Update rustc's information on Android's sanitizers
This patch updates sanitizer support definitions for Android inside the compiler. It also adjusts the logic to make sure no pre-built sanitizer runtime libraries are emitted as these are instead provided dynamically on Android targets.
This was previously limited to partial relro, citing issues on RHEL6,
but that's no longer a supported platform since #95026. We have long
been enabling full relro in RHEL7's own Rust builds for ppc64, without
trouble, so it should be fine to drop this workaround.
Add armv5te-none-eabi and thumbv5te-none-eabi targets
Creates two new Tier 3 targets, `armv5te-none-eabi` and `thumbv5te-none-eabi`. They are for the same target architecture (armv5te), but one defaults to the A32 instruction set and the other defaults to T32. Based on the existing `armv4t-none-eabi` and `thumbv4t-none-eabi` targets.
My particular use case for these targets is Nintendo DS homebrew, but they should be usable for any armv5te system.
Going through the Tier 3 target policy:
> A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)
That will be me.
> Targets must use naming consistent with any existing targets.
Naming is consistent with previous targets.
>> Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility.
No ambiguity here.
> Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.
Doesn't create any legal issues.
>> The target must not introduce license incompatibilities.
This doesn't introduce any new licenses.
>> Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).
Yep.
>> The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.
No new license requirements.
>> Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries.
Everything this uses is FOSS, no proprietary required.
> Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.
OK.
>> This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.
OK.
> Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.
This is a bare-metal target with only support for `core` (and `alloc`, if the user provides an allocator).
> The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.
Documentation has been added.
> Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via `@)` to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.
OK.
> Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.
OK.
> Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.
This doesn't break any other targets.
>> In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.
No unnecessary unconditional features here.
This patch updates sanitizier support definitions for Android inside the
compiler. It also adjusts the logic to make sure no pre-built sanitizer
runtime libraries are emitted as these are instead provided dynamically
on Android targets.
On later stages, the feature is already stable.
Result of running:
rg -l "feature.let_else" compiler/ src/librustdoc/ library/ | xargs sed -s -i "s#\\[feature.let_else#\\[cfg_attr\\(bootstrap, feature\\(let_else\\)#"
Fix a bunch of typo
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
Add tier-3 support for powerpc64 and riscv64 openbsd
# powerpc64
- MCP for [powerpc64-unknown-openbsd tier-3 support](https://github.com/rust-lang/compiler-team/issues/551)
- only need to add spec definition in rustc_target
# riscv64
- MCP for [riscv64-unknown-openbsd tier-3 support](https://github.com/rust-lang/compiler-team/issues/552)
- add spec definition in rustc_target
- follow freebsd about avoiding linking with `libatomic`
Set DebuginfoKind::Pdb in msvc_base
This PDB setting was added to `windows_msvc_base` in
https://github.com/rust-lang/rust/pull/98051. It's also needed for the
UEFI targets, and since `uefi_msvc_base` and `windows_msvc_base` are the
only things that inherit from `msvc_base`, just move the PDB setting up
to `mscv_base` to cover both.
Fixes https://github.com/rust-lang/rust/issues/101071
session: stabilize split debuginfo on linux
Stabilize the `-Csplit-debuginfo` flag...
- ...on Linux for all values of the flag. Split DWARF has been implemented for a few months, hasn't had any bug reports and has had some promising benchmarking for incremental debug build performance.
- ..on other platforms for the default value. It doesn't make any sense that `-Csplit-debuginfo=packed` is unstable on Windows MSVC when that's the default behaviour, but keep the other values unstable.
Because `PassMode::Cast` is by far the largest variant, but is
relatively rare.
This requires making `PassMode` not impl `Copy`, and `Clone` is no
longer necessary. This causes lots of sigil adjusting, but nothing very
notable.
Add the armv4t-none-eabi target to the supported_targets
This target was added in #100244 but forgot to add it to the macro in the `mod.rs` file.
``@Lokathor``
Revert "Revert "Allow dynamic linking for iOS/tvOS targets.""
This reverts commit 16e10bf81e (PR #77716).
The original original PR enabled `cdylib` builds for iOS. However this caused problems because:
> This new feature in Rust 1.46 added a lot of headache for iOS builds with cdylib targets. cdylib target is near impossible to build if you are using any crate with native dependencies (ex. openssl, libsodium, zmq). You can't just find .so files for all architectures to perform correct linking. Usual workflow is the following:
>
> 1. You build staticlib and rely that native dependencies will be linked as frameworks later
> 2. You setup right cocoapods in ObjectiveC/Swift wrapper.
>
> As cargo doesn't support platform-dependent crate types https://github.com/rust-lang/rust/pull/4881 as a result a lot of projects now broken on Rust 1.46
However, this will be soon a thing of the past since 1.64 brings us the long awaited much anticipated `--crate-type` flag.
