_flags`.)
- #74078 (Always resolve type@primitive as a primitive, not a module)
- #74089 (Add rust-analyzer to the build manifest)
- #74090 (Remove unused RUSTC_DEBUG_ASSERTIONS)
- #74102 (Fix const prop ICE)
- #74112 (Expand abbreviation in core::ffi description)
Failed merges:
r? @ghost
typeck: adding type information to projection
This commit modifies the Place as follow:
* remove 'ty' from ProjectionKind
* add type information into to Projection
* replace 'ty' in Place with 'base_ty'
* introduce 'ty()' in `Place` to return the final type of the `Place`
* introduce `ty_before_projection()` in `Place` to return the type of
a `Place` before i'th projection is applied
Closes https://github.com/rust-lang/project-rfc-2229/issues/5
Added restriction lint: pattern-type-mismatch
changelog: Added a new restriction lint `pattern-type-mismatch`. This lint is especially helpful for beginners learning about the magic behind pattern matching. (This explanation might be worth to include in the next changelog.)
This commit modifies the Place as follow:
* remove 'ty' from ProjectionKind
* add type information into to Projection
* replace 'ty' in Place with 'base_ty'
* introduce 'ty()' in `Place` to return the final type of the `Place`
* introduce `ty_before_projection()` in `Place` to return the type of
a `Place` before i'th projection is applied
Closes https://github.com/rust-lang/project-rfc-2229/issues/5
Rollup of 13 pull requests
Successful merges:
- #72620 (Omit DW_AT_linkage_name when it is the same as DW_AT_name)
- #72967 (Don't move cursor in search box when using arrows to navigate results)
- #73102 (proc_macro: Stop flattening groups with dummy spans)
- #73297 (Support configurable deny-warnings for all in-tree crates.)
- #73507 (Cleanup MinGW LLVM linkage workaround)
- #73588 (Fix handling of reserved registers for ARM inline asm)
- #73597 (Record span of `const` kw in GenericParamKind)
- #73629 (Make AssocOp Copy)
- #73681 (Update Chalk to 0.14)
- #73707 (Fix links in `SliceIndex` documentation)
- #73719 (emitter: column width defaults to 140)
- #73729 (disable collectionbenches for android)
- #73748 (Add code block to code in documentation of `List::rebase_onto`)
Failed merges:
r? @ghost
Record span of `const` kw in GenericParamKind
Context: this is needed for a fix of https://github.com/rust-lang/rustfmt/issues/4263,
which currently records the span of a const generic param incorrectly
because the location of the `const` kw is not known.
I am not sure how to add tests for this; any guidance in how to do so
would be appreciated 🙂
cmp_owned: handle when PartialEq is not implemented symmetrically
changelog: Handle asymmetrical implementations of PartialEq in [`cmp_owned`].
Fixes#4874
clone_on_copy - add machine applicability
Fix#4826.
Change the applicability of the lint clone_on_copy. Split a test file and run rustfix on the clone_on_copy part.
changelog: clone_on_copy - add machine applicability
Context: this is needed to fix https://github.com/rust-lang/rustfmt/issues/4263,
which currently records the span of a const generic param incorrectly
because the location of the `const` kw is not known.
I am not sure how to add tests for this; any guidance in how to do so
would be appreciated 🙂
#5626: lint iterator.map(|x| x)
changelog: adds a new lint for iterator.map(|x| x) (see https://github.com/rust-lang/rust-clippy/issues/5626)
The code also lints for result.map(|x| x) and option.map(|x| x). Also, I'm not sure if I'm checking for type adjustments correctly and I can't think of an example where .map(|x| x) would apply type adjustments.
Downgrade unnested_or_patterns to pedantic
Even with #5704 fixed, I don't believe it is a safe bet that if someone is using or-patterns anywhere in a codebase then they want to use it as much as possible in the whole codebase. I think it would be reasonable to reevaluate after the feature is stable. I feel that a warn-by-default lint suggesting use of an unstable feature, even if already being used in one place, is questionable.
changelog: Remove unnested_or_patterns from default set of enabled lints
The code should to check that the current expression _is_ the end
expression; not that it's equal to it. The equality check seems very
wasteful in terms of performance.
