Implement `for<>` lifetime binder for closures
This PR implements RFC 3216 ([TI](https://github.com/rust-lang/rust/issues/97362)) and allows code like the following:
```rust
let _f = for<'a, 'b> |a: &'a A, b: &'b B| -> &'b C { b.c(a) };
// ^^^^^^^^^^^--- new!
```
cc ``@Aaron1011`` ``@cjgillot``
Use a bitset instead of a hash map in HIR ID validator
The hashset insertion was slightly hot in incr patched runs, but it seems unnecessary to use a hashset here, as it just checks that a dense set of N integers was seen.
I'm not sure if it's possible to know the amount of items beforehand to preallocate the bitset? I suppose not.
lints: mostly translatable diagnostics
As lints are created slightly differently than other diagnostics, intended to try make them translatable first and then look into the applicability of diagnostic structs but ended up just making most of the diagnostics in the crate translatable (which will still be useful if I do make a lot of them structs later anyway).
r? ``@compiler-errors``
Rewrite dead-code pass to avoid fetching HIR.
This allows to get a more uniform handling of spans, and to simplify the grouping of diagnostics for variants and fields.
Accept `DiagnosticMessage` in `LintDiagnosticBuilder::build` so that
lints can be built with translatable diagnostic messages.
Signed-off-by: David Wood <david.wood@huawei.com>
Fixup missing renames from `#[main]` to `#[rustc_main]`
In #84217 `#[main]` was removed and replaced with `#[rustc_main]`. In some places the rename was forgotten, which makes the current code confusing, because at first glance it seems that `#[main]` is still around. Perform the renames also in these places.
I noticed this (after first being confused by it) when working on #97802.
r? `@petrochenkov`
(since you reviewed the other PR)
rustc_target: Remove some redundant target properties
`is_like_emscripten` is equivalent to `os == "emscripten"`, so it's removed.
`is_like_fuchsia` is equivalent to `os == "fuchsia"`, so it's removed.
`is_like_osx` also falls into the same category and is equivalent to `vendor == "apple"`, but it's commonly used so I kept it as is for now.
`is_like_(solaris,windows,wasm)` are combinations of different operating systems or architectures (see compiler/rustc_target/src/spec/tests/tests_impl.rs) so they are also kept as is.
I think `is_like_wasm` (and maybe `is_like_osx`) are sufficiently closed sets, so we can remove these fields as well and replace them with methods like `fn is_like_wasm() { arch == "wasm32" || arch == "wasm64" }`.
On other hand, `is_like_solaris` and `is_like_windows` are sufficiently open and I can imagine custom targets introducing other values for `os`.
This is kind of a gray area.
In fc357039f9 `#[main]` was removed and replaced with `#[rustc_main]`.
In some place the rename was forgotten, which makes the current code
confusing, because at first glance it seems that `#[main]` is still
around. Perform the renames also in these places.
add comments in `store_dead_field_or_variant`
support multiple log level
add a item ident label
fix ui tests
fix a ui test
fix a rustdoc ui test
use let chain
refactor: remove `store_dead_field_or_variant`
fix a tiny bug
The reference issue has been closed (the feature has been stabilized)
and things work fine without fine, it seems.
Signed-off-by: Yuki Okushi <jtitor@2k36.org>
Remove `rustc_deprecated` diagnostics
Follow-up on #95960. The diagnostics will remain until the next bootstrap, at which point people will have had six weeks to adjust.
``@rustbot`` label +A-diagnostics
r? ``@compiler-errors``
Make `ExprKind::Closure` a struct variant.
Simple refactor since we both need it to introduce additional fields in `ExprKind::Closure`.
r? ``@Aaron1011``
lint: add diagnostic translation migration lints
Introduce allow-by-default lints for checking whether diagnostics are written in
`SessionDiagnostic` or `AddSubdiagnostic` impls and whether diagnostics are translatable. These lints can be denied for modules once they are fully migrated to impls and translation.
These lints are intended to be temporary - once all diagnostics have been changed then we can just change the APIs we have and that will enforce these constraints thereafter.
r? `````@oli-obk`````
Introduce allow-by-default lints for checking whether diagnostics are
written in `SessionDiagnostic`/`AddSubdiagnostic` impls and whether
diagnostics are translatable. These lints can be denied for modules once
they are fully migrated to impls and translation.