> I see that this got merged recently: https://github.com/rust-lang/cargo/issues/10083. The --crate-type flag will get stabilized in 1.64. In 1.64, you could still get a successful iOS staticlib with cargo build --crate-type=statclib even if the crate has cdylib targets too. If I'm not mistaken, this solves the problem too so this PR could be reverted in 1.64 with relatively little headache.
So summing up, I think this PR can be reverted in 1.64. 🤞
Stabilize the `-Csplit-debuginfo` flag...
- ...on Linux for all values of the flag. Split DWARF has been
implemented for a few months, hasn't had any bug reports and has had
some promising benchmarking for incremental debug build performance.
- ..on other platforms for the default value. It doesn't make any sense
that `-Csplit-debuginfo=packed` is unstable on Windows MSVC when
that's the default behaviour, but keep the other values unstable.
Signed-off-by: David Wood <david.wood@huawei.com>
Pass +atomics-32 feature for {arm,thumb}v4t-none-eabi
Similar to 89582e8193, but for ARMv4t.
Pre-v6 ARM target does not have atomic CAS, except for Linux and Android where atomic CAS is provided by compiler-builtins. So, there is a similar issue as thumbv6m.
I have confirmed that enabling the `atomics-32` target feature fixes the problem in the project affected by this issue. (https://github.com/taiki-e/portable-atomic/pull/28#discussion_r946604136)
Closes#100619
r? ``@nikic``
cc ``@Lokathor``
Update to LLVM 15
For preliminary testing. Some LLVM 15 compatibility fixes were applied separately in #99512.
Release timeline:
* LLVM 15 branched on Jul 26.
* The final LLVM 15.0.0 release is scheduled for Sep 6.
* Current nightly (1.65.0) is scheduled for Nov 3.
Changes in this PR (apart from the LLVM update):
* Pass `--set llvm.allow-old-toolchain` for many Docker images. LLVM 16 will require GCC >= 7.1, while LLVM 15 still allows older compilers with an option. Specify the option for builders still using GCC 5.4. #95026 updated some of the used toolchains, but not all.
* Use the `+atomics-32` target feature for thumbv6m.
* Explicitly link libatomic when cross-compiling LLVM to 32-bit target.
* Explicitly disable zstd support, to avoid libzstd.so dependency.
New LLVM patches ([commits](https://github.com/rust-lang/llvm-project/commits/rustc/15.0-2022-08-09)):
* [rust-only] Fix ICE with GCC 5.4 (15be58d7f0)
* [rust-only] Fix build with GCC 5.4 (774edc10fa)
* ~~[rust-only] Fix build with GCC 5.2 (1a6069a7bb)~~
* ~~[rust-only] Fix ICE with GCC 5.2 (493081f290)~~
* ~~[rust-only] Fix build with GCC 5.2 (0fc5979d73)~~
* [backported] Addition of `+atomics` target feature (57bdd9892d).
* [backported] Revert compiler-rt change that broke powerpc (9c68b43915)
* [awaiting backport] Fix RelLookupTableConverter on gnux32 (639388a05f / https://github.com/llvm/llvm-project/issues/57021)
Tested images: dist-x86_64-linux, armhf-gnu, arm-android, dist-s390x-linux, dist-x86_64-illumos, dist-x86_64-freebsd, wasm32, dist-x86_64-musl, dist-various-1, dist-riscv64-linux, dist-mips-linux, dist-mipsel-linux, dist-powerpc-linux, dist-aarch64-linux, dist-x86_64-apple, x86_64-msvc-1, x86_64-msvc-2, dist-various-2, dist-arm-linux
Tested up to the usual ipv6 error: test-various, i686-gnu, x86_64-gnu-nopt
r? `@ghost`
Fix flags when using clang as linker for Fuchsia
Don't add C runtime or set dynamic linker when linking with clang for
Fuchsia. Clang already does this for us.
https://reviews.llvm.org/D120026 changed atomics on thumbv6m to
use libatomic, to ensure that atomic load/store are compatible with
atomic RMW/CAS. However, Rust wants to expose only load/store
without libcalls.
https://reviews.llvm.org/D130480 added support for this behind
the +atomics-32 target feature, so enable that feature.
Add support for link-flavor rust-lld for iOS, tvOS and watchOS
This adds support for rust-lld for Apple *OS targets.
This was tested against targets ``aarch64-apple-ios`` and ``aarch64-apple-ios-sim`` with [a simple test program](https://github.com/Thog/rust-lld-apple-target_test).
It currently doesn't work with targets ``armv7-apple-ios`` and ``armv7s-apple-ios`` because of ``symbols.o`` not being generated with the correct CPU subtype. This will require changes in the ``object`` crate to expose an API.
As ``ld64.lld`` requires ``-platform_version`` with the minimal version supported and an sdk version, I made ``rustc_target::apple_base`` public to get access to ``*os_deployment_target`` helper functions and also added ``tvos_deployment_target`` as it was missing.
This adds support for rust-lld for Apple *OS targets.
This was tested against targets "aarch64-apple-ios" and "aarch64-apple-ios-sim".