New lint: suggest `ptr::read` instead of `mem::replace(..., uninitialized())`
resolves: #5575
changelog: improvements to `MEM_REPLACE_WITH_UNINIT`:
- add a new test case in `tests/ui/repl_uninit.rs` to cover the case of replacing with `mem::MaybeUninit::uninit().assume_init()`.
- modify the existing `MEM_REPLACE_WITH_UNINIT` when replacing with `mem::uninitialized` to suggest using `ptr::read` instead.
- lint with `MEM_REPLACE_WITH_UNINIT` when replacing with `mem::MaybeUninit::uninit().assume_init()`
For the following code
```rust
let c = || bar(foo.x, foo.x)
```
We generate two different `hir::Place`s for both `foo.x`.
Handling this adds overhead for analysis we need to do for RFC 2229.
We also want to store type information at each Projection to support
analysis as part of the RFC. This resembles what we have for
`mir::Place`
This commit modifies the Place as follows:
- Rename to `PlaceWithHirId`, where there `hir_id` is that of the
expressioin.
- Move any other information that describes the access out to another
struct now called `Place`.
- Removed `Span`, it can be accessed using the [hir
API](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_middle/hir/map/struct.Map.html#method.span)
- Modify `Projection` to be a strucutre of its own, that currently only
contains the `ProjectionKind`.
Adding type information to projections wil be completed as part of https://github.com/rust-lang/project-rfc-2229/issues/5
Closes https://github.com/rust-lang/project-rfc-2229/issues/3
Co-authored-by: Aman Arora <me@aman-arora.com>
Co-authored-by: Roxane Fruytier <roxane.fruytier@hotmail.com>
Stabilize Option::zip
This PR stabilizes the following API:
```rust
impl<T> Option<T> {
pub fn zip<U>(self, other: Option<U>) -> Option<(T, U)>;
}
```
This API has real world usage as seen in <https://grep.app/search?q=-%3E%20Option%3C%5C%28T%2C%5Cs%3FU%5C%29%3E®exp=true&filter[lang][0]=Rust>.
The `zip_with` method is left unstably as this API is kinda niche
and it hasn't received much usage in Rust repositories on GitHub.
cc #70086
Clean up type alias impl trait implementation
- Removes special case for top-level impl trait
- Removes associated opaque types
- Forbid lifetime elision in let position impl trait. This is consistent with the behavior for inferred types.
- Handle lifetimes in type alias impl trait more uniformly with other parameters
cc #69323
cc #63063Closes#57188Closes#62988Closes#69136Closes#73061
let_and_return: avoid "does not live long enough" errors
EDIT: Add #3324 to the list of fixes
<details>
<summary>Description of old impl</summary>
<br>
Avoid suggesting turning the RHS expression of the last statement into the block tail expression if a temporary borrows from a local that would be destroyed before.
This is my first incursion into MIR so there's probably room for improvement!
</details>
Avoid linting if the return type of some method or function called in the last statement has a lifetime parameter.
changelog: Fix false positive in [`let_and_return`]
Fixes#3792Fixes#3324
Make `PolyTraitRef::self_ty` return `Binder<Ty>`
This came up during review of #71618. The current implementation is the same as a call to `skip_binder` but harder to audit. Make it preserve binding levels and add a call to `skip_binder` at all use sites so they can be audited as part of #72507.
Give corrected code
This PR adds corrected code for doc examples.
I did this in several commits to facilitate review.
Don't hesitate to tell me if I forgot some.
Also, sometimes I felt it was not necessary to give corrected code, but I maybe wrong.
fixes: #4829
changelog: Improve documentation examples across multiple lints.
New lint: iter_next_slice
Hello, this is a work-in-progress PR for issue: https://github.com/rust-lang/rust-clippy/issues/5572
I have implemented lint to replace `iter().next()` for `slice[index..]` and `array` with `get(index)` and `get(0)` respectively. However since I made a lot of changes, I would like to request some feedback before continuing so that I could fix mistakes.
Thank you!
---
changelog: implement `iter_next_slice` lint and test, and modify `needless_continues`, `for_loop_over_options_result` UI tests since they have `iter().next()`
Add regression test for endless loop / update `pulldown_cmark`
Closes#4917
This was fixed in pulldown_cmark 0.7.1, specifically raphlinus/pulldown-cmark#438
changelog: none