Signed-off-by: David Wood <david.wood@huawei.com>
This commit adds a new unstable attribute, `#[doc(tuple_varadic)]`, that
shows a 1-tuple as `(T, ...)` instead of just `(T,)`, and links to a section
in the tuple primitive docs that talks about these.
Allow unstable items to be re-exported unstably without requiring the feature be enabled
Closes#94972
The diagnostic may need some work still, and I haven't added a test yet
Remove migrate borrowck mode
Closes#58781Closes#43234
# Stabilization proposal
This PR proposes the stabilization of `#![feature(nll)]` and the removal of `-Z borrowck`. Current borrow checking behavior of item bodies is currently done by first infering regions *lexically* and reporting any errors during HIR type checking. If there *are* any errors, then MIR borrowck (NLL) never occurs. If there *aren't* any errors, then MIR borrowck happens and any errors there would be reported. This PR removes the lexical region check of item bodies entirely and only uses MIR borrowck. Because MIR borrowck could never *not* be run for a compiled program, this should not break any programs. It does, however, change diagnostics significantly and allows a slightly larger set of programs to compile.
Tracking issue: #43234
RFC: https://github.com/rust-lang/rfcs/blob/master/text/2094-nll.md
Version: 1.63 (2022-06-30 => beta, 2022-08-11 => stable).
## Motivation
Over time, the Rust borrow checker has become "smarter" and thus allowed more programs to compile. There have been three different implementations: AST borrowck, MIR borrowck, and polonius (well, in progress). Additionally, there is the "lexical region resolver", which (roughly) solves the constraints generated through HIR typeck. It is not a full borrow checker, but does emit some errors.
The AST borrowck was the original implementation of the borrow checker and was part of the initially stabilized Rust 1.0. In mid 2017, work began to implement the current MIR borrow checker and that effort ompleted by the end of 2017, for the most part. During 2018, efforts were made to migrate away from the AST borrow checker to the MIR borrow checker - eventually culminating into "migrate" mode - where HIR typeck with lexical region resolving following by MIR borrow checking - being active by default in the 2018 edition.
In early 2019, migrate mode was turned on by default in the 2015 edition as well, but with MIR borrowck errors emitted as warnings. By late 2019, these warnings were upgraded to full errors. This was followed by the complete removal of the AST borrow checker.
In the period since, various errors emitted by the MIR borrow checker have been improved to the point that they are mostly the same or better than those emitted by the lexical region resolver.
While there do remain some degradations in errors (tracked under the [NLL-diagnostics tag](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-diagnostics), those are sufficiently small and rare enough that increased flexibility of MIR borrow check-only is now a worthwhile tradeoff.
## What is stabilized
As said previously, this does not fundamentally change the landscape of accepted programs. However, there are a [few](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-fixed-by-NLL) cases where programs can compile under `feature(nll)`, but not otherwise.
There are two notable patterns that are "fixed" by this stabilization. First, the `scoped_threads` feature, which is a continutation of a pre-1.0 API, can sometimes emit a [weird lifetime error](https://github.com/rust-lang/rust/issues/95527) without NLL. Second, actually seen in the standard library. In the `Extend` impl for `HashMap`, there is an implied bound of `K: 'a` that is available with NLL on but not without - this is utilized in the impl.
As mentioned before, there are a large number of diagnostic differences. Most of them are better, but some are worse. None are serious or happen often enough to need to block this PR. The biggest change is the loss of error code for a number of lifetime errors in favor of more general "lifetime may not live long enough" error. While this may *seem* bad, the former error codes were just attempts to somewhat-arbitrarily bin together lifetime errors of the same type; however, on paper, they end up being roughly the same with roughly the same kinds of solutions.
## What isn't stabilized
This PR does not completely remove the lexical region resolver. In the future, it may be possible to remove that (while still keeping HIR typeck) or to remove it together with HIR typeck.