For targets "armv7-apple-ios" and "armv7s-apple-ios", it doesn't link because of
"symbols.o" not being generated with the correct CPU subtype (changes in
the "object" crate needs to be done to support it).
Add tests for raw-dylib with vectorcall, and fix vectorcall code generation
* Adds tests for using `raw-dylib` (#58713) with `vectorcall`.
* Fixed code generation for `vectorcall` (parameters have to be marked with `InReg`, just like `fastcall`).
* Enabled running the `raw-dylib` `fastcall` tests when using MSVC (since I had to add support in the test for running MSVC-only tests since GCC doesn't support `vectorcall`).
Fix thumbv4t-none-eabi frame pointer setting
The `thumb_base` profile has changed since I last remember seeing it, and now it sets the frame pointer to "always keep", which is not desired for this target. Hooking a debugger to the running program is not really done, it's preferable to have the register available for actual program use, so the default "may omit" is now set.
I thought that the target was already using "may omit" when I checked on it last month, because I forgot that the target was previously based on `thumb_base` rather than `Default::default()`. I only noticed the issue just now when creating the `armv4t-none-eabi` target (https://github.com/rust-lang/rust/pull/99226), though this PR is not in any way conditional on that one.
This initial implementation handles transmutations between types with specified layouts, except when references are involved.
Co-authored-by: Igor null <m1el.2027@gmail.com>
Rollup of 6 pull requests
Successful merges:
- #99298 (Make `ui-fulldeps/gated-plugins` and `ui-fulldeps/multiple-plugins` tests stage 2 only)
- #99396 (Add some additional double-adjustment regression tests)
- #99449 (Do not resolve associated const when there is no provided value)
- #99595 (Mark atomics as unsupported on thumbv6m)
- #99627 (Lock stdout once when listing tests)
- #99638 (Remove Clean trait implementation for hir::Ty and middle::Ty)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
Mark atomics as unsupported on thumbv6m
The thumbv6m target does not support atomics. Historically, LLVM
had a bug where atomic load/stores for this target were emitted
as plain load/stores rather than as libatomic calls. This was
fixed in https://reviews.llvm.org/D120026, which will be part of
LLVM 15. As we require that "atomic support" does not use libatomic,
we need to indicate that this target does not have native atomics.
Add support for LLVM ShadowCallStack.
LLVMs ShadowCallStack provides backward edge control flow integrity protection by using a separate shadow stack to store and retrieve a function's return address.
LLVM currently only supports this for AArch64 targets. The x18 register is used to hold the pointer to the shadow stack, and therefore this only works on ABIs which reserve x18. Further details are available in the [LLVM ShadowCallStack](https://clang.llvm.org/docs/ShadowCallStack.html) docs.
# Usage
`-Zsanitizer=shadow-call-stack`
# Comments/Caveats
* Currently only enabled for the aarch64-linux-android target
* Requires the platform to define a runtime to initialize the shadow stack, see the [LLVM docs](https://clang.llvm.org/docs/ShadowCallStack.html) for more detail.
The thumbv6m target does not support atomics. Historically, LLVM
had a bug where atomic load/stores for this target were emitted
as plain load/stores rather than as libatomic calls. This was
fixed in https://reviews.llvm.org/D120026, which will be part of
LLVM 15. As we require that "atomic support" does not use libatomic,
we need to indicate that this target does not have native atomics.
Use constant eval to do strict mem::uninit/zeroed validity checks
I'm not sure about the code organisation here, I just dumped the check in rustc_const_eval at the root. Not hard to move it elsewhere, in any case.
Also, this means cranelift codegen intrinsics lose the strict checks, since they don't seem to depend on rustc_const_eval, and I didn't see a point in keeping around two copies.
I also left comments in the is_zero_valid methods about "uhhh help how do i do this", those apply to both methods equally.
Also rustc_codegen_ssa now depends on rustc_const_eval... is this okay?
Pinging `@RalfJung` since you were the one who mentioned this to me, so I'm assuming you're interested.
Haven't had a chance to run full tests on this since it's really warm, and it's 1AM, I'll check out any failures/comments in the morning :)
DWARF version 5 brings a number of improvements over version 4. Quoting from
the announcement [1]:
> Version 5 incorporates improvements in many areas: better data compression,
> separation of debugging data from executable files, improved description of
> macros and source files, faster searching for symbols, improved debugging
> optimized code, as well as numerous improvements in functionality and
> performance.
On platforms where DWARF version 5 is supported (Linux, primarily), this commit
adds support for it behind a new `-Z dwarf-version=5` flag.
[1]: https://dwarfstd.org/Public_Review.php
parameterized on target details to decide value-extension policy on calls, in order to address how Apple's aarch64 ABI differs from that on Linux and Windows.
Updated to incorporate review feedback: adjust comment on new enum specifying
param extension policy.
Updated to incorporate review feedback: shorten enum names and those of its
variants to make it less unwieldy.
placate tidy.