## Tests
Many test outputs get updated by this PR. However, there are number of tests specifically geared towards NLL under `src/test/ui/nll`
## History
* On 2017-07-14, [tracking issue opened](https://github.com/rust-lang/rust/issues/43234)
* On 2017-07-20, [initial empty MIR pass added](https://github.com/rust-lang/rust/pull/43271)
* On 2017-08-29, [RFC opened](https://github.com/rust-lang/rfcs/pull/2094)
* On 2017-11-16, [Integrate MIR type-checker with NLL](https://github.com/rust-lang/rust/pull/45825)
* On 2017-12-20, [NLL feature complete](https://github.com/rust-lang/rust/pull/46862)
* On 2018-07-07, [Don't run AST borrowck on mir mode](https://github.com/rust-lang/rust/pull/52083)
* On 2018-07-27, [Add migrate mode](https://github.com/rust-lang/rust/pull/52681)
* On 2019-04-22, [Enable migrate mode on 2015 edition](https://github.com/rust-lang/rust/pull/59114)
* On 2019-08-26, [Don't downgrade errors on 2015 edition](https://github.com/rust-lang/rust/pull/64221)
* On 2019-08-27, [Remove AST borrowck](https://github.com/rust-lang/rust/pull/64790)
Add E0788 for improper #[no_coverage] usage
Essentially, this adds proper checking for the attribute (tracking issue #84605) and throws errors when it's put in obviously-wrong places, like on struct or const definitions. Most of the code is taken directly from the checks for the `#[inline]` attribute, since it's very similar.
Right now, the code only checks at the function level, but it seems reasonable to allow adding `#[no_coverage]` to individual blocks or expressions, so, for now those just throw `unused_attributes` warnings. Similarly, since there was a lot of desire to eventually allow recursive definitions as well on modules and impl blocks, these also throw `unused_attributes` instead of an error.
I'm not sure if anything has to be done since this error is technically for an unstable feature, but since an error for using unstable features will show up anyway, I think it's okay.
This is the first big piece needed for stabilising this attribute, although I personally would like to explore renaming it to `#[coverage(never)]` on a separate PR, which I will offer soon. There's a lot of discussion still to be had about that, which is why it will be kept separate.
I don't think much is needed besides adding this simple check and a UI test, but let me know if there's something else that should be added to make this happen.
Replace `#[default_method_body_is_const]` with `#[const_trait]`
pulled out of #96077
related issues: #67792 and #92158
cc `@fee1-dead`
This is groundwork to only allowing `impl const Trait` for traits that are marked with `#[const_trait]`. This is necessary to prevent adding a new default method from becoming a breaking change (as it could be a non-const fn).
Add support for embedding pretty printers via `#[debugger_visualizer]` attribute
Initial support for [RFC 3191](https://github.com/rust-lang/rfcs/pull/3191) in PR https://github.com/rust-lang/rust/pull/91779 was scoped to supporting embedding NatVis files using a new attribute. This PR implements the pretty printer support as stated in the RFC mentioned above.
This change includes embedding pretty printers in the `.debug_gdb_scripts` just as the pretty printers for rustc are embedded today. Also added additional tests for embedded pretty printers. Additionally cleaned up error checking so all error checking is done up front regardless of the current target.
RFC: https://github.com/rust-lang/rfcs/pull/3191
Ensure all error checking for `#[debugger_visualizer]` is done up front and not when the `debugger_visualizer` query is run.
Clean up potential ODR violations when embedding pretty printers into the `__rustc_debug_gdb_scripts_section__` section.
Respond to PR comments and update documentation.
Move the extended lifetime resolution into typeck context
Related to #15023
This PR is based on the [idea](https://github.com/rust-lang/rust/issues/15023#issuecomment-1070931433) of #15023 by `@nikomatsakis.`
This PR specifically proposes to
- Delay the resolution of scopes of rvalues to a later stage, so that enough type information is available to refine those scopes based on relationships of lifetimes.
- Highlight relevant parts that would help future reviews on the next installments of works to fully implement a solution to RFC 66.
Implement proper stability check for const impl Trait, fall back to unstable const when undeclared
Continuation of #93960
`@jhpratt` it looks to me like the test was simply not testing for the failure you were looking for? Your checks actually do the right thing for const traits?
This alters the diagnostics a bit, as the trait method is still stable.
The only thing this check does is ensure that compilation fails if a
trait implementation is declared const-stable.
Rather than deferring to const eval for checking if a trait is const, we
now check up-front. This allows the error to be emitted earlier, notably
at the same time as other stability checks.
Also included in this commit is a change of the default const stability
level to UNstable. Previously, an item that was `const` but did not
explicitly state it was unstable was implicitly stable.
Add a query for checking whether a function is an intrinsic.
work towards #93145
This will reduce churn when we add more ways to declare intrinsics
r? `@scottmcm`
Cleanup `DebuggerVisualizerFile` type and other minor cleanup of queries.
Merge the queries for debugger visualizers into a single query.
Revert move of `resolve_path` to `rustc_builtin_macros`. Update dependencies in Cargo.toml for `rustc_passes`.
Respond to PR comments. Load visualizer files into opaque bytes `Vec<u8>`. Debugger visualizers for dynamically linked crates should not be embedded in the current crate.
Update the unstable book with the new feature. Add the tracking issue for the debugger_visualizer feature.
Respond to PR comments and minor cleanups.
Only crate root def-ids don't have a parent, and in majority of cases the argument of `DefIdTree::parent` cannot be a crate root.
So we now panic by default in `parent` and introduce a new non-panicing function `opt_parent` for cases where the argument can be a crate root.
Same applies to `local_parent`/`opt_local_parent`.
Generate synthetic object file to ensure all exported and used symbols participate in the linking
Fix#50007 and #47384
This is the synthetic object file approach that I described in https://github.com/rust-lang/rust/pull/95363#issuecomment-1079932354, allowing all exported and used symbols to be linked while still allowing them to be GCed.
Related #93791, #95363
r? `@petrochenkov`
cc `@carbotaniuman`
Add `BoundKind` in `visit_param_bounds` to check questions in bounds
From the FIXME in the impl of `AstValidator`. Better bound checks by adding `BoundCtxt` type parameter to `visit_param_bound`
cc `@ecstatic-morse`
Stop using CRATE_DEF_INDEX outside of metadata encoding.
`CRATE_DEF_ID` and `CrateNum::as_def_id` are almost always what we want. We should not manipulate raw `DefIndex` outside of metadata encoding.
Refactor HIR item-like traversal (part 1)
Issue #95004
- Create hir_crate_items query which traverses tcx.hir_crate(()).owners to return a hir::ModuleItems
- use tcx.hir_crate_items in tcx.hir().items() to return an iterator of hir::ItemId
- use tcx.hir_crate_items to introduce a tcx.hir().par_items(impl Fn(hir::ItemId)) to traverse all items in parallel;
Signed-off-by: Miguel Guarniz <mi9uel9@gmail.com>
cc `@cjgillot`
Implement sym operands for global_asm!
Tracking issue: #93333
This PR is pretty much a complete rewrite of `sym` operand support for inline assembly so that the same implementation can be shared by `asm!` and `global_asm!`. The main changes are:
- At the AST level, `sym` is represented as a special `InlineAsmSym` AST node containing a path instead of an `Expr`.
- At the HIR level, `sym` is split into `SymStatic` and `SymFn` depending on whether the path resolves to a static during AST lowering (defaults to `SynFn` if `get_early_res` fails).
- `SymFn` is just an `AnonConst`. It runs through typeck and we just collect the resulting type at the end. An error is emitted if the type is not a `FnDef`.
- `SymStatic` directly holds a path and the `DefId` of the `static` that it is pointing to.
- The representation at the MIR level is mostly unchanged. There is a minor change to THIR where `SymFn` is a constant instead of an expression.
- At the codegen level we need to apply the target's symbol mangling to the result of `tcx.symbol_name()` depending on the target. This is done by calling the LLVM name mangler, which handles all of the details.
- On Mach-O, all symbols have a leading underscore.
- On x86 Windows, different mangling is used for cdecl, stdcall, fastcall and vectorcall.
- No mangling is needed on other platforms.
r? `@nagisa`
cc `@eddyb`
